@@ -92,5 +92,27 @@
read-only;
};
};
+
+ pci@50000000 {
+ status = "okay";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 1>,
+ <0x6000 0 0 4 &pci_intc 2>;
+ };
};
};
@@ -104,5 +104,47 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pci@50000000 {
+ compatible = "cortina,gemini-pci", "faraday,ftpci100";
+ /*
+ * The first 256 bytes in the IO range is actually used
+ * to configure the host bridge.
+ */
+ reg = <0x50000000 0x100>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ status = "disabled";
+
+ bus-range = <0x00 0xff>;
+ /* PCI ranges mappings */
+ ranges =
+ /* 1MiB I/O space 0x50000000-0x500fffff */
+ <0x01000000 0 0 0x50000000 0 0x00100000>,
+ /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+ <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+ /* DMA ranges */
+ dma-ranges =
+ /* 128MiB at 0x00000000-0x07ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+ /* 64MiB at 0x00000000-0x03ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+ /* 64MiB at 0x00000000-0x03ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ /*
+ * This PCI host bridge variant has a cascaded interrupt
+ * controller embedded in the host bridge.
+ */
+ pci_intc: interrupt-controller {
+ interrupt-parent = <&intcon>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
};
};
The Cortina Gemini has an internal PCI root bus, add this to the device tree, and add interrupt mapping (swizzling) to the relevant systems device trees. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Feng-Hsin Chiang <john453@faraday-tech.com> Cc: Greentime Hu <green.hu@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Change compatible string to "cortina,gemini-pci", "faraday,ftpci100"; - Add "dma-ranges" property, after deciphering that some hardcoded constants in the driver is really about this. ChangeLog v1->v2: - Change bus-range to <0x00 0xff> - Drop the three extra IRQs that are unused - Implement the right interrupt mapping/swizzling - Push the interrupt mapping down to each affected system, only SQ201 for now. PCI maintainers: this is FYI only, I will funnel this to the ARM SoC tree once we are done with the PCI driver. --- arch/arm/boot/dts/gemini-sq201.dts | 22 ++++++++++++++++++++ arch/arm/boot/dts/gemini.dtsi | 42 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+) -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html