| Message ID | 1340188810-18871-8-git-send-email-rajeshwari.s@samsung.com |
|---|---|
| State | New |
| Headers | show |
Hi, 2012/6/20 Rajeshwari Shinde <rajeshwari.s@samsung.com>: > MPLL clock-out of Exynos5250 Rev 1.0 is always at 1.6GHz. > Adjust the divisor value to get 800MHz as needed by devices > like UART etc > > Signed-off-by: Hatim Ali <hatim.rv@samsung.com> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > --- > arch/arm/cpu/armv7/exynos/clock.c | 12 +++++++++++- > arch/arm/include/asm/arch-exynos/clock.h | 3 +++ > 2 files changed, 14 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c > index 330bd75..dbd5f11 100644 > --- a/arch/arm/cpu/armv7/exynos/clock.c > +++ b/arch/arm/cpu/armv7/exynos/clock.c > @@ -98,7 +98,7 @@ static unsigned long exynos5_get_pll_clk(int pllreg) > struct exynos5_clock *clk = > (struct exynos5_clock *)samsung_get_base_clock(); > unsigned long r, m, p, s, k = 0, mask, fout; > - unsigned int freq; > + unsigned int freq, pll_div2_sel, mpll_fout_sel; > > switch (pllreg) { > case APLL: > @@ -155,6 +155,16 @@ static unsigned long exynos5_get_pll_clk(int pllreg) > fout = m * (freq / (p * (1 << (s - 1)))); > } > > + /* According to the user manual, in EVT1 MPLL always gives > + * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/ > + if (pllreg == MPLL) { > + pll_div2_sel = readl(&clk->pll_div2_sel); > + mpll_fout_sel = (pll_div2_sel >> MPLL_FOUT_SEL_SHIFT) > + & MPLL_FOUT_SEL_MASK; > + if (mpll_fout_sel == 0) > + fout /= 2; > + } > + I think BPLL also needs this.
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 330bd75..dbd5f11 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -98,7 +98,7 @@ static unsigned long exynos5_get_pll_clk(int pllreg) struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); unsigned long r, m, p, s, k = 0, mask, fout; - unsigned int freq; + unsigned int freq, pll_div2_sel, mpll_fout_sel; switch (pllreg) { case APLL: @@ -155,6 +155,16 @@ static unsigned long exynos5_get_pll_clk(int pllreg) fout = m * (freq / (p * (1 << (s - 1)))); } + /* According to the user manual, in EVT1 MPLL always gives + * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/ + if (pllreg == MPLL) { + pll_div2_sel = readl(&clk->pll_div2_sel); + mpll_fout_sel = (pll_div2_sel >> MPLL_FOUT_SEL_SHIFT) + & MPLL_FOUT_SEL_MASK; + if (mpll_fout_sel == 0) + fout /= 2; + } + return fout; } diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index 7cc3d5e..a34a3f0 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -594,4 +594,7 @@ struct exynos5_clock { unsigned char res109b[0xf5e4]; }; #endif + +#define MPLL_FOUT_SEL_SHIFT 4 +#define MPLL_FOUT_SEL_MASK 0x1 #endif