diff mbox series

[RESEND,v2,19/53] mtd: nand: denali: call nand_set_flash_node() to set DT node

Message ID 1490213273-8571-20-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit 63757d463ea683b469c1976032054d46cecdef09
Headers show
Series [RESEND,v2,01/53] mtd: nand: allow to set only one of ECC size and ECC strength from DT | expand

Commit Message

Masahiro Yamada March 22, 2017, 8:07 p.m. UTC 
This will allow nand_dt_init() to parse DT properties in the NAND
controller device node.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

Changes in v2: None

 drivers/mtd/nand/denali.c | 1 +
 1 file changed, 1 insertion(+)

-- 
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox series

Patch

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 24c35a6..3badb1d 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1496,6 +1496,7 @@  int denali_init(struct denali_nand_info *denali)
 	/* now that our ISR is registered, we can enable interrupts */
 	denali_set_intr_modes(denali, true);
 	mtd->name = "denali-nand";
+	nand_set_flash_node(chip, denali->dev->of_node);
 
 	/* register the driver with the NAND core subsystem */
 	chip->select_chip = denali_select_chip;