diff mbox series

[11/33] clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock

Message ID 1491286653-31193-2-git-send-email-amit.pundir@linaro.org
State Superseded
Headers show
Series None | expand

Commit Message

Amit Pundir April 4, 2017, 6:17 a.m. UTC 
From: Boris Brezillon <boris.brezillon@free-electrons.com>


The VEC clock requires needs to be set at exactly 108MHz. Allow rate
change propagation on PLLH_AUX to match this requirement wihtout
impacting other IPs (PLLH is currently only used by the HDMI encoder,
which cannot be enabled when the VEC encoder is enabled).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

Reviewed-by: Eric Anholt <eric@anholt.net>

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

(cherry picked from commit d86d46af84855403c00018be1c3e7bc190f2a6cd)
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

---
 drivers/clk/bcm/clk-bcm2835.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index df96fe6..eaf82f4 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1861,7 +1861,12 @@  static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.ctl_reg = CM_VECCTL,
 		.div_reg = CM_VECDIV,
 		.int_bits = 4,
-		.frac_bits = 0),
+		.frac_bits = 0,
+		/*
+		 * Allow rate change propagation only on PLLH_AUX which is
+		 * assigned index 7 in the parent array.
+		 */
+		.set_rate_parent = BIT(7)),
 
 	/* dsi clocks */
 	[BCM2835_CLOCK_DSI0E]	= REGISTER_PER_CLK(