diff mbox series

[Linaro-uefi,1/8] Platforms/AMD: remove /pmu node from Overdrive 1000 DTS

Message ID 20170406102941.14802-2-ard.biesheuvel@linaro.org
State New
Headers show
Series Platforms/AMD/Overdrive: switch to DtPlatformDxe | expand

Commit Message

Ard Biesheuvel April 6, 2017, 10:29 a.m. UTC
The /pmu node is removed and regenerated by the firmware, so there is
no need to have it in the template.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
 Platforms/AMD/Styx/Overdrive1000Board/FdtBlob/styx-overdrive1000.dtb | Bin 8117 -> 7969 bytes
 Platforms/AMD/Styx/Overdrive1000Board/FdtBlob/styx-overdrive1000.dts |  12 ------------
 2 files changed, 12 deletions(-)
diff mbox series

Patch

diff --git a/Platforms/AMD/Styx/Overdrive1000Board/FdtBlob/styx-overdrive1000.dtb b/Platforms/AMD/Styx/Overdrive1000Board/FdtBlob/styx-overdrive1000.dtb
index b792b2a47ca0a4482db005f2956c3e01bab098a7..ba5d494f9f815ccb9760cd99a2bdaadf6bd49eab 100644
GIT binary patch
delta 36
scmdmLztB$L0`I@K3=Hy$3=9kw3=A?N69vSWr0;ChxWTk}3bUdN0LYOFJ^%m!

delta 176
zcmZ2zx7A+Y0`I@K3=HyH85kHW7#L($OcW4fk|~(1C@8$q`Y01~L2l{f`Ap*VK)TEr
zsD^<Vh!cP~9f(1I9f(=LECvP+BsM1!n+u7}jl||bV)G)g`JikjAkA2uo5aAdnUz^a
F1^}zE65Id)

diff --git a/Platforms/AMD/Styx/Overdrive1000Board/FdtBlob/styx-overdrive1000.dts b/Platforms/AMD/Styx/Overdrive1000Board/FdtBlob/styx-overdrive1000.dts
index b1fbefefdd18..3290f65aae6a 100644
--- a/Platforms/AMD/Styx/Overdrive1000Board/FdtBlob/styx-overdrive1000.dts
+++ b/Platforms/AMD/Styx/Overdrive1000Board/FdtBlob/styx-overdrive1000.dts
@@ -55,18 +55,6 @@ 
                              <0x1 0xa 0xff04>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0x0 0x7 0x4>,
-                             <0x0 0x8 0x4>,
-                             <0x0 0x9 0x4>,
-                             <0x0 0xa 0x4>,
-                             <0x0 0xb 0x4>,
-                             <0x0 0xc 0x4>,
-                             <0x0 0xd 0x4>,
-                             <0x0 0xe 0x4>;
-	};
-
 	smb {
 		compatible = "simple-bus";
 		#address-cells = <0x2>;