@@ -30,9 +30,9 @@
#address-cells = <0x2>;
#size-cells = <0x2>;
reg = <0x0 0xe1110000 0x0 0x1000>,
- <0x0 0xe112f000 0x0 0x2000>,
- <0x0 0xe1140000 0x0 0x10000>,
- <0x0 0xe1160000 0x0 0x10000>;
+ <0x0 0xe112f000 0x0 0x2000>,
+ <0x0 0xe1140000 0x0 0x10000>,
+ <0x0 0xe1160000 0x0 0x10000>;
interrupts = <0x1 0x9 0xf04>;
ranges = <0x0 0x0 0x0 0xe1100000 0x0 0x100000>;
linux,phandle = <0x1>;
@@ -50,9 +50,9 @@
timer {
compatible = "arm,armv8-timer";
interrupts = <0x1 0xd 0xff04>,
- <0x1 0xe 0xff04>,
- <0x1 0xb 0xff04>,
- <0x1 0xa 0xff04>;
+ <0x1 0xe 0xff04>,
+ <0x1 0xb 0xff04>,
+ <0x1 0xa 0xff04>;
};
smb {
@@ -263,14 +263,14 @@
reg = <0x0 0xf0000000 0x0 0x10000000>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x1000 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x120 0x1>,
- <0x1000 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x121 0x1>,
- <0x1000 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x122 0x1>,
- <0x1000 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x123 0x1>;
+ <0x1000 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x121 0x1>,
+ <0x1000 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x122 0x1>,
+ <0x1000 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x123 0x1>;
dma-coherent;
dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
ranges = <0x1000000 0x0 0x00000000 0x0 0xefff0000 0x00 0x00010000>, /* I/O Memory (size=64K) */
- <0x2000000 0x0 0x40000000 0x0 0x40000000 0x00 0x80000000>, /* 32-bit MMIO (size=2G) */
- <0x3000000 0x1 0x00000000 0x1 0x00000000 0x7f 0x00000000>; /* 64-bit MMIO (size= 124G) */
+ <0x2000000 0x0 0x40000000 0x0 0x40000000 0x00 0x80000000>, /* 32-bit MMIO (size=2G) */
+ <0x3000000 0x1 0x00000000 0x1 0x00000000 0x7f 0x00000000>; /* 64-bit MMIO (size= 124G) */
};
ccn@0xe8000000 {
@@ -279,15 +279,15 @@
interrupts = <0x0 0x17c 0x4>;
};
- gwdt@e0bb0000 {
+ gwdt@e0bb0000 {
status = "disabled";
- compatible = "arm,sbsa-gwdt";
- reg = <0x0 0xe0bb0000 0x0 0x10000
+ compatible = "arm,sbsa-gwdt";
+ reg = <0x0 0xe0bb0000 0x0 0x10000
0x0 0xe0bc0000 0x0 0x10000>;
- reg-names = "refresh", "control";
- interrupts = <0x0 0x151 0x4>;
- interrupt-names = "ws0";
- };
+ reg-names = "refresh", "control";
+ interrupts = <0x0 0x151 0x4>;
+ interrupt-names = "ws0";
+ };
kcs@e0010000 {
status = "disabled";
@@ -340,8 +340,8 @@
status = "disabled";
compatible = "amd,xgbe-phy-seattle-v1a";
reg = <0x0 0xe1240800 0x0 0x0400>, /* SERDES RX/TX0 */
- <0x0 0xe1250000 0x0 0x0060>, /* SERDES IR 1/2 */
- <0x0 0xe12500f8 0x0 0x0004>; /* SERDES IR 2/2 */
+ <0x0 0xe1250000 0x0 0x0060>, /* SERDES IR 1/2 */
+ <0x0 0xe12500f8 0x0 0x0004>; /* SERDES IR 2/2 */
interrupts = <0x0 0x143 0x4>;
amd,speed-set = <0x0>;
amd,serdes-blwc = <0x1 0x1 0x0>;
@@ -358,8 +358,8 @@
status = "disabled";
compatible = "amd,xgbe-phy-seattle-v1a";
reg = <0x0 0xe1240c00 0x0 0x0400>, /* SERDES RX/TX0 */
- <0x0 0xe1250080 0x0 0x0060>, /* SERDES IR 1/2 */
- <0x0 0xe12500fc 0x0 0x0004>; /* SERDES IR 2/2 */
+ <0x0 0xe1250080 0x0 0x0060>, /* SERDES IR 1/2 */
+ <0x0 0xe12500fc 0x0 0x0004>; /* SERDES IR 2/2 */
interrupts = <0x0 0x142 0x4>;
amd,speed-set = <0x0>;
amd,serdes-blwc = <0x1 0x1 0x0>;
@@ -377,10 +377,10 @@
compatible = "amd,xgbe-seattle-v1a";
reg = <0x0 0xe0700000 0x0 0x80000 0x0 0xe0780000 0x0 0x80000>;
interrupts = <0x0 0x145 0x4>,
- <0x0 0x15a 0x1>,
- <0x0 0x15b 0x1>,
- <0x0 0x15c 0x1>,
- <0x0 0x15d 0x1>;
+ <0x0 0x15a 0x1>,
+ <0x0 0x15b 0x1>,
+ <0x0 0x15c 0x1>,
+ <0x0 0x15d 0x1>;
amd,per-channel-interrupt;
mac-address = [02 a1 a2 a3 a4 a5];
clocks = <0x5 0x6>;
@@ -398,10 +398,10 @@
compatible = "amd,xgbe-seattle-v1a";
reg = <0x0 0xe0900000 0x0 0x80000 0x0 0xe0980000 0x0 0x80000>;
interrupts = <0x0 0x144 0x4>,
- <0x0 0x155 0x1>,
- <0x0 0x156 0x1>,
- <0x0 0x157 0x1>,
- <0x0 0x158 0x1>;
+ <0x0 0x155 0x1>,
+ <0x0 0x156 0x1>,
+ <0x0 0x157 0x1>,
+ <0x0 0x158 0x1>;
amd,per-channel-interrupt;
mac-address = [02 b1 b2 b3 b4 b5];
clocks = <0x7 0x8>;
Use tabs consistently throughout the Overdrive 1000 DTS file. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- Platforms/AMD/Styx/Overdrive1000Board/FdtBlob/styx-overdrive1000.dts | 60 ++++++++++---------- 1 file changed, 30 insertions(+), 30 deletions(-)