diff mbox

[v3] mtd: nand: add ooblayout for old hamming layout

Message ID 20170502101900.5066-1-lynxis@fe80.eu
State Accepted
Commit 6a623e07694437ad09f382a13f76cffc32239a7f
Headers show

Commit Message

Alexander Couzens May 2, 2017, 10:19 a.m. UTC 
The old 1-bit hamming layout requires ECC data to be placed at a
fixed offset, and not necessarily at the end of the OOB area.
Add this old layout back in order to fix legacy setups.

Fixes: 41b207a70d3a ("mtd: nand: implement the default mtd_ooblayout_ops")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

---
 drivers/mtd/nand/nand_base.c | 70 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 69 insertions(+), 1 deletion(-)

-- 
2.12.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox

Patch

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index b0524f8accb6..44c0faf84426 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -139,6 +139,74 @@  const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
 };
 EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
 
+/*
+ * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
+ * are placed at a fixed offset.
+ */
+static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section)
+		return -ERANGE;
+
+	switch (mtd->oobsize) {
+	case 64:
+		oobregion->offset = 40;
+		break;
+	case 128:
+		oobregion->offset = 80;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	oobregion->length = ecc->total;
+	if (oobregion->offset + oobregion->length > mtd->oobsize)
+		return -ERANGE;
+
+	return 0;
+}
+
+static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
+					  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	int ecc_offset = 0;
+
+	if (section < 0 || section > 1)
+		return -ERANGE;
+
+	switch (mtd->oobsize) {
+	case 64:
+		ecc_offset = 40;
+		break;
+	case 128:
+		ecc_offset = 80;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (section == 0) {
+		oobregion->offset = 2;
+		oobregion->length = ecc_offset - 2;
+	} else {
+		oobregion->offset = ecc_offset + ecc->total;
+		oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
+	.ecc = nand_ooblayout_ecc_lp_hamming,
+	.free = nand_ooblayout_free_lp_hamming,
+};
+
 static int check_offs_len(struct mtd_info *mtd,
 					loff_t ofs, uint64_t len)
 {
@@ -4653,7 +4721,7 @@  int nand_scan_tail(struct mtd_info *mtd)
 			break;
 		case 64:
 		case 128:
-			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops);
 			break;
 		default:
 			WARN(1, "No oob scheme defined for oobsize %d\n",