new file mode 100644
@@ -0,0 +1,58 @@
+Cortina Gemini Reset Controller
+
+This reset controller is found in Cortina Systems CS3516 and
+the predecessor StorLink SL3516.
+
+Required properties:
+- compatible: "cortina,gemini-reset"
+- #reset-cells: Must be 1
+
+The Gemini reset controller must be identical to the system controller node.
+Apart from this it follows the standard reset controller bindings.
+
+Valid reset line values:
+
+0: DRAM controller
+1: Flash controller
+2: IDE controller
+3: RAID controller
+4: Security module
+5: GMAC0 (ethernet)
+6: GMAC1 (ethernet)
+7: PCI host bridge
+8: USB0 USB host controller
+9: USB1 USB host controller
+10: General DMA controller
+11: APB bridge
+12: LPC (Low Pin Count) controller
+13: LCD module
+14: Interrupt controller 0
+15: Interrupt controller 1
+16: RTC module
+17: Timer module
+18: UART controller
+19: SSP controller
+20: GPIO0 GPIO controller
+21: GPIO1 GPIO controller
+22: GPIO2 GPIO controller
+23: Watchdog timer
+24: External device reset
+25: CIR module (infrared)
+26: SATA0 SATA bridge
+27: SATA1 SATA bridge
+28: TVE TV Encoder module
+29: Reserved
+30: CPU1 reset
+31: Global soft reset
+
+These also have shorthand defines in the include file:
+<dt-bindings/reset/cortina,gemini-reset.h>
+
+Example:
+
+syscon: syscon@40000000 {
+ compatible = "cortina,gemini-syscon", "cortina,gemini-reset",
+ "syscon", "simple-mfd";
+ reg = <0x40000000 0x1000>;
+ #reset-cells = <1>;
+};
new file mode 100644
@@ -0,0 +1,36 @@
+#ifndef _DT_BINDINGS_RESET_CORTINA_GEMINI_H
+#define _DT_BINDINGS_RESET_CORTINA_GEMINI_H
+
+#define GEMINI_RESET_DRAM 0
+#define GEMINI_RESET_FLASH 1
+#define GEMINI_RESET_IDE 2
+#define GEMINI_RESET_RAID 3
+#define GEMINI_RESET_SECURITY 4
+#define GEMINI_RESET_GMAC0 5
+#define GEMINI_RESET_GMAC1 6
+#define GEMINI_RESET_PCI 7
+#define GEMINI_RESET_USB0 8
+#define GEMINI_RESET_USB1 9
+#define GEMINI_RESET_DMAC 10
+#define GEMINI_RESET_APB 11
+#define GEMINI_RESET_LPC 12
+#define GEMINI_RESET_LCD 13
+#define GEMINI_RESET_INTCON0 14
+#define GEMINI_RESET_INTCON1 15
+#define GEMINI_RESET_RTC 16
+#define GEMINI_RESET_TIMER 17
+#define GEMINI_RESET_UART 18
+#define GEMINI_RESET_SSP 19
+#define GEMINI_RESET_GPIO0 20
+#define GEMINI_RESET_GPIO1 21
+#define GEMINI_RESET_GPIO2 22
+#define GEMINI_RESET_WDOG 23
+#define GEMINI_RESET_EXTERN 24
+#define GEMINI_RESET_CIR 25
+#define GEMINI_RESET_SATA0 26
+#define GEMINI_RESET_SATA1 27
+#define GEMINI_RESET_TVE 28
+#define GEMINI_RESET_CPU1 30
+#define GEMINI_RESET_GLOBAL 31
+
+#endif
This is a simple reset controller in a single 32bit register. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Move the reset controller node to be the same as the syscon node, no need for a specific child node. - Add an include file with nice #defines. --- .../bindings/reset/cortina,gemini-reset.txt | 58 ++++++++++++++++++++++ include/dt-bindings/reset/cortina,gemini-reset.h | 36 ++++++++++++++ 2 files changed, 94 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/cortina,gemini-reset.txt create mode 100644 include/dt-bindings/reset/cortina,gemini-reset.h -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html