mbox series

[RESEND,0/4] Add a better separation between i.MX8 families

Message ID 20200210095817.13226-1-daniel.baluta@oss.nxp.com
Headers show
Series Add a better separation between i.MX8 families | expand


Daniel Baluta Feb. 10, 2020, 9:58 a.m. UTC
From: Daniel Baluta <daniel.baluta@nxp.com>

So far the implementation was designed to support  a generic platform
named i.MX8. Anyhow, now working with specific i.MX8 instances we need
to account for the differences.

i.MX8 naming can be confusing at the first glance, so we need to have
a clean separation between different platforms.

Here is the split of i.MX8 per platforms. Notice that i.MX8 names
the entire family, but also a sub-family.

├── imx8
│   └── imx8qm (*)
├── imx8m
│   ├── imx8mm
│   ├── imx8mn
│   ├── imx8mp (*)
│   └── imx8mq
└── imx8x
    └── imx8qxp (*)

Platforms marked with (*) contain a DSP. In the future there might be
more platforms.

This patchseries does the following:
	* renames imx8 to imx8x (because the only supported platform now
        is imx8qxp).
        * adds support for imx8 (which is imx8qm)

Paul Olaru (4):
  ASoC: SOF: Rename i.MX8 platform to i.MX8X
  ASoC: SOF: imx8: Add ops for i.MX8QM
  ASoC: SOF: Add i.MX8QM device descriptor
  dt-bindings: dsp: fsl: Add fsl,imx8qm-dsp entry

 .../devicetree/bindings/dsp/fsl,dsp.yaml      |  1 +
 sound/soc/sof/imx/imx8.c                      | 57 ++++++++++++++++++-
 sound/soc/sof/sof-of-dev.c                    | 10 ++++
 3 files changed, 65 insertions(+), 3 deletions(-)