mbox series

[0/5] soundwire: fix ACK/NAK handling and improve log

Message ID 20210115053738.22630-1-yung-chuan.liao@linux.intel.com
Headers show
Series soundwire: fix ACK/NAK handling and improve log | expand

Message

Liao, Bard Jan. 15, 2021, 5:37 a.m. UTC 
The existing code reports a NAK only when ACK=0
This is not aligned with the SoundWire 1.x specifications.

Table 32 in the SoundWire 1.2 specification shows that a Device shall
not set NAK=1 if ACK=1. But Table 33 shows the Combined Response
may very well be NAK=1/ACK=1, e.g. if another Device than the one
addressed reports a parity error.

NAK=1 signals a 'Command_Aborted', regardless of the ACK bit value.

Move the tests for NAK so that the NAK=1/ACK=1 combination is properly
detected according to the specification.

Also, improve the demesg log to get more information for debugging.

Bard Liao (1):
  soundwire: bus: add more details to track failed transfers

Pierre-Louis Bossart (4):
  soundwire: use consistent format for Slave devID logs
  soundwire: cadence: add status in dev_dbg 'State change' log
  soundwire: cadence: fix ACK/NAK handling
  soundwire: cadence: adjust verbosity in response handling

 drivers/soundwire/bus.c            | 11 ++++++-----
 drivers/soundwire/cadence_master.c | 29 +++++++++++++++--------------
 drivers/soundwire/slave.c          | 10 ++++------
 3 files changed, 25 insertions(+), 25 deletions(-)