| Message ID | 20210815154935.101178-1-hdegoede@redhat.com |
|---|---|
| Headers | show |
| Series | ASoC: Intel/rt5640: Add support for HP Elite Pad 1000G2 jack-detect | expand |
On Sun, 15 Aug 2021 17:49:30 +0200, Hans de Goede wrote: > The HP Elitepad 1000 G2 tablet has 2 headset jacks: > > 1. on the dock which uses the output of the codecs built-in HP-amp + > the standard IN2 input which is always used with the headset-jack. > > 2. on the tablet itself, this uses the line-out of the codec + an external > HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for > the headset-mic. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/5] ASoC: rt5640: Move rt5640_disable_jack_detect() up in the rt5640.c file commit: 5caab9f48b96f6998fb23d38a7b57fca91ef1653 [2/5] ASoC: rt5640: Delay requesting IRQ until the machine-drv calls set_jack commit: 15d54840ecf6f00061d03180394a0a21ff8ffa48 [3/5] ASoC: rt5640: Add optional hp_det_gpio parameter to rt5640_detect_headset() commit: d21213b4503ea66777313e4345e116cc8a5366bf [4/5] ASoC: rt5640: Add rt5640_set_ovcd_params() helper commit: e3f2a6603a982467601e0831d706786ed1ade833 [5/5] ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect commit: 9ba00856686ade106afee2884b5e8ac1e09d137a All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
The HP Elitepad 1000 G2 tablet has 2 headset jacks: 1. on the dock which uses the output of the codecs built-in HP-amp + the standard IN2 input which is always used with the headset-jack. 2. on the tablet itself, this uses the line-out of the codec + an external HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for the headset-mic. The codec's GPIO1 is also its only IRQ output pin, so this means that the codec's IRQ cannot be used on this tablet. Instead the jack-detect is connected directly to GPIOs on the main SoC. The dock has a helper chip which also detects if a headset-mic is present or not, so there are 2 GPIOs for the jack-detect status of the dock. The tablet jack uses a single GPIO which indicates if a jack is present or not. Differentiating between between headphones vs a headset on the tablet jack is done by using the usual mic-bias over-current-detection mechanism. Regards, Hans Hans de Goede (5): ASoC: rt5640: Move rt5640_disable_jack_detect() up in the rt5640.c file ASoC: rt5640: Delay requesting IRQ until the machine-drv calls set_jack ASoC: rt5640: Add optional hp_det_gpio parameter to rt5640_detect_headset() ASoC: rt5640: Add rt5640_set_ovcd_params() helper ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect sound/soc/codecs/rt5640.c | 133 ++++++++++++----------- sound/soc/codecs/rt5640.h | 6 ++ sound/soc/intel/boards/bytcr_rt5640.c | 146 +++++++++++++++++++++++++- 3 files changed, 225 insertions(+), 60 deletions(-)