diff mbox series

[18/31] ALSA: usb-audio: scarlett2: Add Gen 3 MSD mode switch

Message ID 06f41cdc8c843a1c0ab0f7a1c01160ebbe7a7cdb.1624294591.git.g@b4.vu
State Superseded
Headers show
Series Refactor Scarlett Gen 2 support and add Scarlett Gen 3 support | expand

Commit Message

Geoffrey D. Bennett June 21, 2021, 6:09 p.m. UTC
Add a control to disable the Gen 3 MSD mode so that the full
functionality of the device is available. Don't create the other
controls until MSD mode is disabled.

Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
---
 sound/usb/mixer_scarlett_gen2.c | 120 +++++++++++++++++++++++++++++++-
 1 file changed, 117 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index a4f92291b74f..6995d692c6b2 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -44,12 +44,13 @@ 
  * interface during driver initialisation added in May 2021 (thanks to
  * Vladimir Sadovnikov for figuring out how).
  *
- * This ALSA mixer gives access to:
+ * This ALSA mixer gives access to (model-dependent):
  *  - input, output, mixer-matrix muxes
  *  - mixer-matrix gain stages
  *  - gain/volume/mute controls
  *  - level meters
  *  - line/inst level and pad controls
+ *  - disable/enable MSD mode
  *
  * <ditaa>
  *    /--------------\    18chn            20chn     /--------------\
@@ -102,6 +103,14 @@ 
  *  \--------------/
  * </ditaa>
  *
+ * Gen 3 devices have a Mass Storage Device (MSD) mode where a small
+ * disk with registration and driver download information is presented
+ * to the host. To access the full functionality of the device without
+ * proprietary software, MSD mode can be disabled by:
+ * - holding down the 48V button for five seconds while powering on
+ *   the device, or
+ * - using this driver and alsamixer to change the "MSD Mode" setting
+ *   to Off and power-cycling the device
  */
 
 #include <linux/slab.h>
@@ -120,6 +129,9 @@ 
 /* device_setup value to enable */
 #define SCARLETT2_ENABLE 0x01
 
+/* device_setup value to allow turning MSD mode back on */
+#define SCARLETT2_MSD_ENABLE 0x02
+
 /* some gui mixers can't handle negative ctl values */
 #define SCARLETT2_VOLUME_BIAS 127
 
@@ -279,6 +291,12 @@  struct scarlett2_mux_entry {
 struct scarlett2_device_info {
 	u32 usb_id; /* USB device identifier */
 
+	/* Gen 3 devices have an internal MSD mode switch that needs
+	 * to be disabled in order to access the full functionality of
+	 * the device.
+	 */
+	u8 has_msd_mode;
+
 	/* line out hw volume is sw controlled */
 	u8 line_out_hw_vol;
 
@@ -327,6 +345,7 @@  struct scarlett2_data {
 	u8 level_switch[SCARLETT2_LEVEL_SWITCH_MAX];
 	u8 pad_switch[SCARLETT2_PAD_SWITCH_MAX];
 	u8 dim_mute[SCARLETT2_DIM_MUTE_COUNT];
+	u8 msd_switch;
 	struct snd_kcontrol *sync_ctl;
 	struct snd_kcontrol *master_vol_ctl;
 	struct snd_kcontrol *vol_ctls[SCARLETT2_ANALOGUE_MAX];
@@ -489,6 +508,7 @@  static const struct scarlett2_device_info s18i20_gen2_info = {
 static const struct scarlett2_device_info s4i4_gen3_info = {
 	.usb_id = USB_ID(0x1235, 0x8212),
 
+	.has_msd_mode = 1,
 	.level_input_count = 2,
 	.pad_input_count = 2,
 
@@ -530,6 +550,7 @@  static const struct scarlett2_device_info s4i4_gen3_info = {
 static const struct scarlett2_device_info s8i6_gen3_info = {
 	.usb_id = USB_ID(0x1235, 0x8213),
 
+	.has_msd_mode = 1,
 	.level_input_count = 2,
 	.pad_input_count = 2,
 
@@ -578,6 +599,7 @@  static const struct scarlett2_device_info s8i6_gen3_info = {
 static const struct scarlett2_device_info s18i8_gen3_info = {
 	.usb_id = USB_ID(0x1235, 0x8214),
 
+	.has_msd_mode = 1,
 	.line_out_hw_vol = 1,
 	.level_input_count = 2,
 	.pad_input_count = 2,
@@ -639,6 +661,7 @@  static const struct scarlett2_device_info s18i8_gen3_info = {
 static const struct scarlett2_device_info s18i20_gen3_info = {
 	.usb_id = USB_ID(0x1235, 0x8215),
 
+	.has_msd_mode = 1,
 	.line_out_hw_vol = 1,
 	.level_input_count = 2,
 	.pad_input_count = 8,
@@ -786,7 +809,8 @@  enum {
 	SCARLETT2_CONFIG_SW_HW_SWITCH = 3,
 	SCARLETT2_CONFIG_LEVEL_SWITCH = 4,
 	SCARLETT2_CONFIG_PAD_SWITCH = 5,
-	SCARLETT2_CONFIG_COUNT = 6
+	SCARLETT2_CONFIG_MSD_SWITCH = 6,
+	SCARLETT2_CONFIG_COUNT = 7
 };
 
 /* Location, size, and activation command number for the configuration
@@ -817,6 +841,9 @@  static const struct scarlett2_config
 
 	[SCARLETT2_CONFIG_PAD_SWITCH] = {
 		.offset = 0x84, .size = 1, .activate = 8 },
+
+	[SCARLETT2_CONFIG_MSD_SWITCH] = {
+		.offset = 0x9d, .size = 1, .activate = 6 },
 };
 
 /* proprietary request/response format */
@@ -1016,7 +1043,8 @@  static int scarlett2_usb_set_config(
 		return err;
 
 	/* Schedule the change to be written to NVRAM */
-	schedule_delayed_work(&private->work, msecs_to_jiffies(2000));
+	if (config_item->activate != SCARLETT2_USB_CONFIG_SAVE)
+		schedule_delayed_work(&private->work, msecs_to_jiffies(2000));
 
 	return 0;
 }
@@ -2346,6 +2374,71 @@  static int scarlett2_add_meter_ctl(struct usb_mixer_interface *mixer)
 				     "Level Meter", NULL);
 }
 
+/*** MSD Controls ***/
+
+static int scarlett2_msd_ctl_get(struct snd_kcontrol *kctl,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kctl->private_data;
+	struct scarlett2_data *private = elem->head.mixer->private_data;
+
+	ucontrol->value.integer.value[0] = private->msd_switch;
+	return 0;
+}
+
+static int scarlett2_msd_ctl_put(struct snd_kcontrol *kctl,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kctl->private_data;
+	struct usb_mixer_interface *mixer = elem->head.mixer;
+	struct scarlett2_data *private = mixer->private_data;
+
+	int oval, val, err = 0;
+
+	mutex_lock(&private->data_mutex);
+
+	oval = private->msd_switch;
+	val = !!ucontrol->value.integer.value[0];
+
+	if (oval == val)
+		goto unlock;
+
+	private->msd_switch = val;
+
+	/* Send switch change to the device */
+	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_MSD_SWITCH,
+				       0, val);
+
+unlock:
+	mutex_unlock(&private->data_mutex);
+	return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_msd_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "",
+	.info = snd_ctl_boolean_mono_info,
+	.get  = scarlett2_msd_ctl_get,
+	.put  = scarlett2_msd_ctl_put,
+};
+
+static int scarlett2_add_msd_ctl(struct usb_mixer_interface *mixer)
+{
+	struct scarlett2_data *private = mixer->private_data;
+	const struct scarlett2_device_info *info = private->info;
+
+	if (!info->has_msd_mode)
+		return 0;
+
+	/* If MSD mode is off, hide the switch by default */
+	if (!private->msd_switch && !(mixer->chip->setup & SCARLETT2_MSD_ENABLE))
+		return 0;
+
+	/* Add MSD control */
+	return scarlett2_add_new_ctl(mixer, &scarlett2_msd_ctl,
+				     0, 1, "MSD Mode", NULL);
+}
+
 /*** Cleanup/Suspend Callbacks ***/
 
 static void scarlett2_private_free(struct usb_mixer_interface *mixer)
@@ -2483,6 +2576,18 @@  static int scarlett2_read_configs(struct usb_mixer_interface *mixer)
 	struct scarlett2_usb_volume_status volume_status;
 	int err, i;
 
+	if (info->has_msd_mode) {
+		err = scarlett2_usb_get_config(
+			mixer, SCARLETT2_CONFIG_MSD_SWITCH,
+			1, &private->msd_switch);
+		if (err < 0)
+			return err;
+
+		/* no other controls are created if MSD mode is on */
+		if (private->msd_switch)
+			return 0;
+	}
+
 	err = scarlett2_update_input_other(mixer);
 	if (err < 0)
 		return err;
@@ -2705,6 +2810,15 @@  static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer)
 	if (err < 0)
 		return err;
 
+	/* Create the MSD control */
+	err = scarlett2_add_msd_ctl(mixer);
+	if (err < 0)
+		return err;
+
+	/* If MSD mode is enabled, don't create any other controls */
+	if (((struct scarlett2_data *)mixer->private_data)->msd_switch)
+		return 0;
+
 	/* Create the analogue output controls */
 	err = scarlett2_add_line_out_ctls(mixer);
 	if (err < 0)