@@ -243,7 +243,8 @@ static int snd_opl3_timer1_init(struct snd_opl3 * opl3, int timer_no)
tid.card = opl3->card->number;
tid.device = timer_no;
tid.subdevice = 0;
- if ((err = snd_timer_new(opl3->card, "AdLib timer #1", &tid, &timer)) >= 0) {
+ err = snd_timer_new(opl3->card, "AdLib timer #1", &tid, &timer);
+ if (err >= 0) {
strcpy(timer->name, "AdLib timer #1");
timer->private_data = opl3;
timer->hw = snd_opl3_timer1;
@@ -263,7 +264,8 @@ static int snd_opl3_timer2_init(struct snd_opl3 * opl3, int timer_no)
tid.card = opl3->card->number;
tid.device = timer_no;
tid.subdevice = 0;
- if ((err = snd_timer_new(opl3->card, "AdLib timer #2", &tid, &timer)) >= 0) {
+ err = snd_timer_new(opl3->card, "AdLib timer #2", &tid, &timer);
+ if (err >= 0) {
strcpy(timer->name, "AdLib timer #2");
timer->private_data = opl3;
timer->hw = snd_opl3_timer2;
@@ -348,7 +350,8 @@ int snd_opl3_new(struct snd_card *card,
spin_lock_init(&opl3->reg_lock);
spin_lock_init(&opl3->timer_lock);
- if ((err = snd_device_new(card, SNDRV_DEV_CODEC, opl3, &ops)) < 0) {
+ err = snd_device_new(card, SNDRV_DEV_CODEC, opl3, &ops);
+ if (err < 0) {
snd_opl3_free(opl3);
return err;
}
@@ -396,19 +399,23 @@ int snd_opl3_create(struct snd_card *card,
int err;
*ropl3 = NULL;
- if ((err = snd_opl3_new(card, hardware, &opl3)) < 0)
+ err = snd_opl3_new(card, hardware, &opl3);
+ if (err < 0)
return err;
if (! integrated) {
- if ((opl3->res_l_port = request_region(l_port, 2, "OPL2/3 (left)")) == NULL) {
+ opl3->res_l_port = request_region(l_port, 2, "OPL2/3 (left)");
+ if (!opl3->res_l_port) {
snd_printk(KERN_ERR "opl3: can't grab left port 0x%lx\n", l_port);
snd_device_free(card, opl3);
return -EBUSY;
}
- if (r_port != 0 &&
- (opl3->res_r_port = request_region(r_port, 2, "OPL2/3 (right)")) == NULL) {
- snd_printk(KERN_ERR "opl3: can't grab right port 0x%lx\n", r_port);
- snd_device_free(card, opl3);
- return -EBUSY;
+ if (r_port != 0) {
+ opl3->res_r_port = request_region(r_port, 2, "OPL2/3 (right)");
+ if (!opl3->res_r_port) {
+ snd_printk(KERN_ERR "opl3: can't grab right port 0x%lx\n", r_port);
+ snd_device_free(card, opl3);
+ return -EBUSY;
+ }
}
}
opl3->l_port = l_port;
@@ -423,7 +430,8 @@ int snd_opl3_create(struct snd_card *card,
break;
default:
opl3->command = &snd_opl2_command;
- if ((err = snd_opl3_detect(opl3)) < 0) {
+ err = snd_opl3_detect(opl3);
+ if (err < 0) {
snd_printd("OPL2/3 chip not detected at 0x%lx/0x%lx\n",
opl3->l_port, opl3->r_port);
snd_device_free(card, opl3);
@@ -449,11 +457,14 @@ int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev)
{
int err;
- if (timer1_dev >= 0)
- if ((err = snd_opl3_timer1_init(opl3, timer1_dev)) < 0)
+ if (timer1_dev >= 0) {
+ err = snd_opl3_timer1_init(opl3, timer1_dev);
+ if (err < 0)
return err;
+ }
if (timer2_dev >= 0) {
- if ((err = snd_opl3_timer2_init(opl3, timer2_dev)) < 0) {
+ err = snd_opl3_timer2_init(opl3, timer2_dev);
+ if (err < 0) {
snd_device_free(opl3->card, opl3->timer1);
opl3->timer1 = NULL;
return err;
@@ -477,7 +488,8 @@ int snd_opl3_hwdep_new(struct snd_opl3 * opl3,
/* create hardware dependent device (direct FM) */
- if ((err = snd_hwdep_new(card, "OPL2/OPL3", device, &hw)) < 0) {
+ err = snd_hwdep_new(card, "OPL2/OPL3", device, &hw);
+ if (err < 0) {
snd_device_free(card, opl3);
return err;
}
@@ -136,7 +136,8 @@ static int snd_opl3_open_seq_oss(struct snd_seq_oss_arg *arg, void *closure)
if (snd_BUG_ON(!arg))
return -ENXIO;
- if ((err = snd_opl3_synth_setup(opl3)) < 0)
+ err = snd_opl3_synth_setup(opl3);
+ if (err < 0)
return err;
/* fill the argument data */
@@ -144,7 +145,8 @@ static int snd_opl3_open_seq_oss(struct snd_seq_oss_arg *arg, void *closure)
arg->addr.client = opl3->oss_chset->client;
arg->addr.port = opl3->oss_chset->port;
- if ((err = snd_opl3_synth_use_inc(opl3)) < 0)
+ err = snd_opl3_synth_use_inc(opl3);
+ if (err < 0)
return err;
opl3->synth_mode = SNDRV_OPL3_MODE_SYNTH;
@@ -92,7 +92,8 @@ static int snd_opl3_synth_use(void *private_data, struct snd_seq_port_subscribe
struct snd_opl3 *opl3 = private_data;
int err;
- if ((err = snd_opl3_synth_setup(opl3)) < 0)
+ err = snd_opl3_synth_setup(opl3);
+ if (err < 0)
return err;
if (use_internal_drums) {
@@ -107,7 +108,8 @@ static int snd_opl3_synth_use(void *private_data, struct snd_seq_port_subscribe
}
if (info->sender.client != SNDRV_SEQ_CLIENT_SYSTEM) {
- if ((err = snd_opl3_synth_use_inc(opl3)) < 0)
+ err = snd_opl3_synth_use_inc(opl3);
+ if (err < 0)
return err;
}
opl3->synth_mode = SNDRV_OPL3_MODE_SEQ;
@@ -227,7 +229,8 @@ static int snd_opl3_seq_probe(struct device *_dev)
if (client < 0)
return client;
- if ((err = snd_opl3_synth_create_port(opl3)) < 0) {
+ err = snd_opl3_synth_create_port(opl3);
+ if (err < 0) {
snd_seq_delete_kernel_client(client);
opl3->seq_client = -1;
return err;
OPL3 helper code contains a few assignments in if condition, which is a bad coding style that may confuse readers and occasionally lead to bugs. This patch is merely for coding-style fixes, no functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de> --- sound/drivers/opl3/opl3_lib.c | 42 ++++++++++++++++++++++------------- sound/drivers/opl3/opl3_oss.c | 6 +++-- sound/drivers/opl3/opl3_seq.c | 9 +++++--- 3 files changed, 37 insertions(+), 20 deletions(-)