diff mbox series

[16/41] ARM: omap1: innovator: move ohci phy power handling to board file

Message ID 20220419133723.1394715-17-arnd@kernel.org
State New
Headers show
Series OMAP1 full multiplatform conversion | expand

Commit Message

Arnd Bergmann April 19, 2022, 1:36 p.m. UTC
From: Arnd Bergmann <arnd@arndb.de>

The innovator board needs a special case for its phy control.

Move the corresponding code into the board file and out of the
common code by adding another callback.

Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-omap1/board-innovator.c   | 19 +++++++++++++++
 drivers/usb/host/ohci-omap.c            | 31 ++++---------------------
 include/linux/platform_data/usb-omap1.h |  2 ++
 3 files changed, 26 insertions(+), 26 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index e7d6735d4701..f169e172421d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -290,6 +290,23 @@  static void __init innovator_init_smc91x(void)
 }
 
 #ifdef CONFIG_ARCH_OMAP15XX
+/*
+ * Board specific gang-switched transceiver power on/off.
+ */
+static int innovator_omap_ohci_transceiver_power(int on)
+{
+	if (on)
+		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
+				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+			       INNOVATOR_FPGA_CAM_USB_CONTROL);
+	else
+		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
+				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+			       INNOVATOR_FPGA_CAM_USB_CONTROL);
+
+	return 0;
+}
+
 static struct omap_usb_config innovator1510_usb_config __initdata = {
 	/* for bundled non-standard host and peripheral cables */
 	.hmc_mode	= 4,
@@ -300,6 +317,8 @@  static struct omap_usb_config innovator1510_usb_config __initdata = {
 
 	.register_dev	= 1,
 	.pins[0]	= 2,
+
+	.transceiver_power = innovator_omap_ohci_transceiver_power,
 };
 
 static const struct omap_lcd_config innovator1510_lcd_config __initconst = {
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 750a90c41a0a..069791d25abb 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -67,31 +67,6 @@  static void omap_ohci_clock_power(struct ohci_omap_priv *priv, int on)
 	}
 }
 
-/*
- * Board specific gang-switched transceiver power on/off.
- * NOTE:  OSK supplies power from DC, not battery.
- */
-static int omap_ohci_transceiver_power(struct ohci_omap_priv *priv, int on)
-{
-	if (on) {
-		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-		else if (priv->power)
-			gpiod_set_value_cansleep(priv->power, 0);
-	} else {
-		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-		else if (priv->power)
-			gpiod_set_value_cansleep(priv->power, 1);
-	}
-
-	return 0;
-}
-
 #ifdef	CONFIG_USB_OTG
 
 static void start_hnp(struct ohci_hcd *ohci)
@@ -202,7 +177,11 @@  static int ohci_omap_reset(struct usb_hcd *hcd)
 	}
 
 	/* FIXME hub_wq hub requests should manage power switching */
-	omap_ohci_transceiver_power(priv, 1);
+	if (config->transceiver_power)
+		return config->transceiver_power(1);
+
+	if (priv->power)
+		gpiod_set_value_cansleep(priv->power, 0);
 
 	/* board init will have already handled HMC and mux setup.
 	 * any external transceiver should already be initialized
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
index 878e572a78bf..e7b8dc92a269 100644
--- a/include/linux/platform_data/usb-omap1.h
+++ b/include/linux/platform_data/usb-omap1.h
@@ -50,6 +50,8 @@  struct omap_usb_config {
 	int (*ocpi_enable)(void);
 
 	void (*lb_reset)(void);
+
+	int (*transceiver_power)(int on);
 };
 
 #endif /* __LINUX_USB_OMAP1_H */