@@ -1668,6 +1668,7 @@ struct snd_emu1010 {
unsigned char input_source[NUM_INPUT_DESTS];
unsigned int adc_pads; /* bit mask */
unsigned int dac_pads; /* bit mask */
+ unsigned int wclock; /* Cached register value */
unsigned int clock_source;
unsigned int clock_fallback;
unsigned int optical_in; /* 0:SPDIF, 1:ADAT */
@@ -1824,6 +1825,7 @@ void snd_emu1010_fpga_write(struct snd_emu10k1 *emu, u32 reg, u32 value);
void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value);
void snd_emu1010_fpga_link_dst_src_write(struct snd_emu10k1 *emu, u32 dst, u32 src);
u32 snd_emu1010_fpga_link_dst_src_read(struct snd_emu10k1 *emu, u32 dst);
+void snd_emu1010_update_clock(struct snd_emu10k1 *emu);
unsigned int snd_emu10k1_efx_read(struct snd_emu10k1 *emu, unsigned int pc);
void snd_emu10k1_intr_enable(struct snd_emu10k1 *emu, unsigned int intrenb);
void snd_emu10k1_intr_disable(struct snd_emu10k1 *emu, unsigned int intrenb);
@@ -905,10 +905,10 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
/* Default WCLK set to 48kHz. */
snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, EMU_HANA_DEFCLOCK_48K);
/* Word Clock source, Internal 48kHz x1 */
+ emu->emu1010.wclock = EMU_HANA_WCLOCK_INT_48K;
snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K);
/* snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_4X); */
- /* Audio Dock LEDs. */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, EMU_HANA_DOCK_LEDS_2_LOCK | EMU_HANA_DOCK_LEDS_2_48K);
+ snd_emu1010_update_clock(emu);
// The routes are all set to EMU_SRC_SILENCE due to the reset,
// so it is safe to simply enable the outputs.
@@ -887,15 +887,79 @@ static const struct snd_emu1010_pads_info emu1010_pads_info[] = {
},
};
+static const char * const emu1010_clock_texts[] = {
+ "44100", "48000", "SPDIF", "ADAT", "Dock", "BNC"
+};
+
+static const u8 emu1010_clock_vals[] = {
+ EMU_HANA_WCLOCK_INT_44_1K,
+ EMU_HANA_WCLOCK_INT_48K,
+ EMU_HANA_WCLOCK_HANA_SPDIF_IN,
+ EMU_HANA_WCLOCK_HANA_ADAT_IN,
+ EMU_HANA_WCLOCK_2ND_HANA,
+ EMU_HANA_WCLOCK_SYNC_BNC,
+};
+
+static const char * const emu0404_clock_texts[] = {
+ "44100", "48000", "SPDIF", "BNC"
+};
+
+static const u8 emu0404_clock_vals[] = {
+ EMU_HANA_WCLOCK_INT_44_1K,
+ EMU_HANA_WCLOCK_INT_48K,
+ EMU_HANA_WCLOCK_HANA_SPDIF_IN,
+ EMU_HANA_WCLOCK_SYNC_BNC,
+};
+
+struct snd_emu1010_clock_info {
+ const char * const *texts;
+ const u8 *vals;
+ unsigned num;
+};
+
+static const struct snd_emu1010_clock_info emu1010_clock_info[] = {
+ {
+ // rev1 1010
+ .texts = emu1010_clock_texts,
+ .vals = emu1010_clock_vals,
+ .num = ARRAY_SIZE(emu1010_clock_vals),
+ },
+ {
+ // rev2 1010
+ .texts = emu1010_clock_texts,
+ .vals = emu1010_clock_vals,
+ .num = ARRAY_SIZE(emu1010_clock_vals) - 1,
+ },
+ {
+ // 1616(m) CardBus
+ .texts = emu1010_clock_texts,
+ // TODO: determine what is actually available.
+ // Pedantically, *every* source comes from the 2nd FPGA, as the
+ // card itself has no own (digital) audio ports. The user manual
+ // claims that ADAT and S/PDIF clock sources are separate, which
+ // can mean two things: either E-MU mapped the dock's sources to
+ // the primary ones, or they determine the meaning of the "Dock"
+ // source depending on how the ports are actually configured
+ // (which the 2nd FPGA must be doing anyway).
+ .vals = emu1010_clock_vals,
+ .num = ARRAY_SIZE(emu1010_clock_vals),
+ },
+ {
+ // 0404
+ .texts = emu0404_clock_texts,
+ .vals = emu0404_clock_vals,
+ .num = ARRAY_SIZE(emu0404_clock_vals),
+ },
+};
static int snd_emu1010_clock_source_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
- static const char * const texts[4] = {
- "44100", "48000", "SPDIF", "ADAT"
- };
+ struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
+ const struct snd_emu1010_clock_info *emu_ci =
+ &emu1010_clock_info[emu1010_idx(emu)];
- return snd_ctl_enum_info(uinfo, 1, 4, texts);
+ return snd_ctl_enum_info(uinfo, 1, emu_ci->num, emu_ci->texts);
}
static int snd_emu1010_clock_source_get(struct snd_kcontrol *kcontrol,
@@ -911,84 +975,27 @@ static int snd_emu1010_clock_source_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
+ const struct snd_emu1010_clock_info *emu_ci =
+ &emu1010_clock_info[emu1010_idx(emu)];
unsigned int val;
int change = 0;
val = ucontrol->value.enumerated.item[0] ;
- /* Limit: uinfo->value.enumerated.items = 4; */
- if (val >= 4)
+ if (val >= emu_ci->num)
return -EINVAL;
change = (emu->emu1010.clock_source != val);
if (change) {
emu->emu1010.clock_source = val;
- switch (val) {
- case 0:
- /* 44100 */
- /* Mute all */
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_MUTE );
- /* Word Clock source, Internal 44.1kHz x1 */
- snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK,
- EMU_HANA_WCLOCK_INT_44_1K | EMU_HANA_WCLOCK_1X );
- /* Set LEDs on Audio Dock */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2,
- EMU_HANA_DOCK_LEDS_2_44K | EMU_HANA_DOCK_LEDS_2_LOCK );
- /* Allow DLL to settle */
- msleep(10);
- /* Unmute all */
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE );
- break;
- case 1:
- /* 48000 */
- /* Mute all */
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_MUTE );
- /* Word Clock source, Internal 48kHz x1 */
- snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK,
- EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_1X );
- /* Set LEDs on Audio Dock */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2,
- EMU_HANA_DOCK_LEDS_2_48K | EMU_HANA_DOCK_LEDS_2_LOCK );
- /* Allow DLL to settle */
- msleep(10);
- /* Unmute all */
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE );
- break;
-
- case 2: /* Take clock from S/PDIF IN */
- /* Mute all */
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_MUTE );
- /* Word Clock source, sync to S/PDIF input */
- snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK,
- EMU_HANA_WCLOCK_HANA_SPDIF_IN | EMU_HANA_WCLOCK_1X );
- /* Set LEDs on Audio Dock */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2,
- EMU_HANA_DOCK_LEDS_2_EXT | EMU_HANA_DOCK_LEDS_2_LOCK );
- /* FIXME: We should set EMU_HANA_DOCK_LEDS_2_LOCK only when clock signal is present and valid */
- /* Allow DLL to settle */
- msleep(10);
- /* Unmute all */
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE );
- break;
-
- case 3:
- /* Take clock from ADAT IN */
- /* Mute all */
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_MUTE );
- /* Word Clock source, sync to ADAT input */
- snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK,
- EMU_HANA_WCLOCK_HANA_ADAT_IN | EMU_HANA_WCLOCK_1X );
- /* Set LEDs on Audio Dock */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, EMU_HANA_DOCK_LEDS_2_EXT | EMU_HANA_DOCK_LEDS_2_LOCK );
- /* FIXME: We should set EMU_HANA_DOCK_LEDS_2_LOCK only when clock signal is present and valid */
- /* Allow DLL to settle */
- msleep(10);
- /* Unmute all */
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE );
-
-
- break;
- }
+ emu->emu1010.wclock = emu_ci->vals[val];
+
+ snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_MUTE);
+ snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, emu->emu1010.wclock);
+ msleep(10); // Allow DLL to settle
+ snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE);
+
+ snd_emu1010_update_clock(emu);
}
- return change;
+ return change;
}
static const struct snd_kcontrol_new snd_emu1010_clock_source =
@@ -357,6 +357,29 @@ u32 snd_emu1010_fpga_link_dst_src_read(struct snd_emu10k1 *emu, u32 dst)
return (hi << 8) | lo;
}
+void snd_emu1010_update_clock(struct snd_emu10k1 *emu)
+{
+ u32 leds;
+
+ switch (emu->emu1010.wclock) {
+ case EMU_HANA_WCLOCK_INT_44_1K | EMU_HANA_WCLOCK_1X:
+ leds = EMU_HANA_DOCK_LEDS_2_44K;
+ break;
+ case EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_1X:
+ leds = EMU_HANA_DOCK_LEDS_2_48K;
+ break;
+ default:
+ leds = EMU_HANA_DOCK_LEDS_2_EXT;
+ break;
+ }
+
+ // FIXME: this should probably represent the AND of all currently
+ // used sources' lock status. But we don't know how to get that ...
+ leds |= EMU_HANA_DOCK_LEDS_2_LOCK;
+
+ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, leds);
+}
+
void snd_emu10k1_intr_enable(struct snd_emu10k1 *emu, unsigned int intrenb)
{
unsigned long flags;
The actually available clock sources depend on the available audio input ports and dedicated clock input ports. This includes refactoring the code to be data-driven to remain manageable. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> --- include/sound/emu10k1.h | 2 + sound/pci/emu10k1/emu10k1_main.c | 4 +- sound/pci/emu10k1/emumixer.c | 153 ++++++++++++++++--------------- sound/pci/emu10k1/io.c | 23 +++++ 4 files changed, 107 insertions(+), 75 deletions(-)