diff mbox series

[2/5] ASoC: ti: Convert RX51 to use exclusively GPIO descriptors

Message ID 20230926-descriptors-asoc-ti-v1-2-60cf4f8adbc5@linaro.org
State Accepted
Commit 5b12dd84499a74be9d133e020e424025359a244f
Headers show
Series GPIO descriptors for TI ASoC codecs | expand

Commit Message

Linus Walleij Sept. 26, 2023, 1:25 p.m. UTC
The RX51/Nokia n900 uses the legacy GPIO header to convert a GPIO
back to the global GPIO numberspace and then the jack using it
in the snd_soc_jack_add_gpios() call immediately looks up the
corresponding descriptor again.

The snd_soc_jack_add_gpios() handles GPIOs passed with devices
just fine: pass in the device instead, and rename the GPIO
to match the property in the device tree, and it should work
all the same but without all the trouble.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 sound/soc/ti/rx51.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

Comments

Jarkko Nikula Oct. 1, 2023, 5:48 p.m. UTC | #1
On 9/26/23 16:25, Linus Walleij wrote:
> The RX51/Nokia n900 uses the legacy GPIO header to convert a GPIO
> back to the global GPIO numberspace and then the jack using it
> in the snd_soc_jack_add_gpios() call immediately looks up the
> corresponding descriptor again.
> 
> The snd_soc_jack_add_gpios() handles GPIOs passed with devices
> just fine: pass in the device instead, and rename the GPIO
> to match the property in the device tree, and it should work
> all the same but without all the trouble.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---

Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
diff mbox series

Patch

diff --git a/sound/soc/ti/rx51.c b/sound/soc/ti/rx51.c
index 322c398d209b..047f852c79a9 100644
--- a/sound/soc/ti/rx51.c
+++ b/sound/soc/ti/rx51.c
@@ -10,7 +10,6 @@ 
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/gpio/consumer.h>
 #include <linux/module.h>
@@ -33,7 +32,6 @@  enum {
 
 struct rx51_audio_pdata {
 	struct gpio_desc *tvout_selection_gpio;
-	struct gpio_desc *jack_detection_gpio;
 	struct gpio_desc *eci_sw_gpio;
 	struct gpio_desc *speaker_amp_gpio;
 };
@@ -198,7 +196,7 @@  static struct snd_soc_jack rx51_av_jack;
 
 static struct snd_soc_jack_gpio rx51_av_jack_gpios[] = {
 	{
-		.name = "avdet-gpio",
+		.name = "jack-detection",
 		.report = SND_JACK_HEADSET,
 		.invert = 1,
 		.debounce_time = 200,
@@ -263,7 +261,6 @@  static const struct snd_kcontrol_new aic34_rx51_controls[] = {
 static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_card *card = rtd->card;
-	struct rx51_audio_pdata *pdata = snd_soc_card_get_drvdata(card);
 	int err;
 
 	snd_soc_limit_volume(card, "TPA6130A2 Headphone Playback Volume", 42);
@@ -283,9 +280,9 @@  static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
 		return err;
 	}
 
-	/* prepare gpio for snd_soc_jack_add_gpios */
-	rx51_av_jack_gpios[0].gpio = desc_to_gpio(pdata->jack_detection_gpio);
-	devm_gpiod_put(card->dev, pdata->jack_detection_gpio);
+	rx51_av_jack_gpios[0].gpiod_dev = card->dev;
+	/* Name is assigned in the struct */
+	rx51_av_jack_gpios[0].idx = 0;
 
 	err = snd_soc_jack_add_gpios(&rx51_av_jack,
 				     ARRAY_SIZE(rx51_av_jack_gpios),
@@ -425,14 +422,6 @@  static int rx51_soc_probe(struct platform_device *pdev)
 		return PTR_ERR(pdata->tvout_selection_gpio);
 	}
 
-	pdata->jack_detection_gpio = devm_gpiod_get(card->dev,
-						    "jack-detection",
-						    GPIOD_ASIS);
-	if (IS_ERR(pdata->jack_detection_gpio)) {
-		dev_err(card->dev, "could not get jack detection gpio\n");
-		return PTR_ERR(pdata->jack_detection_gpio);
-	}
-
 	pdata->eci_sw_gpio = devm_gpiod_get(card->dev, "eci-switch",
 					    GPIOD_OUT_HIGH);
 	if (IS_ERR(pdata->eci_sw_gpio)) {