@@ -138,9 +138,10 @@ static int sdw_slave_reg_show(struct seq_file *s_file, void *data)
}
DEFINE_SHOW_ATTRIBUTE(sdw_slave_reg);
-#define MAX_CMD_BYTES 256
+#define MAX_CMD_BYTES (1024 * 1024)
static int cmd;
+static int cmd_type;
static u32 start_addr;
static size_t num_bytes;
static u8 read_buffer[MAX_CMD_BYTES];
@@ -164,6 +165,25 @@ static int set_command(void *data, u64 value)
DEFINE_DEBUGFS_ATTRIBUTE(set_command_fops, NULL,
set_command, "%llu\n");
+static int set_command_type(void *data, u64 value)
+{
+ struct sdw_slave *slave = data;
+
+ if (value > 1)
+ return -EINVAL;
+
+ /* Userspace changed the hardware state behind the kernel's back */
+ add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+
+ dev_dbg(&slave->dev, "command type: %s\n", value ? "BRA" : "Column0");
+
+ cmd_type = value;
+
+ return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(set_command_type_fops, NULL,
+ set_command_type, "%llu\n");
+
static int set_start_address(void *data, u64 value)
{
struct sdw_slave *slave = data;
@@ -199,9 +219,64 @@ static int set_num_bytes(void *data, u64 value)
DEFINE_DEBUGFS_ATTRIBUTE(set_num_bytes_fops, NULL,
set_num_bytes, "%llu\n");
+static int do_bpt_sequence(struct sdw_slave *slave, bool write,
+ u8 *buffer)
+{
+ struct sdw_bpt_msg msg = {0};
+ int ret1;
+ int ret;
+
+ msg.addr = start_addr;
+ msg.len = num_bytes;
+ msg.dev_num = slave->dev_num;
+ if (write)
+ msg.flags = SDW_MSG_FLAG_WRITE;
+ else
+ msg.flags = SDW_MSG_FLAG_READ;
+ msg.buf = buffer;
+
+ ret = sdw_bpt_open_stream(slave->bus, slave, SDW_BRA, &msg);
+ if (ret < 0) {
+ dev_err(&slave->dev, "bpt_open_stream failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = sdw_bpt_send_async(slave->bus,
+ slave,
+ &msg);
+ if (ret < 0) {
+ dev_err(&slave->dev, "bpt_send_async failed: %d\n", ret);
+ goto close;
+ }
+
+ dev_dbg(&slave->dev, "send_async done\n");
+
+ ret = sdw_bpt_wait(slave->bus,
+ slave,
+ &msg);
+ if (ret < 0)
+ dev_err(&slave->dev, "%s: bpt_wait failed: %d\n", __func__, ret);
+
+ dev_dbg(&slave->dev, "wait done\n");
+
+close:
+ ret1 = sdw_bpt_close_stream(slave->bus, slave, SDW_BRA, &msg);
+ if (ret1 < 0) {
+ dev_err(&slave->dev, "%s: bpt_close_stream failed: %d\n",
+ __func__, ret1);
+ if (!ret)
+ ret = ret1;
+ }
+
+ return ret;
+}
+
static int cmd_go(void *data, u64 value)
{
+ const struct firmware *fw = NULL;
struct sdw_slave *slave = data;
+ ktime_t start_t;
+ ktime_t finish_t;
int ret;
if (value != 1)
@@ -218,40 +293,54 @@ static int cmd_go(void *data, u64 value)
return ret;
}
- /* Userspace changed the hardware state behind the kernel's back */
- add_taint(TAINT_USER, LOCKDEP_STILL_OK);
-
- dev_dbg(&slave->dev, "starting command\n");
-
if (cmd == 0) {
- const struct firmware *fw;
-
ret = request_firmware(&fw, firmware_file, &slave->dev);
if (ret < 0) {
dev_err(&slave->dev, "firmware %s not found\n", firmware_file);
goto out;
}
-
- if (fw->size != num_bytes) {
+ if (fw->size < num_bytes) {
dev_err(&slave->dev,
- "firmware %s: unexpected size %zd, desired %zd\n",
+ "firmware %s: firmware size %zd, desired %zd\n",
firmware_file, fw->size, num_bytes);
- release_firmware(fw);
goto out;
}
+ }
- ret = sdw_nwrite_no_pm(slave, start_addr, num_bytes, fw->data);
- release_firmware(fw);
+ /* Userspace changed the hardware state behind the kernel's back */
+ add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+
+ dev_dbg(&slave->dev, "starting command\n");
+ start_t = ktime_get();
+
+ if (cmd == 0) {
+ if (cmd_type) {
+ ret = do_bpt_sequence(slave, true, (u8 *)fw->data);
+ } else {
+ ret = sdw_nwrite_no_pm(slave, start_addr, num_bytes, fw->data);
+ }
} else {
- ret = sdw_nread_no_pm(slave, start_addr, num_bytes, read_buffer);
+ memset(read_buffer, 0, sizeof(read_buffer));
+
+ if (cmd_type) {
+ ret = do_bpt_sequence(slave, false, read_buffer);
+ } else {
+ ret = sdw_nread_no_pm(slave, start_addr, num_bytes, read_buffer);
+ }
}
- dev_dbg(&slave->dev, "command completed %d\n", ret);
+ finish_t = ktime_get();
out:
+ if (fw)
+ release_firmware(fw);
+
pm_runtime_mark_last_busy(&slave->dev);
pm_runtime_put(&slave->dev);
+ dev_dbg(&slave->dev, "command completed, status %d, time %lld ms\n",
+ ret, div_u64(finish_t - start_t, NSEC_PER_MSEC));
+
return ret;
}
DEFINE_DEBUGFS_ATTRIBUTE(cmd_go_fops, NULL,
@@ -293,6 +382,7 @@ void sdw_slave_debugfs_init(struct sdw_slave *slave)
/* interface to send arbitrary commands */
debugfs_create_file("command", 0200, d, slave, &set_command_fops);
+ debugfs_create_file("command_type", 0200, d, slave, &set_command_type_fops);
debugfs_create_file("start_address", 0200, d, slave, &set_start_address_fops);
debugfs_create_file("num_bytes", 0200, d, slave, &set_num_bytes_fops);
debugfs_create_file("go", 0200, d, slave, &cmd_go_fops);
Add code to show what codec drivers will need to do to enable BPT/BRA transfers. The only difference is to set the 'command_type' file to 1. A zero-value will rely on regular read/write commands in Column0. For now the code will only return error codes since the Manager side is not enabled yet. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> --- drivers/soundwire/debugfs.c | 122 +++++++++++++++++++++++++++++++----- 1 file changed, 106 insertions(+), 16 deletions(-)