diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f7c5662213e4..9bbea531660d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-sony-xperia-yodo-pdx234.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
new file mode 100644
index 000000000000..85e0d3d66e16
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/cs35l45.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+/* TODO: Only one SID of PMR735D seems accessible? */
+
+/delete-node/ &hwfence_shbuf;
+/delete-node/ &mpss_mem;
+/delete-node/ &rmtfs_mem;
+/ {
+	model = "Sony Xperia 1 V";
+	compatible = "sony,pdx234", "qcom,sm8550";
+	chassis-type = "handset";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c4 = &i2c4;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c16 = &i2c_hub_2;
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+		pinctrl-names = "default";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		mpss_mem: mpss-region@89800000 {
+			reg = <0x0 0x89800000 0x0 0x10800000>;
+			no-map;
+		};
+
+		splash@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+			reg = <0x0 0xe6440000 0x0 0x2dd000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f8b00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8b00000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		ramoops@ffd00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffd00000 0x0 0xc0000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			pmsg-size = <0x40000>;
+			ecc-size = <16>;
+		};
+
+		rdtag-store-region@ffdc0000 {
+			reg = <0x0 0xffdc0000 0x0 0x40000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		pm8550_bob1: bob1 {
+			regulator-name = "pm8550_bob1";
+			regulator-min-microvolt = <3416000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */
+
+		pm8550_l1: ldo1 {
+			regulator-name = "pm8550_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l2: ldo2 {
+			regulator-name = "pm8550_l2";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 exists in cmd-db, but the board seems to crash on access */
+
+		pm8550_l5: ldo5 {
+			regulator-name = "pm8550_l5";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l6: ldo6 {
+			regulator-name = "pm8550_l6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l7: ldo7 {
+			regulator-name = "pm8550_l7";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l8: ldo8 {
+			regulator-name = "pm8550_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l9: ldo9 {
+			regulator-name = "pm8550_l9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l10: ldo10 {
+			regulator-name = "pm8550_l10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l11: ldo11 {
+			regulator-name = "pm8550_l11";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l12: ldo12 {
+			regulator-name = "pm8550_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l13: ldo13 {
+			regulator-name = "pm8550_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l14: ldo14 {
+			regulator-name = "pm8550_l14";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l15: ldo15 {
+			regulator-name = "pm8550_l15";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l16: ldo16 {
+			regulator-name = "pm8550_l16";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l17: ldo17 {
+			regulator-name = "pm8550_l17";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		pm8550vs_0_l1: ldo1 {
+			regulator-name = "pm8550vs_0_l1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_0_l3: ldo3 {
+			regulator-name = "pm8550vs_0_l3";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		pm8550vs_1_l1: ldo1 {
+			regulator-name = "pm8550vs_1_l1";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 exists in cmd-db, but the board seems to crash on access */
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		pm8550vs_2_s4: smps4 {
+			regulator-name = "pm8550vs_2_s4";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_s5: smps5 {
+			regulator-name = "pm8550vs_2_s5";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_l1: ldo1 {
+			regulator-name = "pm8550vs_2_l1";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_l2: ldo2 {
+			regulator-name = "pm8550vs_2_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_l3: ldo3 {
+			regulator-name = "pm8550vs_2_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		pm8550ve_s4: smps4 {
+			regulator-name = "pm8550ve_s4";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550ve_l1: ldo1 {
+			regulator-name = "pm8550ve_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550ve_l2: ldo2 {
+			regulator-name = "pm8550ve_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550ve_l3: ldo3 {
+			regulator-name = "pm8550ve_l3";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		pm8550vs_3_s1: smps1 {
+			regulator-name = "pm8550vs_3_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s2: smps2 {
+			regulator-name = "pm8550vs_3_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s3: smps3 {
+			regulator-name = "pm8550vs_3_s3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s4: smps4 {
+			regulator-name = "pm8550vs_3_s4";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s5: smps5 {
+			regulator-name = "pm8550vs_3_s5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s6: smps6 {
+			regulator-name = "pm8550vs_3_s6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_l1: ldo1 {
+			regulator-name = "pm8550vs_3_l1";
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_l2: ldo2 {
+			regulator-name = "pm8550vs_3_l2";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_l3: ldo3 {
+			regulator-name = "pm8550vs_3_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&cam_pwr_a_cs>;
+		pinctrl-names = "default";
+
+		regulators {
+			slg51000_a_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* NXP NFC @ 28 */
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* LX Semi SW82907 touchscreen @ 28 */
+};
+
+&i2c10 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&i2c11 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	cs35l41_l: speaker-amp@30 {
+		compatible = "cirrus,cs35l45";
+		reg = <0x30>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+		#sound-dai-cells = <1>;
+
+		cirrus,gpio-ctrl2 {
+			gpio-ctrl = <0x2>;
+		};
+	};
+
+	cs35l41_r: speaker-amp@31 {
+		compatible = "cirrus,cs35l45";
+		reg = <0x31>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+		#sound-dai-cells = <1>;
+
+		cirrus,gpio-ctrl2 {
+			gpio-ctrl = <0x2>;
+		};
+	};
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&pm8550vs_2_l1>;
+	vdda-pll-supply = <&pm8550vs_2_l3>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	vol_down_n: volume-down-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio12";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-down;
+		output-disable;
+		input-enable;
+	};
+};
+
+&pm8550b_gpios {
+	snapshot_n: snapshot-n-state {
+		pins = "gpio7";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8550vs_g_gpios {
+	cam_pwr_a_cs: cam-pwr-a-cs-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <0x01>;
+		drive-push-pull;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
+	qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
+	qcom,tune-usb2-preem = /bits/ 8 <0x7>;
+	vdd18-supply = <&pm8550_l15>;
+	vdd3-supply = <&pm8550_l5>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn",
+			"qcom/sm8550/Sony/yodo/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn",
+			"qcom/sm8550/Sony/yodo/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&pm8550_l9>;
+	vqmmc-supply = <&pm8550_l8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&pm8550vs_2_l1>;
+	vdda12-supply = <&pm8550vs_2_l3>;
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&pm8550vs_2_l3>;
+	vdda-pll-supply = <&pm8550ve_l3>;
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
