diff mbox series

[v3,1/3] app/testpmd: clock gettime call in throughput calculation

Message ID 20200706233231.25881-1-honnappa.nagarahalli@arm.com
State New
Headers show
Series [v3,1/3] app/testpmd: clock gettime call in throughput calculation | expand

Commit Message

Honnappa Nagarahalli July 6, 2020, 11:32 p.m. UTC
The throughput calculation requires a counter that measures
passing of time. However, the kernel saves and restores the PMU
state when a thread is unscheduled and scheduled. This ensures
that the PMU cycles are not counted towards a thread that is
not scheduled. Hence, when RTE_ARM_EAL_RDTSC_USE_PMU is enabled,
the PMU cycles do not represent the passing of time.
This results in incorrect calculation of throughput numbers.
Use clock_gettime system call to calculate the time passed since
last call.

Bugzilla ID: 450
Fixes: 0e106980301d ("app/testpmd: show throughput in port stats")
Cc: zhihong.wang@intel.com
Cc: stable@dpdk.org

Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>

Reviewed-by: Phil Yang <phil.yang@arm.com>

Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

Tested-by: Phil Yang <phil.yang@arm.com>

Tested-by: Ali Alnubani <alialnu@mellanox.com>

---
v3:
1) Dropped 'noisy vnf' patch, will add with future Dharmik's patch
2) Dropped flow gen patch, send out a separate one if there is
   consensus on the mailing list
3) Changed the logic to display burst stats to make it easier
   to understand (Ferruh)

v2: Updated commit log in 1/5 (Jerin)

 app/test-pmd/config.c | 44 +++++++++++++++++++++++++++++--------------
 1 file changed, 30 insertions(+), 14 deletions(-)

-- 
2.17.1

Comments

Ferruh Yigit July 7, 2020, 5:47 p.m. UTC | #1
On 7/7/2020 12:32 AM, Honnappa Nagarahalli wrote:
> The throughput calculation requires a counter that measures

> passing of time. However, the kernel saves and restores the PMU

> state when a thread is unscheduled and scheduled. This ensures

> that the PMU cycles are not counted towards a thread that is

> not scheduled. Hence, when RTE_ARM_EAL_RDTSC_USE_PMU is enabled,

> the PMU cycles do not represent the passing of time.

> This results in incorrect calculation of throughput numbers.

> Use clock_gettime system call to calculate the time passed since

> last call.

> 

> Bugzilla ID: 450

> Fixes: 0e106980301d ("app/testpmd: show throughput in port stats")

> Cc: zhihong.wang@intel.com

> Cc: stable@dpdk.org

> 

> Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>

> Reviewed-by: Phil Yang <phil.yang@arm.com>

> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

> Tested-by: Phil Yang <phil.yang@arm.com>

> Tested-by: Ali Alnubani <alialnu@mellanox.com>


Series applied to dpdk-next-net/master, thanks.
diff mbox series

Patch

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 016bcb09c..91fbf99f8 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -54,6 +54,14 @@ 
 
 #define ETHDEV_FWVERS_LEN 32
 
+#ifdef CLOCK_MONOTONIC_RAW /* Defined in glibc bits/time.h */
+#define CLOCK_TYPE_ID CLOCK_MONOTONIC_RAW
+#else
+#define CLOCK_TYPE_ID CLOCK_MONOTONIC
+#endif
+
+#define NS_PER_SEC 1E9
+
 static char *flowtype_to_str(uint16_t flow_type);
 
 static const struct {
@@ -136,9 +144,10 @@  nic_stats_display(portid_t port_id)
 	static uint64_t prev_pkts_tx[RTE_MAX_ETHPORTS];
 	static uint64_t prev_bytes_rx[RTE_MAX_ETHPORTS];
 	static uint64_t prev_bytes_tx[RTE_MAX_ETHPORTS];
-	static uint64_t prev_cycles[RTE_MAX_ETHPORTS];
+	static uint64_t prev_ns[RTE_MAX_ETHPORTS];
+	struct timespec cur_time;
 	uint64_t diff_pkts_rx, diff_pkts_tx, diff_bytes_rx, diff_bytes_tx,
-								diff_cycles;
+								diff_ns;
 	uint64_t mpps_rx, mpps_tx, mbps_rx, mbps_tx;
 	struct rte_eth_stats stats;
 	struct rte_port *port = &ports[port_id];
@@ -195,10 +204,17 @@  nic_stats_display(portid_t port_id)
 		}
 	}
 
-	diff_cycles = prev_cycles[port_id];
-	prev_cycles[port_id] = rte_rdtsc();
-	if (diff_cycles > 0)
-		diff_cycles = prev_cycles[port_id] - diff_cycles;
+	diff_ns = 0;
+	if (clock_gettime(CLOCK_TYPE_ID, &cur_time) == 0) {
+		uint64_t ns;
+
+		ns = cur_time.tv_sec * NS_PER_SEC;
+		ns += cur_time.tv_nsec;
+
+		if (prev_ns[port_id] != 0)
+			diff_ns = ns - prev_ns[port_id];
+		prev_ns[port_id] = ns;
+	}
 
 	diff_pkts_rx = (stats.ipackets > prev_pkts_rx[port_id]) ?
 		(stats.ipackets - prev_pkts_rx[port_id]) : 0;
@@ -206,10 +222,10 @@  nic_stats_display(portid_t port_id)
 		(stats.opackets - prev_pkts_tx[port_id]) : 0;
 	prev_pkts_rx[port_id] = stats.ipackets;
 	prev_pkts_tx[port_id] = stats.opackets;
-	mpps_rx = diff_cycles > 0 ?
-		diff_pkts_rx * rte_get_tsc_hz() / diff_cycles : 0;
-	mpps_tx = diff_cycles > 0 ?
-		diff_pkts_tx * rte_get_tsc_hz() / diff_cycles : 0;
+	mpps_rx = diff_ns > 0 ?
+		(double)diff_pkts_rx / diff_ns * NS_PER_SEC : 0;
+	mpps_tx = diff_ns > 0 ?
+		(double)diff_pkts_tx / diff_ns * NS_PER_SEC : 0;
 
 	diff_bytes_rx = (stats.ibytes > prev_bytes_rx[port_id]) ?
 		(stats.ibytes - prev_bytes_rx[port_id]) : 0;
@@ -217,10 +233,10 @@  nic_stats_display(portid_t port_id)
 		(stats.obytes - prev_bytes_tx[port_id]) : 0;
 	prev_bytes_rx[port_id] = stats.ibytes;
 	prev_bytes_tx[port_id] = stats.obytes;
-	mbps_rx = diff_cycles > 0 ?
-		diff_bytes_rx * rte_get_tsc_hz() / diff_cycles : 0;
-	mbps_tx = diff_cycles > 0 ?
-		diff_bytes_tx * rte_get_tsc_hz() / diff_cycles : 0;
+	mbps_rx = diff_ns > 0 ?
+		(double)diff_bytes_rx / diff_ns * NS_PER_SEC : 0;
+	mbps_tx = diff_ns > 0 ?
+		(double)diff_bytes_tx / diff_ns * NS_PER_SEC : 0;
 
 	printf("\n  Throughput (since last show)\n");
 	printf("  Rx-pps: %12"PRIu64"          Rx-bps: %12"PRIu64"\n  Tx-pps: %12"