@@ -1,5 +1,5 @@
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2017 NXP
+# Copyright 2017-2020 NXP
#
include $(RTE_SDK)/mk/rte.vars.mk
@@ -15,6 +15,7 @@ CFLAGS += -O3 $(WERROR_FLAGS)
CFLAGS += -Wno-pointer-arith
CFLAGS += -I$(RTE_SDK_DPAA)/
CFLAGS += -I$(RTE_SDK_DPAA)/include
+CFLAGS += -I$(RTE_SDK_DPAA)/fmlib
CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa
CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include/
CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/base/qbman
@@ -26,6 +27,7 @@ CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
EXPORT_MAP := rte_pmd_dpaa_version.map
# Interfaces with DPDK
+SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += fmlib/fm_lib.c
SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_ethdev.c
SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_rxtx.c
new file mode 100644
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __DPAA_INTEGRATION_H
+#define __DPAA_INTEGRATION_H
+
+#include "ncsw_ext.h"
+
+#define DPAA_VERSION 11
+
+#define BM_MAX_NUM_OF_POOLS 64 /**< Number of buffers pools */
+
+#define INTG_MAX_NUM_OF_FM 2
+
+/* Ports defines */
+#define FM_MAX_NUM_OF_1G_MACS 6
+#define FM_MAX_NUM_OF_10G_MACS 2
+#define FM_MAX_NUM_OF_MACS (FM_MAX_NUM_OF_1G_MACS + FM_MAX_NUM_OF_10G_MACS)
+#define FM_MAX_NUM_OF_OH_PORTS 6
+
+#define FM_MAX_NUM_OF_1G_RX_PORTS FM_MAX_NUM_OF_1G_MACS
+#define FM_MAX_NUM_OF_10G_RX_PORTS FM_MAX_NUM_OF_10G_MACS
+#define FM_MAX_NUM_OF_RX_PORTS \
+ (FM_MAX_NUM_OF_10G_RX_PORTS + FM_MAX_NUM_OF_1G_RX_PORTS)
+
+#define FM_MAX_NUM_OF_1G_TX_PORTS FM_MAX_NUM_OF_1G_MACS
+#define FM_MAX_NUM_OF_10G_TX_PORTS FM_MAX_NUM_OF_10G_MACS
+#define FM_MAX_NUM_OF_TX_PORTS \
+ (FM_MAX_NUM_OF_10G_TX_PORTS + FM_MAX_NUM_OF_1G_TX_PORTS)
+
+#define FM_PORT_MAX_NUM_OF_EXT_POOLS 4
+ /**< Number of external BM pools per Rx port */
+#define FM_NUM_CONG_GRPS 256
+ /**< Total number of congestion groups in QM */
+#define FM_MAX_NUM_OF_SUB_PORTALS 16
+#define FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS 0
+
+/* PCD defines */
+#define FM_PCD_PLCR_NUM_ENTRIES 256
+ /**< Total number of policer profiles */
+#define FM_PCD_KG_NUM_OF_SCHEMES 32
+ /**< Total number of KG schemes */
+#define FM_PCD_MAX_NUM_OF_CLS_PLANS 256
+ /**< Number of classification plan entries. */
+
+#define FM_MAX_PFC_PRIO 8
+
+#endif /* __DPAA_INTEGRATION_H */
new file mode 100644
@@ -0,0 +1,1058 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __FM_EXT_H
+#define __FM_EXT_H
+
+#include "ncsw_ext.h"
+#include "dpaa_integration.h"
+
+#define FM_IOC_TYPE_BASE (NCSW_IOC_TYPE_BASE + 1)
+#define FMT_IOC_TYPE_BASE (NCSW_IOC_TYPE_BASE + 3)
+
+#define MODULE_FM 0x00010000
+#define __ERR_MODULE__ MODULE_FM
+
+/* #define FM_LIB_DBG */
+
+#if defined(FM_LIB_DBG)
+ #define _fml_dbg(format, arg...) \
+ printf("fmlib [%s:%u] - " format, \
+ __func__, __LINE__, ##arg)
+#else
+ #define _fml_dbg(arg...)
+#endif
+
+/*#define FM_IOCTL_DBG*/
+
+#if defined(FM_IOCTL_DBG)
+ #define _fm_ioctl_dbg(format, arg...) \
+ printf("fm ioctl [%s:%u] - " format, \
+ __func__, __LINE__, ##arg)
+#else
+ #define _fm_ioctl_dbg(arg...)
+#endif
+
+/*
+ * @Group lnx_ioctl_ncsw_grp NetCommSw Linux User-Space (IOCTL) API
+ * @{
+ */
+
+#define NCSW_IOC_TYPE_BASE 0xe0
+ /**< defines the IOCTL type for all the NCSW Linux module commands */
+
+/*
+ * @Group lnx_usr_FM_grp Frame Manager API
+ *
+ * @Description FM API functions, definitions and enums.
+ *
+ * @{
+ */
+
+/*
+ * @Group lnx_usr_FM_lib_grp FM library
+ *
+ * @Description FM API functions, definitions and enums
+ *
+ * The FM module is the main driver module and is a mandatory
+ * module for FM driver users. This module must be initialized
+ * first prior to any other drivers modules.
+ * The FM is a "singleton" module. It is responsible of the
+ * common HW modules: FPM, DMA, common QMI and common BMI
+ * initializations and run-time control routines. This module
+ * must be initialized always when working with any of the FM
+ * modules.
+ * NOTE - We assume that the FM library will be initialized only
+ * by core No. 0!
+ *
+ * @{
+ */
+
+/*
+ * @Description Enum for defining port types
+ */
+typedef enum e_fm_port_type {
+ e_FM_PORT_TYPE_OH_OFFLINE_PARSING = 0, /**< Offline parsing port */
+ e_FM_PORT_TYPE_RX, /**< 1G Rx port */
+ e_FM_PORT_TYPE_RX_10G, /**< 10G Rx port */
+ e_FM_PORT_TYPE_TX, /**< 1G Tx port */
+ e_FM_PORT_TYPE_TX_10G, /**< 10G Tx port */
+ e_FM_PORT_TYPE_RX_2_5G, /**< 2.5G Rx port */
+ e_FM_PORT_TYPE_TX_2_5G, /**< 2.5G Tx port */
+ e_FM_PORT_TYPE_DUMMY
+} e_fm_port_type;
+
+/*
+ * @Description Parse results memory layout
+ */
+typedef struct t_fm_prs_result {
+ volatile uint8_t lpid; /**< Logical port id */
+ volatile uint8_t shimr; /**< Shim header result */
+ volatile uint16_t l2r; /**< Layer 2 result */
+ volatile uint16_t l3r; /**< Layer 3 result */
+ volatile uint8_t l4r; /**< Layer 4 result */
+ volatile uint8_t cplan; /**< Classification plan id */
+ volatile uint16_t nxthdr; /**< Next Header */
+ volatile uint16_t cksum; /**< Running-sum */
+ volatile uint16_t flags_frag_off;
+ /**<Flags & fragment-offset field of the last IP-header
+ */
+ volatile uint8_t route_type;
+ /**< Routing type field of a IPv6 routing extension
+ * header
+ */
+ volatile uint8_t rhp_ip_valid;
+ /**< Routing Extension Header Present; last bit is IP
+ * valid
+ */
+ volatile uint8_t shim_off[2]; /**< Shim offset */
+ volatile uint8_t ip_pid_off;
+ /**< IP PID (last IP-proto)offset */
+ volatile uint8_t eth_off; /**< ETH offset */
+ volatile uint8_t llc_snap_off; /**< LLC_SNAP offset */
+ volatile uint8_t vlan_off[2]; /**< VLAN offset */
+ volatile uint8_t etype_off; /**< ETYPE offset */
+ volatile uint8_t pppoe_off; /**< PPP offset */
+ volatile uint8_t mpls_off[2]; /**< MPLS offset */
+ volatile uint8_t ip_off[2]; /**< IP offset */
+ volatile uint8_t gre_off; /**< GRE offset */
+ volatile uint8_t l4_off; /**< Layer 4 offset */
+ volatile uint8_t nxthdr_off; /**< Parser end point */
+} __rte_packed t_fm_prs_result;
+
+/*
+ * @Collection FM Parser results
+ */
+#define FM_PR_L2_VLAN_STACK 0x00000100 /**< Parse Result: VLAN stack */
+#define FM_PR_L2_ETHERNET 0x00008000 /**< Parse Result: Ethernet*/
+#define FM_PR_L2_VLAN 0x00004000 /**< Parse Result: VLAN */
+#define FM_PR_L2_LLC_SNAP 0x00002000 /**< Parse Result: LLC_SNAP */
+#define FM_PR_L2_MPLS 0x00001000 /**< Parse Result: MPLS */
+#define FM_PR_L2_PPPoE 0x00000800 /**< Parse Result: PPPoE */
+/* @} */
+
+/*
+ * @Collection FM Frame descriptor macros
+ */
+#define FM_FD_CMD_FCO 0x80000000 /**< Frame queue Context Override */
+#define FM_FD_CMD_RPD 0x40000000 /**< Read Prepended Data */
+#define FM_FD_CMD_UPD 0x20000000 /**< Update Prepended Data */
+#define FM_FD_CMD_DTC 0x10000000 /**< Do L4 Checksum */
+#define FM_FD_CMD_DCL4C 0x10000000 /**< Didn't calculate L4 Checksum */
+#define FM_FD_CMD_CFQ 0x00ffffff /**< Confirmation Frame Queue */
+
+#define FM_FD_ERR_UNSUPPORTED_FORMAT 0x04000000
+ /**< Not for Rx-Port! Unsupported Format
+ */
+#define FM_FD_ERR_LENGTH 0x02000000
+ /**< Not for Rx-Port! Length Error */
+#define FM_FD_ERR_DMA 0x01000000 /**< DMA Data error */
+
+#define FM_FD_IPR 0x00000001 /**< IPR frame (not error) */
+
+#define FM_FD_ERR_IPR_NCSP (0x00100000 | FM_FD_IPR)
+ /**< IPR non-consistent-sp */
+#define FM_FD_ERR_IPR (0x00200000 | FM_FD_IPR) /**< IPR error */
+#define FM_FD_ERR_IPR_TO (0x00300000 | FM_FD_IPR) /**< IPR timeout */
+
+#ifdef FM_CAPWAP_SUPPORT
+#define FM_FD_ERR_CRE 0x00200000
+#define FM_FD_ERR_CHE 0x00100000
+#endif /* FM_CAPWAP_SUPPORT */
+
+#define FM_FD_ERR_PHYSICAL 0x00080000
+ /**< Rx FIFO overflow, FCS error, code error, running
+ * disparity error (SGMII and TBI modes), FIFO parity
+ * error. PHY Sequence error, PHY error control
+ * character detected.
+ */
+#define FM_FD_ERR_SIZE 0x00040000
+ /**< Frame too long OR Frame size exceeds max_length_frame */
+#define FM_FD_ERR_CLS_DISCARD 0x00020000 /**< classification discard */
+#define FM_FD_ERR_EXTRACTION 0x00008000 /**< Extract Out of Frame */
+#define FM_FD_ERR_NO_SCHEME 0x00004000 /**< No Scheme Selected */
+#define FM_FD_ERR_KEYSIZE_OVERFLOW 0x00002000 /**< Keysize Overflow */
+#define FM_FD_ERR_COLOR_RED 0x00000800 /**< Frame color is red */
+#define FM_FD_ERR_COLOR_YELLOW 0x00000400 /**< Frame color is yellow */
+#define FM_FD_ERR_ILL_PLCR 0x00000200
+ /**< Illegal Policer Profile selected */
+#define FM_FD_ERR_PLCR_FRAME_LEN 0x00000100 /**< Policer frame length error */
+#define FM_FD_ERR_PRS_TIMEOUT 0x00000080 /**< Parser Time out Exceed */
+#define FM_FD_ERR_PRS_ILL_INSTRUCT 0x00000040
+ /**< Invalid Soft Parser instruction */
+#define FM_FD_ERR_PRS_HDR_ERR 0x00000020
+ /**< Header error was identified during parsing */
+#define FM_FD_ERR_BLOCK_LIMIT_EXCEEDED 0x00000008
+ /**< Frame parsed beyind 256 first bytes */
+
+#define FM_FD_TX_STATUS_ERR_MASK (FM_FD_ERR_UNSUPPORTED_FORMAT | \
+ FM_FD_ERR_LENGTH | \
+ FM_FD_ERR_DMA) /**< TX Error FD bits */
+
+#define FM_FD_RX_STATUS_ERR_MASK (FM_FD_ERR_UNSUPPORTED_FORMAT | \
+ FM_FD_ERR_LENGTH | \
+ FM_FD_ERR_DMA | \
+ FM_FD_ERR_IPR | \
+ FM_FD_ERR_IPR_TO | \
+ FM_FD_ERR_IPR_NCSP | \
+ FM_FD_ERR_PHYSICAL | \
+ FM_FD_ERR_SIZE | \
+ FM_FD_ERR_CLS_DISCARD | \
+ FM_FD_ERR_COLOR_RED | \
+ FM_FD_ERR_COLOR_YELLOW | \
+ FM_FD_ERR_ILL_PLCR | \
+ FM_FD_ERR_PLCR_FRAME_LEN | \
+ FM_FD_ERR_EXTRACTION | \
+ FM_FD_ERR_NO_SCHEME | \
+ FM_FD_ERR_KEYSIZE_OVERFLOW | \
+ FM_FD_ERR_PRS_TIMEOUT | \
+ FM_FD_ERR_PRS_ILL_INSTRUCT | \
+ FM_FD_ERR_PRS_HDR_ERR | \
+ FM_FD_ERR_BLOCK_LIMIT_EXCEEDED)
+ /**< RX Error FD bits */
+
+#define FM_FD_RX_STATUS_ERR_NON_FM 0x00400000
+ /**< non Frame-Manager error */
+/* @} */
+
+/*
+ * @Description FM Exceptions
+ */
+typedef enum e_fm_exceptions {
+ e_FM_EX_DMA_BUS_ERROR = 0, /**< DMA bus error. */
+ e_FM_EX_DMA_READ_ECC,
+ /**< Read Buffer ECC error (Valid for FM rev < 6)*/
+ e_FM_EX_DMA_SYSTEM_WRITE_ECC,
+ /**< Write Buffer ECC error on system side
+ * (Valid for FM rev < 6)
+ */
+ e_FM_EX_DMA_FM_WRITE_ECC,
+ /**< Write Buffer ECC error on FM side (Valid for FM rev < 6)*/
+ e_FM_EX_DMA_SINGLE_PORT_ECC,
+ /**< Single Port ECC error on FM side (Valid for FM rev > 6)*/
+ e_FM_EX_FPM_STALL_ON_TASKS, /**< Stall of tasks on FPM */
+ e_FM_EX_FPM_SINGLE_ECC, /**< Single ECC on FPM. */
+ e_FM_EX_FPM_DOUBLE_ECC,
+ /**< Double ECC error on FPM ram access */
+ e_FM_EX_QMI_SINGLE_ECC, /**< Single ECC on QMI. */
+ e_FM_EX_QMI_DOUBLE_ECC, /**< Double bit ECC occurred on QMI */
+ e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,/**< Dequeue from unknown port id */
+ e_FM_EX_BMI_LIST_RAM_ECC, /**< Linked List RAM ECC error */
+ e_FM_EX_BMI_STORAGE_PROFILE_ECC,/**< Storage Profile ECC Error */
+ e_FM_EX_BMI_STATISTICS_RAM_ECC,
+ /**< Statistics Count RAM ECC Error Enable */
+ e_FM_EX_BMI_DISPATCH_RAM_ECC, /**< Dispatch RAM ECC Error Enable */
+ e_FM_EX_IRAM_ECC, /**< Double bit ECC occurred on IRAM*/
+ e_FM_EX_MURAM_ECC /**< Double bit ECC occurred on MURAM*/
+} e_fm_exceptions;
+
+/*
+ * @Description Enum for defining port DMA swap mode
+ */
+typedef enum e_fm_dma_swap_option {
+ e_FM_DMA_NO_SWP, /**< No swap, transfer data as is.*/
+ e_FM_DMA_SWP_PPC_LE,
+ /**< The transferred data should be swapped in PowerPc Little
+ * Endian mode.
+ */
+ e_FM_DMA_SWP_BE
+ /**< The transferred data should be swapped in Big Endian mode
+ */
+} e_fm_dma_swap_option;
+
+/*
+ * @Description Enum for defining port DMA cache attributes
+ */
+typedef enum e_fm_dma_cache_option {
+ e_FM_DMA_NO_STASH = 0, /**< Cacheable, no Allocate (No Stashing) */
+ e_FM_DMA_STASH = 1 /**< Cacheable and Allocate (Stashing on) */
+} e_fm_dma_cache_option;
+/*
+ * @Group lnx_usr_FM_init_grp FM Initialization Unit
+ *
+ * @Description FM Initialization Unit
+ *
+ * Initialization Flow
+ * Initialization of the FM Module will be carried out by the
+ * application according to the following sequence:
+ * - Calling the configuration routine with basic parameters.
+ * - Calling the advance initialization routines to change
+ * driver's defaults.
+ * - Calling the initialization routine.
+ *
+ * @{
+ */
+
+t_handle fm_open(uint8_t id);
+void fm_close(t_handle h_fm);
+
+/*
+ * @Description A structure for defining buffer prefix area content.
+ */
+typedef struct t_fm_buffer_prefix_content {
+ uint16_t priv_data_size;
+ /**< Number of bytes to be left at the beginning of the external
+ * buffer Note that the private-area will start from the base of
+ * the buffer address.
+ */
+ bool pass_prs_result;
+ /**< TRUE to pass the parse result to/from the FM; User may use
+ * fm_port_get_buffer_prs_result() in order to get the
+ * parser-result from a buffer.
+ */
+ bool pass_time_stamp;
+ /**< TRUE to pass the timeStamp to/from the FM User may use
+ * fm_port_get_buffer_time_stamp() in order to get the
+ * parser-result from a buffer.
+ */
+ bool pass_hash_result;
+ /**< TRUE to pass the KG hash result to/from the FM User may use
+ * fm_port_get_buffer_hash_result() in order to get the
+ * parser-result from a buffer.
+ */
+ bool pass_all_other_pcdinfo;
+ /**< Add all other Internal-Context information: AD,
+ * hash-result, key, etc.
+ */
+ uint16_t data_align;
+ /**< 0 to use driver's default alignment [64], other value for
+ * selecting a data alignment (must be a power of 2); if write
+ * optimization is used, must be >= 16.
+ */
+ uint8_t manipExtraSpace;
+ /**< Maximum extra size needed (insertion-size minus
+ * removal-size);
+ * Note that this field impacts the size of the buffer-prefix
+ * (i.e. it pushes the data offset);
+ * This field is irrelevant if DPAA_VERSION==10
+ */
+} t_fm_buffer_prefix_content;
+
+/*
+ * @Description A structure of information about each of the external
+ * buffer pools used by a port or storage-profile.
+ */
+typedef struct t_fm_ext_pool_params {
+ uint8_t id; /**< External buffer pool id */
+ uint16_t size; /**< External buffer pool buffer size */
+} t_fm_ext_pool_params;
+
+/*
+ * @Description A structure for informing the driver about the external
+ * buffer pools allocated in the BM and used by a port or a
+ * storage-profile.
+ */
+typedef struct t_fm_ext_pools {
+ uint8_t num_of_pools_used;
+ /**< Number of pools use by this port*/
+ t_fm_ext_pool_params ext_buf_pool[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+ /**< Parameters for each port */
+} t_fm_ext_pools;
+
+/*
+ * @Description A structure for defining backup BM Pools.
+ */
+typedef struct t_fm_backup_bm_pools {
+ uint8_t numOfBackupPools;
+ /**< Number of BM backup pools - must be smaller than
+ * the total number of pools defined for the specified
+ * port.
+ */
+ uint8_t pool_ids[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+ /**< numOfBackupPools pool id's, specifying which pools
+ * should be used only as backup. Pool id's specified
+ * here must be a subset of the pools used by the
+ * specified port.
+ */
+} t_fm_backup_bm_pools;
+
+/*
+ * @Description A structure for defining BM pool depletion criteria
+ */
+typedef struct t_fm_buf_pool_depletion {
+ bool poolsGrpModeEnable;
+ /**< select mode in which pause frames will be sent after a
+ * number of pools (all together!) are depleted
+ */
+ uint8_t numOfPools;
+ /**< the number of depleted pools that will invoke pause frames
+ * transmission.
+ */
+ bool poolsToConsider[BM_MAX_NUM_OF_POOLS];
+ /**< For each pool, TRUE if it should be considered for
+ * depletion (Note - this pool must be used by this port!).
+ */
+ bool singlePoolModeEnable;
+ /**< select mode in which pause frames will be sent after a
+ * single-pool is depleted;
+ */
+ bool poolsToConsiderForSingleMode[BM_MAX_NUM_OF_POOLS];
+ /**< For each pool, TRUE if it should be considered for
+ * depletion (Note - this pool must be used by this port!)
+ */
+#if (DPAA_VERSION >= 11)
+ bool pfcPrioritiesEn[FM_MAX_PFC_PRIO];
+ /**< This field is used by the MAC as the Priority Enable Vector
+ * in the PFC frame which is transmitted
+ */
+#endif /* (DPAA_VERSION >= 11) */
+} t_fm_buf_pool_depletion;
+
+/** @} */ /* end of lnx_usr_FM_init_grp group */
+
+/*
+ * @Group lnx_usr_FM_runtime_control_grp FM Runtime Control Unit
+ *
+ * @Description FM Runtime control unit API functions, definitions and enums.
+ *
+ * The FM driver provides a set of control routines.
+ * These routines may only be called after the module was fully
+ * initialized (both configuration and initialization routines
+ * were called). They are typically used to get information from
+ * hardware (status, counters/statistics, revision etc.), to
+ * modify a current state or to force/enable a required action.
+ * Run-time control may be called whenever necessary and as many
+ * times as needed.
+ * @{
+ */
+
+/*
+ * @Collection General FM defines.
+ */
+#define FM_MAX_NUM_OF_VALID_PORTS (FM_MAX_NUM_OF_OH_PORTS + \
+ FM_MAX_NUM_OF_1G_RX_PORTS + \
+ FM_MAX_NUM_OF_10G_RX_PORTS + \
+ FM_MAX_NUM_OF_1G_TX_PORTS + \
+ FM_MAX_NUM_OF_10G_TX_PORTS)
+ /**< Number of available FM ports */
+/* @} */
+
+/*
+ * @Description A structure for Port bandwidth requirement. Port is identified
+ * by type and relative id.
+ */
+typedef struct t_fm_port_bandwidth {
+ e_fm_port_type type; /**< FM port type */
+ uint8_t relativePortId; /**< Type relative port id */
+ uint8_t bandwidth;
+ /**< bandwidth - (in term of percents) */
+} t_fm_port_bandwidth;
+
+/*
+ * @Description A Structure containing an array of Port bandwidth
+ * requirements. The user should state the ports requiring
+ * bandwidth in terms of percentage - i.e. all port's bandwidths
+ * in the array must add up to 100.
+ */
+typedef struct t_fm_ports_bandwidth_params {
+ uint8_t numOfPorts;
+ /**< The number of relevant ports, which is the
+ * number of valid entries in the array below
+ */
+ t_fm_port_bandwidth ports_bandwidths[FM_MAX_NUM_OF_VALID_PORTS];
+ /**< for each port, it's bandwidth (all port's bw must add up to
+ * 100.
+ */
+} t_fm_ports_bandwidth_params;
+
+/*
+ * @Description Enum for defining FM counters
+ */
+typedef enum e_fm_counters {
+ e_FM_COUNTERS_ENQ_TOTAL_FRAME = 0,
+ /**< QMI total enqueued frames counter */
+ e_FM_COUNTERS_DEQ_TOTAL_FRAME,
+ /**< QMI total dequeued frames counter */
+ e_FM_COUNTERS_DEQ_0, /**< QMI 0 frames from QMan counter */
+ e_FM_COUNTERS_DEQ_1, /**< QMI 1 frames from QMan counter */
+ e_FM_COUNTERS_DEQ_2, /**< QMI 2 frames from QMan counter */
+ e_FM_COUNTERS_DEQ_3, /**< QMI 3 frames from QMan counter */
+ e_FM_COUNTERS_DEQ_FROM_DEFAULT,
+ /**< QMI dq from default queue counter */
+ e_FM_COUNTERS_DEQ_FROM_CONTEXT, /**< QMI dq from FQ context counter */
+ e_FM_COUNTERS_DEQ_FROM_FD,
+ /**< QMI dq from FD command field counter */
+ e_FM_COUNTERS_DEQ_CONFIRM /**< QMI dq confirm counter */
+} e_fm_counters;
+
+/*
+ * @Description A structure for returning FM revision information
+ */
+typedef struct t_fm_revision_info {
+ uint8_t majorRev; /**< Major revision */
+ uint8_t minorRev; /**< Minor revision */
+} t_fm_revision_info;
+
+/*
+ * @Description A structure for returning FM ctrl code revision information
+ */
+typedef struct t_fm_ctrl_code_revision_info {
+ uint16_t packageRev; /**< Package revision */
+ uint8_t majorRev; /**< Major revision */
+ uint8_t minorRev; /**< Minor revision */
+} t_fm_ctrl_code_revision_info;
+
+/*
+ * @Description A Structure for obtaining FM controller monitor values
+ */
+typedef struct t_fm_ctrl_mon {
+ uint8_t percentCnt[2]; /**< Percentage value */
+} t_fm_ctrl_mon;
+
+/*
+ * @Function FM_SetPortsBandwidth
+ *
+ * @Description Sets relative weights between ports when accessing common
+ * resources.
+ *
+ * @Param[in] h_fm A handle to an FM Module.
+ * @Param[in] p_ports_bandwidth A structure of ports bandwidths in
+ * percentage, i.e. total must equal 100.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+uint32_t FM_SetPortsBandwidth(t_handle h_fm,
+ t_fm_ports_bandwidth_params *p_ports_bandwidth);
+
+/*
+ * @Function FM_GetRevision
+ *
+ * @Description Returns the FM revision
+ *
+ * @Param[in] h_fm A handle to an FM Module.
+ * @Param[out] p_fm_revision_info A structure of revision information
+ * parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+uint32_t FM_GetRevision(t_handle h_fm,
+ t_fm_revision_info *p_fm_revision_info);
+
+/*
+ * @Function FM_GetFmanCtrlCodeRevision
+ *
+ * @Description Returns the Fman controller code revision
+ * (Not implemented in fm-lib just yet!)
+ *
+ * @Param[in] h_fm A handle to an FM Module.
+ * @Param[out] p_revision_info A structure of revision information parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+uint32_t FM_GetFmanCtrlCodeRevision(t_handle h_fm,
+ t_fm_ctrl_code_revision_info *p_revision_info);
+
+/*
+ * @Function FM_GetCounter
+ *
+ * @Description Reads one of the FM counters.
+ *
+ * @Param[in] h_fm A handle to an FM Module.
+ * @Param[in] counter The requested counter.
+ *
+ * @Return Counter's current value.
+ *
+ * @Cautions Allowed only following FM_Init().
+ * Note that it is user's responsibility to call this routine only
+ * for enabled counters, and there will be no indication if a
+ * disabled counter is accessed.
+ */
+uint32_t FM_GetCounter(t_handle h_fm, e_fm_counters counter);
+
+/*
+ * @Function FM_ModifyCounter
+ *
+ * @Description Sets a value to an enabled counter. Use "0" to reset the
+ * counter.
+ *
+ * @Param[in] h_fm A handle to an FM Module.
+ * @Param[in] counter The requested counter.
+ * @Param[in] val The requested value to be written into the counter.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+uint32_t FM_ModifyCounter(t_handle h_fm,
+ e_fm_counters counter, uint32_t val);
+
+/*
+ * @Function FM_CtrlMonStart
+ *
+ * @Description Start monitoring utilization of all available FM controllers.
+ *
+ * In order to obtain FM controllers utilization the following
+ * sequence should be used:
+ * -# FM_CtrlMonStart()
+ * -# FM_CtrlMonStop()
+ * -# FM_CtrlMonGetCounters() - issued for each FM controller
+ *
+ * @Param[in] h_fm A handle to an FM Module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID).
+ */
+uint32_t FM_CtrlMonStart(t_handle h_fm);
+
+/*
+ * @Function FM_CtrlMonStop
+ *
+ * @Description Stop monitoring utilization of all available FM controllers.
+ *
+ * In order to obtain FM controllers utilization the following
+ * sequence should be used:
+ * -# FM_CtrlMonStart()
+ * -# FM_CtrlMonStop()
+ * -# FM_CtrlMonGetCounters() - issued for each FM controller
+ *
+ * @Param[in] h_fm A handle to an FM Module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID).
+ */
+uint32_t FM_CtrlMonStop(t_handle h_fm);
+
+/*
+ * @Function FM_CtrlMonGetCounters
+ *
+ * @Description Obtain FM controller utilization parameters.
+ *
+ * In order to obtain FM controllers utilization the following
+ * sequence should be used:
+ * -# FM_CtrlMonStart()
+ * -# FM_CtrlMonStop()
+ * -# FM_CtrlMonGetCounters() - issued for each FM controller
+ *
+ * @Param[in] h_fm A handle to an FM Module.
+ * @Param[in] fmCtrlIndex FM Controller index for that utilization results
+ * are requested.
+ * @Param[in] p_mon Pointer to utilization results structure.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID).
+ */
+uint32_t FM_CtrlMonGetCounters(t_handle h_fm,
+ uint8_t fmCtrlIndex, t_fm_ctrl_mon *p_mon);
+
+/*
+ * @Function FM_ForceIntr
+ *
+ * @Description Causes an interrupt event on the requested source.
+ *
+ * @Param[in] h_fm A handle to an FM Module.
+ * @Param[in] exception An exception to be forced.
+ *
+ * @Return E_OK on success; Error code if the exception is not enabled,
+ * or is not able to create interrupt.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+uint32_t FM_ForceIntr(t_handle h_fm, e_fm_exceptions exception);
+
+/** @} */ /* end of lnx_usr_FM_runtime_control_grp group */
+/** @} */ /* end of lnx_usr_FM_lib_grp group */
+/** @} */ /* end of lnx_usr_FM_grp group */
+
+/*
+ * @Description FM Char device ioctls
+ */
+
+/*
+ * @Group lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
+ *
+ * @Description FM Linux ioctls definitions and enums
+ *
+ * @{
+ */
+
+/*
+ * @Collection FM IOCTL device ('/dev') definitions
+ */
+#define DEV_FM_NAME "fm" /**< Name of the FM chardev */
+
+#define DEV_FM_MINOR_BASE 0
+#define DEV_FM_PCD_MINOR_BASE (DEV_FM_MINOR_BASE + 1)
+ /*/dev/fmx-pcd */
+#define DEV_FM_OH_PORTS_MINOR_BASE (DEV_FM_PCD_MINOR_BASE + 1)
+ /*/dev/fmx-port-ohy */
+#define DEV_FM_RX_PORTS_MINOR_BASE \
+ (DEV_FM_OH_PORTS_MINOR_BASE + FM_MAX_NUM_OF_OH_PORTS)
+ /*/dev/fmx-port-rxy */
+#define DEV_FM_TX_PORTS_MINOR_BASE \
+ (DEV_FM_RX_PORTS_MINOR_BASE + FM_MAX_NUM_OF_RX_PORTS)
+ /*/dev/fmx-port-txy */
+#define DEV_FM_MAX_MINORS \
+ (DEV_FM_TX_PORTS_MINOR_BASE + FM_MAX_NUM_OF_TX_PORTS)
+
+#define FM_IOC_NUM(n) (n)
+#define FM_PCD_IOC_NUM(n) ((n) + 20)
+#define FM_PORT_IOC_NUM(n) ((n) + 70)
+/* @} */
+
+#define IOC_FM_MAX_NUM_OF_PORTS 64
+
+/*
+ * @Description Enum for defining port types
+ * (must match enum e_fm_port_type defined in fm_ext.h)
+ */
+typedef enum ioc_fm_port_type {
+ e_IOC_FM_PORT_TYPE_OH_OFFLINE_PARSING = 0, /**< Offline parsing port */
+ e_IOC_FM_PORT_TYPE_RX, /**< 1G Rx port */
+ e_IOC_FM_PORT_TYPE_RX_10G, /**< 10G Rx port */
+ e_IOC_FM_PORT_TYPE_TX, /**< 1G Tx port */
+ e_IOC_FM_PORT_TYPE_TX_10G, /**< 10G Tx port */
+ e_IOC_FM_PORT_TYPE_DUMMY
+} ioc_fm_port_type;
+
+/*
+ * @Group lnx_ioctl_FM_lib_grp FM library
+ *
+ * @Description FM API functions, definitions and enums
+ * The FM module is the main driver module and is a mandatory
+ * module for FM driver users. Before any further module
+ * initialization, this module must be initialized.
+ * The FM is a "single-tone" module. It is responsible of the
+ * common HW modules: FPM, DMA, common QMI, common BMI
+ * initializations and run-time control routines. This module
+ * must be initialized always when working with any of the FM
+ * modules.
+ * NOTE - We assumes that the FML will be initialize only by
+ * core No. 0!
+ *
+ * @{
+ */
+
+/*
+ * @Description FM Exceptions
+ */
+typedef enum ioc_fm_exceptions {
+ e_IOC_FM_EX_DMA_BUS_ERROR, /**< DMA bus error. */
+ e_IOC_EX_DMA_READ_ECC,
+ /**< Read Buffer ECC error
+ * (Valid for FM rev < 6)
+ */
+ e_IOC_EX_DMA_SYSTEM_WRITE_ECC,
+ /**< Write Buffer ECC error on system side
+ * (Valid for FM rev < 6)
+ */
+ e_IOC_EX_DMA_FM_WRITE_ECC,
+ /**< Write Buffer ECC error on FM side
+ * (Valid for FM rev < 6)
+ */
+ e_IOC_EX_DMA_SINGLE_PORT_ECC,
+ /**< Single Port ECC error on FM side (Valid for FM rev > 6)*/
+ e_IOC_EX_FPM_STALL_ON_TASKS, /**< Stall of tasks on FPM */
+ e_IOC_EX_FPM_SINGLE_ECC, /**< Single ECC on FPM. */
+ e_IOC_EX_FPM_DOUBLE_ECC,
+ /**< Double ECC error on FPM ram access */
+ e_IOC_EX_QMI_SINGLE_ECC, /**< Single ECC on QMI. */
+ e_IOC_EX_QMI_DOUBLE_ECC, /**< Double bit ECC occurred on QMI */
+ e_IOC_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,
+ /**< Dequeue from unknown port id */
+ e_IOC_EX_BMI_LIST_RAM_ECC, /**< Linked List RAM ECC error */
+ e_IOC_EX_BMI_STORAGE_PROFILE_ECC,/**< Storage Profile ECC Error */
+ e_IOC_EX_BMI_STATISTICS_RAM_ECC,
+ /**< Statistics Count RAM ECC Error Enable */
+ e_IOC_EX_BMI_DISPATCH_RAM_ECC, /**< Dispatch RAM ECC Error Enable */
+ e_IOC_EX_IRAM_ECC, /**< Double bit ECC occurred on IRAM*/
+ e_IOC_EX_MURAM_ECC /**< Double bit ECC occurred on MURAM*/
+} ioc_fm_exceptions;
+
+/*
+ * @Group lnx_ioctl_FM_runtime_control_grp FM Runtime Control Unit
+ *
+ * @Description FM Runtime control unit API functions, definitions and enums.
+ * The FM driver provides a set of control routines for each
+ * module. These routines may only be called after the module was
+ * fully initialized (both configuration and initialization
+ * routines were called). They are typically used to get
+ * information from hardware (status, counters/statistics,
+ * revision etc.), to modify a current state or to force/enable a
+ * required action. Run-time control may be called whenever
+ * necessary and as many times as needed.
+ * @{
+ */
+
+/*
+ * @Collection General FM defines.
+ */
+#define IOC_FM_MAX_NUM_OF_VALID_PORTS (FM_MAX_NUM_OF_OH_PORTS + \
+ FM_MAX_NUM_OF_1G_RX_PORTS + \
+ FM_MAX_NUM_OF_10G_RX_PORTS + \
+ FM_MAX_NUM_OF_1G_TX_PORTS + \
+ FM_MAX_NUM_OF_10G_TX_PORTS)
+/* @} */
+
+/*
+ * @Description Structure for Port bandwidth requirement. Port is identified
+ * by type and relative id.
+ * (must be identical to t_fm_port_bandwidth defined in fm_ext.h)
+ */
+typedef struct ioc_fm_port_bandwidth_t {
+ ioc_fm_port_type type; /**< FM port type */
+ uint8_t relative_port_id; /**< Type relative port id */
+ uint8_t bandwidth;
+ /**< bandwidth - (in term of percents) */
+} ioc_fm_port_bandwidth_t;
+
+/*
+ * @Description A Structure containing an array of Port bandwidth
+ * requirements.
+ * The user should state the ports requiring bandwidth in terms
+ * of percentage - i.e. all port's bandwidths in the array must
+ * add up to 100.
+ * (must be identical to t_fm_ports_bandwidth_params defined in
+ * fm_ext.h)
+ */
+typedef struct ioc_fm_port_bandwidth_params {
+ uint8_t num_of_ports;
+ /**< num of ports listed in the array below */
+ ioc_fm_port_bandwidth_t ports_bandwidths[IOC_FM_MAX_NUM_OF_VALID_PORTS];
+ /**< for each port, it's bandwidth (all port's
+ * bandwidths must add up to 100.
+ */
+} ioc_fm_port_bandwidth_params;
+
+/*
+ * @Description enum for defining FM counters
+ */
+typedef enum ioc_fm_counters {
+ e_IOC_FM_COUNTERS_ENQ_TOTAL_FRAME,
+ /**< QMI total enqueued frames counter */
+ e_IOC_FM_COUNTERS_DEQ_TOTAL_FRAME,
+ /**< QMI total dequeued frames counter*/
+ e_IOC_FM_COUNTERS_DEQ_0, /**< QMI 0 frames from QMan counter */
+ e_IOC_FM_COUNTERS_DEQ_1, /**< QMI 1 frames from QMan counter */
+ e_IOC_FM_COUNTERS_DEQ_2, /**< QMI 2 frames from QMan counter */
+ e_IOC_FM_COUNTERS_DEQ_3, /**< QMI 3 frames from QMan counter */
+ e_IOC_FM_COUNTERS_DEQ_FROM_DEFAULT,
+ /**< QMI dequeue from default queue counter */
+ e_IOC_FM_COUNTERS_DEQ_FROM_CONTEXT,
+ /**< QMI dequeue from FQ context counter */
+ e_IOC_FM_COUNTERS_DEQ_FROM_FD,
+ /**< QMI dequeue from FD command field counter */
+ e_IOC_FM_COUNTERS_DEQ_CONFIRM, /**< QMI dequeue confirm counter */
+} ioc_fm_counters;
+
+typedef struct ioc_fm_obj_t {
+ void *obj;
+} ioc_fm_obj_t;
+
+/*
+ * @Description A structure for returning revision information
+ * (must match struct t_fm_revision_info declared in fm_ext.h)
+ */
+typedef struct ioc_fm_revision_info_t {
+ uint8_t major; /**< Major revision */
+ uint8_t minor; /**< Minor revision */
+} ioc_fm_revision_info_t;
+
+/*
+ * @Description A structure for FM counters
+ */
+typedef struct ioc_fm_counters_params_t {
+ ioc_fm_counters cnt;/**< The requested counter */
+ uint32_t val;
+ /**< The requested value to get/set from/into the
+ * counter
+ */
+} ioc_fm_counters_params_t;
+
+typedef union ioc_fm_api_version_t {
+ struct {
+ uint8_t major;
+ uint8_t minor;
+ uint8_t respin;
+ uint8_t reserved;
+ } version;
+ uint32_t ver;
+} ioc_fm_api_version_t;
+
+typedef struct fm_ctrl_mon_t {
+ uint8_t percent_cnt[2];
+} fm_ctrl_mon_t;
+
+typedef struct ioc_fm_ctrl_mon_counters_params_t {
+ uint8_t fm_ctrl_index;
+ fm_ctrl_mon_t *p_mon;
+} ioc_fm_ctrl_mon_counters_params_t;
+
+/*
+ * @Function FM_IOC_SET_PORTS_BANDWIDTH
+ *
+ * @Description Sets relative weights between ports when accessing common
+ * resources.
+ *
+ * @Param[in] ioc_fm_port_bandwidth_params Port bandwidth percentages,
+ * their sum must equal 100.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+#define FM_IOC_SET_PORTS_BANDWIDTH \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(2), ioc_fm_port_bandwidth_params)
+
+/*
+ * @Function FM_IOC_GET_REVISION
+ *
+ * @Description Returns the FM revision
+ *
+ * @Param[out] ioc_fm_revision_info_t A structure of revision
+ * information parameters.
+ *
+ * @Return None.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+#define FM_IOC_GET_REVISION \
+ _IOR(FM_IOC_TYPE_BASE, FM_IOC_NUM(3), ioc_fm_revision_info_t)
+
+/*
+ * @Function FM_IOC_GET_COUNTER
+ *
+ * @Description Reads one of the FM counters.
+ *
+ * @Param[in,out] ioc_fm_counters_params_t The requested counter parameters.
+ *
+ * @Return Counter's current value.
+ *
+ * @Cautions Allowed only following FM_Init().
+ * Note that it is user's responsibilty to call this routine only
+ * for enabled counters, and there will be no indication if a
+ * disabled counter is accessed.
+ */
+#define FM_IOC_GET_COUNTER \
+ _IOWR(FM_IOC_TYPE_BASE, FM_IOC_NUM(4), ioc_fm_counters_params_t)
+
+/*
+ * @Function FM_IOC_SET_COUNTER
+ *
+ * @Description Sets a value to an enabled counter. Use "0" to reset the
+ * counter.
+ *
+ * @Param[in] ioc_fm_counters_params_t The requested counter parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+#define FM_IOC_SET_COUNTER \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(5), ioc_fm_counters_params_t)
+
+/*
+ * @Function FM_IOC_FORCE_INTR
+ *
+ * @Description Causes an interrupt event on the requested source.
+ *
+ * @Param[in] ioc_fm_exceptions An exception to be forced.
+ *
+ * @Return E_OK on success; Error code if the exception is not enabled,
+ * or is not able to create interrupt.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+#define FM_IOC_FORCE_INTR \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(6), ioc_fm_exceptions)
+
+/*
+ * @Function FM_IOC_GET_API_VERSION
+ *
+ * @Description Reads the FMD IOCTL API version.
+ *
+ * @Param[in,out] ioc_fm_api_version_t The requested counter parameters
+ *
+ * @Return Version's value.
+ */
+#define FM_IOC_GET_API_VERSION \
+ _IOR(FM_IOC_TYPE_BASE, FM_IOC_NUM(7), ioc_fm_api_version_t)
+
+/*
+ * @Function FM_CtrlMonStart
+ *
+ * @Description Start monitoring utilization of all available FM controllers.
+ *
+ * In order to obtain FM controllers utilization the following
+ * sequence should be used:
+ * -# FM_CtrlMonStart()
+ * -# FM_CtrlMonStop()
+ * -# FM_CtrlMonGetCounters() - issued for each FM controller
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+#define FM_IOC_CTRL_MON_START \
+ _IO(FM_IOC_TYPE_BASE, FM_IOC_NUM(15))
+
+/*
+ * @Function FM_CtrlMonStop
+ *
+ * @Description Stop monitoring utilization of all available FM controllers.
+ *
+ * In order to obtain FM controllers utilization the following
+ * sequence should be used:
+ * -# FM_CtrlMonStart()
+ * -# FM_CtrlMonStop()
+ * -# FM_CtrlMonGetCounters() - issued for each FM controller
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+#define FM_IOC_CTRL_MON_STOP \
+ _IO(FM_IOC_TYPE_BASE, FM_IOC_NUM(16))
+
+/*
+ * @Function FM_CtrlMonGetCounters
+ *
+ * @Description Obtain FM controller utilization parameters.
+ *
+ * In order to obtain FM controllers utilization the following
+ * sequence should be used:
+ * -# FM_CtrlMonStart()
+ * -# FM_CtrlMonStop()
+ * -# FM_CtrlMonGetCounters() - issued for each FM controller
+ *
+ * @Param[in] ioc_fm_ctrl_mon_counters_params_t
+ * A structure holding the required parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_IOC_CTRL_MON_GET_COUNTERS_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), \
+ ioc_compat_fm_ctrl_mon_counters_params_t)
+#endif
+#define FM_IOC_CTRL_MON_GET_COUNTERS \
+ _IOW(FM_IOC_TYPE_BASE, FM_IOC_NUM(17), \
+ ioc_fm_ctrl_mon_counters_params_t)
+
+/** @} */ /* end of lnx_ioctl_FM_runtime_control_grp group */
+/** @} */ /* end of lnx_ioctl_FM_lib_grp group */
+/** @} */ /* end of lnx_ioctl_FM_grp */
+
+#define FMD_API_VERSION_MAJOR 21
+#define FMD_API_VERSION_MINOR 1
+#define FMD_API_VERSION_RESPIN 0
+
+#endif /* __FM_EXT_H */
new file mode 100644
@@ -0,0 +1,561 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <unistd.h>
+#include <termios.h>
+#include <sys/ioctl.h>
+#include <stdbool.h>
+#include <rte_common.h>
+
+#include "fm_ext.h"
+#include "fm_pcd_ext.h"
+#include "fm_port_ext.h"
+#include <dpaa_ethdev.h>
+
+#define DEV_TO_ID(p) \
+ do { \
+ t_device *p_dev = (t_device *)p; \
+ p = UINT_TO_PTR(p_dev->id); \
+ } while (0)
+
+/* Major and minor are in sync with FMD, respin is for fmlib identification */
+#define FM_LIB_VERSION_MAJOR 21
+#define FM_LIB_VERSION_MINOR 1
+#define FM_LIB_VERSION_RESPIN 0
+
+#if (FMD_API_VERSION_MAJOR != FM_LIB_VERSION_MAJOR) || \
+ (FMD_API_VERSION_MINOR != FM_LIB_VERSION_MINOR)
+#warning FMD and FMLIB version mismatch
+#endif
+
+uint32_t fm_get_api_version(t_handle h_fm, ioc_fm_api_version_t *p_version);
+
+t_handle fm_open(uint8_t id)
+{
+ t_device *p_dev;
+ int fd;
+ char dev_name[20];
+ static bool called;
+ ioc_fm_api_version_t ver;
+
+ _fml_dbg("Calling...\n");
+
+ p_dev = (t_device *)malloc(sizeof(t_device));
+ if (!p_dev)
+ return NULL;
+
+ memset(dev_name, 0, 20);
+ sprintf(dev_name, "%s%s%d", "/dev/", DEV_FM_NAME, id);
+ fd = open(dev_name, O_RDWR);
+ if (fd < 0) {
+ free(p_dev);
+ return NULL;
+ }
+
+ p_dev->id = id;
+ p_dev->fd = fd;
+ if (!called) {
+ called = true;
+ fm_get_api_version((t_handle)p_dev, &ver);
+
+ if (ver.version.major != FMD_API_VERSION_MAJOR ||
+ ver.version.minor != FMD_API_VERSION_MINOR ||
+ ver.version.respin != FMD_API_VERSION_RESPIN) {
+ DPAA_PMD_WARN("Compiled against FMD API ver %u.%u.%u",
+ FMD_API_VERSION_MAJOR,
+ FMD_API_VERSION_MINOR, FMD_API_VERSION_RESPIN);
+ DPAA_PMD_WARN("Running with FMD API ver %u.%u.%u",
+ ver.version.major, ver.version.minor,
+ ver.version.respin);
+ }
+ }
+ _fml_dbg("Finishing.\n");
+
+ return (t_handle)p_dev;
+}
+
+void fm_close(t_handle h_fm)
+{
+ t_device *p_dev = (t_device *)h_fm;
+
+ _fml_dbg("Calling...\n");
+
+ close(p_dev->fd);
+ free(p_dev);
+
+ _fml_dbg("Finishing.\n");
+}
+
+uint32_t fm_get_api_version(t_handle h_fm, ioc_fm_api_version_t *p_version)
+{
+ t_device *p_dev = (t_device *)h_fm;
+ int ret;
+
+ _fml_dbg("Calling...\n");
+
+ ret = ioctl(p_dev->fd, FM_IOC_GET_API_VERSION, p_version);
+ if (ret) {
+ DPAA_PMD_ERR("cannot get API version, error %i (%s)\n",
+ errno, strerror(errno));
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+ }
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+t_handle fm_pcd_open(t_fm_pcd_params *p_fm_pcd_params)
+{
+ t_device *p_dev;
+ int fd;
+ char dev_name[20];
+
+ _fml_dbg("Calling...\n");
+
+ p_dev = (t_device *)malloc(sizeof(t_device));
+ if (!p_dev)
+ return NULL;
+
+ memset(dev_name, 0, 20);
+ sprintf(dev_name, "%s%s%u-pcd", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_device *)p_fm_pcd_params->h_fm)->id);
+ fd = open(dev_name, O_RDWR);
+ if (fd < 0) {
+ free(p_dev);
+ return NULL;
+ }
+
+ p_dev->id = ((t_device *)p_fm_pcd_params->h_fm)->id;
+ p_dev->fd = fd;
+ p_dev->owners = 0;
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_handle)p_dev;
+}
+
+void fm_pcd_close(t_handle h_fm_pcd)
+{
+ t_device *p_dev = (t_device *)h_fm_pcd;
+
+ _fml_dbg("Calling...\n");
+
+ close(p_dev->fd);
+
+ if (p_dev->owners) {
+ printf("\nTrying to delete a previously created pcd"
+ " handler(owners:%u)!!\n", p_dev->owners);
+ return;
+ }
+
+ free(p_dev);
+
+ _fml_dbg("Finishing.\n");
+}
+
+uint32_t fm_pcd_enable(t_handle h_fm_pcd)
+{
+ t_device *p_dev = (t_device *)h_fm_pcd;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_dev->fd, FM_PCD_IOC_ENABLE))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+uint32_t fm_pcd_disable(t_handle h_fm_pcd)
+{
+ t_device *p_dev = (t_device *)h_fm_pcd;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_dev->fd, FM_PCD_IOC_DISABLE))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+t_handle fm_pcd_net_env_characteristics_set(t_handle h_fm_pcd,
+ ioc_fm_pcd_net_env_params_t *params)
+{
+ t_device *p_pcd_dev = (t_device *)h_fm_pcd;
+ t_device *p_dev = NULL;
+
+ _fml_dbg("Calling...\n");
+
+ params->id = NULL;
+
+ if (ioctl(p_pcd_dev->fd, FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET,
+ params))
+ return NULL;
+
+ p_dev = (t_device *)malloc(sizeof(t_device));
+ if (!p_dev)
+ return NULL;
+
+ memset(p_dev, 0, sizeof(t_device));
+ p_dev->h_user_priv = (t_handle)p_pcd_dev;
+ p_pcd_dev->owners++;
+ p_dev->id = PTR_TO_UINT(params->id);
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_handle)p_dev;
+}
+
+uint32_t fm_pcd_net_env_characteristics_delete(t_handle h_net_env)
+{
+ t_device *p_dev = (t_device *)h_net_env;
+ t_device *p_pcd_dev = NULL;
+ ioc_fm_obj_t id;
+
+ _fml_dbg("Calling...\n");
+
+ p_pcd_dev = (t_device *)p_dev->h_user_priv;
+ id.obj = UINT_TO_PTR(p_dev->id);
+
+ if (ioctl(p_pcd_dev->fd, FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE,
+ &id))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ p_pcd_dev->owners--;
+ free(p_dev);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+t_handle fm_pcd_kg_scheme_set(t_handle h_fm_pcd,
+ ioc_fm_pcd_kg_scheme_params_t *params)
+{
+ t_device *p_pcd_dev = (t_device *)h_fm_pcd;
+ t_device *p_dev = NULL;
+ int ret;
+
+ _fml_dbg("Calling...\n");
+
+ params->id = NULL;
+
+ if (params->param.modify) {
+ if (params->param.scm_id.scheme_id)
+ DEV_TO_ID(params->param.scm_id.scheme_id);
+ else
+ return NULL;
+ }
+
+ /* correct h_net_env param from scheme */
+ if (params->param.net_env_params.net_env_id)
+ DEV_TO_ID(params->param.net_env_params.net_env_id);
+
+ /* correct next engine params handlers: cc*/
+ if (params->param.next_engine == e_IOC_FM_PCD_CC &&
+ params->param.kg_next_engine_params.cc.tree_id)
+ DEV_TO_ID(params->param.kg_next_engine_params.cc.tree_id);
+
+ ret = ioctl(p_pcd_dev->fd, FM_PCD_IOC_KG_SCHEME_SET, params);
+ if (ret) {
+ DPAA_PMD_ERR(" cannot set kg scheme, error %i (%s)\n",
+ errno, strerror(errno));
+ return NULL;
+ }
+
+ p_dev = (t_device *)malloc(sizeof(t_device));
+ if (!p_dev)
+ return NULL;
+
+ memset(p_dev, 0, sizeof(t_device));
+ p_dev->h_user_priv = (t_handle)p_pcd_dev;
+ /* increase owners only if a new scheme is created */
+ if (!params->param.modify)
+ p_pcd_dev->owners++;
+ p_dev->id = PTR_TO_UINT(params->id);
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_handle)p_dev;
+}
+
+uint32_t fm_pcd_kg_scheme_delete(t_handle h_scheme)
+{
+ t_device *p_dev = (t_device *)h_scheme;
+ t_device *p_pcd_dev = NULL;
+ ioc_fm_obj_t id;
+
+ _fml_dbg("Calling...\n");
+
+ p_pcd_dev = (t_device *)p_dev->h_user_priv;
+ id.obj = UINT_TO_PTR(p_dev->id);
+
+ if (ioctl(p_pcd_dev->fd, FM_PCD_IOC_KG_SCHEME_DELETE, &id)) {
+ DPAA_PMD_WARN("cannot delete kg scheme, error %i (%s)\n",
+ errno, strerror(errno));
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+ }
+
+ p_pcd_dev->owners--;
+ free(p_dev);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+#ifdef FM_CAPWAP_SUPPORT
+#error CAPWAP feature not supported
+#endif
+
+typedef struct {
+ e_fm_port_type port_type; /**< Port type */
+ uint8_t port_id; /**< Port Id - relative to type */
+} t_fm_port;
+
+t_handle fm_port_open(t_fm_port_params *p_fm_port_params)
+{
+ t_device *p_dev;
+ int fd;
+ char dev_name[30];
+ t_fm_port *p_fm_port;
+
+ _fml_dbg("Calling...\n");
+
+ p_dev = (t_device *)malloc(sizeof(t_device));
+ if (!p_dev)
+ return NULL;
+
+ memset(p_dev, 0, sizeof(t_device));
+
+ p_fm_port = (t_fm_port *)malloc(sizeof(t_fm_port));
+ if (!p_fm_port) {
+ free(p_dev);
+ return NULL;
+ }
+ memset(p_fm_port, 0, sizeof(t_fm_port));
+ memset(dev_name, 0, sizeof(dev_name));
+ switch (p_fm_port_params->port_type) {
+ case e_FM_PORT_TYPE_OH_OFFLINE_PARSING:
+ sprintf(dev_name, "%s%s%u-port-oh%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+ p_fm_port_params->port_id);
+ break;
+ case e_FM_PORT_TYPE_RX:
+ sprintf(dev_name, "%s%s%u-port-rx%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+ p_fm_port_params->port_id);
+ break;
+ case e_FM_PORT_TYPE_RX_10G:
+ sprintf(dev_name, "%s%s%u-port-rx%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+ FM_MAX_NUM_OF_1G_RX_PORTS + p_fm_port_params->port_id);
+ break;
+ case e_FM_PORT_TYPE_TX:
+ sprintf(dev_name, "%s%s%u-port-tx%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+ p_fm_port_params->port_id);
+ break;
+ case e_FM_PORT_TYPE_TX_10G:
+ sprintf(dev_name, "%s%s%u-port-tx%d", "/dev/", DEV_FM_NAME,
+ (uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+ FM_MAX_NUM_OF_1G_TX_PORTS + p_fm_port_params->port_id);
+ break;
+ default:
+ free(p_fm_port);
+ free(p_dev);
+ return NULL;
+ }
+
+ fd = open(dev_name, O_RDWR);
+ if (fd < 0) {
+ free(p_fm_port);
+ free(p_dev);
+ return NULL;
+ }
+
+ p_fm_port->port_type = p_fm_port_params->port_type;
+ p_fm_port->port_id = p_fm_port_params->port_id;
+ p_dev->id = p_fm_port_params->port_id;
+ p_dev->fd = fd;
+ p_dev->h_user_priv = (t_handle)p_fm_port;
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_handle)p_dev;
+}
+
+void fm_port_close(t_handle h_fm_port)
+{
+ t_device *p_dev = (t_device *)h_fm_port;
+
+ _fml_dbg("Calling...\n");
+
+ close(p_dev->fd);
+ if (p_dev->h_user_priv)
+ free(p_dev->h_user_priv);
+ free(p_dev);
+
+ _fml_dbg("Finishing.\n");
+}
+
+uint32_t fm_port_disable(t_handle h_fm_port)
+{
+ t_device *p_dev = (t_device *)h_fm_port;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_dev->fd, FM_PORT_IOC_DISABLE))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+uint32_t fm_port_enable(t_handle h_fm_port)
+{
+ t_device *p_dev = (t_device *)h_fm_port;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_dev->fd, FM_PORT_IOC_ENABLE))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+uint32_t fm_port_set_pcd(t_handle h_fm_port,
+ ioc_fm_port_pcd_params_t *p)
+{
+ t_device *p_dev = (t_device *)h_fm_port;
+
+ _fml_dbg("Calling...\n");
+
+ /* correct h_net_env param from t_fm_portPcdParams */
+ DEV_TO_ID(p->net_env_id);
+
+ /* correct pcd structures according to what support was set */
+ if (p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC ||
+ p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC_AND_PLCR ||
+ p->pcd_support == e_IOC_FM_PCD_PRS_CC) {
+ if (p->p_cc_params && p->p_cc_params->cc_tree_id)
+ DEV_TO_ID(p->p_cc_params->cc_tree_id);
+ else
+ DPAA_PMD_WARN("Coarse Clasification not set !");
+ }
+
+ if (p->pcd_support == e_IOC_FM_PCD_PRS_KG ||
+ p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC ||
+ p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC_AND_PLCR ||
+ p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_PLCR){
+ if (p->p_kg_params) {
+ uint32_t i;
+ ioc_fm_port_pcd_kg_params_t *kg_params;
+
+ kg_params = p->p_kg_params;
+
+ for (i = 0; i < kg_params->num_schemes; i++)
+ if (kg_params->scheme_ids[i])
+ DEV_TO_ID(kg_params->scheme_ids[i]);
+ else
+ DPAA_PMD_WARN("Scheme:%u not set!!", i);
+
+ if (kg_params->direct_scheme)
+ DEV_TO_ID(kg_params->direct_scheme_id);
+ } else {
+ DPAA_PMD_WARN("KeyGen not set !");
+ }
+ }
+
+ if (p->pcd_support == e_IOC_FM_PCD_PLCR_ONLY ||
+ p->pcd_support == e_IOC_FM_PCD_PRS_PLCR ||
+ p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC_AND_PLCR ||
+ p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_PLCR) {
+ if (p->p_plcr_params) {
+ if (p->p_plcr_params->plcr_profile_id)
+ DEV_TO_ID(p->p_plcr_params->plcr_profile_id);
+ else
+ DPAA_PMD_WARN("Policer not set !");
+ }
+ }
+
+ if (p->p_ip_reassembly_manip)
+ DEV_TO_ID(p->p_ip_reassembly_manip);
+
+#if (DPAA_VERSION >= 11)
+ if (p->p_capwap_reassembly_manip)
+ DEV_TO_ID(p->p_capwap_reassembly_manip);
+#endif
+
+ if (ioctl(p_dev->fd, FM_PORT_IOC_SET_PCD, p))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+uint32_t fm_port_delete_pcd(t_handle h_fm_port)
+{
+ t_device *p_dev = (t_device *)h_fm_port;
+
+ _fml_dbg("Calling...\n");
+
+ if (ioctl(p_dev->fd, FM_PORT_IOC_DELETE_PCD))
+ RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+ _fml_dbg("Finishing.\n");
+
+ return E_OK;
+}
+
+t_handle create_device(t_handle h_user_priv, t_handle h_dev_id)
+{
+ t_device *p_user_priv_dev = (t_device *)h_user_priv;
+ t_device *p_dev = NULL;
+
+ _fml_dbg("Calling...\n");
+
+ p_dev = (t_device *)malloc(sizeof(t_device));
+ if (!p_dev)
+ return NULL;
+
+ memset(p_dev, 0, sizeof(t_device));
+ p_dev->h_user_priv = h_user_priv;
+ p_user_priv_dev->owners++;
+ p_dev->id = PTR_TO_UINT(h_dev_id);
+
+ _fml_dbg("Finishing.\n");
+
+ return (t_handle)p_dev;
+}
+
+t_handle get_device_id(t_handle h_dev)
+{
+ t_device *p_dev = (t_device *)h_dev;
+
+ return (t_handle)p_dev->id;
+}
+
+#if defined FMAN_V3H
+void platform_is_fman_v3h(void)
+{
+}
+#elif defined FMAN_V3L
+void platform_is_fman_v3l(void)
+{
+}
+#endif
new file mode 100644
@@ -0,0 +1,6302 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __FM_PCD_EXT_H
+#define __FM_PCD_EXT_H
+
+#include "ncsw_ext.h"
+#include "net_ext.h"
+#include "fm_ext.h"
+
+/*
+ * @Description FM PCD ...
+ * @Group lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
+ * @Description Frame Manager Linux ioctls definitions and enums
+ * @{
+ */
+
+/*
+ * @Group lnx_ioctl_FM_PCD_grp FM PCD
+ * @Description Frame Manager PCD API functions, definitions and enums
+ *
+ * The FM PCD module is responsible for the initialization of all
+ * global classifying FM modules. This includes the parser
+ * general and common registers, the key generator global and
+ * common registers, and the policer global and common registers.
+ * In addition, the FM PCD SW module will initialize all required
+ * key generator schemes, coarse classification flows, and
+ * policer profiles. When an FM module is configured to work with
+ * one of these entities, it will register to it using the FM
+ * PORT API. The PCD module will manage the PCD resources - i.e.
+ * resource management of KeyGen schemes, etc.
+ *
+ * @{
+ */
+
+/*
+ * @Collection General PCD defines
+ */
+#define IOC_FM_PCD_MAX_NUM_OF_PRIVATE_HDRS 2
+/**< Number of units/headers saved for user */
+
+#define IOC_FM_PCD_PRS_NUM_OF_HDRS 16
+/**< Number of headers supported by HW parser */
+#define IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS \
+ (32 - IOC_FM_PCD_MAX_NUM_OF_PRIVATE_HDRS)
+/**< Number of distinction units is limited by register size (32 bits) minus
+ * reserved bits for private headers.
+ */
+#define IOC_FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS 4
+/**< Maximum number of interchangeable headers in a distinction unit */
+#define IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS 8
+/**< Total number of generic KeyGen registers */
+#define IOC_FM_PCD_KG_MAX_EXTRACTS_PER_KEY 35
+/**< Max number allowed on any configuration; For HW implementation reasons,
+ * in most cases less than this will be allowed; The driver will return an
+ * initialization error if resource is unavailable.
+ */
+#define IOC_FM_PCD_KG_NUM_OF_EXTRACT_MASKS 4
+/**< Total number of masks allowed on KeyGen extractions. */
+#define IOC_FM_PCD_KG_NUM_OF_DEFAULT_GROUPS 16
+/**< Number of default value logical groups */
+#define IOC_FM_PCD_PRS_NUM_OF_LABELS 32
+/**< Maximum number of SW parser labels */
+#define IOC_FM_PCD_SW_PRS_SIZE 0x00000800
+/**< Total size of SW parser area */
+
+#define IOC_FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE 128
+/**< Maximum size of insertion template for insert manipulation */
+
+#define IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES 64
+/**< Maximum possible entries for frame replicator group */
+/* @} */
+
+#ifdef FM_CAPWAP_SUPPORT
+#error "FM_CAPWAP_SUPPORT not implemented!"
+#endif
+
+/*
+ * @Group lnx_ioctl_FM_PCD_init_grp FM PCD Initialization Unit
+ *
+ * @Description Frame Manager PCD Initialization Unit API
+ *
+ * @{
+ */
+
+/*
+ * @Description PCD counters
+ * (must match enum ioc_fm_pcd_counters defined in fm_pcd_ext.h)
+ */
+typedef enum ioc_fm_pcd_counters {
+ e_IOC_FM_PCD_KG_COUNTERS_TOTAL, /**< KeyGen counter */
+ e_IOC_FM_PCD_PLCR_COUNTERS_RED,
+ /**< Policer counter - counts the total number of RED packets that exit
+ * the Policer.
+ */
+ e_IOC_FM_PCD_PLCR_COUNTERS_YELLOW,
+ /**< Policer counter - counts the total number of YELLOW packets that
+ * exit the Policer.
+ */
+ e_IOC_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED,
+ /**< Policer counter - counts the number of packets that changed color
+ * to RED by the Policer; This is a subset of
+ * e_IOC_FM_PCD_PLCR_COUNTERS_RED packet count, indicating active color
+ * changes.
+ */
+ e_IOC_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW,
+ /**< Policer counter - counts the number of packets that changed color
+ * to YELLOW by the Policer; This is a subset of
+ * e_IOC_FM_PCD_PLCR_COUNTERS_YELLOW packet count, indicating active
+ * color changes.
+ */
+ e_IOC_FM_PCD_PLCR_COUNTERS_TOTAL,
+ /**< Policer counter - counts the total number of packets passed in the
+ * Policer.
+ */
+ e_IOC_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH,
+ /**< Policer counter - counts the number of packets with length
+ * mismatch.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH,
+ /**< Parser counter - counts the number of times the parser block is
+ * dispatched.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED,
+ /**< Parser counter - counts the number of times L2 parse result is
+ * returned (including errors).
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED,
+ /**< Parser counter - counts the number of times L3 parse result is
+ * returned (including errors).
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED,
+ /**< Parser counter - counts the number of times L4 parse result is
+ * returned (including errors).
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED,
+ /**< Parser counter - counts the number of times SHIM parse result is
+ * returned (including errors).
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR,
+ /**< Parser counter - counts the number of times L2 parse result is
+ * returned with errors.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR,
+ /**< Parser counter - counts the number of times L3 parse result is
+ * returned with errors.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR,
+ /**< Parser counter - counts the number of times L4 parse result is
+ * returned with errors.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR,
+ /**< Parser counter - counts the number of times SHIM parse result is
+ * returned with errors.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES,
+ /**< Parser counter - counts the number of cycles spent executing soft
+ * parser instruction (including stall cycles).
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES,
+ /**< Parser counter - counts the number of cycles stalled waiting for
+ * parser internal memory reads while executing soft parser instruction.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES,
+ /**< Parser counter - counts the number of cycles spent executing hard
+ * parser (including stall cycles).
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES,
+ /**< MURAM counter - counts the number of cycles while performing FMan
+ * Memory read.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES,
+ /**< MURAM counter - counts the number of cycles stalled while
+ * performing FMan Memory read.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES,
+ /**< MURAM counter - counts the number of cycles while performing FMan
+ * Memory write.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES,
+ /**< MURAM counter - counts the number of cycles stalled while
+ * performing FMan Memory write.
+ */
+ e_IOC_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES
+ /**< FPM counter - counts the number of cycles stalled while performing
+ * a FPM Command.
+ */
+} ioc_fm_pcd_counters;
+
+/*
+ * @Description PCD interrupts
+ * (must match enum ioc_fm_pcd_exceptions defined in
+ * fm_pcd_ext.h)
+ */
+typedef enum ioc_fm_pcd_exceptions {
+ e_IOC_FM_PCD_KG_EXCEPTION_DOUBLE_ECC,
+ /**< KeyGen double-bit ECC error is detected on internal memory read
+ * access.
+ */
+ e_IOC_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW,
+ /**< KeyGen scheme configuration error indicating a key size larger than
+ * 56 bytes.
+ */
+ e_IOC_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC,
+ /**< Policer double-bit ECC error has been detected on PRAM read access.
+ */
+ e_IOC_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR,
+ /**< Policer access to a non-initialized profile has been detected. */
+ e_IOC_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE,
+ /**< Policer RAM self-initialization complete */
+ e_IOC_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE,
+ /**< Policer atomic action complete */
+ e_IOC_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC,
+ /**< Parser double-bit ECC error */
+ e_IOC_FM_PCD_PRS_EXCEPTION_SINGLE_ECC
+ /**< Parser single-bit ECC error */
+} ioc_fm_pcd_exceptions;
+
+/** @} */ /* end of lnx_ioctl_FM_PCD_init_grp group */
+
+/*
+ * @Group lnx_ioctl_FM_PCD_Runtime_grp FM PCD Runtime Unit
+ *
+ * @Description Frame Manager PCD Runtime Unit
+ *
+ * The runtime control allows creation of PCD infrastructure
+ * modules such as Network Environment Characteristics,
+ * Classification Plan Groups and Coarse Classification Trees.
+ * It also allows on-the-fly initialization, modification and
+ * removal of PCD modules such as KeyGen schemes, coarse
+ * classification nodes and Policer profiles.
+ *
+ * In order to explain the programming model of the PCD driver
+ * interface a few terms should be explained, and will be used
+ * below.
+ * - Distinction Header - One of the 16 protocols supported by
+ * the FM parser, or one of the SHIM headers (1 or 2). May be a
+ * header with a special option (see below).
+ * - Interchangeable Headers Group - This is a group of Headers
+ * recognized by either one of them. For example, if in a
+ * specific context the user chooses to treat IPv4 and IPV6 in
+ * the same way, they may create an interchangeable Headers
+ * Unit consisting of these 2 headers.
+ * - A Distinction Unit - a Distinction Header or an
+ * Interchangeable Headers Group.
+ * - Header with special option - applies to Ethernet, MPLS,
+ * VLAN, IPv4 and IPv6, includes multicast, broadcast and other
+ * protocol specific options. In terms of hardware it relates
+ * to the options available in the classification plan.
+ * - Network Environment Characteristics - a set of Distinction
+ * Units that define the total recognizable header selection
+ * for a certain environment. This is NOT the list of all
+ * headers that will ever appear in a flow, but rather
+ * everything that needs distinction in a flow, where
+ * distinction is made by KeyGen schemes and coarse
+ * classification action descriptors.
+ *
+ * The PCD runtime modules initialization is done in stages. The
+ * first stage after initializing the PCD module itself is to
+ * establish a Network Flows Environment Definition. The
+ * application may choose to establish one or more such
+ * environments. Later, when needed, the application will have to
+ * state, for some of its modules, to which single environment it
+ * belongs.
+ *
+ * @{
+ */
+
+/*
+ * @Description structure for FM counters
+ */
+typedef struct ioc_fm_pcd_counters_params_t {
+ ioc_fm_pcd_counters cnt; /**< The requested counter */
+ uint32_t val;
+ /**< The requested value to get/set from/into the
+ * counter
+ */
+} ioc_fm_pcd_counters_params_t;
+
+/*
+ * @Description structure for FM exception definitios
+ */
+typedef struct ioc_fm_pcd_exception_params_t {
+ ioc_fm_pcd_exceptions exception; /**< The requested exception */
+ bool enable;
+ /**< TRUE to enable interrupt, FALSE to mask it. */
+} ioc_fm_pcd_exception_params_t;
+
+/*
+ * @Description A structure for SW parser labels (must be identical to struct
+ * t_fm_pcd_prs_label_params defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_label_params_t {
+ uint32_t instruction_offset;
+ /**< SW parser label instruction offset (2 bytes resolution),
+ * relative to Parser RAM
+ */
+ ioc_net_header_type hdr;
+ /**< The existence of this header will invoke the SW parser
+ * code.
+ */
+ uint8_t index_per_hdr;
+ /**< Normally 0, if more than one SW parser attachments for the
+ * same header, use this index to distinguish between them.
+ */
+} ioc_fm_pcd_prs_label_params_t;
+
+/*
+ * @Description A structure for SW parser (Must match struct
+ * ioc_fm_pcd_prs_sw_params_t defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_sw_params_t {
+ bool override;
+ /**< FALSE to invoke a check that nothing else was
+ * loaded to this address, including internal patches.
+ * TRUE to override any existing code.
+ */
+ uint32_t size; /**< SW parser code size */
+ uint16_t base;
+ /**< SW parser base (in instruction counts! must be
+ * larger than 0x20)
+ */
+ uint8_t *p_code; /**< SW parser code */
+ uint32_t sw_prs_data_params[IOC_FM_PCD_PRS_NUM_OF_HDRS];
+ /**< SW parser data (parameters) */
+ uint8_t num_of_labels; /**< Number of labels for SW parser. */
+ ioc_fm_pcd_prs_label_params_t
+ labels_table[IOC_FM_PCD_PRS_NUM_OF_LABELS];
+ /**< SW parser labels table, containing num_of_labels
+ * entries
+ */
+} ioc_fm_pcd_prs_sw_params_t;
+
+/*
+ * @Description A structure to set the a KeyGen default value
+ */
+typedef struct ioc_fm_pcd_kg_dflt_value_params_t {
+ uint8_t value_id;/**< 0,1 - one of 2 global default values */
+ uint32_t value; /**< The requested default value */
+} ioc_fm_pcd_kg_dflt_value_params_t;
+
+/*
+ * @Function fm_pcd_enable
+ *
+ * @Description This routine should be called after PCD is initialized for
+ * enabling all PCD engines according to their existing
+ * configuration.
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only when PCD is disabled.
+ */
+#define FM_PCD_IOC_ENABLE _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(1))
+
+/*
+ * @Function fm_pcd_disable
+ *
+ * @Description This routine may be called when PCD is enabled in order to
+ * disable all PCD engines. It may be called only when none of
+ * the ports in the system are using the PCD.
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only when PCD is enabled.
+ */
+#define FM_PCD_IOC_DISABLE _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(2))
+
+/*
+ * @Function fm_pcd_prs_load_sw
+ *
+ * @Description This routine may be called only when all ports in the
+ * system are actively using the classification plan scheme.
+ * In such cases it is recommended in order to save resources.
+ * The driver automatically saves 8 classification plans for
+ * ports that do NOT use the classification plan mechanism, to
+ * avoid this (in order to save those entries) this routine may
+ * be called.
+ *
+ * @Param[in] ioc_fm_pcd_prs_sw_params_t
+ * A pointer to the image of the software parser code.
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only when PCD is disabled.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_PRS_LOAD_SW_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), \
+ ioc_compat_fm_pcd_prs_sw_params_t)
+#endif
+#define FM_PCD_IOC_PRS_LOAD_SW \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_fm_pcd_prs_sw_params_t)
+
+/*
+ * @Function fm_pcd_kg_set_dflt_value
+ *
+ * @Description Calling this routine sets a global default value to be used
+ * by the KeyGen when parser does not recognize a required
+ * field/header.
+ * By default default values are 0.
+ *
+ * @Param[in] ioc_fm_pcd_kg_dflt_value_params_t A pointer to a structure
+ * with the relevant
+ * parameters
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only when PCD is disabled.
+ */
+#define FM_PCD_IOC_KG_SET_DFLT_VALUE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(6), \
+ ioc_fm_pcd_kg_dflt_value_params_t)
+
+/*
+ * @Function fm_pcd_kg_set_additional_data_after_parsing
+ *
+ * @Description Calling this routine allows the keygen to access data past
+ * the parser finishing point.
+ *
+ * @Param[in] uint8_t payload-offset; the number of bytes beyond the
+ * parser location.
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only when PCD is disabled.
+ */
+#define FM_PCD_IOC_KG_SET_ADDITIONAL_DATA_AFTER_PARSING \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(7), uint8_t)
+
+/*
+ * @Function fm_pcd_set_exception
+ *
+ * @Description Calling this routine enables/disables PCD interrupts.
+ *
+ * @Param[in] ioc_fm_pcd_exception_params_t
+ * Arguments struct with exception to be enabled/disabled.
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_SET_EXCEPTION \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(8), ioc_fm_pcd_exception_params_t)
+
+/*
+ * @Function fm_pcd_get_counter
+ *
+ * @Description Reads one of the FM PCD counters.
+ *
+ * @Param[in,out] ioc_fm_pcd_counters_params_t The requested counter parameters.
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Note that it is user's responsibilty to call this routine only
+ * for enabled counters, and there will be no indication if a
+ * disabled counter is accessed.
+ */
+#define FM_PCD_IOC_GET_COUNTER \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(9), ioc_fm_pcd_counters_params_t)
+
+/*
+ * @Function fm_pcd_kg_scheme_get_counter
+ *
+ * @Description Reads scheme packet counter.
+ *
+ * @Param[in] h_scheme scheme handle as returned by
+ * fm_pcd_kg_scheme_set().
+ *
+ * @Return Counter's current value.
+ *
+ * @Cautions Allowed only following fm_pcd_init() & fm_pcd_kg_scheme_set().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_KG_SCHEME_GET_CNTR_COMPAT \
+ _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), \
+ ioc_compat_fm_pcd_kg_scheme_spc_t)
+#endif
+#define FM_PCD_IOC_KG_SCHEME_GET_CNTR \
+ _IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_fm_pcd_kg_scheme_spc_t)
+
+/*
+ * @Function FM_PCD_ForceIntr
+ *
+ * @Description Causes an interrupt event on the requested source.
+ *
+ * @Param[in] ioc_fm_pcd_exceptions - An exception to be forced.
+ *
+ * @Return 0 on success; error code if the exception is not enabled,
+ * or is not able to create interrupt.
+ */
+#define FM_PCD_IOC_FORCE_INTR \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(11), ioc_fm_pcd_exceptions)
+
+/*
+ * @Collection Definitions of coarse classification parameters as required by
+ * KeyGen (when coarse classification is the next engine after this
+ * scheme).
+ */
+#define IOC_FM_PCD_MAX_NUM_OF_CC_TREES 8
+#define IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS 16
+#define IOC_FM_PCD_MAX_NUM_OF_CC_UNITS 4
+#define IOC_FM_PCD_MAX_NUM_OF_KEYS 256
+#define IOC_FM_PCD_MAX_NUM_OF_FLOWS (4 * KILOBYTE)
+#define IOC_FM_PCD_MAX_SIZE_OF_KEY 56
+#define IOC_FM_PCD_MAX_CC_ENTRY_IN_GRP 16
+#define IOC_FM_PCD_LAST_KEY_INDEX 0xffff
+#define IOC_FM_PCD_MANIP_DSCP_VALUES 64
+/* @} */
+
+/*
+ * @Collection A set of definitions to allow protocol
+ * special option description.
+ */
+typedef uint32_t ioc_protocol_opt_t;
+ /**< A general type to define a protocol option. */
+
+typedef ioc_protocol_opt_t ioc_eth_protocol_opt_t;
+ /**< Ethernet protocol options. */
+#define IOC_ETH_BROADCAST 0x80000000 /**< Ethernet Broadcast. */
+#define IOC_ETH_MULTICAST 0x40000000 /**< Ethernet Multicast. */
+
+typedef ioc_protocol_opt_t ioc_vlan_protocol_opt_t;
+ /**< Vlan protocol options. */
+#define IOC_VLAN_STACKED 0x20000000 /**< Stacked VLAN. */
+
+typedef ioc_protocol_opt_t ioc_mpls_protocol_opt_t;
+ /**< MPLS protocol options. */
+#define IOC_MPLS_STACKED 0x10000000 /**< Stacked MPLS. */
+
+typedef ioc_protocol_opt_t ioc_ipv4_protocol_opt_t;
+ /**< IPv4 protocol options. */
+#define IOC_IPV4_BROADCAST_1 0x08000000 /**< IPv4 Broadcast. */
+#define IOC_IPV4_MULTICAST_1 0x04000000 /**< IPv4 Multicast. */
+#define IOC_IPV4_UNICAST_2 0x02000000
+ /**< Tunneled IPv4 - Unicast.
+ */
+#define IOC_IPV4_MULTICAST_BROADCAST_2 0x01000000
+ /**< Tunneled IPv4 -
+ * Broadcast/Multicast.
+ */
+
+#define IOC_IPV4_FRAG_1 0x00000008
+ /**< IPV4 reassembly option. IPV4
+ * Reassembly manipulation requires network
+ * environment with IPV4 header and IPV4_FRAG_1
+ * option
+ */
+
+typedef ioc_protocol_opt_t ioc_ipv6_protocol_opt_t;
+ /**< IPv6 protocol options. */
+#define IOC_IPV6_MULTICAST_1 0x00800000 /**< IPv6 Multicast. */
+#define IOC_IPV6_UNICAST_2 0x00400000
+ /**< Tunneled IPv6 - Unicast. */
+#define IOC_IPV6_MULTICAST_2 0x00200000
+ /**< Tunneled IPv6 - Multicast. */
+
+#define IOC_IPV6_FRAG_1 0x00000004
+ /**< IPV6 reassembly option. IPV6 Reassembly
+ * manipulation requires network environment
+ * with IPV6 header and IPV6_FRAG_1 option
+ */
+#if (DPAA_VERSION >= 11)
+typedef ioc_protocol_opt_t ioc_capwap_protocol_opt_t;
+ /**< CAPWAP protocol options. */
+#define CAPWAP_FRAG_1 0x00000008
+ /**< CAPWAP reassembly option. CAPWAP Reassembly
+ * manipulation requires network environment
+ * with CAPWAP header and CAPWAP_FRAG_1 option;
+ * in case where fragment found, the
+ * fragment-extension offset may be found at
+ * 'shim2' (in parser-result).
+ */
+#endif /* (DPAA_VERSION >= 11) */
+
+/* @} */
+
+#define IOC_FM_PCD_MANIP_MAX_HDR_SIZE 256
+#define IOC_FM_PCD_MANIP_DSCP_TO_VLAN_TRANS 64
+/**
+ * @Collection A set of definitions to support Header Manipulation selection.
+ */
+typedef uint32_t ioc_hdr_manip_flags_t;
+ /**< A general type to define a HMan update command flags. */
+
+typedef ioc_hdr_manip_flags_t ioc_ipv4_hdr_manip_update_flags_t;
+ /**< IPv4 protocol HMan update command flags. */
+
+#define IOC_HDR_MANIP_IPV4_TOS 0x80000000
+ /**< update TOS with the given value ('tos' field of
+ * ioc_fm_pcd_manip_hdr_field_update_ipv4_t)
+ */
+#define IOC_HDR_MANIP_IPV4_ID 0x40000000
+ /**< update IP ID with the given value ('id' field of
+ * ioc_fm_pcd_manip_hdr_field_update_ipv4_t)
+ */
+#define IOC_HDR_MANIP_IPV4_TTL 0x20000000 /**< Decrement TTL by 1 */
+#define IOC_HDR_MANIP_IPV4_SRC 0x10000000
+ /**< update IP source address with the given value ('src' field
+ * of ioc_fm_pcd_manip_hdr_field_update_ipv4_t)
+ */
+#define IOC_HDR_MANIP_IPV4_DST 0x08000000
+ /**< update IP destination address with the given value
+ * ('dst' field of ioc_fm_pcd_manip_hdr_field_update_ipv4_t)
+ */
+
+typedef ioc_hdr_manip_flags_t ioc_ipv6_hdr_manip_update_flags_t;
+ /**< IPv6 protocol HMan update command flags. */
+
+#define IOC_HDR_MANIP_IPV6_TC 0x80000000
+ /**< update Traffic Class address with the given value ('traffic_class'
+ * field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t)
+ */
+#define IOC_HDR_MANIP_IPV6_HL 0x40000000 /**< Decrement Hop Limit by 1 */
+#define IOC_HDR_MANIP_IPV6_SRC 0x20000000
+ /**< update IP source address with the given value ('src' field
+ * of ioc_fm_pcd_manip_hdr_field_update_ipv6_t)
+ */
+#define IOC_HDR_MANIP_IPV6_DST 0x10000000
+ /**< update IP destination address with the given value ('dst'
+ * field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t)
+ */
+
+typedef ioc_hdr_manip_flags_t ioc_tcp_udp_hdr_manip_update_flags_t;
+ /**< TCP/UDP protocol HMan update command flags. */
+
+#define IOC_HDR_MANIP_TCP_UDP_SRC 0x80000000
+ /**< update TCP/UDP source address with the given value
+ * ('src' field of ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t)
+ */
+#define IOC_HDR_MANIP_TCP_UDP_DST 0x40000000
+ /**< update TCP/UDP destination address with the given value
+ * ('dst' field of ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t)
+ */
+#define IOC_HDR_MANIP_TCP_UDP_CHECKSUM 0x20000000
+ /**< update TCP/UDP checksum */
+
+/* @} */
+
+/*
+ * @Description A type used for returning the order of the key extraction.
+ * each value in this array represents the index of the
+ * extraction command as defined by the user in the
+ * initialization extraction array. The valid size of this array
+ * is the user define number of extractions required (also
+ * marked by the second '0' in this array).
+ */
+typedef uint8_t
+ ioc_fm_pcd_kg_key_order_t [IOC_FM_PCD_KG_MAX_EXTRACTS_PER_KEY];
+
+/*
+ *@Description All PCD engines
+ * (must match enum e_FmPcdEngine defined in fm_pcd_ext.h)
+ */
+
+typedef enum ioc_fm_pcd_engine {
+ e_IOC_FM_PCD_INVALID = 0, /**< Invalid PCD engine */
+ e_IOC_FM_PCD_DONE, /**< No PCD Engine indicated */
+ e_IOC_FM_PCD_KG, /**< KeyGen */
+ e_IOC_FM_PCD_CC, /**< Coarse Classifier */
+ e_IOC_FM_PCD_PLCR, /**< Policer */
+ e_IOC_FM_PCD_PRS, /**< Parser */
+#if DPAA_VERSION >= 11
+ e_IOC_FM_PCD_FR, /**< Frame Replicator */
+#endif /* DPAA_VERSION >= 11 */
+ e_IOC_FM_PCD_HASH /**< Hash Table */
+} ioc_fm_pcd_engine;
+
+/*
+ * @Description An enum for selecting extraction by header types
+ * (Must match enum e_FmPcdExtractByHdrType defined in
+ * fm_pcd_ext.h)
+ */
+typedef enum ioc_fm_pcd_extract_by_hdr_type {
+ e_IOC_FM_PCD_EXTRACT_FROM_HDR, /**< Extract bytes from header */
+ e_IOC_FM_PCD_EXTRACT_FROM_FIELD,/**< Extract bytes from header field */
+ e_IOC_FM_PCD_EXTRACT_FULL_FIELD /**< Extract a full field */
+} ioc_fm_pcd_extract_by_hdr_type;
+
+/*
+ * @Description An enum for selecting extraction source (when it is not the
+ * header) (Must match enum e_FmPcdExtractFrom defined in
+ * fm_pcd_ext.h)
+ */
+typedef enum ioc_fm_pcd_extract_from {
+ e_IOC_FM_PCD_EXTRACT_FROM_FRAME_START,
+ /**< KG & CC: Extract from beginning of frame */
+ e_IOC_FM_PCD_EXTRACT_FROM_DFLT_VALUE,
+ /**< KG only: Extract from a default value */
+ e_IOC_FM_PCD_EXTRACT_FROM_CURR_END_OF_PARSE,
+ /**< KG only: Extract from the point where parsing had
+ * finished
+ */
+ e_IOC_FM_PCD_EXTRACT_FROM_KEY, /**< CC only: Field where saved KEY */
+ e_IOC_FM_PCD_EXTRACT_FROM_HASH, /**< CC only: Field where saved HASH */
+ e_IOC_FM_PCD_EXTRACT_FROM_PARSE_RESULT,
+ /**< KG & CC: Extract from the parser result */
+ e_IOC_FM_PCD_EXTRACT_FROM_ENQ_FQID,
+ /**< KG & CC: Extract from enqueue FQID */
+ e_IOC_FM_PCD_EXTRACT_FROM_FLOW_ID
+ /**< CC only: Field where saved Dequeue FQID */
+} ioc_fm_pcd_extract_from;
+
+/*
+ * @Description An enum for selecting extraction type
+ */
+typedef enum ioc_fm_pcd_extract_type {
+ e_IOC_FM_PCD_EXTRACT_BY_HDR, /**< Extract according to header */
+ e_IOC_FM_PCD_EXTRACT_NON_HDR,
+ /**< Extract from data that is not the header */
+ e_IOC_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO
+ /**< Extract private info as specified by user */
+} ioc_fm_pcd_extract_type;
+
+/*
+ * @Description An enum for selecting a default
+ */
+typedef enum ioc_fm_pcd_kg_extract_dflt_select {
+ e_IOC_FM_PCD_KG_DFLT_GBL_0,
+ /**< Default selection is KG register 0 */
+ e_IOC_FM_PCD_KG_DFLT_GBL_1,
+ /**< Default selection is KG register 1 */
+ e_IOC_FM_PCD_KG_DFLT_PRIVATE_0,
+ /**< Default selection is a per scheme register 0 */
+ e_IOC_FM_PCD_KG_DFLT_PRIVATE_1,
+ /**< Default selection is a per scheme register 1 */
+ e_IOC_FM_PCD_KG_DFLT_ILLEGAL /**< Illegal selection */
+} ioc_fm_pcd_kg_extract_dflt_select;
+
+/*
+ * @Description Enumeration type defining all default groups - each group
+ * shares a default value, one of four user-initialized values.
+ */
+typedef enum ioc_fm_pcd_kg_known_fields_dflt_types {
+ e_IOC_FM_PCD_KG_MAC_ADDR, /**< MAC Address */
+ e_IOC_FM_PCD_KG_TCI, /**< TCI field */
+ e_IOC_FM_PCD_KG_ENET_TYPE, /**< ENET Type */
+ e_IOC_FM_PCD_KG_PPP_SESSION_ID, /**< PPP Session id */
+ e_IOC_FM_PCD_KG_PPP_PROTOCOL_ID, /**< PPP Protocol id */
+ e_IOC_FM_PCD_KG_MPLS_LABEL, /**< MPLS label */
+ e_IOC_FM_PCD_KG_IP_ADDR, /**< IP addr */
+ e_IOC_FM_PCD_KG_PROTOCOL_TYPE, /**< Protocol type */
+ e_IOC_FM_PCD_KG_IP_TOS_TC, /**< TOS or TC */
+ e_IOC_FM_PCD_KG_IPV6_FLOW_LABEL, /**< IPV6 flow label */
+ e_IOC_FM_PCD_KG_IPSEC_SPI, /**< IPSEC SPI */
+ e_IOC_FM_PCD_KG_L4_PORT, /**< L4 Port */
+ e_IOC_FM_PCD_KG_TCP_FLAG, /**< TCP Flag */
+ e_IOC_FM_PCD_KG_GENERIC_FROM_DATA,
+ /**< grouping implemented by SW, any data extraction that is not
+ * the full field described above
+ */
+ e_IOC_FM_PCD_KG_GENERIC_FROM_DATA_NO_V,
+ /**< grouping implemented by SW, any data extraction without
+ * validation
+ */
+ e_IOC_FM_PCD_KG_GENERIC_NOT_FROM_DATA
+ /**< grouping implemented by SW, extraction from parser result
+ * or direct use of default value
+ */
+} ioc_fm_pcd_kg_known_fields_dflt_types;
+
+/*
+ * @Description Enumeration type for defining header index for scenarios with
+ * multiple (tunneled) headers
+ */
+typedef enum ioc_fm_pcd_hdr_index {
+ e_IOC_FM_PCD_HDR_INDEX_NONE = 0,
+ /**< used when multiple headers not used, also
+ * to specify regular IP (not tunneled).
+ */
+ e_IOC_FM_PCD_HDR_INDEX_1,/**< may be used for VLAN, MPLS, tunneled IP */
+ e_IOC_FM_PCD_HDR_INDEX_2,/**< may be used for MPLS, tunneled IP */
+ e_IOC_FM_PCD_HDR_INDEX_3,/**< may be used for MPLS */
+ e_IOC_FM_PCD_HDR_INDEX_LAST = 0xFF /**< may be used for VLAN, MPLS */
+} ioc_fm_pcd_hdr_index;
+
+/*
+ * @Description Enumeration type for selecting the policer profile functional
+ * type
+ */
+typedef enum ioc_fm_pcd_profile_type_selection {
+ e_IOC_FM_PCD_PLCR_PORT_PRIVATE, /**< Port dedicated profile */
+ e_IOC_FM_PCD_PLCR_SHARED
+ /**< Shared profile (shared within partition) */
+} ioc_fm_pcd_profile_type_selection;
+
+/*
+ * @Description Enumeration type for selecting the policer profile algorithm
+ */
+typedef enum ioc_fm_pcd_plcr_algorithm_selection {
+ e_IOC_FM_PCD_PLCR_PASS_THROUGH, /**< Policer pass through */
+ e_IOC_FM_PCD_PLCR_RFC_2698, /**< Policer algorithm RFC 2698 */
+ e_IOC_FM_PCD_PLCR_RFC_4115 /**< Policer algorithm RFC 4115 */
+} ioc_fm_pcd_plcr_algorithm_selection;
+
+/*
+ * @Description Enumeration type for selecting a policer profile color mode
+ */
+typedef enum ioc_fm_pcd_plcr_color_mode {
+ e_IOC_FM_PCD_PLCR_COLOR_BLIND, /**< Color blind */
+ e_IOC_FM_PCD_PLCR_COLOR_AWARE /**< Color aware */
+} ioc_fm_pcd_plcr_color_mode;
+
+/*
+ * @Description Enumeration type for selecting a policer profile color
+ */
+typedef enum ioc_fm_pcd_plcr_color {
+ e_IOC_FM_PCD_PLCR_GREEN, /**< Green */
+ e_IOC_FM_PCD_PLCR_YELLOW, /**< Yellow */
+ e_IOC_FM_PCD_PLCR_RED, /**< Red */
+ e_IOC_FM_PCD_PLCR_OVERRIDE /**< Color override */
+} ioc_fm_pcd_plcr_color;
+
+/*
+ * @Description Enumeration type for selecting the policer profile packet
+ * frame length selector
+ */
+typedef enum ioc_fm_pcd_plcr_frame_length_select {
+ e_IOC_FM_PCD_PLCR_L2_FRM_LEN, /**< L2 frame length */
+ e_IOC_FM_PCD_PLCR_L3_FRM_LEN, /**< L3 frame length */
+ e_IOC_FM_PCD_PLCR_L4_FRM_LEN, /**< L4 frame length */
+ e_IOC_FM_PCD_PLCR_FULL_FRM_LEN /**< Full frame length */
+} ioc_fm_pcd_plcr_frame_length_select;
+
+/*
+ * @Description Enumeration type for selecting roll-back frame
+ */
+typedef enum ioc_fm_pcd_plcr_roll_back_frame_select {
+ e_IOC_FM_PCD_PLCR_ROLLBACK_L2_FRM_LEN, /**< Rollback L2 frame length */
+ e_IOC_FM_PCD_PLCR_ROLLBACK_FULL_FRM_LEN
+ /**< Rollback Full frame length */
+} ioc_fm_pcd_plcr_roll_back_frame_select;
+
+/*
+ * @Description Enumeration type for selecting the policer profile packet or
+ * byte mode
+ */
+typedef enum ioc_fm_pcd_plcr_rate_mode {
+ e_IOC_FM_PCD_PLCR_BYTE_MODE, /**< Byte mode */
+ e_IOC_FM_PCD_PLCR_PACKET_MODE /**< Packet mode */
+} ioc_fm_pcd_plcr_rate_mode;
+
+/*
+ * @Description Enumeration type for defining action of frame
+ */
+typedef enum ioc_fm_pcd_done_action {
+ e_IOC_FM_PCD_ENQ_FRAME = 0, /**< Enqueue frame */
+ e_IOC_FM_PCD_DROP_FRAME /**< Drop frame */
+} ioc_fm_pcd_done_action;
+
+/*
+ * @Description Enumeration type for selecting the policer counter
+ */
+typedef enum ioc_fm_pcd_plcr_profile_counters {
+ e_IOC_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER,
+ /**< Green packets counter */
+ e_IOC_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER,
+ /**< Yellow packets counter */
+ e_IOC_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER,
+ /**< Red packets counter */
+ e_IOC_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER,
+ /**< Recolored yellow packets counter */
+ e_IOC_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER
+ /**< Recolored red packets counter */
+} ioc_fm_pcd_plcr_profile_counters;
+
+/*
+ * @Description Enumeration type for selecting the PCD action after extraction
+ */
+typedef enum ioc_fm_pcd_action {
+ e_IOC_FM_PCD_ACTION_NONE, /**< NONE */
+ e_IOC_FM_PCD_ACTION_EXACT_MATCH,
+ /**< Exact match on the selected extraction */
+ e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP
+ /**< Indexed lookup on the selected extraction */
+} ioc_fm_pcd_action;
+
+/*
+ * @Description Enumeration type for selecting type of insert manipulation
+ */
+typedef enum ioc_fm_pcd_manip_hdr_insrt_type {
+ e_IOC_FM_PCD_MANIP_INSRT_GENERIC,
+ /**< Insert according to offset & size */
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR,
+ /**< Insert according to protocol */
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+ e_IOC_FM_PCD_MANIP_INSRT_BY_TEMPLATE
+ /**< Insert template to start of frame */
+#endif /* FM_CAPWAP_SUPPORT */
+} ioc_fm_pcd_manip_hdr_insrt_type;
+
+/*
+ * @Description Enumeration type for selecting type of remove manipulation
+ */
+typedef enum ioc_fm_pcd_manip_hdr_rmv_type {
+ e_IOC_FM_PCD_MANIP_RMV_GENERIC,
+ /**< Remove according to offset & size */
+ e_IOC_FM_PCD_MANIP_RMV_BY_HDR
+ /**< Remove according to offset & size */
+} ioc_fm_pcd_manip_hdr_rmv_type;
+
+/*
+ * @Description An enum for selecting specific L2 fields removal
+ */
+typedef enum ioc_fm_pcd_manip_hdr_rmv_specific_l2 {
+ e_IOC_FM_PCD_MANIP_HDR_RMV_ETHERNET, /**< Ethernet/802.3 MAC */
+ e_IOC_FM_PCD_MANIP_HDR_RMV_STACKED_QTAGS, /**< stacked QTags */
+ e_IOC_FM_PCD_MANIP_HDR_RMV_ETHERNET_AND_MPLS,
+ /**< MPLS and Ethernet/802.3 MAC header unitl the header
+ * which follows the MPLS header
+ */
+ e_IOC_FM_PCD_MANIP_HDR_RMV_MPLS
+ /**< Remove MPLS header (Unlimited MPLS labels) */
+} ioc_fm_pcd_manip_hdr_rmv_specific_l2;
+
+/*
+ * @Description Enumeration type for selecting specific fields updates
+ */
+typedef enum ioc_fm_pcd_manip_hdr_field_update_type {
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN, /**< VLAN updates */
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4, /**< IPV4 updates */
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6, /**< IPV6 updates */
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP, /**< TCP_UDP updates */
+} ioc_fm_pcd_manip_hdr_field_update_type;
+
+/*
+ * @Description Enumeration type for selecting VLAN updates
+ */
+typedef enum ioc_fm_pcd_manip_hdr_field_update_vlan {
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_VPRI,
+ /**< Replace VPri of outer most VLAN tag. */
+ e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN
+ /**< DSCP to VLAN priority bits translation */
+} ioc_fm_pcd_manip_hdr_field_update_vlan;
+
+/*
+ * @Description Enumeration type for selecting specific L2 fields removal
+ */
+typedef enum ioc_fm_pcd_manip_hdr_insrt_specific_l2 {
+ e_IOC_FM_PCD_MANIP_HDR_INSRT_MPLS
+ /**< Insert MPLS header (Unlimited MPLS labels) */
+} ioc_fm_pcd_manip_hdr_insrt_specific_l2;
+
+#if (DPAA_VERSION >= 11)
+/*
+ * @Description Enumeration type for selecting QoS mapping mode
+ *
+ * Note: In all cases except
+ * 'e_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE' User should instruct the
+ * port to read the parser-result
+ */
+typedef enum ioc_fm_pcd_manip_hdr_qos_mapping_mode {
+ e_IOC_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE = 0,
+ /**< No mapping, QoS field will not be changed */
+ e_IOC_FM_PCD_MANIP_HDR_QOS_MAPPING_AS_IS,
+ /**< QoS field will be overwritten by the last byte in
+ * the parser-result.
+ */
+} ioc_fm_pcd_manip_hdr_qos_mapping_mode;
+
+/*
+ * @Description Enumeration type for selecting QoS source
+ *
+ * Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_SRC_NONE'
+ * User should left room for the parser-result on input/output
+ * buffer and instruct the port to read/write the parser-result
+ * to the buffer (RPD should be set)
+ */
+typedef enum ioc_fm_pcd_manip_hdr_qos_src {
+ e_IOC_FM_PCD_MANIP_HDR_QOS_SRC_NONE = 0,
+ /**< TODO */
+ e_IOC_FM_PCD_MANIP_HDR_QOS_SRC_USER_DEFINED,
+ /**< QoS will be taken from the last byte in the
+ * parser-result.
+ */
+} ioc_fm_pcd_manip_hdr_qos_src;
+#endif /* (DPAA_VERSION >= 11) */
+
+/*
+ * @Description Enumeration type for selecting type of header insertion
+ */
+typedef enum ioc_fm_pcd_manip_hdr_insrt_by_hdr_type {
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2,
+ /**< Specific L2 fields insertion */
+#if (DPAA_VERSION >= 11)
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_IP, /**< IP insertion */
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_UDP, /**< UDP insertion */
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE,
+ /**< UDP lite insertion */
+ e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP /**< CAPWAP insertion */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_manip_hdr_insrt_by_hdr_type;
+
+/*
+ * @Description Enumeration type for selecting specific custom command
+ */
+typedef enum ioc_fm_pcd_manip_hdr_custom_type {
+ e_IOC_FM_PCD_MANIP_HDR_CUSTOM_IP_REPLACE,
+ /**< Replace IPv4/IPv6 */
+ e_IOC_FM_PCD_MANIP_HDR_CUSTOM_GEN_FIELD_REPLACE,
+} ioc_fm_pcd_manip_hdr_custom_type;
+
+/*
+ * @Description Enumeration type for selecting specific custom command
+ */
+typedef enum ioc_fm_pcd_manip_hdr_custom_ip_replace {
+ e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV4_BY_IPV6,
+ /**< Replace IPv4 by IPv6 */
+ e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4
+ /**< Replace IPv6 by IPv4 */
+} ioc_fm_pcd_manip_hdr_custom_ip_replace;
+
+/*
+ * @Description Enumeration type for selecting type of header removal
+ */
+typedef enum ioc_fm_pcd_manip_hdr_rmv_by_hdr_type {
+ e_IOC_FM_PCD_MANIP_RMV_BY_HDR_SPECIFIC_L2 = 0,
+ /**< Specific L2 fields removal */
+#if (DPAA_VERSION >= 11)
+ e_IOC_FM_PCD_MANIP_RMV_BY_HDR_CAPWAP, /**< CAPWAP removal */
+#endif /* (DPAA_VERSION >= 11) */
+#if (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+ e_IOC_FM_PCD_MANIP_RMV_BY_HDR_FROM_START,
+ /**< Locate from data that is not the header */
+#endif /* (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) &&
+ * defined(FM_CAPWAP_SUPPORT))
+ */
+} ioc_fm_pcd_manip_hdr_rmv_by_hdr_type;
+
+/*
+ * @Description Enumeration type for selecting type of timeout mode
+ */
+typedef enum ioc_fm_pcd_manip_reassem_time_out_mode {
+ e_IOC_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAMES,
+ /**< Limits the time of the reassembly
+ * process from the first fragment to
+ * the last
+ */
+ e_IOC_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAG
+ /**< Limits the time of receiving the
+ * fragment
+ */
+} ioc_fm_pcd_manip_reassem_time_out_mode;
+
+/*
+ * @Description Enumeration type for selecting type of WaysNumber mode
+ */
+typedef enum ioc_fm_pcd_manip_reassem_ways_number {
+ e_IOC_FM_PCD_MANIP_ONE_WAY_HASH = 1, /**< One way hash */
+ e_IOC_FM_PCD_MANIP_TWO_WAYS_HASH, /**< Two ways hash */
+ e_IOC_FM_PCD_MANIP_THREE_WAYS_HASH, /**< Three ways hash */
+ e_IOC_FM_PCD_MANIP_FOUR_WAYS_HASH, /**< Four ways hash */
+ e_IOC_FM_PCD_MANIP_FIVE_WAYS_HASH, /**< Five ways hash */
+ e_IOC_FM_PCD_MANIP_SIX_WAYS_HASH, /**< Six ways hash */
+ e_IOC_FM_PCD_MANIP_SEVEN_WAYS_HASH, /**< Seven ways hash */
+ e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH /**< Eight ways hash */
+} ioc_fm_pcd_manip_reassem_ways_number;
+
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+/*
+ * @Description Enumeration type for selecting type of statistics mode
+ */
+typedef enum ioc_fm_pcd_stats {
+ e_IOC_FM_PCD_STATS_PER_FLOWID = 0
+ /**< Flow ID is used as index for getting statistics */
+} ioc_fm_pcd_stats;
+#endif
+
+/*
+ * @Description Enumeration type for selecting manipulation type
+ */
+typedef enum ioc_fm_pcd_manip_type {
+ e_IOC_FM_PCD_MANIP_HDR = 0, /**< Header manipulation */
+ e_IOC_FM_PCD_MANIP_REASSEM, /**< Reassembly */
+ e_IOC_FM_PCD_MANIP_FRAG, /**< Fragmentation */
+ e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD /**< Special Offloading */
+} ioc_fm_pcd_manip_type;
+
+/*
+ * @Description Enumeration type for selecting type of statistics mode
+ */
+typedef enum ioc_fm_pcd_cc_stats_mode {
+ e_IOC_FM_PCD_CC_STATS_MODE_NONE = 0, /**< No statistics support */
+ e_IOC_FM_PCD_CC_STATS_MODE_FRAME, /**< Frame count statistics */
+ e_IOC_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME,
+ /**< Byte and frame count statistics */
+#if (DPAA_VERSION >= 11)
+ e_IOC_FM_PCD_CC_STATS_MODE_RMON,
+ /**< Byte and frame length range count statistics */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_cc_stats_mode;
+
+/*
+ * @Description Enumeration type for determining the action in case an IP
+ * packet is larger than MTU but its DF (Don't Fragment) bit is
+ * set.
+ */
+typedef enum ioc_fm_pcd_manip_dont_frag_action {
+ e_IOC_FM_PCD_MANIP_DISCARD_PACKET = 0, /**< Discard packet */
+ e_IOC_FM_PCD_MANIP_ENQ_TO_ERR_Q_OR_DISCARD_PACKET =
+ e_IOC_FM_PCD_MANIP_DISCARD_PACKET,
+ /**< Obsolete, cannot enqueue to error queue; In
+ * practice, selects to discard packets; Will be
+ * removed in the future
+ */
+ e_IOC_FM_PCD_MANIP_FRAGMENT_PACKECT,
+ /**< Fragment packet and continue normal
+ * processing
+ */
+ e_IOC_FM_PCD_MANIP_CONTINUE_WITHOUT_FRAG
+ /**< Continue normal processing without
+ * fragmenting the packet
+ */
+} ioc_fm_pcd_manip_dont_frag_action;
+
+/*
+ * @Description Enumeration type for selecting type of special offload
+ * manipulation
+ */
+typedef enum ioc_fm_pcd_manip_special_offload_type {
+ e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC,
+ /**< IPSec offload manipulation */
+#if (DPAA_VERSION >= 11)
+ e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP
+ /**< CAPWAP offload manipulation */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_manip_special_offload_type;
+
+/*
+ * @Description A union of protocol dependent special options
+ * (Must match union u_FmPcdHdrProtocolOpt defined in
+ * fm_pcd_ext.h)
+ */
+typedef union ioc_fm_pcd_hdr_protocol_opt_u {
+ ioc_eth_protocol_opt_t eth_opt; /**< Ethernet options */
+ ioc_vlan_protocol_opt_t vlan_opt; /**< Vlan options */
+ ioc_mpls_protocol_opt_t mpls_opt; /**< MPLS options */
+ ioc_ipv4_protocol_opt_t ipv4_opt; /**< IPv4 options */
+ ioc_ipv6_protocol_opt_t ipv6_opt; /**< IPv6 options */
+#if (DPAA_VERSION >= 11)
+ ioc_capwap_protocol_opt_t capwap_opt; /**< CAPWAP options */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_hdr_protocol_opt_u;
+
+/*
+ * @Description A union holding all known protocol fields
+ */
+typedef union ioc_fm_pcd_fields_u {
+ ioc_header_field_eth_t eth; /**< Ethernet*/
+ ioc_header_field_vlan_t vlan; /**< VLAN*/
+ ioc_header_field_llc_snap_t llc_snap; /**< LLC SNAP*/
+ ioc_header_field_pppoe_t pppoe; /**< PPPoE*/
+ ioc_header_field_mpls_t mpls; /**< MPLS*/
+ ioc_header_field_ip_t ip; /**< IP */
+ ioc_header_field_ipv4_t ipv4; /**< IPv4*/
+ ioc_header_field_ipv6_t ipv6; /**< IPv6*/
+ ioc_header_field_udp_t udp; /**< UDP */
+ ioc_header_field_udp_lite_t udp_lite; /**< UDP_Lite*/
+ ioc_header_field_tcp_t tcp; /**< TCP */
+ ioc_header_field_sctp_t sctp; /**< SCTP*/
+ ioc_header_field_dccp_t dccp; /**< DCCP*/
+ ioc_header_field_gre_t gre; /**< GRE */
+ ioc_header_field_minencap_t minencap;/**< Minimal Encapsulation */
+ ioc_header_field_ipsec_ah_t ipsec_ah; /**< IPSec AH*/
+ ioc_header_field_ipsec_esp_t ipsec_esp; /**< IPSec ESP*/
+ ioc_header_field_udp_encap_esp_t udp_encap_esp;
+ /**< UDP Encapsulation ESP */
+} ioc_fm_pcd_fields_u;
+
+/*
+ * @Description Parameters for defining header extraction for key generation
+ */
+typedef struct ioc_fm_pcd_from_hdr_t {
+ uint8_t size; /**< Size in byte */
+ uint8_t offset; /**< Byte offset */
+} ioc_fm_pcd_from_hdr_t;
+
+/*
+ * @Description Parameters for defining field extraction for key generation
+ */
+typedef struct ioc_fm_pcd_from_field_t {
+ ioc_fm_pcd_fields_u field; /**< Field selection */
+ uint8_t size; /**< Size in byte */
+ uint8_t offset; /**< Byte offset */
+} ioc_fm_pcd_from_field_t;
+
+/*
+ * @Description Parameters for defining a single network environment unit
+ * A distinction unit should be defined if it will later be used
+ * by one or more PCD engines to distinguish between flows.
+ * (Must match struct t_FmPcdDistinctionUnit defined in
+ * fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_distinction_unit_t {
+ struct {
+ ioc_net_header_type hdr;
+ /**< One of the headers supported by the FM */
+ ioc_fm_pcd_hdr_protocol_opt_u opt; /**< Select only one option! */
+ } hdrs[IOC_FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS];
+} ioc_fm_pcd_distinction_unit_t;
+
+/*
+ * @Description Parameters for defining all different distinction units
+ * supported by a specific PCD Network Environment
+ * Characteristics module.
+ *
+ * Each unit represent a protocol or a group of protocols that
+ * may be used later by the different PCD engines to distinguish
+ * between flows.
+ * (Must match struct t_FmPcdNetEnvParams defined in
+ * fm_pcd_ext.h)
+ */
+struct fm_pcd_net_env_params_t {
+ uint8_t num_of_distinction_units;
+ /**< Number of different units to be identified */
+ ioc_fm_pcd_distinction_unit_t
+ units[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
+ /**< An array of num_of_distinction_units of the different units to be
+ * identified
+ */
+};
+
+typedef struct ioc_fm_pcd_net_env_params_t {
+ struct fm_pcd_net_env_params_t param;
+ void *id;
+ /**< Output parameter; Returns the net-env Id to be used */
+} ioc_fm_pcd_net_env_params_t;
+
+/*
+ * @Description Parameters for defining a single extraction action when
+ * creating a key
+ */
+typedef struct ioc_fm_pcd_extract_entry_t {
+ ioc_fm_pcd_extract_type type; /**< Extraction type select */
+ union {
+ struct {
+ ioc_net_header_type hdr; /**< Header selection */
+ bool ignore_protocol_validation;
+ /**< Ignore protocol validation */
+ ioc_fm_pcd_hdr_index hdr_index;
+ /**< Relevant only for MPLS, VLAN and
+ * tunneled IP. Otherwise should be
+ * cleared.
+ */
+ ioc_fm_pcd_extract_by_hdr_type type;
+ /**< Header extraction type select */
+ union {
+ ioc_fm_pcd_from_hdr_t from_hdr;
+ /**< Extract bytes from header
+ * parameters
+ */
+ ioc_fm_pcd_from_field_t from_field;
+ /**< Extract bytes from field parameters
+ */
+ ioc_fm_pcd_fields_u full_field;
+ /**< Extract full field parameters */
+ } extract_by_hdr_type;
+ } extract_by_hdr;/**< Used when type = e_IOC_FM_PCD_KG_EXTRACT_BY_HDR */
+ struct {
+ ioc_fm_pcd_extract_from src;
+ /**< Non-header extraction source */
+ ioc_fm_pcd_action action; /**< Relevant for CC Only */
+ uint16_t ic_indx_mask;
+ /**< Relevant only for CC whenaction =
+ * e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP; Note that
+ * the number of bits that are set within this
+ * mask must be log2 of the CC-node
+ * 'num_of_keys'. Note that the mask cannot be
+ * set on the lower bits.
+ */
+ uint8_t offset; /**< Byte offset */
+ uint8_t size; /**< Size in bytes */
+ } extract_non_hdr;
+ /**< Used when type = e_IOC_FM_PCD_KG_EXTRACT_NON_HDR */
+ } extract_params;
+} ioc_fm_pcd_extract_entry_t;
+
+/*
+ * @Description A structure for defining masks for each extracted
+ * field in the key.
+ */
+typedef struct ioc_fm_pcd_kg_extract_mask_t {
+ uint8_t extract_array_index;
+ /**< Index in the extraction array, as
+ * initialized by user
+ */
+ uint8_t offset; /**< Byte offset */
+ uint8_t mask;
+ /**< A byte mask (selected bits will be ignored) */
+} ioc_fm_pcd_kg_extract_mask_t;
+
+/*
+ * @Description A structure for defining default selection per groups of
+ * fields
+ */
+typedef struct ioc_fm_pcd_kg_extract_dflt_t {
+ ioc_fm_pcd_kg_known_fields_dflt_types type;
+ /**< Default type select */
+ ioc_fm_pcd_kg_extract_dflt_select dflt_select;
+ /**< Default register select */
+} ioc_fm_pcd_kg_extract_dflt_t;
+
+
+/*
+ * @Description A structure for defining all parameters needed for
+ * generation a key and using a hash function
+ */
+typedef struct ioc_fm_pcd_kg_key_extract_and_hash_params_t {
+ uint32_t private_dflt0;
+ /**< Scheme default register 0 */
+ uint32_t private_dflt1;
+ /**< Scheme default register 1 */
+ uint8_t num_of_used_extracts;
+ /**< defines the valid size of the
+ * following array
+ */
+ ioc_fm_pcd_extract_entry_t
+ extract_array[IOC_FM_PCD_KG_MAX_EXTRACTS_PER_KEY];
+ /**< An array of extraction definitions.
+ */
+ uint8_t num_of_used_dflts;
+ /**< defines the valid size of the
+ * following array
+ */
+ ioc_fm_pcd_kg_extract_dflt_t
+ dflts[IOC_FM_PCD_KG_NUM_OF_DEFAULT_GROUPS];
+ /**< For each extraction used in this
+ * scheme, specify the required default
+ * register to be used when header is
+ * not found. types not specified in
+ * this array will get undefined value.
+ */
+ uint8_t num_of_used_masks;
+ /**< Defines the valid size of the
+ * following array
+ */
+ ioc_fm_pcd_kg_extract_mask_t
+ masks[IOC_FM_PCD_KG_NUM_OF_EXTRACT_MASKS];
+ uint8_t hash_shift;
+ /**< Hash result right shift. Selects
+ * the 24 bits out of the 64 hash
+ * result. 0 means using the 24 LSB's,
+ * otherwise use the 24 LSB's after
+ * shifting right.
+ */
+ uint32_t hash_dist_num_of_fqids;
+ /**< must be > 1 and a power of 2.
+ * Represents the range of queues for
+ * the key and hash functionality
+ */
+ uint8_t hash_distribution_fqids_shift;
+ /**< selects the FQID bits that will be
+ * effected by the hash
+ */
+ bool symmetric_hash;
+ /**< TRUE to generate the same hash for
+ * frames with swapped source and
+ * destination fields on all layers; If
+ * TRUE, driver will check that for all
+ * layers, if SRC extraction is
+ * selected, DST extraction must also be
+ * selected, and vice versa.
+ */
+} ioc_fm_pcd_kg_key_extract_and_hash_params_t;
+
+/*
+ * @Description A structure of parameters for defining a single Qid mask
+ * (extracted OR).
+ */
+typedef struct ioc_fm_pcd_kg_extracted_or_params_t {
+ ioc_fm_pcd_extract_type type;
+ /**< Extraction type select */
+ union {
+ struct {
+ /**< used when type = e_IOC_FM_PCD_KG_EXTRACT_BY_HDR */
+ ioc_net_header_type hdr;
+ ioc_fm_pcd_hdr_index hdr_index;
+ /**< Relevant only for MPLS,
+ * VLAN and tunneled IP.
+ * Otherwise should be cleared.
+ */
+ bool ignore_protocol_validation;
+
+ } extract_by_hdr;
+ ioc_fm_pcd_extract_from src;
+ /**< used when type =
+ * e_IOC_FM_PCD_KG_EXTRACT_NON_HDR
+ */
+ } extract_params;
+ uint8_t extraction_offset;
+ /**< Offset for extraction */
+ ioc_fm_pcd_kg_extract_dflt_select dflt_value;
+ /**< Select register from which
+ * extraction is taken if field not
+ * found
+ */
+ uint8_t mask;
+ /**< Mask LSB byte of extraction
+ * (specified bits are ignored)
+ */
+
+ uint8_t bit_offset_in_fqid;
+ /**< 0-31, Selects which bits of the 24 FQID bits to effect
+ * using the extracted byte; Assume byte is placed as the 8
+ * MSB's in a 32 bit word where the lower bits are the FQID; i.e
+ * if bitOffsetInFqid=1 than its LSB will effect the FQID MSB,
+ * if bitOffsetInFqid=24 than the extracted byte will effect the
+ * 8 LSB's of the FQID, if bitOffsetInFqid=31 than the byte's
+ * MSB will effect the FQID's LSB; 0 means - no effect on FQID;
+ * Note that one, and only one of bitOffsetInFqid or
+ * bitOffsetInPlcrProfile must be set (i.e, extracted byte must
+ * effect either FQID or Policer profile).
+ */
+ uint8_t bit_offset_in_plcr_profile;
+ /**< 0-15, Selects which bits of the 8 policer profile id bits
+ * to effect using the extracted byte; Assume byte is placed as
+ * the 8 MSB's in a 16 bit word where the lower bits are the
+ * policer profile id; i.e if bitOffsetInPlcrProfile=1 than its
+ * LSB will effect the profile MSB, if bitOffsetInFqid=8 than
+ * the extracted byte will effect the whole policer profile id,
+ * if bitOffsetInFqid=15 than the byte's MSB will effect the
+ * Policer Profile id's LSB; 0 means - no effect on policer
+ * profile; Note that one, and only one of bitOffsetInFqid or
+ * bitOffsetInPlcrProfile must be set (i.e, extracted byte must
+ * effect either FQID or Policer profile).
+ */
+} ioc_fm_pcd_kg_extracted_or_params_t;
+
+/*
+ * @Description A structure for configuring scheme counter
+ */
+typedef struct ioc_fm_pcd_kg_scheme_counter_t {
+ bool update;
+ /**< FALSE to keep the current counter state and
+ * continue from that point, TRUE to update/reset the
+ * counter when the scheme is written.
+ */
+ uint32_t value;
+ /**< If update=TRUE, this value will be written into the
+ * counter; clear this field to reset the counter.
+ */
+} ioc_fm_pcd_kg_scheme_counter_t;
+
+
+/*
+ * @Description A structure for retrieving FMKG_SE_SPC
+ */
+typedef struct ioc_fm_pcd_kg_scheme_spc_t {
+ uint32_t val; /**< return value */
+ void *id; /**< scheme handle */
+} ioc_fm_pcd_kg_scheme_spc_t;
+
+/*
+ * @Description A structure for defining policer profile parameters as
+ * required by keygen (when policer is the next engine after this
+ * scheme).
+ * (Must match struct t_FmPcdKgPlcrProfile defined in
+ * fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_kg_plcr_profile_t {
+ bool shared_profile;
+ /**< TRUE if this profile is shared between ports (i.e.
+ * managed by master partition) May not be TRUE if
+ * profile is after Coarse Classification
+ */
+ bool direct;
+ /**< If TRUE, direct_relative_profile_id only selects
+ * the profile id, if FALSE
+ * fqid_offset_relative_profile_id_base is used together
+ * with fqid_offset_shift and num_of_profiles
+ * parameters, to define a range of profiles from which
+ * the KeyGen result will determine the destination
+ * policer profile.
+ */
+ union {
+ uint16_t direct_relative_profile_id;
+ /**< Used if 'direct' is TRUE, to select policer
+ * profile. This parameter should indicate the policer
+ * profile offset within the port's policer profiles or
+ * SHARED window.
+ */
+ struct {
+ uint8_t fqid_offset_shift;
+ /**< Shift of KG results without the qid base */
+ uint8_t fqid_offset_relative_profile_id_base;
+ /**< OR of KG results without the qid base This
+ * parameter should indicate the policer profile offset
+ * within the port's policer profiles window or SHARED
+ * window depends on shared_profile
+ */
+ uint8_t num_of_profiles;
+ /**< Range of profiles starting at base */
+ } indirect_profile; /**< Indirect profile parameters */
+ } profile_select;
+ /**< Direct/indirect profile selection and parameters */
+} ioc_fm_pcd_kg_plcr_profile_t;
+
+#if DPAA_VERSION >= 11
+/*
+ * @Description Parameters for configuring a storage profile for a KeyGen
+ * scheme.
+ */
+typedef struct ioc_fm_pcd_kg_storage_profile_t {
+ bool direct;
+ /**< If TRUE, directRelativeProfileId only selects the profile
+ * id; If FALSE, fqidOffsetRelativeProfileIdBase is used
+ * together with fqidOffsetShift and num_of_profiles parameters
+ * to define a range of profiles from which the KeyGen result
+ * will determine the destination storage profile.
+ */
+ union {
+ uint16_t direct_relative_profile_id;
+ /**< Used when 'direct' is TRUE, to select a storage profile;
+ * should indicate the storage profile offset within the port's
+ * storage profiles window.
+ */
+ struct {
+ uint8_t fqid_offset_shift;
+ /**< Shift of KeyGen results without the FQID base */
+ uint8_t fqid_offset_relative_profile_id_base;
+ /**< OR of KeyGen results without the FQID base; should
+ * indicate the policer profile offset within the port's
+ * storage profiles window.
+ */
+ uint8_t num_of_profiles;
+ /**< Range of profiles starting at base. */
+ } indirect_profile;
+ /**< Indirect profile parameters. */
+ } profile_select;
+ /**< Direct/indirect profile selection and parameters. */
+} ioc_fm_pcd_kg_storage_profile_t;
+#endif /* DPAA_VERSION >= 11 */
+
+/*
+ * @Description Parameters for defining CC as the next engine after KeyGen
+ * (Must match struct t_FmPcdKgCc defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_kg_cc_t {
+ void *tree_id;
+ /**< CC Tree id */
+ uint8_t grp_id;
+ /**< CC group id within the CC tree */
+ bool plcr_next;
+ /**< TRUE if after CC, in case of data
+ * frame, policing is required.
+ */
+ bool bypass_plcr_profile_generation;
+ /**< TRUE to bypass KeyGen policer
+ * profile generation; selected profile
+ * is the one set at port initialization
+ */
+ ioc_fm_pcd_kg_plcr_profile_t plcr_profile;
+ /**< Valid only if plcr_next = TRUE and
+ * bypass_plcr_profile_generation =
+ * FALSE
+ */
+} ioc_fm_pcd_kg_cc_t;
+
+/*
+ * @Description Parameters for defining initializing a KeyGen scheme (Must
+ * match struct t_FmPcdKgSchemeParams defined in fm_pcd_ext.h)
+ */
+struct fm_pcd_kg_scheme_params_t {
+ bool modify; /**< TRUE to change an existing scheme */
+ union {
+ uint8_t relative_scheme_id;
+ /**< if modify=FALSE: partition-relative scheme id */
+ void *scheme_id;
+ /**< if modify=TRUE: the id of an existing scheme */
+ } scm_id;
+ bool always_direct;
+ /**< This scheme is reached only directly, i.e. no need for
+ * match vector; KeyGen will ignore it when matching
+ */
+ struct {
+ /**< HL relevant only if always_direct=FALSE */
+ void *net_env_id;
+ /**< The id of the Network Environment as returned
+ * by fm_pcd_net_env_characteristics_set()
+ */
+ uint8_t num_of_distinction_units;
+ /**< Number of NetEnv units listed in unit_ids array */
+ uint8_t unit_ids[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
+ /**< Indexes as passed to SetNetEnvCharacteristics (?) array */
+ } net_env_params;
+ bool use_hash;
+ /**< use the KG Hash functionality */
+ ioc_fm_pcd_kg_key_extract_and_hash_params_t key_ext_and_hash;
+ /**< used only if useHash = TRUE */
+ bool bypass_fqid_generation;
+ /**< Normally - FALSE, TRUE to avoid FQID update in the IC; In
+ * such a case FQID after KG will be the default FQID defined
+ * for the relevant port, or the FQID defined by CC in cases
+ * where CC was the previous engine.
+ */
+ uint32_t base_fqid;
+ /**< Base FQID; Relevant only if bypass_fqid_generation = FALSE;
+ * If hash is used and an even distribution is expected
+ * according to hash_dist_num_of_fqids, base_fqid must
+ * be aligned to hash_dist_num_of_fqids.
+ */
+ uint8_t num_of_used_extracted_ors;
+ /**< Number of FQID masks listed in extracted_ors array*/
+ ioc_fm_pcd_kg_extracted_or_params_t
+ extracted_ors[IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS];
+ /**< IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS registers are shared
+ * between qid_masks functionality and some of the extraction
+ * actions; Normally only some will be used for qid_mask. Driver
+ * will return error if resource is full at initialization time.
+ */
+#if DPAA_VERSION >= 11
+ bool override_storage_profile;
+ /**< TRUE if KeyGen override previously decided storage profile
+ */
+ ioc_fm_pcd_kg_storage_profile_t storage_profile;
+ /**< Used when override_storage_profile=TRUE */
+#endif /* DPAA_VERSION >= 11 */
+ ioc_fm_pcd_engine next_engine;
+ /**< may be BMI, PLCR or CC */
+ union {
+ /**< depends on nextEngine */
+ ioc_fm_pcd_done_action done_action;
+ /**< Used when next engine is BMI (done) */
+ ioc_fm_pcd_kg_plcr_profile_t plcr_profile;
+ /**< Used when next engine is PLCR */
+ ioc_fm_pcd_kg_cc_t cc;
+ /**< Used when next engine is CC */
+ } kg_next_engine_params;
+ ioc_fm_pcd_kg_scheme_counter_t scheme_counter;
+ /**< A structure of parameters for updating the scheme counter*/
+};
+
+typedef struct ioc_fm_pcd_kg_scheme_params_t {
+ struct fm_pcd_kg_scheme_params_t param;
+ void *id; /**< Returns the scheme Id to be used */
+} ioc_fm_pcd_kg_scheme_params_t;
+
+/*
+ * @Collection
+ */
+#if DPAA_VERSION >= 11
+#define IOC_FM_PCD_CC_STATS_MAX_FLR 10
+ /* Maximal supported number of frame length ranges */
+#define IOC_FM_PCD_CC_STATS_FLR_SIZE 2
+ /* Size in bytes of a frame length range limit */
+#endif /* DPAA_VERSION >= 11 */
+#define IOC_FM_PCD_CC_STATS_FLR_COUNT_SIZE 4
+ /* Size in bytes of a frame length range counter */
+/* @} */
+
+/*
+ * @Description Parameters for defining CC as the next engine after a CC node.
+ * (Must match struct t_FmPcdCcNextCcParams defined in
+ * fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_cc_params_t {
+ void *cc_node_id; /**< Id of the next CC node */
+} ioc_fm_pcd_cc_next_cc_params_t;
+
+#if DPAA_VERSION >= 11
+/*
+ * @Description A structure for defining Frame Replicator as the next engine
+ * after a CC node. (Must match struct t_FmPcdCcNextFrParams
+ * defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_fr_params_t {
+ void *frm_replic_id;
+ /**< The id of the next frame replicator group */
+} ioc_fm_pcd_cc_next_fr_params_t;
+#endif /* DPAA_VERSION >= 11 */
+
+/*
+ * @Description A structure for defining PLCR params when PLCR is the
+ * next engine after a CC node
+ * (Must match struct t_FmPcdCcNextPlcrParams defined in
+ * fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_plcr_params_t {
+ bool override_params;
+ /**< TRUE if CC override previously decided parameters*/
+ bool shared_profile;
+ /**< Relevant only if overrideParams=TRUE: TRUE if this profile
+ * is shared between ports
+ */
+ uint16_t new_relative_profile_id;
+ /**< Relevant only if overrideParams=TRUE: (otherwise profile id
+ * is taken from keygen); This parameter should indicate the
+ * policer profile offset within the port's policer profiles or
+ * from SHARED window.
+ */
+ uint32_t new_fqid;
+ /**< Relevant only if overrideParams=TRUE: FQID for enquing the
+ * frame; In earlier chips if policer next engine is KEYGEN,
+ * this parameter can be 0, because the KEYGEN always decides
+ * the enqueue FQID.
+ */
+#if DPAA_VERSION >= 11
+ uint8_t new_relative_storage_profile_id;
+ /**< Indicates the relative storage profile offset within the
+ * port's storage profiles window; Relevant only if the port was
+ * configured with VSP.
+ */
+#endif /* DPAA_VERSION >= 11 */
+} ioc_fm_pcd_cc_next_plcr_params_t;
+
+/*
+ * @Description A structure for defining enqueue params when BMI is the next
+ * engine after a CC node (Must match struct
+ * t_FmPcdCcNextEnqueueParams defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_enqueue_params_t {
+ ioc_fm_pcd_done_action action;
+ /**< Action - when next engine is BMI (done) */
+ bool override_fqid;
+ /**< TRUE if CC override previously decided fqid
+ * and vspid, relevant if action =
+ * e_IOC_FM_PCD_ENQ_FRAME
+ */
+ uint32_t new_fqid;
+ /**< Valid if overrideFqid=TRUE, FQID for
+ * enqueuing the frame (otherwise FQID is taken
+ * from KeyGen), relevant if action =
+ * e_IOC_FM_PCD_ENQ_FRAME
+ */
+#if DPAA_VERSION >= 11
+ uint8_t new_relative_storage_profile_id;
+ /**< Valid if override_fqid=TRUE, Indicates the relative
+ * virtual storage profile offset within the port's
+ * storage profiles window; Relevant only if the port
+ * was configured with VSP.
+ */
+#endif /* DPAA_VERSION >= 11 */
+
+} ioc_fm_pcd_cc_next_enqueue_params_t;
+
+/*
+ * @Description A structure for defining KG params when KG is the next engine
+ * after a CC node (Must match struct t_FmPcdCcNextKgParams
+ * defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_kg_params_t {
+ bool override_fqid;
+ /**< TRUE if CC override previously decided fqid and vspid,
+ * Note - this parameters are irrelevant for earlier chips
+ */
+ uint32_t new_fqid;
+ /**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame
+ * (otherwise FQID is taken from KeyGen),
+ * Note - this parameters are irrelevant for earlier chips
+ */
+#if DPAA_VERSION >= 11
+ uint8_t new_relative_storage_profile_id;
+ /**< Valid if override_fqid=TRUE, Indicates the relative virtual
+ * storage profile offset within the port's storage profiles
+ * window; Relevant only if the port was configured with VSP.
+ */
+#endif /* DPAA_VERSION >= 11 */
+ void *p_direct_scheme; /**< Direct scheme id to go to. */
+} ioc_fm_pcd_cc_next_kg_params_t;
+
+/*
+ * @Description Parameters for defining the next engine after a CC node.
+ * (Must match struct ioc_fm_pcd_cc_next_engine_params_t defined
+ * in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_engine_params_t {
+ ioc_fm_pcd_engine next_engine;
+ /**< User has to initialize parameters according
+ * to nextEngine definition
+ */
+ union {
+ ioc_fm_pcd_cc_next_cc_params_t cc_params;
+ /**< Parameters in case next engine is CC */
+ ioc_fm_pcd_cc_next_plcr_params_t plcr_params;
+ /**< Parameters in case next engine is PLCR */
+ ioc_fm_pcd_cc_next_enqueue_params_t enqueue_params;
+ /**< Parameters in case next engine is BMI */
+ ioc_fm_pcd_cc_next_kg_params_t kg_params;
+ /**< Parameters in case next engine is KG */
+#if DPAA_VERSION >= 11
+ ioc_fm_pcd_cc_next_fr_params_t fr_params;
+ /**< Parameters in case next engine is FR */
+#endif /* DPAA_VERSION >= 11 */
+ } params;
+ /**< Union used for all the next-engine parameters options */
+ void *manip_id;
+ /**< Handle to Manipulation object. Relevant if
+ * next engine is of type result
+ * (e_IOC_FM_PCD_PLCR, e_IOC_FM_PCD_KG,
+ * e_IOC_FM_PCD_DONE)
+ */
+ bool statistics_en;
+ /**< If TRUE, statistics counters are
+ * incremented for each frame passing through
+ * this Coarse Classification entry.
+ */
+} ioc_fm_pcd_cc_next_engine_params_t;
+
+/*
+ * @Description Parameters for defining a single CC key
+ */
+typedef struct ioc_fm_pcd_cc_key_params_t {
+ uint8_t *p_key;
+ /**< pointer to the key of the size defined in key_size
+ */
+ uint8_t *p_mask;
+ /**< pointer to the Mask per key of the size defined in
+ * key_size. p_key and p_mask (if defined) has to be of
+ * the same size defined in the key_size
+ */
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params;
+ /**< parameters for the next for the defined Key in
+ * p_key
+ */
+
+} ioc_fm_pcd_cc_key_params_t;
+
+/*
+ * @Description Parameters for defining CC keys parameters
+ * The driver supports two methods for CC node allocation:
+ * dynamic and static. Static mode was created in order to
+ * prevent runtime alloc/free of FMan memory (MURAM), which may
+ * cause fragmentation; in this mode, the driver automatically
+ * allocates the memory according to 'max_num_of_keys' parameter.
+ * The driver calculates the maximal memory size that may be used
+ * for this CC-Node taking into consideration 'mask_support' and
+ * 'statistics_mode' parameters. When 'action' =
+ * e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP in the extraction
+ * parameters of this node, 'max_num_of_keys' must be equal to
+ * 'num_of_keys'. In dynamic mode, 'max_num_of_keys' must be
+ * zero. At initialization, all required structures are allocated
+ * according to 'num_of_keys' parameter. During runtime
+ * modification, these structures are re-allocated according to
+ * the updated number of keys.
+ * Please note that 'action' and 'ic_indx_mask' mentioned in the
+ * specific parameter explanations are passed in the extraction
+ * parameters of the node (fields of
+ * extractccparams.extractnonhdr).
+ */
+typedef struct ioc_keys_params_t {
+ uint16_t max_num_of_keys;
+ /**< Maximum number of keys that will (ever) be used in
+ * this CC-Node; A value of zero may be used for dynamic
+ * memory allocation.
+ */
+ bool mask_support;
+ /**< This parameter is relevant only if a node is
+ * initialized with action =
+ * e_IOC_FM_PCD_ACTION_EXACT_MATCH and max_num_of_keys >
+ * 0; Should be TRUE to reserve table memory for key
+ * masks, even if initial keys do not contain masks, or
+ * if the node was initialized as 'empty' (without
+ * keys); this will allow user to add keys with masks at
+ * runtime.
+ */
+ ioc_fm_pcd_cc_stats_mode statistics_mode;
+ /**< Determines the supported statistics mode for all
+ * node's keys. To enable statistics gathering,
+ * statistics should be enabled per every key, using
+ * 'statistics_en' in next engine parameters structure
+ * of that key; If 'max_num_of_keys' is set, all
+ * required structures will be preallocated for all keys
+ */
+#if (DPAA_VERSION >= 11)
+ uint16_t frame_length_ranges[IOC_FM_PCD_CC_STATS_MAX_FLR];
+ /**< Relevant only for 'RMON' statistics mode (this feature is
+ * supported only on B4860 device); Holds a list of programmable
+ * thresholds. For each received frame, its length in bytes is
+ * examined against these range thresholds and the appropriate
+ * counter is incremented by 1. For example, to belong to range
+ * i, the following should hold: range i-1 threshold < frame
+ * length <= range i threshold Each range threshold must be
+ * larger then its preceding range threshold. Last range
+ * threshold must be 0xFFFF.
+ */
+#endif /* (DPAA_VERSION >= 11) */
+ uint16_t num_of_keys;
+ /**< Number of initial keys; Note that in case of 'action' =
+ * e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP, this field should be
+ * power-of-2 of the number of bits that are set in
+ * 'ic_indx_mask'.
+ */
+ uint8_t key_size;
+ /**< Size of key - for extraction of type FULL_FIELD, 'key_size'
+ * has to be the standard size of the selected key; For other
+ * extraction types, 'key_size' has to be as size of extraction;
+ * When 'action' = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP,
+ * 'key_size' must be 2.
+ */
+ ioc_fm_pcd_cc_key_params_t key_params[IOC_FM_PCD_MAX_NUM_OF_KEYS];
+ /**< An array with 'num_of_keys' entries, each entry specifies
+ * the corresponding key parameters; When 'action' =
+ * e_IOC_FM_PCD_ACTION_EXACT_MATCH, this value must not exceed
+ * 255 (IOC_FM_PCD_MAX_NUM_OF_KEYS-1) as the last entry is saved
+ * for the 'miss' entry.
+ */
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params_for_miss;
+ /**< Parameters for defining the next engine when a key is not
+ * matched; Not relevant if action =
+ * e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP.
+ */
+} ioc_keys_params_t;
+
+/*
+ * @Description Parameters for defining a CC node
+ */
+struct fm_pcd_cc_node_params_t {
+ ioc_fm_pcd_extract_entry_t extract_cc_params;
+ /**< Extraction parameters */
+ ioc_keys_params_t keys_params;
+ /**< Keys definition matching the selected extraction */
+};
+
+typedef struct ioc_fm_pcd_cc_node_params_t {
+ struct fm_pcd_cc_node_params_t param;
+ void *id;
+ /**< Output parameter; returns the CC node Id to be used */
+} ioc_fm_pcd_cc_node_params_t;
+
+/*
+ * @Description Parameters for defining a hash table
+ * (Must match struct ioc_fm_pcd_hash_table_params_t defined in
+ * fm_pcd_ext.h)
+ */
+struct fm_pcd_hash_table_params_t {
+ uint16_t max_num_of_keys;
+ /**< Maximum Number Of Keys that will (ever) be used in this
+ * Hash-table
+ */
+ ioc_fm_pcd_cc_stats_mode statistics_mode;
+ /**< If not e_IOC_FM_PCD_CC_STATS_MODE_NONE, the required
+ * structures for the requested statistics mode will be
+ * allocated according to max_num_of_keys.
+ */
+ uint8_t kg_hash_shift;
+ /**< KG-Hash-shift as it was configured in the KG-scheme that
+ * leads to this hash-table.
+ */
+ uint16_t hash_res_mask;
+ /**< Mask that will be used on the hash-result; The
+ * number-of-sets for this hash will be calculated as (2^(number
+ * of bits set in 'hash_res_mask')); The 4 lower bits must be
+ * cleared.
+ */
+ uint8_t hash_shift;
+ /**< Byte offset from the beginning of the KeyGen hash result to
+ * the 2-bytes to be used as hash index.
+ */
+ uint8_t match_key_size;
+ /**< Size of the exact match keys held by the hash buckets */
+
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params_for_miss;
+ /**< Parameters for defining the next engine when a key is not
+ * matched
+ */
+};
+
+typedef struct ioc_fm_pcd_hash_table_params_t {
+ struct fm_pcd_hash_table_params_t param;
+ void *id;
+} ioc_fm_pcd_hash_table_params_t;
+
+/*
+ * @Description A structure with the arguments for the
+ * fm_pcd_hash_table_add_key ioctl() call
+ */
+typedef struct ioc_fm_pcd_hash_table_add_key_params_t {
+ void *p_hash_tbl;
+ uint8_t key_size;
+ ioc_fm_pcd_cc_key_params_t key_params;
+} ioc_fm_pcd_hash_table_add_key_params_t;
+
+/*
+ * @Description Parameters for defining a CC tree group.
+ *
+ * This structure defines a CC group in terms of NetEnv units and
+ * the action to be taken in each case. The unit_ids list must be
+ * given in order from low to high indices.
+ * ioc_fm_pcd_cc_next_engine_params_t is a list of
+ * 2^num_of_distinction_units structures where each defines the
+ * next action to be taken for each units combination. for
+ * example: num_of_distinction_units = 2 unit_ids = {1,3}
+ * next_engine_per_entries_in_grp[0] =
+ * ioc_fm_pcd_cc_next_engine_params_t for the case that unit 1 -
+ * not found; unit 3 - not found;
+ * next_engine_per_entries_in_grp[1] =
+ * ioc_fm_pcd_cc_next_engine_params_t for the case that unit 1 -
+ * not found; unit 3 - found;
+ * next_engine_per_entries_in_grp[2] =
+ * ioc_fm_pcd_cc_next_engine_params_t for the case that unit 1 -
+ * found; unit 3 - not found;
+ * next_engine_per_entries_in_grp[3] =
+ * ioc_fm_pcd_cc_next_engine_params_t for the case that unit 1 -
+ * found; unit 3 - found;
+ */
+typedef struct ioc_fm_pcd_cc_grp_params_t {
+ uint8_t num_of_distinction_units; /**< Up to 4 */
+ uint8_t unit_ids[IOC_FM_PCD_MAX_NUM_OF_CC_UNITS];
+ /**< Indexes of the units as defined in
+ * fm_pcd_net_env_characteristics_set()
+ */
+ ioc_fm_pcd_cc_next_engine_params_t
+ next_engine_per_entries_in_grp[IOC_FM_PCD_MAX_CC_ENTRY_IN_GRP];
+ /**< Maximum entries per group is 16 */
+} ioc_fm_pcd_cc_grp_params_t;
+
+/*
+ * @Description Parameters for defining the CC tree groups
+ * (Must match struct ioc_fm_pcd_cc_tree_params_t defined in
+ * fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_tree_params_t {
+ void *net_env_id;
+ /**< Id of the Network Environment as returned
+ * by fm_pcd_net_env_characteristics_set()
+ */
+ uint8_t num_of_groups;
+ /**< Number of CC groups within the CC tree */
+ ioc_fm_pcd_cc_grp_params_t
+ fm_pcd_cc_group_params[IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS];
+ /**< Parameters for each group. */
+ void *id;
+ /**< Output parameter; Returns the tree Id to be used */
+} ioc_fm_pcd_cc_tree_params_t;
+
+/*
+ * @Description Parameters for defining policer byte rate
+ */
+typedef struct ioc_fm_pcd_plcr_byte_rate_mode_param_t {
+ ioc_fm_pcd_plcr_frame_length_select frame_length_selection;
+ /**< Frame length selection */
+ ioc_fm_pcd_plcr_roll_back_frame_select roll_back_frame_selection;
+ /**< relevant option only e_IOC_FM_PCD_PLCR_L2_FRM_LEN,
+ * e_IOC_FM_PCD_PLCR_FULL_FRM_LEN
+ */
+} ioc_fm_pcd_plcr_byte_rate_mode_param_t;
+
+/*
+ * @Description Parameters for defining the policer profile (based on
+ * RFC-2698 or RFC-4115 attributes).
+ */
+typedef struct ioc_fm_pcd_plcr_non_passthrough_alg_param_t {
+ ioc_fm_pcd_plcr_rate_mode rate_mode;
+ /**< Byte / Packet */
+ ioc_fm_pcd_plcr_byte_rate_mode_param_t byte_mode_param;
+ /**< Valid for Byte NULL for Packet */
+ uint32_t committed_info_rate;
+ /**< KBits/Sec or Packets/Sec */
+ uint32_t committed_burst_size;
+ /**< KBits or Packets */
+ uint32_t peak_or_excess_info_rate;
+ /**< KBits/Sec or Packets/Sec */
+ uint32_t peak_or_excess_burst_size;
+ /**< KBits or Packets */
+} ioc_fm_pcd_plcr_non_passthrough_alg_param_t;
+
+/*
+ * @Description Parameters for defining the next engine after policer
+ */
+typedef union ioc_fm_pcd_plcr_next_engine_params_u {
+ ioc_fm_pcd_done_action action;
+ /**< Action - when next engine is BMI (done) */
+ void *p_profile;
+ /**< Policer profile handle - used when next
+ * engine is PLCR, must be a SHARED profile
+ */
+ void *p_direct_scheme;
+ /**< Direct scheme select - when next engine is
+ * Keygen
+ */
+} ioc_fm_pcd_plcr_next_engine_params_u;
+
+typedef struct ioc_fm_pcd_port_params_t {
+ ioc_fm_port_type port_type;
+ /**< Type of port for this profile */
+ uint8_t port_id;
+ /**< FM-Port id of port for this profile */
+} ioc_fm_pcd_port_params_t;
+
+/*
+ * @Description Parameters for defining the policer profile entry
+ * (Must match struct ioc_fm_pcd_plcr_profile_params_t defined in
+ * fm_pcd_ext.h)
+ */
+struct fm_pcd_plcr_profile_params_t {
+ bool modify;
+ /**< TRUE to change an existing profile */
+ union {
+ struct {
+ ioc_fm_pcd_profile_type_selection profile_type;
+ /**< Type of policer profile */
+ ioc_fm_pcd_port_params_t *p_fm_port;
+ /**< Relevant for per-port profiles only */
+ uint16_t relative_profile_id;
+ /**< Profile id - relative to shared group or to
+ * port
+ */
+ } new_params;
+ /**< Use it when modify = FALSE */
+ void *p_profile;
+ /**< A handle to a profile - use it when modify=TRUE */
+ } profile_select;
+ ioc_fm_pcd_plcr_algorithm_selection alg_selection;
+ /**< Profile Algorithm PASS_THROUGH, RFC_2698, RFC_4115 */
+ ioc_fm_pcd_plcr_color_mode color_mode;
+ /**< COLOR_BLIND, COLOR_AWARE */
+
+ union {
+ ioc_fm_pcd_plcr_color dflt_color;
+ /**< For Color-Blind Pass-Through mode; the policer will
+ * re-color any incoming packet with the default value.
+ */
+ ioc_fm_pcd_plcr_color override;
+ /**< For Color-Aware modes; the profile response to a pre-color
+ * value of 2'b11.
+ */
+ } color;
+
+ ioc_fm_pcd_plcr_non_passthrough_alg_param_t
+ non_passthrough_alg_param;
+ /**< RFC2698 or RFC4115 parameters */
+
+ ioc_fm_pcd_engine next_engine_on_green;
+ /**< Next engine for green-colored frames */
+ ioc_fm_pcd_plcr_next_engine_params_u params_on_green;
+ /**< Next engine parameters for green-colored frames */
+
+ ioc_fm_pcd_engine next_engine_on_yellow;
+ /**< Next engine for yellow-colored frames */
+ ioc_fm_pcd_plcr_next_engine_params_u params_on_yellow;
+ /**< Next engine parameters for yellow-colored frames */
+
+ ioc_fm_pcd_engine next_engine_on_red;
+ /**< Next engine for red-colored frames */
+ ioc_fm_pcd_plcr_next_engine_params_u params_on_red;
+ /**< Next engine parameters for red-colored frames */
+
+ bool trap_profile_on_flow_A;
+ /**< Obsolete - do not use */
+ bool trap_profile_on_flow_B;
+ /**< Obsolete - do not use */
+ bool trap_profile_on_flow_C;
+ /**< Obsolete - do not use */
+};
+
+typedef struct ioc_fm_pcd_plcr_profile_params_t {
+ struct fm_pcd_plcr_profile_params_t param;
+ void *id;
+ /**< output parameter; Returns the profile Id to be used */
+} ioc_fm_pcd_plcr_profile_params_t;
+
+/*
+ * @Description A structure for modifying CC tree next engine
+ */
+typedef struct ioc_fm_pcd_cc_tree_modify_next_engine_params_t {
+ void *id;
+ /**< CC tree Id to be used */
+ uint8_t grp_indx;
+ /**< A Group index in the tree */
+ uint8_t indx;
+ /**< Entry index in the group defined by grp_index */
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params;
+ /**< Parameters for the next for the defined Key in the
+ * p_key
+ */
+} ioc_fm_pcd_cc_tree_modify_next_engine_params_t;
+
+/*
+ * @Description A structure for modifying CC node next engine
+ */
+typedef struct ioc_fm_pcd_cc_node_modify_next_engine_params_t {
+ void *id;
+ /**< CC node Id to be used */
+ uint16_t key_indx;
+ /**< Key index for Next Engine Params modifications;
+ * NOTE: This parameter is IGNORED for miss-key!
+ */
+ uint8_t key_size;
+ /**< Key size of added key */
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params;
+ /**< parameters for the next for the defined Key in the
+ * p_key
+ */
+} ioc_fm_pcd_cc_node_modify_next_engine_params_t;
+
+/*
+ * @Description A structure for remove CC node key
+ */
+typedef struct ioc_fm_pcd_cc_node_remove_key_params_t {
+ void *id;
+ /**< CC node Id to be used */
+ uint16_t key_indx;
+ /**< Key index for Next Engine Params modifications;
+ * NOTE: This parameter is IGNORED for miss-key!
+ */
+} ioc_fm_pcd_cc_node_remove_key_params_t;
+
+/*
+ * @Description A structure for modifying CC node key and next engine
+ */
+typedef struct ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t {
+ void *id;
+ /**< CC node Id to be used */
+ uint16_t key_indx;
+ /**< Key index for Next Engine Params modifications;
+ * NOTE: This parameter is IGNORED for miss-key!
+ */
+ uint8_t key_size;
+ /**< Key size of added key */
+ ioc_fm_pcd_cc_key_params_t key_params;
+ /**< it's array with num_of_keys entries each entry in
+ * the array of the type ioc_fm_pcd_cc_key_params_t
+ */
+} ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t;
+
+/*
+ * @Description A structure for modifying CC node key
+ */
+typedef struct ioc_fm_pcd_cc_node_modify_key_params_t {
+ void *id;
+ /**< CC node Id to be used */
+ uint16_t key_indx;
+ /**< Key index for Next Engine Params modifications;
+ * NOTE: This parameter is IGNORED for miss-key!
+ */
+ uint8_t key_size;
+ /**< Key size of added key */
+ uint8_t *p_key;
+ /**< Pointer to the key of the size defined in key_size
+ */
+ uint8_t *p_mask;
+ /**< Pointer to the Mask per key of the size defined in
+ * key_size. p_key and p_mask (if defined) have to be of
+ * the same size as defined in the key_size
+ */
+} ioc_fm_pcd_cc_node_modify_key_params_t;
+
+/*
+ * @Description A structure with the arguments for the
+ * fm_pcd_hash_table_remove_key ioctl() call
+ */
+typedef struct ioc_fm_pcd_hash_table_remove_key_params_t {
+ void *p_hash_tbl; /**< The id of the hash table */
+ uint8_t key_size; /**< The size of the key to remove */
+ uint8_t *p_key; /**< Pointer to the key to remove */
+} ioc_fm_pcd_hash_table_remove_key_params_t;
+
+/*
+ * @Description Parameters for selecting a location for requested manipulation
+ */
+typedef struct ioc_fm_manip_hdr_info_t {
+ ioc_net_header_type hdr; /**< Header selection */
+ ioc_fm_pcd_hdr_index hdr_index;
+ /**< Relevant only for MPLS, VLAN and tunneled IP.
+ * Otherwise should be cleared.
+ */
+ bool by_field;
+ /**< TRUE if the location of manipulation is according
+ * to some field in the specific header
+ */
+ ioc_fm_pcd_fields_u full_field;
+ /**< Relevant only when by_field = TRUE: Extract field
+ */
+} ioc_fm_manip_hdr_info_t;
+
+/*
+ * @Description Parameters for defining header removal by header type
+ */
+typedef struct ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t {
+ ioc_fm_pcd_manip_hdr_rmv_by_hdr_type type;
+ /**< Selection of header removal location */
+ union {
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+ struct {
+ bool include;
+ /**< If FALSE, remove until the specified header (not
+ * including the header); If TRUE, remove also the
+ * specified header.
+ */
+ ioc_fm_manip_hdr_info_t hdr_info;
+ } from_start_by_hdr;
+ /**< Relevant when type =
+ * e_IOC_FM_PCD_MANIP_RMV_BY_HDR_FROM_START
+ */
+#endif /* FM_CAPWAP_SUPPORT */
+#if (DPAA_VERSION >= 11)
+ ioc_fm_manip_hdr_info_t hdr_info;
+ /**< Relevant when type = e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START
+ */
+#endif /* (DPAA_VERSION >= 11) */
+ ioc_fm_pcd_manip_hdr_rmv_specific_l2 specific_l2;
+ /**< Relevant when type = e_IOC_FM_PCD_MANIP_BY_HDR_SPECIFIC_L2;
+ * Defines which L2 headers to remove.
+ */
+ } u;
+} ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t;
+
+/*
+ * @Description Parameters for configuring IP fragmentation manipulation
+ */
+typedef struct ioc_fm_pcd_manip_frag_ip_params_t {
+ uint16_t size_for_fragmentation;
+ /**< If length of the frame is greater than this value, IP
+ * fragmentation will be executed.
+ */
+#if DPAA_VERSION == 10
+ uint8_t scratch_bpid;
+ /**< Absolute buffer pool id according to BM configuration.*/
+#endif /* DPAA_VERSION == 10 */
+ bool sg_bpid_en;
+ /**< Enable a dedicated buffer pool id for the Scatter/Gather
+ * buffer allocation; If disabled, the Scatter/Gather buffer
+ * will be allocated from the same pool as the received frame's
+ * buffer.
+ */
+ uint8_t sg_bpid;
+ /**< Scatter/Gather buffer pool id; This parameter is relevant
+ * when 'sg_bpid_en=TRUE'; Same LIODN number is used for these
+ * buffers as for the received frames buffers, so buffers of
+ * this pool need to be allocated in the same memory area as the
+ * received buffers. If the received buffers arrive from
+ * different sources, the Scatter/Gather BP id should be mutual
+ * to all these sources.
+ */
+ ioc_fm_pcd_manip_dont_frag_action dont_frag_action;
+ /**< Dont Fragment Action - If an IP packet is larger than MTU
+ * and its DF bit is set, then this field will determine the
+ * action to be taken.
+ */
+} ioc_fm_pcd_manip_frag_ip_params_t;
+
+/*
+ * @Description Parameters for configuring IP reassembly manipulation.
+ *
+ * This is a common structure for both IPv4 and IPv6 reassembly
+ * manipulation. For reassembly of both IPv4 and IPv6, make sure
+ * to set the 'hdr' field in ioc_fm_pcd_manip_reassem_params_t to
+ * IOC_header_type_ipv_6.
+ */
+typedef struct ioc_fm_pcd_manip_reassem_ip_params_t {
+ uint8_t relative_scheme_id[2];
+ /**< Partition relative scheme id: relativeSchemeId[0] -
+ * Relative scheme ID for IPV4 Reassembly manipulation;
+ * relativeSchemeId[1] - Relative scheme ID for IPV6
+ * Reassembly manipulation; NOTE: The following comment
+ * is relevant only for FMAN v2 devices: Relative scheme
+ * ID for IPv4/IPv6 Reassembly manipulation must be
+ * smaller than the user schemes id to ensure that the
+ * reassembly's schemes will be first match. The
+ * remaining schemes, if defined, should have higher
+ * relative scheme ID.
+ */
+#if DPAA_VERSION >= 11
+ uint32_t non_consistent_sp_fqid;
+ /**< In case that other fragments of the frame
+ * corresponds to different storage profile than the
+ * opening fragment (Non-Consistent-SP state) then one
+ * of two possible scenarios occurs: if
+ * 'nonConsistentSpFqid != 0', the reassembled frame
+ * will be enqueued to this fqid, otherwise a 'Non
+ * Consistent SP' bit will be set in the FD[status].
+ */
+#else
+ uint8_t sg_bpid;
+ /**< Buffer pool id for the S/G frame created by the
+ * reassembly process
+ */
+#endif /* DPAA_VERSION >= 11 */
+ uint8_t data_mem_id;
+ /**< Memory partition ID for the IPR's external tables
+ * structure
+ */
+ uint16_t data_liodn_offset;
+ /**< LIODN offset for access the IPR's external tables
+ * structure.
+ */
+ uint16_t min_frag_size[2];
+ /**< Minimum fragment size: minFragSize[0] - for ipv4,
+ * minFragSize[1] - for ipv6
+ */
+ ioc_fm_pcd_manip_reassem_ways_number num_of_frames_per_hash_entry[2];
+ /**< Number of frames per hash entry needed for
+ * reassembly process: num_of_frames_per_hash_entry[0] -
+ * for ipv4 (max value is
+ * e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH);
+ * num_of_frames_per_hash_entry[1] - for ipv6 (max value
+ * is e_IOC_FM_PCD_MANIP_SIX_WAYS_HASH).
+ */
+ uint16_t max_num_frames_in_process;
+ /**< Number of frames which can be processed by
+ * Reassembly in the same time; Must be power of 2; In
+ * the case num_of_frames_per_hash_entry ==
+ * e_IOC_FM_PCD_MANIP_FOUR_WAYS_HASH,
+ * max_num_frames_in_process has to be in the range of
+ * 4 - 512; In the case num_of_frames_per_hash_entry ==
+ * e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH,
+ * max_num_frames_in_process has to be in the range of
+ * 8 - 2048.
+ */
+ ioc_fm_pcd_manip_reassem_time_out_mode time_out_mode;
+ /**< Expiration delay initialized by Reassembly process
+ */
+ uint32_t fqid_for_time_out_frames;
+ /**< FQID in which time out frames will enqueue during
+ * Time Out Process
+ */
+ uint32_t timeout_threshold_for_reassm_process;
+ /**< Represents the time interval in microseconds which
+ * defines if opened frame (at least one fragment was
+ * processed but not all the fragments)is found as too
+ * old
+ */
+} ioc_fm_pcd_manip_reassem_ip_params_t;
+
+/*
+ * @Description Parameters for defining IPSEC manipulation
+ */
+typedef struct ioc_fm_pcd_manip_special_offload_ipsec_params_t {
+ bool decryption;
+ /**< TRUE if being used in decryption direction;
+ * FALSE if being used in encryption direction.
+ */
+ bool ecn_copy;
+ /**< TRUE to copy the ECN bits from inner/outer to
+ * outer/inner (direction depends on the 'decryption'
+ * field).
+ */
+ bool dscp_copy;
+ /**< TRUE to copy the DSCP bits from inner/outer to
+ * outer/inner (direction depends on the 'decryption'
+ * field).
+ */
+ bool variable_ip_hdr_len;
+ /**< TRUE for supporting variable IP header length in
+ * decryption.
+ */
+ bool variable_ip_version;
+ /**< TRUE for supporting both IP version on the same SA
+ * in encryption
+ */
+ uint8_t outer_ip_hdr_len;
+ /**< If 'variable_ip_version == TRUE' than this field
+ * must be set to non-zero value; It is specifies the
+ * length of the outer IP header that was configured in
+ * the corresponding SA.
+ */
+ uint16_t arw_size;
+ /**< if <> '0' then will perform ARW check for this SA;
+ * The value must be a multiplication of 16
+ */
+ void *arw_addr;
+ /**< if arwSize <> '0' then this field must be set to
+ * non-zero value; MUST be allocated from FMAN's MURAM
+ * that the post-sec op-port belong Must be 4B aligned.
+ * Required MURAM size is
+ * '(NEXT_POWER_OF_2(arwSize+32))/8+4' Bytes
+ */
+} ioc_fm_pcd_manip_special_offload_ipsec_params_t;
+
+#if (DPAA_VERSION >= 11)
+/*
+ * @Description Parameters for configuring CAPWAP fragmentation manipulation
+ *
+ * Restrictions:
+ * - Maximum number of fragments per frame is 16.
+ * - Transmit confirmation is not supported.
+ * - Fragmentation nodes must be set as the last PCD action (i.e.
+ * the corresponding CC node key must have next engine set to
+ * e_FM_PCD_DONE).
+ * - Only BMan buffers shall be used for frames to be fragmented.
+ * - NOTE: The following comment is relevant only for FMAN v3
+ * devices: IPF does not support VSP. Therefore, on the same
+ * port where we have IPF we cannot support VSP.
+ */
+typedef struct ioc_fm_pcd_manip_frag_capwap_params_t {
+ uint16_t size_for_fragmentation;
+ /**< If length of the frame is greater than this value,
+ * CAPWAP fragmentation will be executed.
+ */
+ bool sg_bpid_en;
+ /**< Enable a dedicated buffer pool id for the
+ * Scatter/Gather buffer allocation; If disabled, the
+ * Scatter/Gather buffer will be allocated from the same
+ * pool as the received frame's buffer.
+ */
+ uint8_t sg_bpid;
+ /**< Scatter/Gather buffer pool id; This parameters is
+ * relevant when 'sg_bpidEn=TRUE'; Same LIODN number is
+ * used for these buffers as for the received frames
+ * buffers, so buffers of this pool need to be allocated
+ * in the same memory area as the received buffers. If
+ * the received buffers arrive from different sources,
+ * the Scatter/Gather BP id should be mutual to all
+ * these sources.
+ */
+ bool compress_mode_en;
+ /**< CAPWAP Header Options Compress Enable mode; When
+ * this mode is enabled then only the first fragment
+ * include the CAPWAP header options field (if user
+ * provides it in the input frame) and all other
+ * fragments exclude the CAPWAP options field (CAPWAP
+ * header is updated accordingly).
+ */
+} ioc_fm_pcd_manip_frag_capwap_params_t;
+
+/*
+ * @Description Parameters for configuring CAPWAP reassembly manipulation.
+ *
+ * Restrictions:
+ * - Application must define one scheme to catch the reassembled
+ * frames.
+ * - Maximum number of fragments per frame is 16.
+ */
+typedef struct ioc_fm_pcd_manip_reassem_capwap_params_t {
+ uint8_t relative_scheme_id;
+ /**< Partition relative scheme id; NOTE: this id must be
+ * smaller than the user schemes id to ensure that the
+ * reassembly scheme will be first match; Rest schemes,
+ * if defined, should have higher relative scheme ID.
+ */
+ uint8_t data_mem_id;
+ /**< Memory partition ID for the IPR's external tables
+ * structure
+ */
+ uint16_t data_liodn_offset;
+ /**< LIODN offset for access the IPR's external tables
+ * structure.
+ */
+ uint16_t max_reassembled_frame_length;
+ /**< The maximum CAPWAP reassembled frame length in
+ * bytes; If maxReassembledFrameLength == 0, any
+ * successful reassembled frame length is considered as
+ * a valid length; if maxReassembledFrameLength > 0, a
+ * successful reassembled frame which its length exceeds
+ * this value is considered as an error frame (FD
+ * status[CRE] bit is set).
+ */
+ ioc_fm_pcd_manip_reassem_ways_number num_of_frames_per_hash_entry;
+ /**< Number of frames per hash entry needed for
+ * reassembly process
+ */
+ uint16_t max_num_frames_in_process;
+ /**< Number of frames which can be processed by
+ * reassembly in the same time; Must be power of 2; In
+ * the case num_of_frames_per_hash_entry ==
+ * e_FM_PCD_MANIP_FOUR_WAYS_HASH,
+ * max_num_frames_in_process has to be in the range of
+ * 4 - 512; In the case num_of_frames_per_hash_entry ==
+ * e_FM_PCD_MANIP_EIGHT_WAYS_HASH,
+ * max_num_frames_in_process has to be in the range of
+ * 8 - 2048.
+ */
+ ioc_fm_pcd_manip_reassem_time_out_mode time_out_mode;
+ /**< Expiration delay initialized by Reassembly process
+ */
+ uint32_t fqid_for_time_out_frames;
+ /**< FQID in which time out frames will enqueue during
+ * Time Out Process; Recommended value for this field is
+ * 0; in this way timed-out frames will be discarded
+ */
+ uint32_t timeout_threshold_for_reassm_process;
+ /**< Represents the time interval in microseconds which
+ * defines if opened frame (at least one fragment was
+ * processed but not all the fragments)is found as too
+ * old
+ */
+} ioc_fm_pcd_manip_reassem_capwap_params_t;
+
+/*
+ * @Description structure for defining CAPWAP manipulation
+ */
+typedef struct ioc_fm_pcd_manip_special_offload_capwap_params_t {
+ bool dtls;
+ /**< TRUE if continue to SEC DTLS encryption */
+ ioc_fm_pcd_manip_hdr_qos_src qos_src;
+ /**< TODO */
+} ioc_fm_pcd_manip_special_offload_capwap_params_t;
+
+#endif /* (DPAA_VERSION >= 11) */
+
+/*
+ * @Description Parameters for defining special offload manipulation
+ */
+typedef struct ioc_fm_pcd_manip_special_offload_params_t {
+ ioc_fm_pcd_manip_special_offload_type type;
+ /**< Type of special offload manipulation */
+ union {
+ ioc_fm_pcd_manip_special_offload_ipsec_params_t ipsec;
+ /**< Parameters for IPSec; Relevant when type =
+ * e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC
+ */
+
+ ioc_fm_pcd_manip_special_offload_capwap_params_t capwap;
+ /**< Parameters for CAPWAP; Relevant when type =
+ * e_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP
+ */
+ } u;
+} ioc_fm_pcd_manip_special_offload_params_t;
+
+/*
+ * @Description Parameters for defining generic removal manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_rmv_generic_params_t {
+ uint8_t offset;
+ /**< Offset from beginning of header to the start location of
+ * the removal
+ */
+ uint8_t size; /**< Size of removed section */
+} ioc_fm_pcd_manip_hdr_rmv_generic_params_t;
+
+/*
+ * @Description Parameters for defining insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_t {
+ uint8_t size; /**< size of inserted section */
+ uint8_t *p_data; /**< data to be inserted */
+} ioc_fm_pcd_manip_hdr_insrt_t;
+
+/*
+ * @Description Parameters for defining generic insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_generic_params_t {
+ uint8_t offset;
+ /**< Offset from beginning of header to the start
+ * location of the insertion
+ */
+ uint8_t size; /**< Size of inserted section */
+ bool replace;
+ /**< TRUE to override (replace) existing data at
+ * 'offset', FALSE to insert
+ */
+ uint8_t *p_data;
+ /**< Pointer to data to be inserted */
+} ioc_fm_pcd_manip_hdr_insrt_generic_params_t;
+
+/*
+ * @Description Parameters for defining header manipulation VLAN DSCP To Vpri
+ * translation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t {
+ uint8_t dscp_to_vpri_table[IOC_FM_PCD_MANIP_DSCP_TO_VLAN_TRANS];
+ /**< A table of VPri values for each DSCP value; The index is
+ * the D_SCP value (0-0x3F) and the value is the corresponding
+ * VPRI (0-15).
+ */
+ uint8_t vpri_def_val;
+ /**< 0-7, Relevant only if if update_type =
+ * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN, this field
+ * is the Q Tag default value if the IP header is not found.
+ */
+} ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t;
+
+/*
+ * @Description Parameters for defining header manipulation VLAN fields
+ * updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_vlan_t {
+ ioc_fm_pcd_manip_hdr_field_update_vlan update_type;
+ /**< Selects VLAN update type */
+ union {
+ uint8_t vpri;
+ /**< 0-7, Relevant only if If update_type =
+ * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_PRI, this is the new
+ * VLAN pri.
+ */
+ ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t dscp_to_vpri;
+ /**< Parameters structure, Relevant only if update_type =
+ * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN.
+ */
+ } u;
+} ioc_fm_pcd_manip_hdr_field_update_vlan_t;
+
+/*
+ * @Description Parameters for defining header manipulation IPV4 fields
+ * updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_ipv4_t {
+ ioc_ipv4_hdr_manip_update_flags_t valid_updates;
+ /**< ORed flag, selecting the required updates */
+ uint8_t tos;
+ /**< 8 bit New TOS; Relevant if valid_updates contains
+ * IOC_HDR_MANIP_IPV4_TOS
+ */
+ uint16_t id;
+ /**< 16 bit New IP ID; Relevant only if
+ * valid_updates contains IOC_HDR_MANIP_IPV4_ID
+ */
+ uint32_t src;
+ /**< 32 bit New IP SRC; Relevant only if
+ * valid_updates contains IOC_HDR_MANIP_IPV4_SRC
+ */
+ uint32_t dst;
+ /**< 32 bit New IP DST; Relevant only if
+ * valid_updates contains IOC_HDR_MANIP_IPV4_DST
+ */
+} ioc_fm_pcd_manip_hdr_field_update_ipv4_t;
+
+/*
+ * @Description Parameters for defining header manipulation IPV6 fields
+ * updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_ipv6_t {
+ ioc_ipv6_hdr_manip_update_flags_t valid_updates;
+ /**< ORed flag, selecting the required updates */
+ uint8_t traffic_class;
+ /**< 8 bit New Traffic Class; Relevant if valid_updates
+ * contains IOC_HDR_MANIP_IPV6_TC
+ */
+ uint8_t src[ioc_net_hf_ipv6_addr_size];
+ /**< 16 byte new IP SRC; Relevant only if valid_updates
+ * contains IOC_HDR_MANIP_IPV6_SRC
+ */
+ uint8_t dst[ioc_net_hf_ipv6_addr_size];
+ /**< 16 byte new IP DST; Relevant only if valid_updates
+ * contains IOC_HDR_MANIP_IPV6_DST
+ */
+} ioc_fm_pcd_manip_hdr_field_update_ipv6_t;
+
+/*
+ * @Description Parameters for defining header manipulation TCP/UDP fields
+ * updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t {
+ ioc_tcp_udp_hdr_manip_update_flags_t valid_updates;
+ /**< ORed flag, selecting the required updates */
+ uint16_t src;
+ /**< 16 bit New TCP/UDP SRC; Relevant only if
+ * valid_updates contains IOC_HDR_MANIP_TCP_UDP_SRC
+ */
+ uint16_t dst;
+ /**< 16 bit New TCP/UDP DST; Relevant only if
+ * valid_updates contains IOC_HDR_MANIP_TCP_UDP_DST
+ */
+} ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t;
+
+/*
+ * @Description Parameters for defining header manipulation fields updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_params_t {
+ ioc_fm_pcd_manip_hdr_field_update_type type;
+ /**< Type of header field update manipulation */
+ union {
+ ioc_fm_pcd_manip_hdr_field_update_vlan_t vlan;
+ /**< Parameters for VLAN update. Relevant when type =
+ * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN
+ */
+ ioc_fm_pcd_manip_hdr_field_update_ipv4_t ipv4;
+ /**< Parameters for IPv4 update. Relevant when type =
+ * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4
+ */
+ ioc_fm_pcd_manip_hdr_field_update_ipv6_t ipv6;
+ /**< Parameters for IPv6 update. Relevant when type =
+ * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6
+ */
+ ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t tcp_udp;
+ /**< Parameters for TCP/UDP update. Relevant when type =
+ * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP
+ */
+ } u;
+} ioc_fm_pcd_manip_hdr_field_update_params_t;
+
+/*
+ * @Description Parameters for defining custom header manipulation for IP
+ * replacement
+ */
+typedef struct ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t {
+ ioc_fm_pcd_manip_hdr_custom_ip_replace replace_type;
+ /**< Selects replace update type */
+ bool dec_ttl_hl;
+ /**< Decrement TTL (IPV4) or Hop limit (IPV6) by 1 */
+ bool update_ipv4_id;
+ /**< Relevant when replace_type =
+ * e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4
+ */
+ uint16_t id;
+ /**< 16 bit New IP ID; Relevant only if update_ipv4_id = TRUE */
+ uint8_t hdr_size;
+ /**< The size of the new IP header */
+ uint8_t hdr[IOC_FM_PCD_MANIP_MAX_HDR_SIZE];
+ /**< The new IP header */
+} ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t;
+
+/*
+ * @Description Parameters for defining custom header manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_custom_params_t {
+ ioc_fm_pcd_manip_hdr_custom_type type;
+ /**< Type of header field update manipulation */
+ union {
+ ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t ip_hdr_replace;
+ /**< Parameters IP header replacement */
+ } u;
+} ioc_fm_pcd_manip_hdr_custom_params_t;
+
+/*
+ * @Description Parameters for defining specific L2 insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t {
+ ioc_fm_pcd_manip_hdr_insrt_specific_l2 specific_l2;
+ /**< Selects which L2 headers to insert */
+ bool update;
+ /**< TRUE to update MPLS header */
+ uint8_t size;
+ /**< size of inserted section */
+ uint8_t *p_data;
+ /**< data to be inserted */
+} ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t;
+
+#if (DPAA_VERSION >= 11)
+/*
+ * @Description Parameters for defining IP insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_ip_params_t {
+ bool calc_l4_checksum;
+ /**< Calculate L4 checksum. */
+ ioc_fm_pcd_manip_hdr_qos_mapping_mode mapping_mode;
+ /**< TODO */
+ uint8_t last_pid_offset;
+ /**< the offset of the last Protocol within the inserted
+ * header
+ */
+ uint16_t id; /**< 16 bit New IP ID */
+ bool dont_frag_overwrite;
+ /**< IPv4 only. DF is overwritten with the hash-result
+ * next-to-last byte. This byte is configured to be
+ * overwritten when RPD is set.
+ */
+ uint8_t last_dst_offset;
+ /**< IPv6 only. if routing extension exist, user should
+ * set the offset of the destination address in order
+ * to calculate UDP checksum pseudo header; Otherwise
+ * set it to '0'.
+ */
+ ioc_fm_pcd_manip_hdr_insrt_t insrt;
+ /**< size and data to be inserted. */
+} ioc_fm_pcd_manip_hdr_insrt_ip_params_t;
+#endif /* (DPAA_VERSION >= 11) */
+
+/*
+ * @Description Parameters for defining header insertion manipulation by
+ * header type
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t {
+ ioc_fm_pcd_manip_hdr_insrt_by_hdr_type type;
+ /**< Selects manipulation type */
+ union {
+ ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t specific_l2_params;
+ /**< Used when type =
+ * e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2: Selects
+ * which L2 headers to remove
+ */
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_hdr_insrt_ip_params_t ip_params;
+ /**< Used when type = e_FM_PCD_MANIP_INSRT_BY_HDR_IP */
+ ioc_fm_pcd_manip_hdr_insrt_t insrt;
+ /**< Used when type is one of
+ * e_FM_PCD_MANIP_INSRT_BY_HDR_UDP,
+ * e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE, or
+ * e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP
+ */
+#endif /* (DPAA_VERSION >= 11) */
+ } u;
+} ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t;
+
+/*
+ * @Description Parameters for defining header insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_params_t {
+ ioc_fm_pcd_manip_hdr_insrt_type type;
+ /**< Type of insertion manipulation */
+ union {
+ ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t by_hdr;
+ /**< Parameters for defining header insertion
+ * manipulation by header type, relevant if 'type' =
+ * e_IOC_FM_PCD_MANIP_INSRT_BY_HDR
+ */
+ ioc_fm_pcd_manip_hdr_insrt_generic_params_t generic;
+ /**< Parameters for defining generic header insertion
+ * manipulation, relevant if type =
+ * e_IOC_FM_PCD_MANIP_INSRT_GENERIC
+ */
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+ ioc_fm_pcd_manip_hdr_insrt_by_template_params_t by_template;
+ /**< Parameters for defining header insertion
+ * manipulation by template, relevant if 'type' =
+ * e_IOC_FM_PCD_MANIP_INSRT_BY_TEMPLATE
+ */
+#endif /* FM_CAPWAP_SUPPORT */
+ } u;
+} ioc_fm_pcd_manip_hdr_insrt_params_t;
+
+/*
+ * @Description Parameters for defining header removal manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_rmv_params_t {
+ ioc_fm_pcd_manip_hdr_rmv_type type;
+ /**< Type of header removal manipulation */
+ union {
+ ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t by_hdr;
+ /**< Parameters for defining header removal manipulation
+ * by header type, relevant if type =
+ * e_IOC_FM_PCD_MANIP_RMV_BY_HDR
+ */
+ ioc_fm_pcd_manip_hdr_rmv_generic_params_t generic;
+ /**< Parameters for defining generic header removal
+ * manipulation, relevant if type =
+ * e_IOC_FM_PCD_MANIP_RMV_GENERIC
+ */
+ } u;
+} ioc_fm_pcd_manip_hdr_rmv_params_t;
+
+/*
+ * @Description Parameters for defining header manipulation node
+ */
+typedef struct ioc_fm_pcd_manip_hdr_params_t {
+ bool rmv;
+ /**< TRUE, to define removal manipulation */
+ ioc_fm_pcd_manip_hdr_rmv_params_t rmv_params;
+ /**< Parameters for removal manipulation, relevant if
+ * 'rmv' = TRUE
+ */
+
+ bool insrt;
+ /**< TRUE, to define insertion manipulation */
+ ioc_fm_pcd_manip_hdr_insrt_params_t insrt_params;
+ /**< Parameters for insertion manipulation, relevant if
+ * 'insrt' = TRUE
+ */
+
+ bool field_update;
+ /**< TRUE, to define field update manipulation */
+ ioc_fm_pcd_manip_hdr_field_update_params_t field_update_params;
+ /**< Parameters for field update manipulation, relevant
+ * if 'fieldUpdate' = TRUE
+ */
+
+ bool custom;
+ /**< TRUE, to define custom manipulation */
+ ioc_fm_pcd_manip_hdr_custom_params_t custom_params;
+ /**< Parameters for custom manipulation, relevant if
+ * 'custom' = TRUE
+ */
+
+ bool dont_parse_after_manip;
+ /**< FALSE to activate the parser a second time after
+ * completing the manipulation on the frame
+ */
+} ioc_fm_pcd_manip_hdr_params_t;
+
+/*
+ * @Description structure for defining fragmentation manipulation
+ */
+typedef struct ioc_fm_pcd_manip_frag_params_t {
+ ioc_net_header_type hdr;
+ /**< Header selection */
+ union {
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_frag_capwap_params_t capwap_frag;
+ /**< Parameters for defining CAPWAP fragmentation,
+ * relevant if 'hdr' = HEADER_TYPE_CAPWAP
+ */
+#endif /* (DPAA_VERSION >= 11) */
+ ioc_fm_pcd_manip_frag_ip_params_t ip_frag;
+ /**< Parameters for defining IP fragmentation, relevant
+ * if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6
+ */
+ } u;
+} ioc_fm_pcd_manip_frag_params_t;
+
+/*
+ * @Description structure for defining reassemble manipulation
+ */
+typedef struct ioc_fm_pcd_manip_reassem_params_t {
+ ioc_net_header_type hdr;
+ /**< Header selection */
+ union {
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_reassem_capwap_params_t capwap_reassem;
+ /**< Parameters for defining CAPWAP reassembly, relevant
+ * if 'hdr' = HEADER_TYPE_CAPWAP
+ */
+#endif /* (DPAA_VERSION >= 11) */
+ ioc_fm_pcd_manip_reassem_ip_params_t ip_reassem;
+ /**< Parameters for defining IP reassembly, relevant if
+ * 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6
+ */
+ } u;
+} ioc_fm_pcd_manip_reassem_params_t;
+
+/*
+ * @Description Parameters for defining a manipulation node
+ */
+struct fm_pcd_manip_params_t {
+ ioc_fm_pcd_manip_type type;
+ /**< Selects type of manipulation node */
+ union {
+ ioc_fm_pcd_manip_hdr_params_t hdr;
+ /**< Parameters for defining header manipulation node */
+ ioc_fm_pcd_manip_reassem_params_t reassem;
+ /**< Parameters for defining reassembly manipulation
+ * node
+ */
+ ioc_fm_pcd_manip_frag_params_t frag;
+ /**< Parameters for defining fragmentation manipulation
+ * node
+ */
+ ioc_fm_pcd_manip_special_offload_params_t special_offload;
+ /**< Parameters for defining special offload
+ * manipulation node
+ */
+ } u;
+ void *p_next_manip;
+ /**< Handle to another (previously defined) manipulation node;
+ * Allows concatenation of manipulation actions. This parameter
+ * is optional and may be NULL.
+ */
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+ bool frag_or_reasm;
+ /**< TRUE, if defined fragmentation/reassembly manipulation */
+ ioc_fm_pcd_manip_frag_or_reasm_params_t
+ frag_or_reasm_params;
+ /**< Parameters for fragmentation/reassembly manipulation,
+ * relevant if frag_or_reasm = TRUE
+ */
+#endif /* FM_CAPWAP_SUPPORT */
+};
+
+typedef struct ioc_fm_pcd_manip_params_t {
+ struct fm_pcd_manip_params_t param;
+ void *id;
+} ioc_fm_pcd_manip_params_t;
+
+/*
+ * @Description Structure for retrieving IP reassembly statistics
+ */
+typedef struct ioc_fm_pcd_manip_reassem_ip_stats_t {
+ /* common counters for both IPv4 and IPv6 */
+ uint32_t timeout;
+ /**< Counts the number of TimeOut occurrences */
+ uint32_t rfd_pool_busy;
+ /**< Counts the number of failed attempts to allocate a
+ * Reassembly Frame Descriptor
+ */
+ uint32_t internal_buffer_busy;
+ /**< Counts the number of times an internal buffer busy occurred
+ */
+ uint32_t external_buffer_busy;
+ /**< Counts the number of times external buffer busy occurred */
+ uint32_t sg_fragments;
+ /**< Counts the number of Scatter/Gather fragments */
+ uint32_t dma_semaphore_depletion;
+ /**< Counts the number of failed attempts to allocate a DMA
+ * semaphore
+ */
+#if (DPAA_VERSION >= 11)
+ uint32_t non_consistent_sp;
+ /**< Counts the number of Non Consistent Storage Profile events
+ * for successfully reassembled frames
+ */
+#endif /* (DPAA_VERSION >= 11) */
+struct {
+ uint32_t successfully_reassembled;
+ /**< Counts the number of successfully reassembled frames */
+ uint32_t valid_fragments;
+ /**< Counts the total number of valid fragments that have been
+ * processed for all frames
+ */
+ uint32_t processed_fragments;
+ /**< Counts the number of processed fragments (valid and error
+ * fragments) for all frames
+ */
+ uint32_t malformed_fragments;
+ /**< Counts the number of malformed fragments processed for all
+ * frames
+ */
+ uint32_t discarded_fragments;
+ /**< Counts the number of fragments discarded by the reassembly
+ * process
+ */
+ uint32_t auto_learn_busy;
+ /**< Counts the number of times a busy condition occurs when
+ * attempting to access an IP-Reassembly Automatic Learning Hash
+ * set
+ */
+ uint32_t more_than16fragments;
+ /**< Counts the fragment occurrences in which the number of
+ * fragments-per-frame exceeds 16
+ */
+ } specific_hdr_statistics[2];
+ /**< slot '0' is for IPv4, slot '1' is for IPv6 */
+} ioc_fm_pcd_manip_reassem_ip_stats_t;
+
+/*
+ * @Description Structure for retrieving IP fragmentation statistics
+ */
+typedef struct ioc_fm_pcd_manip_frag_ip_stats_t {
+ uint32_t total_frames;
+ /**< Number of frames that passed through the
+ * manipulation node
+ */
+ uint32_t fragmented_frames;
+ /**< Number of frames that were fragmented */
+ uint32_t generated_fragments;
+ /**< Number of fragments that were generated */
+} ioc_fm_pcd_manip_frag_ip_stats_t;
+
+#if (DPAA_VERSION >= 11)
+/*
+ * @Description Structure for retrieving CAPWAP reassembly statistics
+ */
+typedef struct ioc_fm_pcd_manip_reassem_capwap_stats_t {
+ uint32_t timeout;
+ /**< Counts the number of timeout occurrences */
+ uint32_t rfd_pool_busy;
+ /**< Counts the number of failed attempts to allocate a
+ * Reassembly Frame Descriptor
+ */
+ uint32_t internal_buffer_busy;
+ /**< Counts the number of times an internal buffer busy
+ * occurred
+ */
+ uint32_t external_buffer_busy;
+ /**< Counts the number of times external buffer busy
+ * occurred
+ */
+ uint32_t sg_fragments;
+ /**< Counts the number of Scatter/Gather fragments */
+ uint32_t dma_semaphore_depletion;
+ /**< Counts the number of failed attempts to allocate a
+ * DMA semaphore
+ */
+ uint32_t successfully_reassembled;
+ /**< Counts the number of successfully reassembled
+ * frames
+ */
+ uint32_t valid_fragments;
+ /**< Counts the total number of valid fragments that
+ * have been processed for all frames
+ */
+ uint32_t processed_fragments;
+ /**< Counts the number of processed fragments (valid and
+ * error fragments) for all frames
+ */
+ uint32_t malformed_fragments;
+ /**< Counts the number of malformed fragments processed
+ * for all frames
+ */
+ uint32_t auto_learn_busy;
+ /**< Counts the number of times a busy condition occurs
+ * when attempting to access an Reassembly Automatic
+ * Learning Hash set
+ */
+ uint32_t discarded_fragments;
+ /**< Counts the number of fragments discarded by the
+ * reassembly process
+ */
+ uint32_t more_than16fragments;
+ /**< Counts the fragment occurrences in which the number
+ * of fragments-per-frame exceeds 16
+ */
+ uint32_t exceed_max_reassembly_frame_len;
+ /**< ounts the number of times that a successful
+ * reassembled frame length exceeds
+ * MaxReassembledFrameLength value
+ */
+} ioc_fm_pcd_manip_reassem_capwap_stats_t;
+
+/*
+ * @Description Structure for retrieving CAPWAP fragmentation statistics
+ */
+typedef struct ioc_fm_pcd_manip_frag_capwap_stats_t {
+ uint32_t total_frames;
+ /**< Number of frames that passed through the
+ * manipulation node
+ */
+ uint32_t fragmented_frames;
+ /**< Number of frames that were fragmented */
+ uint32_t generated_fragments;
+ /**< Number of fragments that were generated */
+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
+ uint8_t sg_allocation_failure;
+ /**< Number of allocation failure of s/g buffers */
+#endif /* (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) */
+} ioc_fm_pcd_manip_frag_capwap_stats_t;
+#endif /* (DPAA_VERSION >= 11) */
+
+/*
+ * @Description Structure for retrieving reassembly statistics
+ */
+typedef struct ioc_fm_pcd_manip_reassem_stats_t {
+ union {
+ ioc_fm_pcd_manip_reassem_ip_stats_t ip_reassem;
+ /**< Structure for IP reassembly statistics */
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_reassem_capwap_stats_t capwap_reassem;
+ /**< Structure for CAPWAP reassembly statistics */
+#endif /* (DPAA_VERSION >= 11) */
+ } u;
+} ioc_fm_pcd_manip_reassem_stats_t;
+
+/*
+ * @Description structure for retrieving fragmentation statistics
+ */
+typedef struct ioc_fm_pcd_manip_frag_stats_t {
+ union {
+ ioc_fm_pcd_manip_frag_ip_stats_t ip_frag;
+ /**< Structure for IP fragmentation statistics */
+#if (DPAA_VERSION >= 11)
+ ioc_fm_pcd_manip_frag_capwap_stats_t capwap_frag;
+ /**< Structure for CAPWAP fragmentation statistics */
+#endif /* (DPAA_VERSION >= 11) */
+ } u;
+} ioc_fm_pcd_manip_frag_stats_t;
+
+/*
+ * @Description structure for defining manipulation statistics
+ */
+typedef struct ioc_fm_pcd_manip_stats_t {
+ union {
+ ioc_fm_pcd_manip_reassem_stats_t reassem;
+ /**< Structure for reassembly statistics */
+ ioc_fm_pcd_manip_frag_stats_t frag;
+ /**< Structure for fragmentation statistics */
+ } u;
+} ioc_fm_pcd_manip_stats_t;
+
+/*
+ * @Description Parameters for acquiring manipulation statistics
+ */
+typedef struct ioc_fm_pcd_manip_get_stats_t {
+ void *id;
+ ioc_fm_pcd_manip_stats_t stats;
+} ioc_fm_pcd_manip_get_stats_t;
+
+#if DPAA_VERSION >= 11
+/*
+ * @Description Parameters for defining frame replicator group and its members
+ */
+struct fm_pcd_frm_replic_group_params_t {
+ uint8_t max_num_of_entries;
+ /**< Maximal number of members in the group -
+ * must be at least two
+ */
+ uint8_t num_of_entries;
+ /**< Number of members in the group - must be at
+ * least 1
+ */
+ ioc_fm_pcd_cc_next_engine_params_t
+ next_engine_params[IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES];
+ /**< Array of members' parameters */
+};
+
+typedef struct ioc_fm_pcd_frm_replic_group_params_t {
+ struct fm_pcd_frm_replic_group_params_t param;
+ void *id;
+} ioc_fm_pcd_frm_replic_group_params_t;
+
+typedef struct ioc_fm_pcd_frm_replic_member_t {
+ void *h_replic_group;
+ uint16_t member_index;
+} ioc_fm_pcd_frm_replic_member_t;
+
+typedef struct ioc_fm_pcd_frm_replic_member_params_t {
+ ioc_fm_pcd_frm_replic_member_t member;
+ ioc_fm_pcd_cc_next_engine_params_t next_engine_params;
+} ioc_fm_pcd_frm_replic_member_params_t;
+#endif /* DPAA_VERSION >= 11 */
+
+
+typedef struct ioc_fm_pcd_cc_key_statistics_t {
+ uint32_t byte_count;
+ /**< This counter reflects byte count of frames that
+ * were matched by this key.
+ */
+ uint32_t frame_count;
+ /**< This counter reflects count of frames that were
+ * matched by this key.
+ */
+#if (DPAA_VERSION >= 11)
+ uint32_t frame_length_range_count[IOC_FM_PCD_CC_STATS_MAX_FLR];
+ /**< These counters reflect how many frames matched this
+ * key in 'RMON' statistics mode: Each counter holds the
+ * number of frames of a specific frames length range,
+ * according to the ranges provided at initialization.
+ */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_pcd_cc_key_statistics_t;
+
+
+typedef struct ioc_fm_pcd_cc_tbl_get_stats_t {
+ void *id;
+ uint16_t key_index;
+ ioc_fm_pcd_cc_key_statistics_t statistics;
+} ioc_fm_pcd_cc_tbl_get_stats_t;
+
+/*
+ * @Function fm_pcd_match_table_get_key_statistics
+ *
+ * @Description This routine may be used to get statistics counters of
+ * specific key in a CC Node.
+ *
+ * If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ * 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ * node, these counters reflect how many frames passed that were
+ * matched this key; The total frames count will be returned in
+ * the counter of the first range (as only one frame length range
+ * was defined). If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for
+ * this node, the total frame count will be separated to frame
+ * length counters, based on provided frame length ranges.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_index Key index for adding
+ * @Param[out] p_key_statistics Key statistics counters
+ *
+ * @Return The specific key statistics.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set().
+ */
+
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), \
+ ioc_compat_fm_pcd_cc_tbl_get_stats_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), \
+ ioc_fm_pcd_cc_tbl_get_stats_t)
+
+/*
+ * @Function fm_pcd_match_table_get_miss_statistics
+ *
+ * @Description This routine may be used to get statistics counters of miss
+ * entry in a CC Node.
+ *
+ * If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ * 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ * node, these counters reflect how many frames were not matched
+ * to any existing key and therefore passed through the miss
+ * entry; The total frames count will be returned in the counter
+ * of the first range (as only one frame length range was
+ * defined).
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[out] p_miss_statistics Statistics counters for 'miss'
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set().
+ */
+
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), \
+ ioc_compat_fm_pcd_cc_tbl_get_stats_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), \
+ ioc_fm_pcd_cc_tbl_get_stats_t)
+
+/*
+ * @Function fm_pcd_hash_table_get_miss_statistics
+ *
+ * @Description This routine may be used to get statistics counters of 'miss'
+ * entry of the a hash table.
+ *
+ * If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ * 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ * node, these counters reflect how many frames were not matched
+ * to any existing key and therefore passed through the miss
+ * entry;
+ *
+ * @Param[in] h_hash_tbl A handle to a hash table
+ * @Param[out] p_miss_statistics Statistics counters for 'miss'
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), \
+ ioc_compat_fm_pcd_cc_tbl_get_stats_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), \
+ ioc_fm_pcd_cc_tbl_get_stats_t)
+
+/*
+ * @Function fm_pcd_net_env_characteristics_set
+ *
+ * @Description Define a set of Network Environment Characteristics.
+ *
+ * When setting an environment it is important to understand its
+ * application. It is not meant to describe the flows that will
+ * run on the ports using this environment, but what the user
+ * means TO DO with the PCD mechanisms in order to
+ * parse-classify-distribute those frames.
+ * By specifying a distinction unit, the user means it would use
+ * that option for distinction between frames at either a KeyGen
+ * scheme or a coarse classification action descriptor. Using
+ * interchangeable headers to define a unit means that the user
+ * is indifferent to which of the interchangeable headers is
+ * present in the frame, and wants the distinction to be based on
+ * the presence of either one of them.
+ *
+ * Depending on context, there are limitations to the use of
+ * environments. A port using the PCD functionality is bound to
+ * an environment. Some or even all ports may share an
+ * environment but also an environment per port is possible. When
+ * initializing a scheme, a classification plan group (see
+ * below), or a coarse classification tree, one of the
+ * initialized environments must be stated and related to. When a
+ * port is bound to a scheme, a classification plan group, or a
+ * coarse classification tree, it MUST be bound to the same
+ * environment.
+ *
+ * The different PCD modules, may relate (for flows definition)
+ * ONLY on distinction units as defined by their environment.
+ * When initializing a scheme for example, it may not choose to
+ * select IPV4 as a match for recognizing flows unless it was
+ * defined in the relating environment. In fact, to guide the
+ * user through the configuration of the PCD, each module's
+ * characterization in terms of flows is not done using protocol
+ * names, but using environment indexes.
+ *
+ * In terms of HW implementation, the list of distinction units
+ * sets the LCV vectors and later used for match vector,
+ * classification plan vectors and coarse classification
+ * indexing.
+ *
+ * @Param[in,out] ioc_fm_pcd_net_env_params_t A structure defining the
+ * distinction units for this
+ * configuration.
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), \
+ ioc_compat_fm_pcd_net_env_params_t)
+#endif
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), \
+ ioc_fm_pcd_net_env_params_t)
+
+/*
+ * @Function fm_pcd_net_env_characteristics_delete
+ *
+ * @Description Deletes a set of Network Environment Charecteristics.
+ *
+ * @Param[in] ioc_fm_obj_t The id of a Network Environment object.
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_fm_obj_t)
+
+/*
+ * @Function fm_pcd_kg_scheme_set
+ *
+ * @Description Initializing or modifying and enabling a scheme for the
+ * KeyGen. This routine should be called for adding or modifying
+ * a scheme. When a scheme needs modifying, the API requires that
+ * it will be rewritten. In such a case 'modify' should be TRUE.
+ * If the routine is called for a valid scheme and 'modify' is
+ * FALSE, it will return error.
+ *
+ * @Param[in,out] ioc_fm_pcd_kg_scheme_params_t A structure of
+ * parameters for defining
+ * the scheme
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_KG_SCHEME_SET_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), \
+ ioc_compat_fm_pcd_kg_scheme_params_t)
+#endif
+#define FM_PCD_IOC_KG_SCHEME_SET \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), \
+ ioc_fm_pcd_kg_scheme_params_t)
+
+/*
+ * @Function fm_pcd_kg_scheme_delete
+ *
+ * @Description Deleting an initialized scheme.
+ *
+ * @Param[in] ioc_fm_obj_t scheme id as initialized by application at
+ * FM_PCD_IOC_KG_SET_SCHEME
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_KG_SCHEME_DELETE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_KG_SCHEME_DELETE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_fm_obj_t)
+
+/*
+ * @Function fm_pcd_cc_root_build
+ *
+ * @Description This routine must be called to define a complete coarse
+ * classification tree. This is the way to define coarse
+ * classification to a certain flow - the KeyGen schemes may
+ * point only to trees defined in this way.
+ *
+ * @Param[in,out] ioc_fm_pcd_cc_tree_params_t A structure of parameters to
+ * define the tree.
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_CC_ROOT_BUILD_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), compat_uptr_t)
+#endif
+#define FM_PCD_IOC_CC_ROOT_BUILD \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), void *)
+ /* workaround ...*/
+
+/*
+ * @Function fm_pcd_cc_root_delete
+ *
+ * @Description Deleting a built tree.
+ *
+ * @Param[in] ioc_fm_obj_t - The id of a CC tree.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_CC_ROOT_DELETE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_CC_ROOT_DELETE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_fm_obj_t)
+
+/*
+ * @Function fm_pcd_match_table_set
+ *
+ * @Description This routine should be called for each CC (coarse
+ * classification) node. The whole CC tree should be built bottom
+ * up so that each node points to already defined nodes. p_NodeId
+ * returns the node Id to be used by other nodes.
+ *
+ * @Param[in,out] ioc_fm_pcd_cc_node_params_t A structure for defining the CC
+ * node params
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_SET_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), compat_uptr_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_SET \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), void *)
+ /* workaround ...*/
+
+/*
+ * @Function fm_pcd_match_table_delete
+ *
+ * @Description Deleting a built node.
+ *
+ * @Param[in] ioc_fm_obj_t - The id of a CC node.
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_DELETE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_DELETE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_fm_obj_t)
+
+/*
+ * @Function fm_pcd_cc_root_modify_next_engine
+ *
+ * @Description Modify the Next Engine Parameters in the entry of the tree.
+ *
+ * @Param[in] ioc_fm_pcd_cc_tree_modify_next_engine_params_t
+ * Pointer to a structure with the relevant parameters
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_cc_root_build().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), \
+ ioc_compat_fm_pcd_cc_tree_modify_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), \
+ ioc_fm_pcd_cc_tree_modify_next_engine_params_t)
+
+/*
+ * @Function fm_pcd_match_table_modify_next_engine
+ *
+ * @Description Modify the Next Engine Parameters in the relevant key entry of
+ * the node.
+ *
+ * @Param[in] ioc_fm_pcd_cc_node_modify_next_engine_params_t
+ * A pointer to a structure with the relevant parameters
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), \
+ ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), \
+ ioc_fm_pcd_cc_node_modify_next_engine_params_t)
+
+/*
+ * @Function fm_pcd_match_table_modify_miss_next_engine
+ *
+ * @Description Modify the Next Engine Parameters of the Miss key case of the
+ * node.
+ *
+ * @Param[in] ioc_fm_pcd_cc_node_modify_next_engine_params_t
+ * Pointer to a structure with the relevant parameters
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), \
+ ioc_compat_fm_pcd_cc_node_modify_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), \
+ ioc_fm_pcd_cc_node_modify_next_engine_params_t)
+
+/*
+ * @Function fm_pcd_match_table_remove_key
+ *
+ * @Description Remove the key (including next engine parameters of this key)
+ * defined by the index of the relevant node.
+ *
+ * @Param[in] ioc_fm_pcd_cc_node_remove_key_params_t
+ * A pointer to a structure with the relevant parameters
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only after fm_pcd_match_table_set() has been called
+ * for this node and for all of the nodes that lead to it.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), \
+ ioc_compat_fm_pcd_cc_node_remove_key_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), \
+ ioc_fm_pcd_cc_node_remove_key_params_t)
+
+/*
+ * @Function fm_pcd_match_table_add_key
+ *
+ * @Description Add the key (including next engine parameters of this key in
+ * the index defined by the key_index. Note that
+ * 'FM_PCD_LAST_KEY_INDEX' may be used when the user doesn't care
+ * about the position of the key in the table - in that case, the
+ * key will be automatically added by the driver in the last
+ * available entry.
+ *
+ * @Param[in] ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t
+ * A pointer to a structure with the relevant parameters
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only after fm_pcd_match_table_set() has been called
+ * for this node and for all of the nodes that lead to it.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_ADD_KEY_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), \
+ ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_ADD_KEY \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), \
+ ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+
+/*
+ * @Function fm_pcd_match_table_modify_key_and_next_engine
+ *
+ * @Description Modify the key and Next Engine Parameters of this key in the
+ * index defined by key_index.
+ *
+ * @Param[in] ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t
+ * A pointer to a structure with the relevant parameters
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set() not only of
+ * the relevnt node but also the node that points to this node.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), \
+ ioc_compat_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), \
+ ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+
+/*
+ * @Function fm_pcd_match_table_modify_key
+ *
+ * @Description Modify the key at the index defined by key_index.
+ *
+ * @Param[in] ioc_fm_pcd_cc_node_modify_key_params_t - Pointer to a
+ * structure with the relevant parameters
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only after fm_pcd_match_table_set() has been called
+ * for this node and for all of the nodes that lead to it.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), \
+ ioc_compat_fm_pcd_cc_node_modify_key_params_t)
+#endif
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), \
+ ioc_fm_pcd_cc_node_modify_key_params_t)
+
+/*
+ * @Function fm_pcd_hash_table_set
+ *
+ * @Description This routine initializes a hash table structure.
+ * KeyGen hash result determines the hash bucket.
+ * Next, KeyGen key is compared against all keys of this bucket
+ * (exact match).
+ * Number of sets (number of buckets) of the hash equals to the
+ * number of 1-s in 'hash_res_mask' in the provided parameters.
+ * Number of hash table ways is then calculated by dividing
+ * 'max_num_of_keys' equally between the hash sets. This is the
+ * maximal number of keys that a hash bucket may hold.
+ * The hash table is initialized empty and keys may be added to
+ * it following the initialization. Keys masks are not supported
+ * in current hash table implementation. The initialized hash
+ * table can be integrated as a node in a CC tree.
+ *
+ * @Param[in,out] ioc_fm_pcd_hash_table_params_t Pointer to a structure
+ * with the relevant
+ * parameters.
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_SET_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), \
+ ioc_compat_fm_pcd_hash_table_params_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_SET \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), \
+ ioc_fm_pcd_hash_table_params_t)
+
+/*
+ * @Function fm_pcd_hash_table_delete
+ *
+ * @Description This routine deletes the provided hash table and released all
+ * its allocated resources.
+ *
+ * @Param[in] ioc_fm_obj_t The ID of a hash table.
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_DELETE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_DELETE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_obj_t)
+
+/*
+ * @Function fm_pcd_hash_table_add_key
+ *
+ * @Description This routine adds the provided key (including next engine
+ * parameters of this key) to the hash table.
+ * The key is added as the last key of the bucket that it is
+ * mapped to.
+ *
+ * @Param[in] ioc_fm_pcd_hash_table_add_key_params_t
+ * Pointer to a structure with the relevant parameters
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_ADD_KEY_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), \
+ ioc_compat_fm_pcd_hash_table_add_key_params_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_ADD_KEY \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), \
+ ioc_fm_pcd_hash_table_add_key_params_t)
+
+/*
+ * @Function fm_pcd_hash_table_remove_key
+ *
+ * @Description This routine removes the requested key (including next engine
+ * parameters of this key) from the hash table.
+ *
+ * @Param[in] ioc_fm_pcd_hash_table_remove_key_params_t - Pointer to a
+ * structure with the relevant parameters
+ *
+ * @Return 0 on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), \
+ ioc_compat_fm_pcd_hash_table_remove_key_params_t)
+#endif
+#define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), \
+ ioc_fm_pcd_hash_table_remove_key_params_t)
+
+/*
+ * @Function fm_pcd_plcr_profile_set
+ *
+ * @Description Sets a profile entry in the policer profile table.
+ * The routine overrides any existing value.
+ *
+ * @Param[in,out] ioc_fm_pcd_plcr_profile_params_t A structure of
+ * parameters for defining
+ * a policer profile entry.
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_PLCR_PROFILE_SET_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), \
+ ioc_compat_fm_pcd_plcr_profile_params_t)
+#endif
+#define FM_PCD_IOC_PLCR_PROFILE_SET \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), \
+ ioc_fm_pcd_plcr_profile_params_t)
+
+/*
+ * @Function fm_pcd_plcr_profile_delete
+ *
+ * @Description Delete a profile entry in the policer profile table.
+ * The routine set entry to invalid.
+ *
+ * @Param[in] ioc_fm_obj_t The id of a policer profile.
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_PLCR_PROFILE_DELETE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_PLCR_PROFILE_DELETE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_obj_t)
+
+/*
+ * @Function fm_pcd_manip_node_set
+ *
+ * @Description This routine should be called for defining a manipulation
+ * node. A manipulation node must be defined before the CC node
+ * that precedes it.
+ *
+ * @Param[in] ioc_fm_pcd_manip_params_t A structure of parameters
+ * defining the manipulation.
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MANIP_NODE_SET_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), \
+ ioc_compat_fm_pcd_manip_params_t)
+#endif
+#define FM_PCD_IOC_MANIP_NODE_SET \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), \
+ ioc_fm_pcd_manip_params_t)
+
+/*
+ * @Function fm_pcd_manip_node_replace
+ *
+ * @Description Change existing manipulation node to be according to new
+ * requirement. (Here, it's implemented as a variant of the same
+ * IOCTL as for fm_pcd_manip_node_set(), and one that when
+ * called, the 'id' member in its 'ioc_fm_pcd_manip_params_t'
+ * argument is set to contain the manip node's handle)
+ *
+ * @Param[in] ioc_fm_pcd_manip_params_t A structure of parameters
+ * defining the manipulation.
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_manip_node_set().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MANIP_NODE_REPLACE_COMPAT FM_PCD_IOC_MANIP_NODE_SET_COMPAT
+#endif
+#define FM_PCD_IOC_MANIP_NODE_REPLACE FM_PCD_IOC_MANIP_NODE_SET
+
+/*
+ * @Function fm_pcd_manip_node_delete
+ *
+ * @Description Delete an existing manipulation node.
+ *
+ * @Param[in] ioc_fm_obj_t The id of the manipulation node to delete.
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_manip_node_set().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MANIP_NODE_DELETE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_MANIP_NODE_DELETE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_fm_obj_t)
+
+/*
+ * @Function fm_pcd_manip_get_statistics
+ *
+ * @Description Retrieve the manipulation statistics.
+ *
+ * @Param[in] h_manip_node A handle to a manipulation node.
+ * @Param[out] p_fm_pcd_manip_stats A structure for retrieving the
+ * manipulation statistics.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_manip_node_set().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_MANIP_GET_STATS_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), \
+ ioc_compat_fm_pcd_manip_get_stats_t)
+#endif
+#define FM_PCD_IOC_MANIP_GET_STATS \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), \
+ ioc_fm_pcd_manip_get_stats_t)
+
+/*
+ * @Function fm_pcd_set_advanced_offload_support
+ *
+ * @Description This routine must be called in order to support the following
+ * features: IP-fragmentation, IP-reassembly, IPsec,
+ * Header-manipulation, frame-replicator.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed only when PCD is disabled.
+ */
+#define FM_PCD_IOC_SET_ADVANCED_OFFLOAD_SUPPORT \
+ _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45))
+
+#if (DPAA_VERSION >= 11)
+/*
+ * @Function fm_pcd_frm_replic_set_group
+ *
+ * @Description Initialize a Frame Replicator group.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] p_frm_replic_group_param A structure of parameters for
+ * the initialization of the frame
+ * replicator group.
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_SET_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), \
+ ioc_compat_fm_pcd_frm_replic_group_params_t)
+#endif
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_SET \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), \
+ ioc_fm_pcd_frm_replic_group_params_t)
+
+/*
+ * @Function fm_pcd_frm_replic_delete_group
+ *
+ * @Description Delete a Frame Replicator group.
+ *
+ * @Param[in] h_frm_replic_group A handle to the frame replicator group.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_frm_replic_set_group().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_compat_fm_obj_t)
+#endif
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_fm_obj_t)
+
+/*
+ * @Function fm_pcd_frm_replic_add_member
+ *
+ * @Description Add the member in the index defined by the member_index.
+ *
+ * @Param[in] h_frm_replic_group A handle to the frame replicator group.
+ * @Param[in] member_index Member index for adding.
+ * @Param[in] p_member_params A pointer to the new member parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_frm_replic_set_group() of this
+ * group.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), \
+ ioc_compat_fm_pcd_frm_replic_member_params_t)
+#endif
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), \
+ ioc_fm_pcd_frm_replic_member_params_t)
+
+/*
+ * @Function fm_pcd_frm_replic_remove_member
+ *
+ * @Description Remove the member defined by the index from the relevant group
+ *
+ * @Param[in] h_frm_replic_group A handle to the frame replicator group.
+ * @Param[in] member_index Member index for removing.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_frm_replic_set_group() of this
+ * group.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), \
+ ioc_compat_fm_pcd_frm_replic_member_t)
+#endif
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), \
+ ioc_fm_pcd_frm_replic_member_t)
+
+#endif
+
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+/*
+ * @Function fm_pcd_statistics_set_node
+ *
+ * @Description This routine should be called for defining a statistics node.
+ *
+ * @Param[in,out] ioc_fm_pcd_stats_params_t A structure of parameters defining
+ * the statistics
+ *
+ * @Return 0 on success; Error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PCD_IOC_STATISTICS_SET_NODE_COMPAT \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *)
+#endif
+#define FM_PCD_IOC_STATISTICS_SET_NODE \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45), void *)
+
+#endif /* FM_CAPWAP_SUPPORT */
+
+/*
+ * @Group FM_grp Frame Manager API
+ *
+ * @Description Frame Manager Application Programming Interface
+ *
+ * @{
+ */
+
+/*
+ * @Group FM_PCD_grp FM PCD
+ *
+ * @Description Frame Manager PCD (Parse-Classify-Distribute) API.
+ *
+ * The FM PCD module is responsible for the initialization of all
+ * global classifying FM modules. This includes the parser
+ * general and common registers, the key generator global and
+ * common registers, and the policer global and common registers.
+ * In addition, the FM PCD SW module will initialize all required
+ * key generator schemes, coarse classification flows, and
+ * policer profiles. When FM module is configured to work with
+ * one of these entities, it will register to it using the FM
+ * PORT API. The PCD module will manage the PCD resources - i.e.
+ * resource management of KeyGen schemes, etc.
+ *
+ * @{
+ */
+
+/*
+ * @Collection General PCD defines
+ */
+#define FM_PCD_MAX_NUM_OF_PRIVATE_HDRS 2
+/**< Number of units/headers saved for user */
+
+#define FM_PCD_PRS_NUM_OF_HDRS 16
+/**< Number of headers supported by HW parser */
+#define FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS \
+ (32 - FM_PCD_MAX_NUM_OF_PRIVATE_HDRS)
+/**< Number of distinction units is limited by register size (32 bits) minus
+ *reserved bits for private headers.
+ */
+#define FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS 4
+/**< Maximum number of interchangeable headers in a distinction unit */
+#define FM_PCD_KG_NUM_OF_GENERIC_REGS FM_KG_NUM_OF_GENERIC_REGS
+/**< Total number of generic KeyGen registers */
+#define FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY 35
+/**< Max number allowed on any configuration; For HW implementation reasons, in
+ * most cases less than this will be allowed; The driver will return an
+ * initialization error if resource is unavailable.
+ */
+#define FM_PCD_KG_NUM_OF_EXTRACT_MASKS 4
+/**< Total number of masks allowed on KeyGen extractions. */
+#define FM_PCD_KG_NUM_OF_DEFAULT_GROUPS 16
+/**< Number of default value logical groups */
+
+#define FM_PCD_PRS_NUM_OF_LABELS 32
+/**< Maximum number of SW parser labels */
+#define FM_SW_PRS_MAX_IMAGE_SIZE \
+ (FM_PCD_SW_PRS_SIZE \
+ /*- FM_PCD_PRS_SW_OFFSET -FM_PCD_PRS_SW_TAIL_SIZE*/ \
+ - FM_PCD_PRS_SW_PATCHES_SIZE)
+/**< Maximum size of SW parser code */
+
+#define FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE 128
+/**< Maximum size of insertion template for insert manipulation */
+
+#if (DPAA_VERSION >= 11)
+#define FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES 64
+/**< Maximum possible entries for frame replicator group */
+#endif /* (DPAA_VERSION >= 11) */
+/* @} */
+
+/*
+ * @Group FM_PCD_init_grp FM PCD Initialization Unit
+ *
+ * @Description Frame Manager PCD Initialization Unit API
+ *
+ * @{
+ */
+
+/*
+ * @Description Exceptions user callback routine, will be called upon an
+ * exception passing the exception identification.
+ *
+ * @Param[in] h_app User's application descriptor.
+ * @Param[in] exception The exception.
+ */
+typedef void (t_fm_pcd_exception_callback) (t_handle h_app,
+ ioc_fm_pcd_exceptions exception);
+
+/*
+ * @Description Exceptions user callback routine, will be called upon an
+ * exception passing the exception identification.
+ *
+ * @Param[in] h_app User's application descriptor.
+ * @Param[in] exception The exception.
+ * @Param[in] index id of the relevant source (may be scheme or
+ * profile id).
+ */
+typedef void (t_fm_pcd_id_exception_callback) (t_handle h_app,
+ ioc_fm_pcd_exceptions exception,
+ uint16_t index);
+
+/*
+ * @Description A callback for enqueuing frame onto a QM queue.
+ *
+ * @Param[in] h_qm_arg Application's handle passed to QM module on
+ * enqueue.
+ * @Param[in] p_fd Frame descriptor for the frame.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+typedef uint32_t (t_fm_pcd_qm_enqueue_callback) (t_handle h_qm_arg, void *p_fd);
+
+/*
+ * @Description Host-Command parameters structure.
+ *
+ * When using Host command for PCD functionalities, a dedicated
+ * port must be used. If this routine is called for a PCD in a
+ * single partition environment, or it is the Master partition in
+ * a Multi-partition environment, The port will be initialized by
+ * the PCD driver initialization routine.
+ */
+typedef struct t_fm_pcd_hc_params {
+ uintptr_t port_base_addr;
+ /**< Virtual Address of Host-Command Port memory mapped registers.*/
+ uint8_t port_id;
+ /**< Port Id (0-6 relative to Host-Command/Offline-Parsing ports);
+ * NOTE: When configuring Host Command port for FMANv3 devices
+ * (DPAA_VERSION 11 and higher), port_id=0 MUST be used.
+ */
+ uint16_t liodn_base;
+ /**< LIODN base for this port, to be used together with LIODN offset
+ * (irrelevant for P4080 revision 1.0)
+ */
+ uint32_t err_fqid;
+ /**< Host-Command Port error queue Id. */
+ uint32_t conf_fqid;
+ /**< Host-Command Port confirmation queue Id. */
+ uint32_t qm_channel;
+ /**< QM channel dedicated to this Host-Command port; will be used by the
+ * FM for dequeue.
+ */
+ t_fm_pcd_qm_enqueue_callback *f_qm_enqueue;
+ /**< Callback routine for enqueuing a frame to the QM */
+ t_handle h_qm_arg;
+ /**< Application's handle passed to QM module on enqueue */
+} t_fm_pcd_hc_params;
+
+/*
+ * @Description The main structure for PCD initialization
+ */
+typedef struct t_fm_pcd_params {
+ bool prs_support;
+ /**< TRUE if Parser will be used for any of the FM ports. */
+ bool cc_support;
+ /**< TRUE if Coarse Classification will be used for any of the FM ports.
+ */
+ bool kg_support;
+ /**< TRUE if KeyGen will be used for any of the FM ports. */
+ bool plcr_support;
+ /**< TRUE if Policer will be used for any of the FM ports. */
+ t_handle h_fm;
+ /**< A handle to the FM module. */
+ uint8_t num_schemes;
+ /**< Number of schemes dedicated to this partition.
+ * this parameter is relevant if 'kg_support'=TRUE.
+ */
+ bool use_host_command;
+ /**< Optional for single partition, Mandatory for Multi partition */
+ t_fm_pcd_hc_params hc;
+ /**< Host Command parameters, relevant only if 'use_host_command'=TRUE;
+ * Relevant when FM not runs in "guest-mode".
+ */
+ t_fm_pcd_exception_callback *f_exception;
+ /**< Callback routine for general PCD exceptions; Relevant when FM not
+ * runs in "guest-mode".
+ */
+ t_fm_pcd_id_exception_callback *f_exception_id;
+ /**< Callback routine for specific KeyGen scheme or Policer profile
+ * exceptions; Relevant when FM not runs in "guest-mode".
+ */
+ t_handle h_app;
+ /**< A handle to an application layer object; This handle will be passed
+ * by the driver upon calling the above callbacks; Relevant when FM not
+ * runs in "guest-mode".
+ */
+ uint8_t part_plcr_profiles_base;
+ /**< The first policer-profile-id dedicated to this partition. this
+ * parameter is relevant if 'plcr_support'=TRUE. NOTE: this parameter
+ * relevant only when working with multiple partitions.
+ */
+ uint16_t part_num_of_plcr_profiles;
+ /**< Number of policer-profiles dedicated to this partition. This
+ * parameter is relevant if 'plcr_support'=TRUE. NOTE: this parameter
+ * relevant only when working with multiple partitions.
+ */
+} t_fm_pcd_params;
+
+typedef struct t_fm_pcd_prs_label_params {
+ uint32_t instruction_offset;
+ ioc_net_header_type hdr;
+ uint8_t index_per_hdr;
+} t_fm_pcd_prs_label_params;
+
+typedef struct t_fm_pcd_prs_sw_params {
+ bool override;
+ uint32_t size;
+ uint16_t base;
+ uint8_t *p_code;
+ uint32_t sw_prs_data_params[FM_PCD_PRS_NUM_OF_HDRS];
+ uint8_t num_of_labels;
+ t_fm_pcd_prs_label_params labels_table[FM_PCD_PRS_NUM_OF_LABELS];
+} t_fm_pcd_prs_sw_params;
+
+/*
+ * @Function fm_pcd_config
+ *
+ * @Description Basic configuration of the PCD module.
+ * Creates descriptor for the FM PCD module.
+ *
+ * @Param[in] p_fm_pcd_params A structure of parameters for the
+ initialization of PCD.
+ *
+ * @Return A handle to the initialized module.
+ */
+t_handle fm_pcd_config(t_fm_pcd_params *p_fm_pcd_params);
+
+/*
+ * @Function fm_pcd_init
+ *
+ * @Description Initialization of the PCD module.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+uint32_t fm_pcd_init(t_handle h_fm_pcd);
+
+/*
+ * @Function fm_pcd_free
+ *
+ * @Description Frees all resources that were assigned to FM module.
+ * Calling this routine invalidates the descriptor.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+uint32_t fm_pcd_free(t_handle h_fm_pcd);
+
+/*
+ * @Group FM_PCD_advanced_cfg_grp FM PCD Advanced Configuration
+ * Unit
+ *
+ * @Description Frame Manager PCD Advanced Configuration API.
+ *
+ * @{
+ */
+
+/*
+ * @Function fm_pcd_config_exception
+ *
+ * @Description Calling this routine changes the internal driver data base
+ * from its default selection of exceptions enabling.
+ * [DEFAULT_num_of_shared_plcr_profiles].
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] exception The exception to be selected.
+ * @Param[in] enable TRUE to enable interrupt, FALSE to mask it.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions This routine should NOT be called from guest-partition (i.e.
+ * guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_config_exception(t_handle h_fm_pcd,
+ ioc_fm_pcd_exceptions exception, bool enable);
+
+/*
+ * @Function fm_pcd_config_hc_frames_data_memory
+ *
+ * @Description Configures memory-partition-id for FMan-Controller
+ * Host-Command frames. Calling this routine changes the internal
+ * driver data base from its default configuration [0].
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] mem_id Memory partition ID.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions This routine may be called only if 'use_host_command' was TRUE
+ * when fm_pcd_config() routine was called.
+ */
+uint32_t fm_pcd_config_hc_frames_data_memory(t_handle h_fm_pcd, uint8_t mem_id);
+
+/*
+ * @Function fm_pcd_config_plcr_num_of_shared_profiles
+ *
+ * @Description Calling this routine changes the internal driver data base
+ * from its default selection of exceptions enablement.
+ * [DEFAULT_num_of_shared_plcr_profiles].
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] num_of_shared_plcr_profiles Number of profiles to be shared
+ * between ports on this partition
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+uint32_t fm_pcd_config_plcr_num_of_shared_profiles(t_handle h_fm_pcd,
+ uint16_t num_of_shared_plcr_profiles);
+
+/*
+ * @Function fm_pcd_config_plcr_auto_refresh_mode
+ *
+ * @Description Calling this routine changes the internal driver data base
+ * from its default selection of exceptions enablement. By
+ * default auto-refresh is [DEFAULT_plcrAutoRefresh].
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] enable TRUE to enable, FALSE to disable
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_config_plcr_auto_refresh_mode(t_handle h_fm_pcd, bool enable);
+
+/*
+ * @Function fm_pcd_config_prs_max_cycle_limit
+ *
+ * @Description Calling this routine changes the internal data structure for
+ * the maximum parsing time from its default value
+ * [DEFAULT_MAX_PRS_CYC_LIM].
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] value 0 to disable the mechanism, or new maximum
+ * parsing time.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_config_prs_max_cycle_limit(t_handle h_fm_pcd, uint16_t value);
+
+/** @} */ /* end of FM_PCD_advanced_cfg_grp group */
+/** @} */ /* end of FM_PCD_init_grp group */
+
+/*
+ * @Group FM_PCD_Runtime_grp FM PCD Runtime Unit
+ *
+ * @Description Frame Manager PCD Runtime Unit API
+ *
+ * The runtime control allows creation of PCD infrastructure
+ * modules such as Network Environment Characteristics,
+ * Classification Plan Groups and Coarse Classification Trees.
+ * It also allows on-the-fly initialization, modification and
+ * removal of PCD modules such as KeyGen schemes, coarse
+ * classification nodes and Policer profiles.
+ *
+ * In order to explain the programming model of the PCD driver
+ * interface a few terms should be explained, and will be used
+ * below.
+ * - Distinction Header - One of the 16 protocols supported by
+ * the FM parser, or one of the SHIM headers (1 or 2). May be a
+ * header with a special option (see below).
+ * - Interchangeable Headers Group - This is a group of Headers
+ * recognized by either one of them. For example, if in a
+ * specific context the user chooses to treat IPv4 and IPV6 in
+ * the same way, they may create an interchangeable Headers
+ * Unit consisting of these 2 headers.
+ * - A Distinction Unit - a Distinction Header or an
+ * Interchangeable Headers Group.
+ * - Header with special option - applies to Ethernet, MPLS,
+ * VLAN, IPv4 and IPv6, includes multicast, broadcast and other
+ * protocol specific options. In terms of hardware it relates
+ * to the options available in the classification plan.
+ * - Network Environment Characteristics - a set of Distinction
+ * Units that define the total recognizable header selection
+ * for a certain environment. This is NOT the list of all
+ * headers that will ever appear in a flow, but rather
+ * everything that needs distinction in a flow, where
+ * distinction is made by KeyGen schemes and coarse
+ * classification action descriptors.
+ *
+ * The PCD runtime modules initialization is done in stages. The
+ * first stage after initializing the PCD module itself is to
+ * establish a Network Flows Environment Definition. The
+ * application may choose to establish one or more such
+ * environments. Later, when needed, the application will have to
+ * state, for some of its modules, to which single environment it
+ * belongs.
+ *
+ * @{
+ */
+
+t_handle fm_pcd_open(t_fm_pcd_params *p_fm_pcd_params);
+void fm_pcd_close(t_handle h_fm_pcd);
+
+/*
+ * @Function fm_pcd_enable
+ *
+ * @Description This routine should be called after PCD is initialized for
+ * enabling all PCD engines according to their existing
+ * configuration.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init() and when PCD is disabled.
+ */
+uint32_t fm_pcd_enable(t_handle h_fm_pcd);
+
+/*
+ * @Function fm_pcd_disable
+ *
+ * @Description This routine may be called when PCD is enabled in order to
+ * disable all PCD engines. It may be called only when none of
+ * the ports in the system are using the PCD.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init() and when PCD is enabled.
+ */
+uint32_t fm_pcd_disable(t_handle h_fm_pcd);
+
+/*
+ * @Function fm_pcd_get_counter
+ *
+ * @Description Reads one of the FM PCD counters.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] counter The requested counter.
+ *
+ * @Return Counter's current value.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * Note that it is user's responsibility to call this routine
+ * only for enabled counters, and there will be no indication if
+ * a disabled counter is accessed.
+ */
+uint32_t fm_pcd_get_counter(t_handle h_fm_pcd, ioc_fm_pcd_counters counter);
+
+/*
+ * @Function fm_pcd_prs_load_sw
+ *
+ * @Description This routine may be called in order to load software parsing
+ * code.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] p_sw_prs A pointer to a structure of software
+ * parser parameters, including the software
+ * parser image.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init() and when PCD is disabled.
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_prs_load_sw(t_handle h_fm_pcd,
+ ioc_fm_pcd_prs_sw_params_t *p_sw_prs);
+
+/*
+ * @Function fm_pcd_set_advanced_offload_support
+ *
+ * @Description This routine must be called in order to support the following
+ * features: IP-fragmentation, IP-reassembly, IPsec,
+ * Header-manipulation, frame-replicator.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init() and when PCD is disabled.
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_set_advanced_offload_support(t_handle h_fm_pcd);
+
+/*
+ * @Function fm_pcd_kg_set_dflt_value
+ *
+ * @Description Calling this routine sets a global default value to be used
+ * by the KeyGen when parser does not recognize a required
+ * field/header.
+ * By default default values are 0.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] value_id 0,1 - one of 2 global default values.
+ * @Param[in] value The requested default value.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init() and when PCD is disabled.
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_kg_set_dflt_value(t_handle h_fm_pcd,
+ uint8_t value_id, uint32_t value);
+
+/*
+ * @Function fm_pcd_kg_set_additional_data_after_parsing
+ *
+ * @Description Calling this routine allows the KeyGen to access data past
+ * the parser finishing point.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] payload_offset the number of bytes beyond the parser
+ * location.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init() and when PCD is disabled.
+ * This routine should NOT be called from guest-partition (i.e.
+ * guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_kg_set_additional_data_after_parsing(t_handle h_fm_pcd,
+ uint8_t payload_offset);
+
+/*
+ * @Function fm_pcd_set_exception
+ *
+ * @Description Calling this routine enables/disables PCD interrupts.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] exception The exception to be selected.
+ * @Param[in] enable TRUE to enable interrupt, FALSE to mask it.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_set_exception(t_handle h_fm_pcd,
+ ioc_fm_pcd_exceptions exception, bool enable);
+
+/*
+ * @Function fm_pcd_modify_counter
+ *
+ * @Description Sets a value to an enabled counter. Use "0" to reset the
+ * counter.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] counter The requested counter.
+ * @Param[in] value The requested value to be written into the
+ * counter.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_modify_counter(t_handle h_fm_pcd,
+ ioc_fm_pcd_counters counter, uint32_t value);
+
+/*
+ * @Function fm_pcd_set_plcr_statistics
+ *
+ * @Description This routine may be used to enable/disable policer statistics
+ * counter. By default the statistics is enabled.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor
+ * @Param[in] enable TRUE to enable, FALSE to disable.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_pcd_set_plcr_statistics(t_handle h_fm_pcd, bool enable);
+
+/*
+ * @Function fm_pcd_set_prs_statistics
+ *
+ * @Description Defines whether to gather parser statistics including all
+ * ports.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] enable TRUE to enable, FALSE to disable.
+ *
+ * @Return None
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+void fm_pcd_set_prs_statistics(t_handle h_fm_pcd, bool enable);
+
+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
+/*
+ * @Function fm_pcd_dump_regs
+ *
+ * @Description Dumps all PCD registers
+ *
+ * @Param[in] h_fm_pcd A handle to an FM PCD Module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * NOTE: this routine may be called only for FM in master mode
+ * (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the
+ * registers are mapped.
+ */
+uint32_t fm_pcd_dump_regs(t_handle h_fm_pcd);
+
+/*
+ * @Function fm_pcd_kg_dump_regs
+ *
+ * @Description Dumps all PCD KG registers
+ *
+ * @Param[in] h_fm_pcd A handle to an FM PCD Module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * NOTE: this routine may be called only for FM in master mode
+ * (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the
+ * registers are mapped.
+ */
+uint32_t fm_pcd_kg_dump_regs(t_handle h_fm_pcd);
+
+/*
+ * @Function fm_pcd_plcr_dump_regs
+ *
+ * @Description Dumps all PCD Policer registers
+ *
+ * @Param[in] h_fm_pcd A handle to an FM PCD Module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * NOTE: this routine may be called only for FM in master mode
+ * (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the
+ * registers are mapped.
+ */
+uint32_t fm_pcd_plcr_dump_regs(t_handle h_fm_pcd);
+
+/*
+ * @Function fm_pcd_plcr_profile_dump_regs
+ *
+ * @Description Dumps all PCD Policer profile registers
+ *
+ * @Param[in] h_profile A handle to a Policer profile.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * NOTE: this routine may be called only for FM in master mode
+ * (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the
+ * registers are mapped.
+ */
+uint32_t fm_pcd_plcr_profile_dump_regs(t_handle h_profile);
+
+/*
+ * @Function fm_pcd_prs_dump_regs
+ *
+ * @Description Dumps all PCD Parser registers
+ *
+ * @Param[in] h_fm_pcd A handle to an FM PCD Module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * NOTE: this routine may be called only for FM in master mode
+ * (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the
+ * registers are mapped.
+ */
+uint32_t fm_pcd_prs_dump_regs(t_handle h_fm_pcd);
+
+/*
+ * @Function fm_pcd_hc_dump_regs
+ *
+ * @Description Dumps HC Port registers
+ *
+ * @Param[in] h_fm_pcd A handle to an FM PCD Module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ * NOTE: this routine may be called only for FM in master mode
+ * (i.e. 'guestId'=NCSW_MASTER_ID).
+ */
+uint32_t fm_pcd_hc_dump_regs(t_handle h_fm_pcd);
+#endif /* (defined(DEBUG_ERRORS) && ... */
+
+
+/*
+ * KeyGen FM_PCD_Runtime_build_grp FM PCD Runtime Building Unit
+ *
+ * @Description Frame Manager PCD Runtime Building API
+ *
+ * This group contains routines for setting, deleting and
+ * modifying PCD resources, for defining the total PCD tree.
+ * @{
+ */
+
+/*
+ * @Collection Definitions of coarse classification
+ * parameters as required by KeyGen (when coarse classification
+ * is the next engine after this scheme).
+ */
+#define FM_PCD_MAX_NUM_OF_CC_TREES 8
+#define FM_PCD_MAX_NUM_OF_CC_GROUPS 16
+#define FM_PCD_MAX_NUM_OF_CC_UNITS 4
+#define FM_PCD_MAX_NUM_OF_KEYS 256
+#define FM_PCD_MAX_NUM_OF_FLOWS (4 * KILOBYTE)
+#define FM_PCD_MAX_SIZE_OF_KEY 56
+#define FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP 16
+#define FM_PCD_LAST_KEY_INDEX 0xffff
+
+#define FM_PCD_MAX_NUM_OF_CC_NODES 255
+ /* Obsolete, not used - will be removed in the future */
+/* @} */
+
+/*
+ * @Collection A set of definitions to allow protocol
+ * special option description.
+ */
+typedef uint32_t protocol_opt_t;
+ /**< A general type to define a protocol option. */
+
+typedef protocol_opt_t eth_protocol_opt_t;
+ /**< Ethernet protocol options. */
+#define ETH_BROADCAST 0x80000000 /**< Ethernet Broadcast. */
+#define ETH_MULTICAST 0x40000000 /**< Ethernet Multicast. */
+
+typedef protocol_opt_t vlan_protocol_opt_t; /**< VLAN protocol options. */
+#define VLAN_STACKED 0x20000000 /**< Stacked VLAN. */
+
+typedef protocol_opt_t mpls_protocol_opt_t; /**< MPLS protocol options. */
+#define MPLS_STACKED 0x10000000 /**< Stacked MPLS. */
+
+typedef protocol_opt_t ipv_4protocol_opt_t; /**< IPv4 protocol options. */
+#define IPV4_BROADCAST_1 0x08000000 /**< IPv4 Broadcast. */
+#define IPV4_MULTICAST_1 0x04000000 /**< IPv4 Multicast. */
+#define IPV4_UNICAST_2 0x02000000 /**< Tunneled IPv4 - Unicast. */
+#define IPV4_MULTICAST_BROADCAST_2 0x01000000
+ /**< Tunneled IPv4 - Broadcast/Multicast. */
+
+#define IPV4_FRAG_1 0x00000008
+ /**< IPV4 reassembly option. IPV4 Reassembly
+ * manipulation requires network environment
+ * with IPV4 header and IPV4_FRAG_1 option
+ */
+
+typedef protocol_opt_t ipv_6protocol_opt_t; /**< IPv6 protocol options. */
+#define IPV6_MULTICAST_1 0x00800000 /**< IPv6 Multicast. */
+#define IPV6_UNICAST_2 0x00400000 /**< Tunneled IPv6 - Unicast. */
+#define IPV6_MULTICAST_2 0x00200000 /**< Tunneled IPv6 - Multicast. */
+
+#define IPV6_FRAG_1 0x00000004
+ /**< IPV6 reassembly option. IPV6 Reassembly
+ * manipulation requires network environment
+ * with IPV6 header and IPV6_FRAG_1 option; in
+ * case where fragment found, the
+ * fragment-extension offset may be found at
+ * 'shim2' (in parser-result).
+ */
+#if (DPAA_VERSION >= 11)
+typedef protocol_opt_t capwap_protocol_opt_t; /**< CAPWAP protocol options. */
+#define CAPWAP_FRAG_1 0x00000008
+ /**< CAPWAP reassembly option. CAPWAP Reassembly
+ * manipulation requires network environment
+ * with CAPWAP header and CAPWAP_FRAG_1 option;
+ * in case where fragment found, the
+ * fragment-extension offset may be found at
+ * 'shim2' (in parser-result).
+ */
+#endif /* (DPAA_VERSION >= 11) */
+
+/* @} */
+
+#define FM_PCD_MANIP_MAX_HDR_SIZE 256
+#define FM_PCD_MANIP_DSCP_TO_VLAN_TRANS 64
+
+/*
+ * @Collection A set of definitions to support Header Manipulation selection.
+ */
+typedef uint32_t hdr_manip_flags_t;
+ /**< A general type to define a HMan update command flags. */
+
+typedef hdr_manip_flags_t ipv_4hdr_manip_update_flags_t;
+ /**< IPv4 protocol HMan update command flags. */
+
+#define HDR_MANIP_IPV4_TOS 0x80000000
+ /**< update TOS with the given value ('tos' field
+ * of t_FmPcdManipHdrFieldUpdateIpv4)
+ */
+#define HDR_MANIP_IPV4_ID 0x40000000
+ /**< update IP ID with the given value ('id' field
+ * of t_FmPcdManipHdrFieldUpdateIpv4)
+ */
+#define HDR_MANIP_IPV4_TTL 0x20000000
+ /**< Decrement TTL by 1 */
+#define HDR_MANIP_IPV4_SRC 0x10000000
+ /**< update IP source address with the given value
+ * ('src' field of t_FmPcdManipHdrFieldUpdateIpv4)
+ */
+#define HDR_MANIP_IPV4_DST 0x08000000
+ /**< update IP destination address with the given value
+ * ('dst' field of t_FmPcdManipHdrFieldUpdateIpv4)
+ */
+
+typedef hdr_manip_flags_t ipv_6hdr_manip_update_flags_t;
+ /**< IPv6 protocol HMan update command flags. */
+
+#define HDR_MANIP_IPV6_TC 0x80000000
+ /**< update Traffic Class address with the given value
+ * ('trafficClass' field of
+ * t_FmPcdManipHdrFieldUpdateIpv6)
+ */
+#define HDR_MANIP_IPV6_HL 0x40000000
+ /**< Decrement Hop Limit by 1 */
+#define HDR_MANIP_IPV6_SRC 0x20000000
+ /**< update IP source address with the given value
+ * ('src' field of t_FmPcdManipHdrFieldUpdateIpv6)
+ */
+#define HDR_MANIP_IPV6_DST 0x10000000
+ /**< update IP destination address with the given value
+ * ('dst' field of t_FmPcdManipHdrFieldUpdateIpv6)
+ */
+
+typedef hdr_manip_flags_t tcp_udp_hdr_manip_update_flags_t;
+ /**< TCP/UDP protocol HMan update command flags. */
+
+#define HDR_MANIP_TCP_UDP_SRC 0x80000000
+ /**< update TCP/UDP source address with the given value
+ * ('src' field of t_FmPcdManipHdrFieldUpdateTcpUdp)
+ */
+#define HDR_MANIP_TCP_UDP_DST 0x40000000
+ /**< update TCP/UDP destination address with the given value
+ * ('dst' field of t_FmPcdManipHdrFieldUpdateTcpUdp)
+ */
+#define HDR_MANIP_TCP_UDP_CHECKSUM 0x20000000
+ /**< update TCP/UDP checksum */
+
+/* @} */
+
+/*
+ * @Description A type used for returning the order of the key extraction.
+ * each value in this array represents the index of the
+ * extraction command as defined by the user in the
+ * initialization extraction array. The valid size of this array
+ * is the user define number of extractions required (also marked
+ * by the second '0' in this array).
+ */
+typedef uint8_t t_fm_pcd_kg_key_order[FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY];
+
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+/*
+ * @Description Enumeration type for selecting type of statistics mode
+ */
+typedef enum ioc_fm_pcd_stats_type_t {
+ e_FM_PCD_STATS_PER_FLOWID = 0
+ /**< Flow ID is used as index for getting statistics */
+} ioc_fm_pcd_stats_type_t;
+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
+
+/*
+ * @Collection Definitions for CC statistics
+ */
+#if (DPAA_VERSION >= 11)
+#define FM_PCD_CC_STATS_MAX_NUM_OF_FLR 10
+ /* Maximal supported number of frame length ranges */
+#define FM_PCD_CC_STATS_FLR_SIZE 2
+ /* Size in bytes of a frame length range limit */
+#endif /* (DPAA_VERSION >= 11) */
+#define FM_PCD_CC_STATS_COUNTER_SIZE 4
+ /* Size in bytes of a frame length range counter */
+/* @} */
+
+/*
+ * @Description Parameters for defining CC keys parameters
+ * The driver supports two methods for CC node allocation:
+ * dynamic and static. Static mode was created in order to
+ * prevent runtime alloc/free of FMan memory (MURAM), which may
+ * cause fragmentation; in this mode, the driver automatically
+ * allocates the memory according to 'max_num_of_keys' parameter.
+ * The driver calculates the maximal memory size that may be used
+ * for this CC-Node taking into consideration 'mask_support' and
+ * 'statistics_mode' parameters. When 'action' =
+ * e_FM_PCD_ACTION_INDEXED_LOOKUP in the extraction parameters of
+ * this node, 'max_num_of_keys' must be equal to 'num_of_keys'.
+ * In dynamic mode, 'max_num_of_keys' must be zero. At
+ * initialization, all required structures are allocated
+ * according to 'num_of_keys' parameter. During runtime
+ * modification, these structures are re-allocated according to
+ * the updated number of keys.
+ *
+ * Please note that 'action' and 'icIndxMask' mentioned in the
+ * specific parameter explanations are passed in the extraction
+ * parameters of the node (fields of
+ * extractCcParams.extractNonHdr).
+ */
+typedef struct t_keys_params {
+ uint16_t max_num_of_keys;
+ /**< Maximum number of keys that will (ever) be used in this
+ * CC-Node; A value of zero may be used for dynamic memory
+ * allocation.
+ */
+ bool mask_support;
+ /**< This parameter is relevant only if a node is initialized
+ * with 'action' = e_FM_PCD_ACTION_EXACT_MATCH and
+ * max_num_of_keys > 0; Should be TRUE to reserve table memory
+ * for key masks, even if initial keys do not contain masks, or
+ * if the node was initialized as 'empty' (without keys); this
+ * will allow user to add keys with masks at runtime.
+ * NOTE that if user want to use only global-masks (i.e. one
+ * common mask for all the entries within this table, this
+ * parameter should set to 'FALSE'.
+ */
+ ioc_fm_pcd_cc_stats_mode statistics_mode;
+ /**< Determines the supported statistics mode for all node's
+ * keys. To enable statistics gathering, statistics should be
+ * enabled per every key, using 'statisticsEn' in next engine
+ * parameters structure of that key; If 'max_num_of_keys' is
+ * set, all required structures will be preallocated for all
+ * keys.
+ */
+#if (DPAA_VERSION >= 11)
+ uint16_t frame_length_ranges[FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
+ /**< Relevant only for 'RMON' statistics mode (this feature is
+ * supported only on B4860 device); Holds a list of programmable
+ * thresholds - for each received frame, its length in bytes is
+ * examined against these range thresholds and the appropriate
+ * counter is incremented by 1 - for example, to belong to range
+ * i, the following should hold: range i-1 threshold < frame
+ * length <= range i threshold. Each range threshold must be
+ * larger then its preceding range threshold, and last range
+ * threshold must be 0xFFFF.
+ */
+#endif /* (DPAA_VERSION >= 11) */
+ uint16_t num_of_keys;
+ /**< Number of initial keys; Note that in case of 'action' =
+ * e_FM_PCD_ACTION_INDEXED_LOOKUP, this field should be
+ * power-of-2 of the number of bits that are set in 'icIndxMask'
+ */
+ uint8_t key_size;
+ /**< Size of key - for extraction of type FULL_FIELD, 'key_size'
+ * has to be the standard size of the selected key; For other
+ * extraction types, 'key_size' has to be as size of extraction;
+ * When 'action' = e_FM_PCD_ACTION_INDEXED_LOOKUP, 'key_size'
+ * must be 2.
+ */
+ ioc_fm_pcd_cc_key_params_t key_params[FM_PCD_MAX_NUM_OF_KEYS];
+ /**< An array with 'num_of_keys' entries, each entry specifies
+ * the corresponding key parameters; When 'action' =
+ * e_FM_PCD_ACTION_EXACT_MATCH, this value must not exceed 255
+ * (FM_PCD_MAX_NUM_OF_KEYS-1) as the last entry is saved for the
+ * 'miss' entry.
+ */
+ ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params_for_miss;
+ /**< Parameters for defining the next engine when a key is not
+ * matched; Not relevant if action =
+ * e_FM_PCD_ACTION_INDEXED_LOOKUP.
+ */
+} t_keys_params;
+
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+/*
+ * @Description Parameters for defining an insertion manipulation
+ * of type e_FM_PCD_MANIP_INSRT_TO_START_OF_FRAME_TEMPLATE
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_by_template_params_t {
+ uint8_t size;
+ /**< Size of insert template to the start of the frame.
+ */
+ uint8_t hdr_template[FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE];
+ /**< Array of the insertion template. */
+
+ bool modify_outer_ip;
+ /**< TRUE if user want to modify some fields in outer
+ * IP.
+ */
+ struct {
+ uint16_t ip_outer_offset;
+ /**< Offset of outer IP in the insert template, relevant
+ * if modify_outer_ip = TRUE.
+ */
+ uint16_t dscp_ecn;
+ /**< value of dscp_ecn in IP outer, relevant if
+ * modify_outer_ip = TRUE. in IPV4 dscp_ecn only byte -
+ * it has to be adjusted to the right
+ */
+ bool udp_present;
+ /**< TRUE if UDP is present in the insert template,
+ * relevant if modify_outer_ip = TRUE.
+ */
+ uint8_t udp_offset;
+ /**< Offset in the insert template of UDP, relevant if
+ * modify_outer_ip = TRUE and udp_present=TRUE.
+ */
+ uint8_t ip_ident_gen_id;
+ /**< Used by FMan-CTRL to calculate IP-identification
+ * field, relevant if modify_outer_ip = TRUE.
+ */
+ bool recalculate_length;
+ /**< TRUE if recalculate length has to be performed due
+ * to the engines in the path which can change the frame
+ * later, relevant if modify_outer_ip = TRUE.
+ */
+ struct {
+ uint8_t block_size;
+ /**< The CAAM block-size; Used by FMan-CTRL to calculate
+ * the IP Total Length field.
+ */
+ uint8_t extra_bytes_added_aligned_to_block_size;
+ /**< Used by FMan-CTRL to calculate the IP Total Length
+ * field and UDP length
+ */
+ uint8_t extra_bytes_added_not_aligned_to_block_size;
+ /**< Used by FMan-CTRL to calculate the IP Total Length
+ * field and UDP length.
+ */
+ } recalculate_length_params;
+ /**< Recalculate length parameters - relevant if
+ * modify_outer_ip = TRUE and recalculate_length = TRUE
+ */
+ } modify_outer_ip_params;
+ /**< Outer IP modification parameters - ignored if
+ * modify_outer_ip is FALSE
+ */
+
+ bool modify_outer_vlan;
+ /**< TRUE if user wants to modify VPri field in the
+ * outer VLAN header
+ */
+ struct {
+ uint8_t vpri;
+ /**< Value of VPri, relevant if modify_outer_vlan = TRUE
+ * VPri only 3 bits, it has to be adjusted to the right
+ */
+ } modify_outer_vlan_params;
+} ioc_fm_pcd_manip_hdr_insrt_by_template_params_t;
+
+/*
+ * @Description Parameters for defining CAPWAP fragmentation
+ */
+typedef struct ioc_capwap_fragmentation_params {
+ uint16_t size_for_fragmentation;
+ /**< if length of the frame is greater than this value, CAPWAP
+ * fragmentation will be executed.
+ */
+ bool header_options_compr;
+ /**< TRUE - first fragment include the CAPWAP header options
+ * field, and all other fragments exclude the CAPWAP options
+ * field, FALSE - all fragments include CAPWAP header options
+ * field.
+ */
+} ioc_capwap_fragmentation_params;
+
+/*
+ * @Description Parameters for defining CAPWAP reassembly
+ */
+typedef struct ioc_capwap_reassembly_params {
+ uint16_t max_num_frames_in_process;
+ /**< Number of frames which can be reassembled concurrently;
+ * must be power of 2. In case num_of_frames_per_hash_entry ==
+ * e_FM_PCD_MANIP_FOUR_WAYS_HASH, max_num_frames_in_process has
+ * to be in the range of 4 - 512, In case
+ * num_of_frames_per_hash_entry ==
+ * e_FM_PCD_MANIP_EIGHT_WAYS_HASH, max_num_frames_in_process has
+ * to be in the range of 8 - 2048
+ */
+ bool halt_on_duplication_frag;
+ /**< If TRUE, reassembly process will be halted due to
+ * duplicated fragment, and all processed fragments will be
+ * enqueued with error indication; If FALSE, only duplicated
+ * fragments will be enqueued with error indication.
+ */
+ e_fm_pcd_manip_reassem_time_out_mode time_out_mode;
+ /**< Expiration delay initialized by the reassembly process */
+ uint32_t fqid_for_time_out_frames;
+ /**< FQID in which time out frames will enqueue during Time Out
+ * Process
+ */
+ uint32_t timeout_routine_request_time;
+ /**< Represents the time interval in microseconds between
+ * consecutive timeout routine requests It has to be power of 2.
+ */
+ uint32_t timeout_threshold_for_reassm_process;
+ /**< Time interval (microseconds) for marking frames in process
+ * as too old; Frames in process are those for which at least
+ * one fragment was received but not all fragments.
+ */
+ e_fm_pcd_manip_reassem_ways_number num_of_frames_per_hash_entry;
+ /**< Number of frames per hash entry (needed for the reassembly
+ * process)
+ */
+} ioc_capwap_reassembly_params;
+
+/*
+ * @Description Parameters for defining fragmentation/reassembly manipulation
+ */
+typedef struct ioc_fm_pcd_manip_frag_or_reasm_params_t {
+ bool frag;
+ /**< TRUE if using the structure for fragmentation, otherwise
+ * this structure is used for reassembly
+ */
+ uint8_t sg_bpid;
+ /**< Scatter/Gather buffer pool id; Same LIODN number is used
+ * for these buffers as for the received frames buffers, so
+ * buffers of this pool need to be allocated in the same memory
+ * area as the received buffers. If the received buffers arrive
+ * from different sources, the Scatter/Gather BP id should be
+ * mutual to all these sources.
+ */
+ ioc_net_header_type hdr; /**< Header selection */
+ union {
+ ioc_capwap_fragmentation_params capwap_frag_params;
+ /**< Structure for CAPWAP fragmentation, relevant if 'frag' =
+ * TRUE, 'hdr' = HEADER_TYPE_CAPWAP
+ */
+ ioc_capwap_reassembly_params capwap_reasm_params;
+ /**< Structure for CAPWAP reassembly, relevant if 'frag' =
+ * FALSE, 'hdr' = HEADER_TYPE_CAPWAP
+ */
+ } u;
+} ioc_fm_pcd_manip_frag_or_reasm_params_t;
+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
+
+/*
+ * @Description Parameters for defining custom header manipulation for generic
+ * field replacement
+ */
+typedef struct ioc_fm_pcd_manip_hdr_custom_gen_field_replace {
+ uint8_t src_offset;
+ /**< Location of new data - Offset from Parse Result
+ * (>= 16, src_offset+size <= 32, )
+ */
+ uint8_t dst_offset;
+ /**< Location of data to be overwritten - Offset from
+ * start of frame (dst_offset + size <= 256).
+ */
+ uint8_t size;
+ /**< The number of bytes (<=16) to be replaced */
+ uint8_t mask;
+ /**< Optional 1 byte mask. Set to select bits for
+ * replacement (1 - bit will be replaced); Clear to use
+ * field as is.
+ */
+ uint8_t mask_offset;
+ /**< Relevant if mask != 0; Mask offset within the
+ * replaces "size"
+ */
+} ioc_fm_pcd_manip_hdr_custom_gen_field_replace;
+
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+/*
+ * @Description structure for defining statistics node
+ */
+typedef struct ioc_fm_pcd_stats_params_t {
+ ioc_fm_pcd_stats_type_t type; /**< type of statistics node */
+} ioc_fm_pcd_stats_params_t;
+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
+
+/*
+ * @Function fm_pcd_net_env_characteristics_set
+ *
+ * @Description Define a set of Network Environment Characteristics.
+ *
+ * When setting an environment it is important to understand its
+ * application. It is not meant to describe the flows that will
+ * run on the ports using this environment, but what the user
+ * means TO DO with the PCD mechanisms in order to
+ * parse-classify-distribute those frames.
+ * By specifying a distinction unit, the user means it would use
+ * that option for distinction between frames at either a KeyGen
+ * scheme or a coarse classification action descriptor. Using
+ * interchangeable headers to define a unit means that the user
+ * is indifferent to which of the interchangeable headers is
+ * present in the frame, and wants the distinction to be based on
+ * the presence of either one of them.
+ *
+ * Depending on context, there are limitations to the use of
+ * environments. A port using the PCD functionality is bound to
+ * an environment. Some or even all ports may share an
+ * environment but also an environment per port is possible. When
+ * initializing a scheme, a classification plan group (see
+ * below), or a coarse classification tree, one of the
+ * initialized environments must be stated and related to. When a
+ * port is bound to a scheme, a classification plan group, or a
+ * coarse classification tree, it MUST be bound to the same
+ * environment.
+ *
+ * The different PCD modules, may relate (for flows definition)
+ * ONLY on distinction units as defined by their environment.
+ * When initializing a scheme for example, it may not choose to
+ * select IPV4 as a match for recognizing flows unless it was
+ * defined in the relating environment. In fact, to guide the
+ * user through the configuration of the PCD, each module's
+ * characterization in terms of flows is not done using protocol
+ * names, but using environment indexes.
+ *
+ * In terms of HW implementation, the list of distinction units
+ * sets the LCV vectors and later used for match vector,
+ * classification plan vectors and coarse classification
+ * indexing.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] p_NetEnvParams A structure of parameters for the
+ * initialization of the network
+ * environment.
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_net_env_characteristics_set(t_handle,
+ ioc_fm_pcd_net_env_params_t *);
+
+/*
+ * @Function fm_pcd_net_env_characteristics_delete
+ *
+ * @Description Deletes a set of Network Environment Characteristics.
+ *
+ * @Param[in] h_net_env A handle to the Network environment.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+uint32_t fm_pcd_net_env_characteristics_delete(t_handle h_net_env);
+
+/*
+ * @Function fm_pcd_kg_scheme_set
+ *
+ * @Description Initializing or modifying and enabling a scheme for the
+ * KeyGen. This routine should be called for adding or modifying
+ * a scheme. When a scheme needs modifying, the API requires that
+ * it will be rewritten. In such a case 'modify' should be TRUE.
+ * If the routine is called for a valid scheme and 'modify' is
+ * FALSE, it will return error.
+ *
+ * @Param[in] h_fm_pcd If this is a new scheme - A handle to an
+ * FM PCD Module. Otherwise NULL (ignored
+ * by driver).
+ * @Param[in,out] p_scheme_params A structure of parameters for defining
+ * the scheme
+ *
+ * @Return A handle to the initialized scheme on success; NULL code
+ * otherwise. When used as "modify" (rather than for setting a
+ * new scheme), p_scheme_params->id.h_scheme will return NULL if
+ * action fails due to scheme BUSY state.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_kg_scheme_set(t_handle h_fm_pcd,
+ ioc_fm_pcd_kg_scheme_params_t *p_scheme_params);
+
+/*
+ * @Function fm_pcd_kg_scheme_delete
+ *
+ * @Description Deleting an initialized scheme.
+ *
+ * @Param[in] h_scheme scheme handle as returned by
+ * fm_pcd_kg_scheme_set()
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init() & fm_pcd_kg_scheme_set().
+ */
+uint32_t fm_pcd_kg_scheme_delete(t_handle h_scheme);
+
+/*
+ * @Function fm_pcd_kg_scheme_get_counter
+ *
+ * @Description Reads scheme packet counter.
+ *
+ * @Param[in] h_scheme scheme handle as returned by
+ * fm_pcd_kg_scheme_set().
+ *
+ * @Return Counter's current value.
+ *
+ * @Cautions Allowed only following fm_pcd_init() & fm_pcd_kg_scheme_set().
+ */
+uint32_t fm_pcd_kg_scheme_get_counter(t_handle h_scheme);
+
+/*
+ * @Function fm_pcd_kg_scheme_set_counter
+ *
+ * @Description Writes scheme packet counter.
+ *
+ * @Param[in] h_scheme scheme handle as returned by
+ * fm_pcd_kg_scheme_set().
+ * @Param[in] value New scheme counter value - typically '0' for
+ * resetting the counter.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init() & fm_pcd_kg_scheme_set().
+ */
+uint32_t fm_pcd_kg_scheme_set_counter(t_handle h_scheme,
+ uint32_t value);
+
+/*
+ * @Function fm_pcd_plcr_profile_set
+ *
+ * @Description Sets a profile entry in the policer profile table.
+ * The routine overrides any existing value.
+ *
+ * @Param[in] h_fm_pcd A handle to an FM PCD Module.
+ * @Param[in] p_profile A structure of parameters for defining a
+ * policer profile entry.
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise. When used as "modify" (rather than for setting a
+ * new profile), p_profile->id.h_profile will return NULL if
+ * action fails due to profile BUSY state.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_plcr_profile_set(t_handle h_fm_pcd,
+ ioc_fm_pcd_plcr_profile_params_t *p_profile);
+
+/*
+ * @Function fm_pcd_plcr_profile_delete
+ *
+ * @Description Delete a profile entry in the policer profile table.
+ * The routine set entry to invalid.
+ *
+ * @Param[in] h_profile A handle to the profile.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_plcr_profile_delete(t_handle h_profile);
+
+/*
+ * @Function fm_pcd_plcr_profile_get_counter
+ *
+ * @Description Sets an entry in the classification plan.
+ * The routine overrides any existing value.
+ *
+ * @Param[in] h_profile A handle to the profile.
+ * @Param[in] counter Counter selector.
+ *
+ * @Return specific counter value.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_plcr_profile_get_counter(t_handle h_profile,
+ ioc_fm_pcd_plcr_profile_counters counter);
+
+/*
+ * @Function fm_pcd_plcr_profile_set_counter
+ *
+ * @Description Sets an entry in the classification plan.
+ * The routine overrides any existing value.
+ *
+ * @Param[in] h_profile A handle to the profile.
+ * @Param[in] counter Counter selector.
+ * @Param[in] value value to set counter with.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_plcr_profile_set_counter(t_handle h_profile,
+ ioc_fm_pcd_plcr_profile_counters counter,
+ uint32_t value);
+
+/*
+ * @Function fm_pcd_cc_root_build
+ *
+ * @Description This routine must be called to define a complete coarse
+ * classification tree. This is the way to define coarse
+ * classification to a certain flow - the KeyGen schemes may
+ * point only to trees defined in this way.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] p_params A structure of parameters to define the tree.
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_cc_root_build(t_handle h_fm_pcd,
+ ioc_fm_pcd_cc_tree_params_t *p_params);
+
+/*
+ * @Function fm_pcd_cc_root_delete
+ *
+ * @Description Deleting an built tree.
+ *
+ * @Param[in] h_cc_tree A handle to a CC tree.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_cc_root_delete(t_handle h_cc_tree);
+
+/*
+ * @Function fm_pcd_cc_root_modify_next_engine
+ *
+ * @Description Modify the Next Engine Parameters in the entry of the tree.
+ *
+ * @Param[in] h_cc_tree A handle to the tree
+ * @Param[in] grp_id A Group index in the tree
+ * @Param[in] index Entry index in the group
+ * defined by grp_id
+ * @Param[in] p_fm_pcd_cc_next_engine Pointer to new next
+ * engine parameters
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_PCD_CcBuildTree().
+ */
+uint32_t fm_pcd_cc_root_modify_next_engine(t_handle h_cc_tree,
+ uint8_t grp_id,
+ uint8_t index,
+ ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function fm_pcd_match_table_set
+ *
+ * @Description This routine should be called for each CC (coarse
+ * classification) node. The whole CC tree should be built bottom
+ * up so that each node points to already defined nodes.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] p_param A structure of parameters defining the CC node
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_match_table_set(t_handle h_fm_pcd,
+ ioc_fm_pcd_cc_node_params_t *p_param);
+
+/*
+ * @Function fm_pcd_match_table_delete
+ *
+ * @Description Deleting an built node.
+ *
+ * @Param[in] h_cc_node A handle to a CC node.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_match_table_delete(t_handle h_cc_node);
+
+/*
+ * @Function fm_pcd_match_table_modify_miss_next_engine
+ *
+ * @Description Modify the Next Engine Parameters of the Miss key case of the
+ * node.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] p_fm_pcd_cc_next_engine_params Parameters for defining
+ * next engine
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set(); Not
+ * relevant in the case the node is of type 'INDEXED_LOOKUP'.
+ * When configuring nextEngine = e_FM_PCD_CC, note that
+ * p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ * different from the currently changed table.
+ *
+ */
+uint32_t fm_pcd_match_table_modify_miss_next_engine(t_handle h_cc_node,
+ ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine_params);
+
+/*
+ * @Function fm_pcd_match_table_remove_key
+ *
+ * @Description Remove the key (including next engine parameters of this key)
+ * defined by the index of the relevant node.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_index Key index for removing
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set() was called for
+ * this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_remove_key(t_handle h_cc_node,
+ uint16_t key_index);
+
+/*
+ * @Function fm_pcd_match_table_add_key
+ *
+ * @Description Add the key (including next engine parameters of this key in
+ * the index defined by the key_index. Note that
+ * 'FM_PCD_LAST_KEY_INDEX' may be used by user that don't care
+ * about the position of the key in the table - in that case, the
+ * key will be automatically added by the driver in the last
+ * available entry.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_index Key index for adding.
+ * @Param[in] key_size Key size of added key
+ * @Param[in] p_key_params A pointer to the parameters includes new key
+ * with Next Engine Parameters
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set() was called for
+ * this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_add_key(t_handle h_cc_node,
+ uint16_t key_index,
+ uint8_t key_size,
+ ioc_fm_pcd_cc_key_params_t *p_key_params);
+
+/*
+ * @Function fm_pcd_match_table_modify_next_engine
+ *
+ * @Description Modify the Next Engine Parameters in the relevant key entry of
+ * the node.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_index Key index for Next
+ * Engine modifications
+ * @Param[in] p_fm_pcd_cc_next_engine Parameters for defining
+ * next engine
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set(). When
+ * configuring nextEngine = e_FM_PCD_CC, note that
+ * p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ * different from the currently changed table.
+ *
+ */
+uint32_t fm_pcd_match_table_modify_next_engine(t_handle h_cc_node,
+ uint16_t key_index,
+ ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function fm_pcd_match_table_modify_key_and_next_engine
+ *
+ * @Description Modify the key and Next Engine Parameters of this key in the
+ * index defined by the key_index.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_index Key index for adding
+ * @Param[in] key_size Key size of added key
+ * @Param[in] p_key_params A pointer to the parameters includes
+ * modified key and modified Next Engine
+ * Params
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set() was called for
+ * this node and the nodes that lead to it. When configuring
+ * nextEngine = e_FM_PCD_CC, note that
+ * p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ * different from the currently changed table.
+ */
+uint32_t fm_pcd_match_table_modify_key_and_next_engine(t_handle h_cc_node,
+ uint16_t key_index,
+ uint8_t key_size,
+ ioc_fm_pcd_cc_key_params_t *p_key_params);
+
+/*
+ * @Function fm_pcd_match_table_modify_key
+ *
+ * @Description Modify the key in the index defined by the key_index.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_index Key index for adding
+ * @Param[in] key_size Key size of added key
+ * @Param[in] p_key A pointer to the new key
+ * @Param[in] p_mask A pointer to the new mask if relevant,
+ * otherwise pointer to NULL
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set() was called for
+ * this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_modify_key(t_handle h_cc_node,
+ uint16_t key_index,
+ uint8_t key_size,
+ uint8_t *p_key,
+ uint8_t *p_mask);
+
+/*
+ * @Function fm_pcd_match_table_find_nremove_key
+ *
+ * @Description Remove the key (including next engine parameters of this key)
+ * defined by the key and mask. Note that this routine will
+ * search the node to locate the index of the required key
+ * (& mask) to remove.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_size Key size of the one to remove.
+ * @Param[in] p_key A pointer to the requested key to remove.
+ * @Param[in] p_mask A pointer to the mask if relevant,
+ * otherwise pointer to NULL
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set() was called for
+ * this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_find_nremove_key(t_handle h_cc_node,
+ uint8_t key_size,
+ uint8_t *p_key,
+ uint8_t *p_mask);
+
+/*
+ * @Function fm_pcd_match_table_find_nmodify_next_engine
+ *
+ * @Description Modify the Next Engine Parameters in the relevant key entry of
+ * the node. Note that this routine will search the node to
+ * locate the index of the required key (& mask) to modify.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_size Key size of the one to modify.
+ * @Param[in] p_key A pointer to the requested key to modify
+ * @Param[in] p_mask A pointer to the mask if relevant,
+ * otherwise pointer to NULL
+ * @Param[in] p_fm_pcd_cc_next_engine Parameters for defining
+ * next engine
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set(). When
+ * configuring nextEngine = e_FM_PCD_CC, note that
+ * p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ * different from the currently changed table.
+ */
+uint32_t fm_pcd_match_table_find_nmodify_next_engine(t_handle h_cc_node,
+ uint8_t key_size,
+ uint8_t *p_key,
+ uint8_t *p_mask,
+ ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function fm_pcd_match_table_find_nmodify_key_and_next_engine
+ *
+ * @Description Modify the key and Next Engine Parameters of this key in the
+ * index defined by the key_index. Note that this routine will
+ * search the node to locate the index of the required key
+ * (& mask) to modify.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_size Key size of the one to modify.
+ * @Param[in] p_key A pointer to the requested key to modify
+ * @Param[in] p_mask A pointer to the mask if relevant,
+ * otherwise pointer to NULL
+ * @Param[in] p_key_params A pointer to the parameters includes
+ * modified key and modified Next Engine
+ * Params
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set() was called for
+ * this node and the nodes that lead to it.
+ * When configuring nextEngine = e_FM_PCD_CC, note that
+ * p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ * different from the currently changed table.
+ */
+uint32_t fm_pcd_match_table_find_nmodify_key_and_next_engine(t_handle h_cc_node,
+ uint8_t key_size,
+ uint8_t *p_key,
+ uint8_t *p_mask,
+ ioc_fm_pcd_cc_key_params_t *p_key_params);
+
+/*
+ * @Function fm_pcd_match_table_find_nmodify_key
+ *
+ * @Description Modify the key in the index defined by the key_index. Note
+ * that this routine will search the node to locate the index of
+ * the required key (& mask) to modify.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_size Key size of the one to modify.
+ * @Param[in] p_key A pointer to the requested key to modify.
+ * @Param[in] p_mask A pointer to the mask if relevant,
+ * otherwise pointer to NULL
+ * @Param[in] p_new_key A pointer to the new key
+ * @Param[in] p_new_mask A pointer to the new mask if relevant,
+ * otherwise pointer to NULL
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set() was called for
+ * this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_find_nmodify_key(t_handle h_cc_node,
+ uint8_t key_size,
+ uint8_t *p_key,
+ uint8_t *p_mask,
+ uint8_t *p_new_key,
+ uint8_t *p_new_mask);
+
+/*
+ * @Function fm_pcd_match_table_get_key_counter
+ *
+ * @Description This routine may be used to get a counter of specific key in a
+ * CC Node; This counter reflects how many frames passed that
+ * were matched this key.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_index Key index for adding
+ *
+ * @Return The specific key counter.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set().
+ */
+uint32_t fm_pcd_match_table_get_key_counter(t_handle h_cc_node,
+ uint16_t key_index);
+
+/*
+ * @Function fm_pcd_match_table_get_key_statistics
+ *
+ * @Description This routine may be used to get statistics counters of
+ * specific key in a CC Node.
+ *
+ * If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ * 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ * node, these counters reflect how many frames passed that were
+ * matched this key; The total frames count will be returned in
+ * the counter of the first range (as only one frame length range
+ * was defined). If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for
+ * this node, the total frame count will be separated to frame
+ * length counters, based on provided frame length ranges.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_index Key index for adding
+ * @Param[out] p_key_statistics Key statistics counters
+ *
+ * @Return The specific key statistics.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set().
+ */
+uint32_t fm_pcd_match_table_get_key_statistics(t_handle h_cc_node,
+ uint16_t key_index,
+ ioc_fm_pcd_cc_key_statistics_t *p_key_statistics);
+
+/*
+ * @Function fm_pcd_match_table_get_miss_statistics
+ *
+ * @Description This routine may be used to get statistics counters of miss
+ * entry in a CC Node.
+ *
+ * If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ * 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ * node, these counters reflect how many frames were not matched
+ * to any existing key and therefore passed through the miss
+ * entry; The total frames count will be returned in the counter
+ * of the first range (as only one frame length range was
+ * defined).
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[out] p_miss_statistics Statistics counters for 'miss'
+ *
+ * @Return The statistics for 'miss'.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set().
+ */
+uint32_t fm_pcd_match_table_get_miss_statistics(t_handle h_cc_node,
+ ioc_fm_pcd_cc_key_statistics_t *p_miss_statistics);
+
+/*
+ * @Function fm_pcd_match_table_find_nget_key_statistics
+ *
+ * @Description This routine may be used to get statistics counters of
+ * specific key in a CC Node.
+ *
+ * If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ * 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ * node, these counters reflect how many frames passed that were
+ * matched this key; The total frames count will be returned in
+ * the counter of the first range (as only one frame length range
+ * was defined). If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for
+ * this node, the total frame count will be separated to frame
+ * length counters, based on provided frame length ranges.
+ * Note that this routine will search the node to locate the
+ * index of the required key based on received key parameters.
+ *
+ * @Param[in] h_cc_node A handle to the node
+ * @Param[in] key_size Size of the requested key
+ * @Param[in] p_key A pointer to the requested key
+ * @Param[in] p_mask A pointer to the mask if relevant,
+ * otherwise pointer to NULL
+ * @Param[out] p_key_statistics Key statistics counters
+ *
+ * @Return The specific key statistics.
+ *
+ * @Cautions Allowed only following fm_pcd_match_table_set().
+ */
+uint32_t fm_pcd_match_table_find_nget_key_statistics(t_handle h_cc_node,
+ uint8_t key_size,
+ uint8_t *p_key,
+ uint8_t *p_mask,
+ ioc_fm_pcd_cc_key_statistics_t *p_key_statistics);
+
+/*
+ * @Function fm_pcd_match_table_get_next_engine
+ *
+ * @Description Gets NextEngine of the relevant key_index.
+ *
+ * @Param[in] h_cc_node A handle to the node.
+ * @Param[in] key_index key_index in the
+ * relevant node.
+ * @Param[out] p_fm_pcd_cc_next_engine_params here updated
+ * nextEngine parameters
+ * for the relevant
+ * key_index of the CC Node
+ * received as parameter to
+ * this function
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_match_table_get_next_engine(t_handle h_cc_node,
+ uint16_t key_index,
+ ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine_params);
+
+/*
+ * @Function fm_pcd_match_table_get_indexed_hash_bucket
+ *
+ * @Description This routine simulates KeyGen operation on the provided key
+ * and calculates to which hash bucket it will be mapped.
+ *
+ * @Param[in] h_cc_node A handle to the node.
+ * @Param[in] kg_key_size Key size as it was configured in
+ * the KG scheme that leads to this
+ * hash.
+ * @Param[in] p_kg_key Pointer to the key; must be like
+ * the key that the KG is
+ * generated, i.e. the same
+ * extraction and with mask if
+ * exist.
+ * @Param[in] kg_hash_shift Hash-shift as it was configured
+ * in the KG scheme that leads to
+ * this hash.
+ * @Param[out] p_cc_node_bucket_handle Pointer to the bucket of the
+ * provided key.
+ * @Param[out] p_bucket_index Index to the bucket of the
+ * provided key
+ * @Param[out] p_last_index Pointer to last index in the
+ * bucket of the provided key.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set()
+ */
+uint32_t fm_pcd_match_table_get_indexed_hash_bucket(t_handle h_cc_node,
+ uint8_t kg_key_size,
+ uint8_t *p_kg_key,
+ uint8_t kg_hash_shift,
+ t_handle *p_cc_node_bucket_handle,
+ uint8_t *p_bucket_index,
+ uint16_t *p_last_index);
+
+/*
+ * @Function fm_pcd_hash_table_set
+ *
+ * @Description This routine initializes a hash table structure.
+ * KeyGen hash result determines the hash bucket.
+ * Next, KeyGen key is compared against all keys of this bucket
+ * (exact match).
+ * Number of sets (number of buckets) of the hash equals to the
+ * number of 1-s in 'hashResMask' in the provided parameters.
+ * Number of hash table ways is then calculated by dividing
+ * 'max_num_of_keys' equally between the hash sets. This is the
+ * maximal number of keys that a hash bucket may hold.
+ * The hash table is initialized empty and keys may be added to
+ * it following the initialization. Keys masks are not supported
+ * in current hash table implementation.
+ * The initialized hash table can be integrated as a node in a CC
+ * tree.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] p_param A structure of parameters defining the hash
+ * table
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_hash_table_set(t_handle h_fm_pcd,
+ ioc_fm_pcd_hash_table_params_t *p_param);
+
+/*
+ * @Function fm_pcd_hash_table_delete
+ *
+ * @Description This routine deletes the provided hash table and released all
+ * its allocated resources.
+ *
+ * @Param[in] h_hash_tbl A handle to a hash table
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_delete(t_handle h_hash_tbl);
+
+/*
+ * @Function fm_pcd_hash_table_add_key
+ *
+ * @Description This routine adds the provided key (including next engine
+ * parameters of this key) to the hash table.
+ * The key is added as the last key of the bucket that it is
+ * mapped to.
+ *
+ * @Param[in] h_hash_tbl A handle to a hash table
+ * @Param[in] key_size Key size of added key
+ * @Param[in] p_key_params A pointer to the parameters includes
+ * new key with next engine parameters; The pointer
+ * to the key mask must be NULL, as masks are not
+ * supported in hash table implementation.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_add_key(t_handle h_hash_tbl,
+ uint8_t key_size,
+ ioc_fm_pcd_cc_key_params_t *p_key_params);
+
+/*
+ * @Function fm_pcd_hash_table_remove_key
+ *
+ * @Description This routine removes the requested key (including next engine
+ * parameters of this key) from the hash table.
+ *
+ * @Param[in] h_hash_tbl A handle to a hash table
+ * @Param[in] key_size Key size of the one to remove.
+ * @Param[in] p_key A pointer to the requested key to remove.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_remove_key(t_handle h_hash_tbl,
+ uint8_t key_size,
+ uint8_t *p_key);
+
+/*
+ * @Function fm_pcd_hash_table_modify_next_engine
+ *
+ * @Description This routine modifies the next engine for the provided key.
+ * The key should be previously added to the hash table.
+ *
+ * @Param[in] h_hash_tbl A handle to a hash table
+ * @Param[in] key_size Key size of the key to modify.
+ * @Param[in] p_key A pointer to the requested key
+ * to modify.
+ * @Param[in] p_fm_pcd_cc_next_engine A structure for defining
+ * new next engine parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ * When configuring nextEngine = e_FM_PCD_CC, note that
+ * p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ * different from the currently changed table.
+ */
+uint32_t fm_pcd_hash_table_modify_next_engine(t_handle h_hash_tbl,
+ uint8_t key_size,
+ uint8_t *p_key,
+ ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function fm_pcd_hash_table_modify_miss_next_engine
+ *
+ * @Description This routine modifies the next engine on key match miss.
+ *
+ * @Param[in] h_hash_tbl A handle to a hash table
+ * @Param[in] p_fm_pcd_cc_next_engine A structure for defining
+ * new next engine parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ * When configuring nextEngine = e_FM_PCD_CC, note that
+ * p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ * different from the currently changed table.
+ */
+uint32_t fm_pcd_hash_table_modify_miss_next_engine(t_handle h_hash_tbl,
+ ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function fm_pcd_hash_table_get_miss_next_engine
+ *
+ * @Description Gets NextEngine in case of key match miss.
+ *
+ * @Param[in] h_hash_tbl A handle to a hash table
+ * @Param[out] p_fm_pcd_cc_next_engine_params Next engine parameters
+ * for the specified hash
+ * table.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_get_miss_next_engine(t_handle h_hash_tbl,
+ ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine_params);
+
+/*
+ * @Function fm_pcd_hash_table_find_nget_key_statistics
+ *
+ * @Description This routine may be used to get statistics counters of
+ * specific key in a hash table.
+ *
+ * If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ * 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ * node, these counters reflect how many frames passed that were
+ * matched this key; The total frames count will be returned in
+ * the counter of the first range (as only one frame length range
+ * was defined). If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for
+ * this node, the total frame count will be separated to frame
+ * length counters, based on provided frame length ranges. Note
+ * that this routine will identify the bucket of this key in the
+ * hash table and will search the bucket to locate the index of
+ * the required key based on received key parameters.
+ *
+ * @Param[in] h_hash_tbl A handle to a hash table
+ * @Param[in] key_size Size of the requested key
+ * @Param[in] p_key A pointer to the requested key
+ * @Param[out] p_key_statistics Key statistics counters
+ *
+ * @Return The specific key statistics.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_find_nget_key_statistics(t_handle h_hash_tbl,
+ uint8_t key_size,
+ uint8_t *p_key,
+ ioc_fm_pcd_cc_key_statistics_t *p_key_statistics);
+
+/*
+ * @Function fm_pcd_hash_table_get_miss_statistics
+ *
+ * @Description This routine may be used to get statistics counters of 'miss'
+ * entry of the a hash table.
+ *
+ * If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ * 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ * node, these counters reflect how many frames were not matched
+ * to any existing key and therefore passed through the miss
+ * entry;
+ *
+ * @Param[in] h_hash_tbl A handle to a hash table
+ * @Param[out] p_miss_statistics Statistics counters for 'miss'
+ *
+ * @Return The statistics for 'miss'.
+ *
+ * @Cautions Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_get_miss_statistics(t_handle h_hash_tbl,
+ ioc_fm_pcd_cc_key_statistics_t *p_miss_statistics);
+
+/*
+ * @Function fm_pcd_manip_node_set
+ *
+ * @Description This routine should be called for defining a manipulation
+ * node. A manipulation node must be defined before the CC node
+ * that precedes it.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] p_fm_pcd_manip_params A structure of parameters
+ * defining the manipulation
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_manip_node_set(t_handle h_fm_pcd,
+ ioc_fm_pcd_manip_params_t *p_fm_pcd_manip_params);
+
+/*
+ * @Function fm_pcd_manip_node_delete
+ *
+ * @Description Delete an existing manipulation node.
+ *
+ * @Param[in] h_manip_node A handle to a manipulation node.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_manip_node_set().
+ */
+uint32_t fm_pcd_manip_node_delete(t_handle h_manip_node);
+
+/*
+ * @Function fm_pcd_manip_get_statistics
+ *
+ * @Description Retrieve the manipulation statistics.
+ *
+ * @Param[in] h_manip_node A handle to a manipulation node.
+ * @Param[out] p_fm_pcd_manip_stats A structure for retrieving the
+ * manipulation statistics
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_manip_node_set().
+ */
+uint32_t fm_pcd_manip_get_statistics(t_handle h_manip_node,
+ ioc_fm_pcd_manip_stats_t *p_fm_pcd_manip_stats);
+
+/*
+ * @Function fm_pcd_manip_node_replace
+ *
+ * @Description Change existing manipulation node to be according to new
+ * requirement.
+ *
+ * @Param[in] h_manip_node A handle to a manipulation node.
+ * @Param[out] p_manip_params A structure of parameters defining the
+ * change requirement
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_manip_node_set().
+ */
+uint32_t fm_pcd_manip_node_replace(t_handle h_manip_node,
+ioc_fm_pcd_manip_params_t *p_manip_params);
+
+#if (DPAA_VERSION >= 11)
+/*
+ * @Function fm_pcd_frm_replic_set_group
+ *
+ * @Description Initialize a Frame Replicator group.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] p_frm_replic_group_param A structure of parameters for
+ * the initialization of the frame
+ * replicator group.
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_frm_replic_set_group(t_handle h_fm_pcd,
+ ioc_fm_pcd_frm_replic_group_params_t *p_frm_replic_group_param);
+
+/*
+ * @Function fm_pcd_frm_replic_delete_group
+ *
+ * @Description Delete a Frame Replicator group.
+ *
+ * @Param[in] h_frm_replic_group A handle to the frame replicator group.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_frm_replic_set_group().
+ */
+uint32_t fm_pcd_frm_replic_delete_group(t_handle h_frm_replic_group);
+
+/*
+ * @Function fm_pcd_frm_replic_add_member
+ *
+ * @Description Add the member in the index defined by the member_index.
+ *
+ * @Param[in] h_frm_replic_group A handle to the frame replicator group.
+ * @Param[in] member_index member index for adding.
+ * @Param[in] p_member_params A pointer to the new member parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_frm_replic_set_group() of this
+ * group.
+ */
+uint32_t fm_pcd_frm_replic_add_member(t_handle h_frm_replic_group,
+ uint16_t member_index,
+ ioc_fm_pcd_cc_next_engine_params_t *p_member_params);
+
+/*
+ * @Function fm_pcd_frm_replic_remove_member
+ *
+ * @Description Remove the member defined by the index from the relevant
+ * group.
+ *
+ * @Param[in] h_frm_replic_group A handle to the frame replicator group.
+ * @Param[in] member_index member index for removing.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_frm_replic_set_group() of this
+ * group.
+ */
+uint32_t fm_pcd_frm_replic_remove_member(t_handle h_frm_replic_group,
+ uint16_t member_index);
+#endif /* (DPAA_VERSION >= 11) */
+
+#if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT))
+/*
+ * @Function fm_pcd_statistics_set_node
+ *
+ * @Description This routine should be called for defining a statistics node.
+ *
+ * @Param[in] h_fm_pcd FM PCD module descriptor.
+ * @Param[in] p_fm_pcdstats_params A structure of parameters defining the
+ * statistics
+ *
+ * @Return A handle to the initialized object on success; NULL code
+ * otherwise.
+ *
+ * @Cautions Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_statistics_set_node(t_handle h_fm_pcd,
+ ioc_fm_pcd_stats_params_t *p_fm_pcdstats_params);
+#endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */
+
+/** @} */ /* end of FM_PCD_Runtime_build_grp group */
+/** @} */ /* end of FM_PCD_Runtime_grp group */
+/** @} */ /* end of FM_PCD_grp group */
+/** @} */ /* end of FM_grp group */
+
+#endif /* __FM_PCD_EXT_H */
new file mode 100644
@@ -0,0 +1,3804 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __FM_PORT_EXT_H
+#define __FM_PORT_EXT_H
+
+#include <errno.h>
+#include "ncsw_ext.h"
+#include "fm_pcd_ext.h"
+#include "fm_ext.h"
+#include "net_ext.h"
+#include "dpaa_integration.h"
+
+/*
+ * @Description FM Port routines
+ */
+
+/*
+ *
+ * @Group lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
+ *
+ * @Description FM Linux ioctls definitions and enums
+ *
+ * @{
+ */
+
+/*
+ * @Group lnx_ioctl_FM_PORT_grp FM Port
+ *
+ * @Description FM Port API
+ *
+ * The FM uses a general module called "port" to represent a Tx
+ * port (MAC), an Rx port (MAC), offline parsing flow or host
+ * command flow. There may be up to 17 (may change) ports in an
+ * FM - 5 Tx ports (4 for the 1G MACs, 1 for the 10G MAC), 5 Rx
+ * Ports, and 7 Host command/Offline parsing ports. The SW driver
+ * manages these ports as sub-modules of the FM, i.e. after an FM
+ * is initialized, its ports may be initialized and operated
+ * upon.
+ *
+ * The port is initialized aware of its type, but other functions
+ * on a port may be indifferent to its type. When necessary, the
+ * driver verifies coherency and returns error if applicable.
+ *
+ * On initialization, user specifies the port type and it's index
+ * (relative to the port's type). Host command and Offline
+ * parsing ports share the same id range, I.e user may not
+ * initialized host command port 0 and offline parsing port 0.
+ *
+ * @{
+ */
+
+/*
+ * @Description An enum for defining port PCD modes.
+ * (Must match enum e_fm_port_pcd_support defined in
+ * fm_port_ext.h)
+ *
+ * This enum defines the superset of PCD engines support - i.e.
+ * not all engines have to be used, but all have to be enabled.
+ * The real flow of a specific frame depends on the PCD
+ * configuration and the frame headers and payload. Note: the
+ * first engine and the first engine after the parser (if exists)
+ * should be in order, the order is important as it will define
+ * the flow of the port. However, as for the rest engines (the
+ * ones that follows), the order is not important anymore as it
+ * is defined by the PCD graph itself.
+ */
+typedef enum ioc_fm_port_pcd_support {
+ e_IOC_FM_PCD_NONE = 0
+ /**< BMI to BMI, PCD is not used */
+ , e_IOC_FM_PCD_PRS_ONLY /**< Use only Parser */
+ , e_IOC_FM_PCD_PLCR_ONLY /**< Use only Policer */
+ , e_IOC_FM_PCD_PRS_PLCR/**< Use Parser and Policer */
+ , e_IOC_FM_PCD_PRS_KG /**< Use Parser and Keygen */
+ , e_IOC_FM_PCD_PRS_KG_AND_CC
+ /**< Use Parser, Keygen and Coarse Classification */
+ , e_IOC_FM_PCD_PRS_KG_AND_CC_AND_PLCR
+ /**< Use all PCD engines */
+ , e_IOC_FM_PCD_PRS_KG_AND_PLCR
+ /**< Use Parser, Keygen and Policer */
+ , e_IOC_FM_PCD_PRS_CC
+ /**< Use Parser and Coarse Classification */
+ , e_IOC_FM_PCD_PRS_CC_AND_PLCR
+ /**< Use Parser and Coarse Classification and Policer */
+ , e_IOC_FM_PCD_CC_ONLY
+ /**< Use only Coarse Classification */
+#if (defined(FM_CAPWAP_SUPPORT) && (DPAA_VERSION == 10))
+ , e_IOC_FM_PCD_CC_AND_KG
+ /**< Use Coarse Classification,and Keygen */
+ , e_IOC_FM_PCD_CC_AND_KG_AND_PLCR
+ /**< Use Coarse Classification, Keygen and Policer */
+#endif /* FM_CAPWAP_SUPPORT */
+} ioc_fm_port_pcd_support;
+
+/*
+ * @Collection FM Frame error
+ */
+typedef uint32_t ioc_fm_port_frame_err_select_t;
+ /**< typedef for defining Frame Descriptor errors */
+
+/* @} */
+
+/*
+ * @Description An enum for defining Dual Tx rate limiting scale.
+ * (Must match e_fm_port_dual_rate_limiter_scale_down defined in
+ * fm_port_ext.h)
+ */
+typedef enum ioc_fm_port_dual_rate_limiter_scale_down {
+ e_IOC_FM_PORT_DUAL_RATE_LIMITER_NONE = 0,
+ /**< Use only single rate limiter*/
+ e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2,
+ /**< Divide high rate limiter by 2 */
+ e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4,
+ /**< Divide high rate limiter by 4 */
+ e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8
+ /**< Divide high rate limiter by 8 */
+} ioc_fm_port_dual_rate_limiter_scale_down;
+
+/*
+ * @Description A structure for defining Tx rate limiting
+ * (Must match struct t_fm_port_rate_limit defined in
+ * fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_rate_limit_t {
+ uint16_t max_burst_size;
+ /**< in KBytes for Tx ports, in frames for offline
+ * parsing ports. (note that for early chips burst size
+ * is rounded up to a multiply of 1000 frames).
+ */
+ uint32_t rate_limit;
+ /**< in Kb/sec for Tx ports, in frame/sec for offline
+ * parsing ports. Rate limit refers to data rate (rather
+ * than line rate).
+ */
+ ioc_fm_port_dual_rate_limiter_scale_down rate_limit_divider;
+ /**< For offline parsing ports only. Not-valid for some
+ * earlier chip revisions
+ */
+} ioc_fm_port_rate_limit_t;
+
+
+/*
+ * @Group lnx_ioctl_FM_PORT_runtime_control_grp FM Port Runtime Control
+ * Unit
+ *
+ * @Description FM Port Runtime control unit API functions, definitions and
+ * enums.
+ *
+ * @{
+ */
+
+/*
+ * @Description An enum for defining FM Port counters.
+ * (Must match enum e_fm_port_counters defined in fm_port_ext.h)
+ */
+typedef enum ioc_fm_port_counters {
+ e_IOC_FM_PORT_COUNTERS_CYCLE, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_TASK_UTIL, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_QUEUE_UTIL, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_DMA_UTIL, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_FIFO_UTIL, /**< BMI performance counter */
+ e_IOC_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION,
+ /**< BMI Rx only performance counter */
+ e_IOC_FM_PORT_COUNTERS_FRAME, /**< BMI statistics counter */
+ e_IOC_FM_PORT_COUNTERS_DISCARD_FRAME, /**< BMI statistics counter */
+ e_IOC_FM_PORT_COUNTERS_DEALLOC_BUF,
+ /**< BMI deallocate buffer statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_BAD_FRAME,
+ /**< BMI Rx only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_LARGE_FRAME,
+ /**< BMI Rx only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_FILTER_FRAME,
+ /**< BMI Rx & OP only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_LIST_DMA_ERR,
+ /**< BMI Rx, OP & HC only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD,
+ /**< BMI Rx, OP & HC statistics counter */
+ e_IOC_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER,
+ /**< BMI Rx, OP & HC only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_WRED_DISCARD,
+ /**< BMI OP & HC only statistics counter */
+ e_IOC_FM_PORT_COUNTERS_LENGTH_ERR,
+ /**< BMI non-Rx statistics counter */
+ e_IOC_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT,
+ /**< BMI non-Rx statistics counter */
+ e_IOC_FM_PORT_COUNTERS_DEQ_TOTAL,/**< QMI total QM dequeues counter */
+ e_IOC_FM_PORT_COUNTERS_ENQ_TOTAL,/**< QMI total QM enqueues counter */
+ e_IOC_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT,/**< QMI counter */
+ e_IOC_FM_PORT_COUNTERS_DEQ_CONFIRM /**< QMI counter */
+} ioc_fm_port_counters;
+
+typedef struct ioc_fm_port_bmi_stats_t {
+ uint32_t cnt_cycle;
+ uint32_t cnt_task_util;
+ uint32_t cnt_queue_util;
+ uint32_t cnt_dma_util;
+ uint32_t cnt_fifo_util;
+ uint32_t cnt_rx_pause_activation;
+ uint32_t cnt_frame;
+ uint32_t cnt_discard_frame;
+ uint32_t cnt_dealloc_buf;
+ uint32_t cnt_rx_bad_frame;
+ uint32_t cnt_rx_large_frame;
+ uint32_t cnt_rx_filter_frame;
+ uint32_t cnt_rx_list_dma_err;
+ uint32_t cnt_rx_out_of_buffers_discard;
+ uint32_t cnt_wred_discard;
+ uint32_t cnt_length_err;
+ uint32_t cnt_unsupported_format;
+} ioc_fm_port_bmi_stats_t;
+
+/*
+ * @Description Structure for Port id parameters.
+ * (Description may be inaccurate;
+ * must match struct t_fm_port_congestion_grps defined in
+ * fm_port_ext.h)
+ *
+ * Fields commented 'IN' are passed by the port module to be used
+ * by the FM module. Fields commented 'OUT' will be filled by FM
+ * before returning to port.
+ */
+typedef struct ioc_fm_port_congestion_groups_t {
+ uint16_t num_of_congestion_grps_to_consider;
+ /**< The number of required congestion groups to define
+ * the size of the following array
+ */
+ uint8_t congestion_grps_to_consider[FM_NUM_CONG_GRPS];
+ /**< An array of CG indexes; Note that the size of the
+ * array should be 'num_of_congestion_grps_to_consider'.
+ */
+#if DPAA_VERSION >= 11
+ bool pfc_priorities_enable[FM_NUM_CONG_GRPS][FM_MAX_PFC_PRIO];
+ /**< A matrix that represents the map between the CG ids
+ * defined in 'congestion_grps_to_consider' to the
+ * priorities mapping array.
+ */
+#endif /* DPAA_VERSION >= 11 */
+} ioc_fm_port_congestion_groups_t;
+
+
+/*
+ * @Function fm_port_disable
+ *
+ * @Description Gracefully disable an FM port. The port will not start new
+ * tasks after all tasks associated with the port are terminated.
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions This is a blocking routine, it returns after port is
+ * gracefully stopped, i.e. the port will not except new frames,
+ * but it will finish all frames or tasks which were already
+ * began
+ */
+#define FM_PORT_IOC_DISABLE _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(1))
+
+/*
+ * @Function fm_port_enable
+ *
+ * @Description A runtime routine provided to allow disable/enable of port.
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_ENABLE _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(2))
+
+/*
+ * @Function fm_port_set_rate_limit
+ *
+ * @Description Calling this routine enables rate limit algorithm.
+ * By default, this functionality is disabled.
+ *
+ * Note that rate - limit mechanism uses the FM time stamp.
+ * The selected rate limit specified here would be
+ * rounded DOWN to the nearest 16M.
+ *
+ * May be used for Tx and offline parsing ports only
+ *
+ * @Param[in] ioc_fm_port_rate_limit A structure of rate limit
+ * parameters
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_SET_RATE_LIMIT \
+ IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(3), ioc_fm_port_rate_limit_t)
+
+/*
+ * @Function fm_port_delete_rate_limit
+ *
+ * @Description Calling this routine disables the previously enabled rate
+ * limit.
+ *
+ * May be used for Tx and offline parsing ports only
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_DELETE_RATE_LIMIT _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(5))
+#define FM_PORT_IOC_REMOVE_RATE_LIMIT FM_PORT_IOC_DELETE_RATE_LIMIT
+
+/*
+ * @Function fm_port_add_congestion_grps
+ *
+ * @Description This routine effects the corresponding Tx port.
+ * It should be called in order to enable pause frame
+ * transmission in case of congestion in one or more of the
+ * congestion groups relevant to this port.
+ * Each call to this routine may add one or more congestion
+ * groups to be considered relevant to this port.
+ *
+ * May be used for Rx, or RX+OP ports only (depending on chip)
+ *
+ * @Param[in] ioc_fm_port_congestion_groups_t A pointer to an array of
+ * congestion group ids to
+ * consider.
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_ADD_CONGESTION_GRPS \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(34), \
+ ioc_fm_port_congestion_groups_t)
+
+/*
+ * @Function fm_port_remove_congestion_grps
+ *
+ * @Description This routine effects the corresponding Tx port. It should be
+ * called when congestion groups were defined for this port and
+ * are no longer relevant, or pause frames transmitting is not
+ * required on their behalf. Each call to this routine may remove
+ * one or more congestion groups to be considered relevant to
+ * this port.
+ *
+ * May be used for Rx, or RX+OP ports only (depending on chip)
+ *
+ * @Param[in] ioc_fm_port_congestion_groups_t A pointer to an array of
+ * congestion group ids to
+ * consider.
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_REMOVE_CONGESTION_GRPS \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(35), \
+ ioc_fm_port_congestion_groups_t)
+
+/*
+ * @Function fm_port_set_errors_route
+ *
+ * @Description Errors selected for this routine will cause a frame with that
+ * error to be enqueued to error queue.
+ * Errors not selected for this routine will cause a frame with
+ * that error to be enqueued to the one of the other port queues.
+ * By default all errors are defined to be enqueued to error
+ * queue. Errors that were configured to be discarded (at
+ * initialization) may not be selected here.
+ *
+ * May be used for Rx and offline parsing ports only
+ *
+ * @Param[in] ioc_fm_port_frame_err_select_t A list of errors to
+ * enqueue to error queue
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ * (szbs001: How is it possible to have one function that needs
+ * to be called BEFORE fm_port_init() implemented as an ioctl,
+ * which will ALWAYS be called AFTER the fm_port_init() for that
+ I port!?!?!?!???!?!??!?!?)
+ */
+#define FM_PORT_IOC_SET_ERRORS_ROUTE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(4), \
+ ioc_fm_port_frame_err_select_t)
+
+/*
+ * @Group lnx_ioctl_FM_PORT_pcd_runtime_control_grp FM Port PCD Runtime
+ * Control Unit
+ *
+ * @Description FM Port PCD Runtime control unit API functions, definitions
+ * and enums.
+ *
+ * @{
+ */
+
+/*
+ * @Description A structure defining the KG scheme after the parser.
+ * (Must match struct ioc_fm_pcd_kg_scheme_select_t defined in
+ * fm_port_ext.h)
+ *
+ * This is relevant only to change scheme selection mode - from
+ * direct to indirect and vice versa, or when the scheme is
+ * selected directly, to select the scheme id.
+ *
+ */
+typedef struct ioc_fm_pcd_kg_scheme_select_t {
+ bool direct;
+ /**< TRUE to use 'scheme_id' directly, FALSE to use LCV.*/
+ void *scheme_id;
+ /**< Relevant for 'direct'=TRUE only. 'scheme_id' selects the
+ * scheme after parser.
+ */
+} ioc_fm_pcd_kg_scheme_select_t;
+
+/*
+ * @Description Scheme IDs structure
+ * (Must match struct ioc_fm_pcd_port_schemes_params_t defined
+ * in fm_port_ext.h)
+ */
+typedef struct ioc_fm_pcd_port_schemes_params_t {
+ uint8_t num_schemes;
+ /**< Number of schemes for port to be bound to. */
+ void *scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];
+ /**< Array of 'num_schemes' schemes for the port to be bound
+ * to
+ */
+} ioc_fm_pcd_port_schemes_params_t;
+
+/*
+ * @Description A union for defining port protocol parameters for parser
+ * (Must match union u_FmPcdHdrPrsOpts defined in fm_port_ext.h)
+ */
+typedef union ioc_fm_pcd_hdr_prs_opts_u {
+ /* MPLS */
+ struct {
+ bool label_interpretation_enable;
+ /**< When this bit is set, the last MPLS label will be
+ * interpreted as described in HW spec table. When the bit is
+ * cleared, the parser will advance to MPLS next parse
+ */
+ ioc_net_header_type next_parse;
+ /**< must be equal or higher than IPv4 */
+ } mpls_prs_options;
+
+ /* VLAN */
+ struct {
+ uint16_t tag_protocol_id1;
+ /**< User defined Tag Protocol Identifier, to be recognized on
+ * VLAN TAG on top of 0x8100 and 0x88A8
+ */
+ uint16_t tag_protocol_id2;
+ /**< User defined Tag Protocol Identifier, to be recognized on
+ * VLAN TAG on top of 0x8100 and 0x88A8
+ */
+ } vlan_prs_options;
+
+ /* PPP */
+ struct{
+ bool enable_mtu_check;
+ /**< Check validity of MTU according to RFC2516 */
+ } pppoe_prs_options;
+
+ /* IPV6 */
+ struct {
+ bool routing_hdr_disable;
+ /**< Disable routing header */
+ } ipv6_prs_options;
+
+ /* UDP */
+ struct {
+ bool pad_ignore_checksum;
+ /**< TRUE to ignore pad in checksum */
+ } udp_prs_options;
+
+ /* TCP */
+ struct {
+ bool pad_ignore_checksum;
+ /**< TRUE to ignore pad in checksum */
+ } tcp_prs_options;
+} ioc_fm_pcd_hdr_prs_opts_u;
+
+/*
+ * @Description A structure for defining each header for the parser
+ * (must match struct t_FmPcdPrsAdditionalHdrParams defined in
+ * fm_port_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_additional_hdr_params_t {
+ ioc_net_header_type hdr; /**< Selected header */
+ bool err_disable; /**< TRUE to disable error indication */
+ bool soft_prs_enable;
+ /**< Enable jump to SW parser when this header is recognized by
+ * the HW parser.
+ */
+ uint8_t index_per_hdr;
+ /**< Normally 0, if more than one sw parser attachments exists
+ * for the same header, (in the main sw parser code) use this
+ * index to distinguish between them.
+ */
+ bool use_prs_opts; /**< TRUE to use parser options. */
+ ioc_fm_pcd_hdr_prs_opts_u prs_opts;
+ /**< A unuion according to header type, defining the parser
+ * options selected.
+ */
+} ioc_fm_pcd_prs_additional_hdr_params_t;
+
+/*
+ * @Description A structure for defining port PCD parameters
+ * (Must match t_fm_portPcdPrsParams defined in fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_prs_params_t {
+ uint8_t prs_res_priv_info;
+ /**< The private info provides a method of inserting port
+ * information into the parser result. This information may be
+ * extracted by KeyGen and be used for frames distribution when
+ * a per-port distinction is required, it may also be used as a
+ * port logical id for analyzing incoming frames.
+ */
+ uint8_t parsing_offset;
+ /**< Number of bytes from beginning of packet to start parsing
+ */
+ ioc_net_header_type first_prs_hdr;
+ /**< The type of the first header axpected at 'parsing_offset'
+ */
+ bool include_in_prs_statistics;
+ /**< TRUE to include this port in the parser statistics */
+ uint8_t num_of_hdrs_with_additional_params;
+ /**< Normally 0, some headers may get special parameters */
+ ioc_fm_pcd_prs_additional_hdr_params_t
+ additional_params[IOC_FM_PCD_PRS_NUM_OF_HDRS];
+ /**< 'num_of_hdrs_with_additional_params' structures additional
+ * parameters for each header that requires them
+ */
+ bool set_vlan_tpid1;
+ /**< TRUE to configure user selection of Ethertype to indicate a
+ * VLAN tag (in addition to the TPID values 0x8100 and 0x88A8).
+ */
+ uint16_t vlan_tpid1;
+ /**< extra tag to use if set_vlan_tpid1=TRUE. */
+ bool set_vlan_tpid2;
+ /**< TRUE to configure user selection of Ethertype to indicate a
+ * VLAN tag (in addition to the TPID values 0x8100 and 0x88A8).
+ */
+ uint16_t vlan_tpid2;
+ /**< extra tag to use if set_vlan_tpid1=TRUE. */
+} ioc_fm_port_pcd_prs_params_t;
+
+/*
+ * @Description A structure for defining coarse alassification parameters
+ * (Must match t_fm_portPcdCcParams defined in fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_cc_params_t {
+ void *cc_tree_id; /**< CC tree id */
+} ioc_fm_port_pcd_cc_params_t;
+
+/*
+ * @Description A structure for defining keygen parameters
+ * (Must match t_fm_portPcdKgParams defined in fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_kg_params_t {
+ uint8_t num_schemes;
+ /**< Number of schemes for port to be bound to. */
+ void *scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];
+ /**< Array of 'num_schemes' schemes for the port to
+ * be bound to
+ */
+ bool direct_scheme;
+ /**< TRUE for going from parser to a specific scheme,
+ * regardless of parser result
+ */
+ void *direct_scheme_id;
+ /**< Scheme id, as returned by FM_PCD_KgSetScheme;
+ * relevant only if direct=TRUE.
+ */
+} ioc_fm_port_pcd_kg_params_t;
+
+/*
+ * @Description A structure for defining policer parameters
+ * (Must match t_fm_portPcdPlcrParams defined in fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_plcr_params_t {
+ void *plcr_profile_id;
+ /**< Selected profile handle;
+ * relevant in one of the following cases:
+ * e_IOC_FM_PCD_PLCR_ONLY or
+ * e_IOC_FM_PCD_PRS_PLCR were selected, or if
+ * any flow uses a KG scheme where policer profile is not
+ * generated (bypass_plcr_profile_generation selected)
+ */
+} ioc_fm_port_pcd_plcr_params_t;
+
+/*
+ * @Description A structure for defining port PCD parameters
+ * (Must match struct t_fm_portPcdParams defined in
+ * fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_params_t {
+ ioc_fm_port_pcd_support pcd_support;
+ /**< Relevant for Rx and offline ports only.
+ * Describes the active PCD engines for this port.
+ */
+ void *net_env_id; /**< HL Unused in PLCR only mode */
+ ioc_fm_port_pcd_prs_params_t *p_prs_params;
+ /**< Parser parameters for this port */
+ ioc_fm_port_pcd_cc_params_t *p_cc_params;
+ /**< Coarse classification parameters for this port */
+ ioc_fm_port_pcd_kg_params_t *p_kg_params;
+ /**< Keygen parameters for this port */
+ ioc_fm_port_pcd_plcr_params_t *p_plcr_params;
+ /**< Policer parameters for this port */
+ void *p_ip_reassembly_manip;
+ /**< IP Reassembly manipulation */
+#if (DPAA_VERSION >= 11)
+ void *p_capwap_reassembly_manip;
+ /**< CAPWAP Reassembly manipulation */
+#endif /* (DPAA_VERSION >= 11) */
+} ioc_fm_port_pcd_params_t;
+
+/*
+ * @Description A structure for defining the Parser starting point
+ * (Must match struct ioc_fm_pcd_prs_start_t defined in
+ * fm_port_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_start_t {
+ uint8_t parsing_offset;
+ /**< Number of bytes from beginning of packet to start parsing
+ */
+ ioc_net_header_type first_prs_hdr;
+ /**< The type of the first header axpected at 'parsing_offset'
+ */
+} ioc_fm_pcd_prs_start_t;
+
+/*
+ * @Description FQID parameters structure
+ */
+typedef struct ioc_fm_port_pcd_fqids_params_t {
+ uint32_t num_fqids;
+ /**< Number of fqids to be allocated for the port */
+ uint8_t alignment;
+ /**< Alignment required for this port */
+ uint32_t base_fqid;
+ /**< output parameter - the base fqid */
+} ioc_fm_port_pcd_fqids_params_t;
+
+/*
+ * @Function FM_PORT_IOC_ALLOC_PCD_FQIDS
+ *
+ * @Description Allocates FQID's
+ * May be used for Rx and offline parsing ports only
+ *
+ * @Param[in,out] ioc_fm_port_pcd_fqids_params_t Parameters for
+ * allocating FQID's
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_ALLOC_PCD_FQIDS \
+ _IOWR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(19), \
+ ioc_fm_port_pcd_fqids_params_t)
+
+/*
+ * @Function FM_PORT_IOC_FREE_PCD_FQIDS
+ *
+ * @Description Frees previously-allocated FQIDs
+ * May be used for Rx and offline parsing ports only
+ *
+ * @Param[in] uint32_t Base FQID of previously allocated range.
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_FREE_PCD_FQIDS \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(19), uint32_t)
+
+/*
+ * @Function fm_port_set_pcd
+ *
+ * @Description Calling this routine defines the port's PCD configuration.
+ * It changes it from its default configuration which is PCD
+ * disabled (BMI to BMI) and configures it according to the
+ * passed parameters.
+ * May be used for Rx and offline parsing ports only
+ *
+ * @Param[in] ioc_fm_port_pcd_params_t A Structure of parameters
+ * defining the port's PCD
+ * configuration.
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_SET_PCD_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), \
+ ioc_compat_fm_port_pcd_params_t)
+#endif
+#define FM_PORT_IOC_SET_PCD \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_fm_port_pcd_params_t)
+
+/*
+ * @Function fm_port_delete_pcd
+ *
+ * @Description Calling this routine releases the port's PCD configuration.
+ * The port returns to its default configuration which is PCD
+ * disabled (BMI to BMI) and all PCD configuration is removed.
+ * May be used for Rx and offline parsing ports which are in PCD
+ * mode only
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_DELETE_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(21))
+
+/*
+ * @Function fm_port_attach_pcd
+ *
+ * @Description This routine may be called after fm_port_detach_pcd was
+ * called, to return to the originally configured PCD support
+ * flow. The couple of routines are used to allow PCD
+ * configuration changes that demand that PCD will not be used
+ * while changes take place.
+ *
+ * May be used for Rx and offline parsing ports which are in PCD
+ * mode only
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_ATTACH_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(23))
+
+/*
+ * @Function fm_port_detach_pcd
+ *
+ * @Description Calling this routine detaches the port from its PCD
+ * functionality. The port returns to its default flow which is
+ * BMI to BMI.
+ *
+ * May be used for Rx and offline parsing ports which are in PCD
+ * mode only
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_DETACH_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(22))
+
+/*
+ * @Function fm_port_pcd_plcr_alloc_profiles
+ *
+ * @Description This routine may be called only for ports that use the Policer
+ * in order to allocate private policer profiles.
+ *
+ * @Param[in] uint16_t The number of required policer profiles
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed before fm_port_set_pcd() only.
+ */
+#define FM_PORT_IOC_PCD_PLCR_ALLOC_PROFILES \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(24), uint16_t)
+
+/*
+ * @Function fm_port_pcd_plcr_free_profiles
+ *
+ * @Description This routine should be called for freeing private policer
+ * profiles.
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed before fm_port_set_pcd() only.
+ */
+#define FM_PORT_IOC_PCD_PLCR_FREE_PROFILES \
+ _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(25))
+
+/*
+ * @Function fm_port_pcd_kg_modify_initial_scheme
+ *
+ * @Description This routine may be called only for ports that use the keygen
+ * in order to change the initial scheme frame should be routed
+ * to.The change may be of a scheme id (in case of direct mode),
+ * from direct to indirect, or from indirect to direct -
+ * specifying the scheme id.
+ *
+ * @Param[in] ioc_fm_pcd_kg_scheme_select_t
+ * A structure of parameters for defining whether a scheme is
+ * direct/indirect, and if direct - scheme id.
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), \
+ ioc_compat_fm_pcd_kg_scheme_select_t)
+#endif
+#define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), \
+ ioc_fm_pcd_kg_scheme_select_t)
+
+/*
+ * @Function fm_port_pcd_plcr_modify_initial_profile
+ *
+ * @Description This routine may be called for ports with flows
+ * e_IOC_FM_PCD_SUPPORT_PLCR_ONLY or
+ * e_IOC_FM_PCD_SUPPORT_PRS_AND_PLCR only, to change the initial
+ * Policer profile frame should be routed to.
+ * The change may be of a profile and / or absolute / direct mode
+ * selection.
+ *
+ * @Param[in] ioc_fm_obj_t Policer profile Id as returned from
+ * FM_PCD_PlcrSetProfile.
+ *
+ * @Return 0 on success; error code otherwise.
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_compat_fm_obj_t)
+#endif
+#define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_fm_obj_t)
+
+/*
+ * @Function fm_port_pcd_cc_modify_tree
+ *
+ * @Description This routine may be called to change this port connection to
+ * a pre - initializes coarse classification Tree.
+ *
+ * @Param[in] ioc_fm_obj_t Id of new coarse classification tree selected
+ * for this port.
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_set_pcd() and
+ * fm_port_detach_pcd()
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_CC_MODIFY_TREE_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_compat_fm_obj_t)
+#endif
+#define FM_PORT_IOC_PCD_CC_MODIFY_TREE \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_fm_obj_t)
+
+/*
+ * @Function fm_port_pcd_kg_bind_schemes
+ *
+ * @Description These routines may be called for modifying the binding of
+ * ports to schemes. The scheme itself is not added, just this
+ * specific port starts using it.
+ *
+ * @Param[in] ioc_fm_pcd_port_schemes_params_t Schemes parameters
+ * structre
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_set_pcd().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_KG_BIND_SCHEMES_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), \
+ ioc_compat_fm_pcd_port_schemes_params_t)
+#endif
+#define FM_PORT_IOC_PCD_KG_BIND_SCHEMES \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), \
+ ioc_fm_pcd_port_schemes_params_t)
+
+/*
+ * @Function fm_port_pcd_kg_unbind_schemes
+ *
+ * @Description These routines may be called for modifying the binding of
+ * ports to schemes. The scheme itself is not removed or
+ * invalidated, just this specific port stops using it.
+ *
+ * @Param[in] ioc_fm_pcd_port_schemes_params_t Schemes parameters
+ * structre
+ *
+ * @Return 0 on success; error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_set_pcd().
+ */
+#if defined(CONFIG_COMPAT)
+#define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES_COMPAT \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), \
+ ioc_compat_fm_pcd_port_schemes_params_t)
+#endif
+#define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), \
+ ioc_fm_pcd_port_schemes_params_t)
+
+#define ENET_NUM_OCTETS_PER_ADDRESS 6
+ /**< Number of octets (8-bit bytes) in an ethernet address */
+typedef struct ioc_fm_port_mac_addr_params_t {
+ uint8_t addr[ENET_NUM_OCTETS_PER_ADDRESS];
+} ioc_fm_port_mac_addr_params_t;
+
+/*
+ * @Function FM_MAC_AddHashMacAddr
+ *
+ * @Description Add an Address to the hash table. This is for filter purpose
+ * only.
+ *
+ * @Param[in] ioc_fm_port_mac_addr_params_t Ethernet Mac address
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_MAC_Init(). It is a filter only
+ * address.
+ * @Cautions Some address need to be filtered out in upper FM blocks.
+ */
+#define FM_PORT_IOC_ADD_RX_HASH_MAC_ADDR \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(36), \
+ ioc_fm_port_mac_addr_params_t)
+
+/*
+ * @Function FM_MAC_RemoveHashMacAddr
+ *
+ * @Description Delete an Address to the hash table. This is for filter
+ * purpose only.
+ *
+ * @Param[in] ioc_fm_port_mac_addr_params_t Ethernet Mac address
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_MAC_Init().
+ */
+#define FM_PORT_IOC_REMOVE_RX_HASH_MAC_ADDR \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(37), \
+ ioc_fm_port_mac_addr_params_t)
+
+typedef struct ioc_fm_port_tx_pause_frames_t {
+ uint8_t priority;
+ uint16_t pause_time;
+ uint16_t thresh_time;
+} ioc_fm_port_tx_pause_frames_t;
+
+/*
+ * @Function FM_MAC_SetTxPauseFrames
+ *
+ * @Description Enable/Disable transmission of Pause-Frames. The routine
+ * changes the default configuration: pause-time - [0xf000]
+ * threshold-time - [0]
+ *
+ * @Param[in] ioc_fm_port_tx_pause_frames_params_t
+ * A structure holding the required parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_MAC_Init(). PFC is supported only on
+ * new mEMAC; i.e. in MACs that don't have PFC support (10G-MAC
+ * and dTSEC), user should use 'FM_MAC_NO_PFC' in the 'priority'
+ * field.
+ */
+#define FM_PORT_IOC_SET_TX_PAUSE_FRAMES \
+ _IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(40), \
+ ioc_fm_port_tx_pause_frames_t)
+
+typedef struct ioc_fm_port_mac_statistics_t {
+ /* RMON */
+ uint64_t e_stat_pkts_64;
+ /**< r-10G tr-DT 64 byte frame counter */
+ uint64_t e_stat_pkts_65_to_127;
+ /**< r-10G 65 to 127 byte frame counter */
+ uint64_t e_stat_pkts_128_to_255;
+ /**< r-10G 128 to 255 byte frame counter */
+ uint64_t e_stat_pkts_256_to_511;
+ /**< r-10G 256 to 511 byte frame counter */
+ uint64_t e_stat_pkts_512_to_1023;
+ /**< r-10G 512 to 1023 byte frame counter*/
+ uint64_t e_stat_pkts_1024_to_1518;
+ /**< r-10G 1024 to 1518 byte frame counter */
+ uint64_t e_stat_pkts_1519_to_1522;
+ /**< r-10G 1519 to 1522 byte good frame count */
+ /* */
+ uint64_t e_stat_fragments;
+ /**< Total number of packets that were less than 64 octets long
+ * with a wrong CRC.
+ */
+ uint64_t e_stat_jabbers;
+ /**< Total number of packets longer than valid maximum length
+ * octets
+ */
+ uint64_t e_stat_drop_events;
+ /**< number of dropped packets due to internal errors of the MAC
+ * Client (during receive).
+ */
+ uint64_t e_stat_CRC_align_errors;
+ /**< Incremented when frames of correct length but with CRC
+ * error are received.
+ */
+ uint64_t e_stat_undersize_pkts;
+ /**< Incremented for frames under 64 bytes with a valid FCS and
+ * otherwise well formed; This count does not include range
+ * length errors
+ */
+ uint64_t e_stat_oversize_pkts;
+ /**< Incremented for frames which exceed 1518 (non VLAN) or 1522
+ * (VLAN) and contains a valid FCS and otherwise well formed
+ */
+ /* Pause */
+ uint64_t te_stat_pause; /**< Pause MAC Control received */
+ uint64_t re_stat_pause; /**< Pause MAC Control sent */
+ /* MIB II */
+ uint64_t if_in_octets; /**< Total number of byte received. */
+ uint64_t if_in_pkts; /**< Total number of packets received.*/
+ uint64_t if_in_ucast_pkts;
+ /**< Total number of unicast frame received;
+ * NOTE: this counter is not supported on dTSEC MAC
+ */
+ uint64_t if_in_mcast_pkts;
+ /**< Total number of multicast frame received*/
+ uint64_t if_in_bcast_pkts;
+ /**< Total number of broadcast frame received */
+ uint64_t if_in_discards;
+ /**< Frames received, but discarded due to problems within the
+ * MAC RX.
+ */
+ uint64_t if_in_errors;
+ /**< Number of frames received with error:
+ * - FIFO Overflow Error
+ * - CRC Error
+ * - Frame Too Long Error
+ * - Alignment Error
+ * - The dedicated Error Code (0xfe, not a code error) was
+ * received
+ */
+ uint64_t if_out_octets; /**< Total number of byte sent. */
+ uint64_t if_out_pkts; /**< Total number of packets sent .*/
+ uint64_t if_out_ucast_pkts;
+ /**< Total number of unicast frame sent;
+ * NOTE: this counter is not supported on dTSEC MAC
+ */
+ uint64_t if_out_mcast_pkts;
+ /**< Total number of multicast frame sent */
+ uint64_t if_out_bcast_pkts;
+ /**< Total number of multicast frame sent */
+ uint64_t if_out_discards;
+ /**< Frames received, but discarded due to problems within the
+ * MAC TX N/A!.
+ */
+ uint64_t if_out_errors;
+ /**< Number of frames transmitted with error:
+ * - FIFO Overflow Error
+ * - FIFO Underflow Error
+ * - Other
+ */
+} ioc_fm_port_mac_statistics_t;
+
+/*
+ * @Function FM_MAC_GetStatistics
+ *
+ * @Description get all MAC statistics counters
+ *
+ * @Param[out] ioc_fm_port_mac_statistics_t A structure holding the
+ * statistics
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following FM_Init().
+ */
+#define FM_PORT_IOC_GET_MAC_STATISTICS \
+ _IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(41), \
+ ioc_fm_port_mac_statistics_t)
+
+/*
+ * @Function fm_port_get_bmi_counters
+ *
+ * @Description Read port's BMI stat counters and place them into
+ * a designated structure of counters.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[out] p_bmi_stats counters structure
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+
+#define FM_PORT_IOC_GET_BMI_COUNTERS \
+ _IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(42), ioc_fm_port_bmi_stats_t)
+
+/** @} */ /* end of lnx_ioctl_FM_PORT_pcd_runtime_control_grp group */
+/** @} */ /* end of lnx_ioctl_FM_PORT_runtime_control_grp group */
+
+/** @} */ /* end of lnx_ioctl_FM_PORT_grp group */
+/** @} */ /* end of lnx_ioctl_FM_grp group */
+
+
+/*
+ * @Group gen_id General Drivers Utilities
+ *
+ * @Description External routines.
+ *
+ * @{
+ */
+
+/*
+ * @Group gen_error_id Errors, Events and Debug
+ *
+ * @Description External routines.
+ *
+ * @{
+ */
+
+/*
+ * The scheme below provides the bits description for error codes:
+ *
+ * 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+ * | Reserved (should be zero) | Module ID |
+ *
+ * 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * | Error Type |
+ */
+
+#define ERROR_CODE(_err) ((((uint32_t)_err) & 0x0000FFFF) | __ERR_MODULE__)
+
+#define GET_ERROR_TYPE(_errcode) ((_errcode) & 0x0000FFFF)
+ /**< Extract module code from error code (#uint32_t) */
+
+#define GET_ERROR_MODULE(_errcode) ((_errcode) & 0x00FF0000)
+ /**< Extract error type (#e_error_type) from
+ * error code (#uint32_t)
+ */
+
+#define RETURN_ERROR(_level, _err, _vmsg) { return ERROR_CODE(_err); }
+
+/*
+ * @Description Error Type Enumeration
+ */
+typedef enum e_error_type {
+ E_OK = 0
+ /* Never use "RETURN_ERROR" with E_OK; Use "return E_OK;"*/
+ , E_WRITE_FAILED = EIO
+ /**< Write access failed on memory/device.*/
+ /* String: none, or device name.*/
+ , E_NO_DEVICE = ENXIO
+ /**< The associated device is not initialized.*/
+ /* String: none.*/
+ , E_NOT_AVAILABLE = EAGAIN
+ /**< Resource is unavailable.*/
+ /* String: none, unless the operation is not the main goal of
+ * the function (in this case add resource description).
+ */
+ , E_NO_MEMORY = ENOMEM
+ /**< External memory allocation failed.*/
+ /* String: description of item for which allocation failed. */
+ , E_INVALID_ADDRESS = EFAULT
+ /**< Invalid address.*/
+ /* String: description of the specific violation.*/
+ , E_BUSY = EBUSY
+ /**< Resource or module is busy.*/
+ /* String: none, unless the operation is not the main goal
+ * of the function (in this case add resource
+ * description).
+ */
+ , E_ALREADY_EXISTS = EEXIST
+ /**< Requested resource or item already exists.*/
+ /* Use when resource duplication or sharing are not allowed.
+ * String: none, unless the operation is not the main goal
+ * of the function (in this case add item description).
+ */
+ , E_INVALID_OPERATION = ENODEV
+ /**< The operation/command is invalid (unrecognized).*/
+ /* String: none.*/
+ , E_INVALID_VALUE = EDOM
+ /**< Invalid value.*/
+ /* Use for non-enumeration parameters, and only when other error
+ * types are not suitable.
+ * String: parameter description + "(should be <attribute>)",
+ * e.g: "Maximum Rx buffer length (should be divisible
+ * by 8)", "Channel number (should be even)".
+ */
+ , E_NOT_IN_RANGE = ERANGE
+ /**< Parameter value is out of range.*/
+ /* Don't use this error for enumeration parameters.
+ * String: parameter description + "(should be %d-%d)",
+ * e.g: "Number of pad characters (should be 0-15)".
+ */
+ , E_NOT_SUPPORTED = ENOSYS
+ /**< The function is not supported or not implemented.*/
+ /* String: none.*/
+ , E_INVALID_STATE
+ /**< The operation is not allowed in current module state.*/
+ /* String: none.*/
+ , E_INVALID_HANDLE
+ /**< Invalid handle of module or object.*/
+ /* String: none, unless the function takes in more than one
+ * handle (in this case add the handle description)
+ */
+ , E_INVALID_ID
+ /**< Invalid module ID (usually enumeration or index).*/
+ /* String: none, unless the function takes in more than one ID
+ * (in this case add the ID description)
+ */
+ , E_NULL_POINTER
+ /**< Unexpected NULL pointer.*/
+ /* String: pointer description.*/
+ , E_INVALID_SELECTION
+ /**< Invalid selection or mode.*/
+ /* Use for enumeration values, only when other error types are
+ * not suitable.
+ * String: parameter description.
+ */
+ , E_INVALID_COMM_MODE
+ /**< Invalid communication mode.*/
+ /* String: none, unless the function takes in more than one
+ * communication mode indications (in this case add
+ * parameter description).
+ */
+ , E_INVALID_MEMORY_TYPE
+ /**< Invalid memory type.*/
+ /* String: none, unless the function takes in more than one
+ * memory types (in this case add memory description,
+ * e.g: "Data memory", "Buffer descriptors memory").
+ */
+ , E_INVALID_CLOCK
+ /**< Invalid clock.*/
+ /* String: none, unless the function takes in more than one
+ * clocks (in this case add clock description, e.g: "Rx
+ * clock", "Tx clock").
+ */
+ , E_CONFLICT
+ /**< Some setting conflicts with another setting.*/
+ /* String: description of the conflicting settings.*/
+ , E_NOT_ALIGNED
+ /**< Non-aligned address.*/
+ /* String: parameter description + "(should be %d-bytes
+ * aligned)", e.g: "Rx data buffer (should be 32-bytes
+ * aligned)".
+ */
+ , E_NOT_FOUND
+ /**< Requested resource or item was not found.*/
+ /* Use only when the resource/item is uniquely identified.
+ * String: none, unless the operation is not the main goal
+ * of the function (in this case add item description).
+ */
+ , E_FULL
+ /**< Resource is full.*/
+ /* String: none, unless the operation is not the main goal of
+ * the function (in this case add resource description).
+ */
+ , E_EMPTY
+ /**< Resource is empty.*/
+ /* String: none, unless the operation is not the main goal of
+ * the function (in this case add resource description).
+ */
+ , E_ALREADY_FREE
+ /**< Specified resource or item is already free or deleted.*/
+ /* String: none, unless the operation is not the main goal
+ * of the function (in this case add item description).
+ */
+ , E_READ_FAILED
+ /**< Read access failed on memory/device.*/
+ /* String: none, or device name.*/
+ , E_INVALID_FRAME
+ /**< Invalid frame object (NULL handle or missing buffers).*/
+ /* String: none.*/
+ , E_SEND_FAILED
+ /**< Send operation failed on device.*/
+ /* String: none, or device name.*/
+ , E_RECEIVE_FAILED
+ /**< Receive operation failed on device.*/
+ /* String: none, or device name.*/
+ , E_TIMEOUT/* = ETIMEDOUT*/
+ /**< The operation timed out.*/
+ /* String: none.*/
+
+ , E_DUMMY_LAST /* NEVER USED */
+
+} e_error_type;
+
+/*
+ *
+ * @Group FM_grp Frame Manager API
+ *
+ * @Description FM API functions, definitions and enums
+ *
+ * @{
+ */
+
+/*
+ * @Group FM_PORT_grp FM Port
+ *
+ * @Description FM Port API
+ *
+ * The FM uses a general module called "port" to represent a Tx
+ * port (MAC), an Rx port (MAC) or Offline Parsing port. The
+ * number of ports in an FM varies between SOCs. The SW driver
+ * manages these ports as sub-modules of the FM, i.e. after an FM
+ * is initialized, its ports may be initialized and operated
+ * upon.
+ *
+ * The port is initialized aware of its type, but other functions
+ * on a port may be indifferent to its type. When necessary, the
+ * driver verifies coherence and returns error if applicable.
+ *
+ * On initialization, user specifies the port type and it's index
+ * (relative to the port's type) - always starting at 0.
+ *
+ * @{
+ */
+
+/*
+ * @Description An enum for defining port PCD modes.
+ * This enum defines the superset of PCD engines support - i.e.
+ * not all engines have to be used, but all have to be enabled.
+ * The real flow of a specific frame depends on the PCD
+ * configuration and the frame headers and payload. Note: the
+ * first engine and the first engine after the parser (if exists)
+ * should be in order, the order is important as it will define
+ * the flow of the port. However, as for the rest engines (the
+ * ones that follows), the order is not important anymore as it
+ * is defined by the PCD graph itself.
+ */
+typedef enum e_fm_port_pcd_support {
+ e_FM_PORT_PCD_SUPPORT_NONE = 0
+ /**< BMI to BMI, PCD is not used */
+ , e_FM_PORT_PCD_SUPPORT_PRS_ONLY
+ /**< Use only Parser */
+ , e_FM_PORT_PCD_SUPPORT_PLCR_ONLY
+ /**< Use only Policer */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR
+ /**< Use Parser and Policer */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG
+ /**< Use Parser and Keygen */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC
+ /**< Use Parser, Keygen and Coarse Classification */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR
+ /**< Use all PCD engines */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR
+ /**< Use Parser, Keygen and Policer */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_CC
+ /**< Use Parser and Coarse Classification */
+ , e_FM_PORT_PCD_SUPPORT_PRS_AND_CC_AND_PLCR
+ /**< Use Parser and Coarse Classification and Policer */
+ , e_FM_PORT_PCD_SUPPORT_CC_ONLY
+ /**< Use only Coarse Classification */
+#ifdef FM_CAPWAP_SUPPORT
+ , e_FM_PORT_PCD_SUPPORT_CC_AND_KG
+ /**< Use Coarse Classification,and Keygen */
+ , e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR
+ /**< Use Coarse Classification, Keygen and Policer */
+#endif /* FM_CAPWAP_SUPPORT */
+} e_fm_port_pcd_support;
+
+/*
+ * @Description Port interrupts
+ */
+typedef enum e_fm_port_exceptions {
+ e_FM_PORT_EXCEPTION_IM_BUSY /**< Independent-Mode Rx-BUSY */
+} e_fm_port_exceptions;
+
+/*
+ * @Collection General FM Port defines
+ */
+#define FM_PORT_PRS_RESULT_NUM_OF_WORDS 8
+ /**< Number of 4 bytes words in parser result */
+/* @} */
+
+/*
+ * @Collection FM Frame error
+ */
+typedef uint32_t fm_port_frame_err_select_t;
+ /**< typedef for defining Frame Descriptor errors */
+
+#define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT FM_FD_ERR_UNSUPPORTED_FORMAT
+ /**< Not for Rx-Port! Unsupported Format */
+#define FM_PORT_FRM_ERR_LENGTH FM_FD_ERR_LENGTH
+ /**< Not for Rx-Port! Length Error */
+#define FM_PORT_FRM_ERR_DMA FM_FD_ERR_DMA /**< DMA Data error */
+#define FM_PORT_FRM_ERR_NON_FM FM_FD_RX_STATUS_ERR_NON_FM
+ /**< non Frame-Manager error; probably come from SEC
+ * that was chained to FM
+ */
+
+#define FM_PORT_FRM_ERR_IPRE (FM_FD_ERR_IPR & ~FM_FD_IPR)
+ /**< IPR error */
+#define FM_PORT_FRM_ERR_IPR_NCSP (FM_FD_ERR_IPR_NCSP & ~FM_FD_IPR)
+ /**< IPR non-consistent-sp */
+
+#define FM_PORT_FRM_ERR_IPFE 0
+ /**< Obsolete; will be removed in the future */
+
+#ifdef FM_CAPWAP_SUPPORT
+#define FM_PORT_FRM_ERR_CRE FM_FD_ERR_CRE
+#define FM_PORT_FRM_ERR_CHE FM_FD_ERR_CHE
+#endif /* FM_CAPWAP_SUPPORT */
+
+#define FM_PORT_FRM_ERR_PHYSICAL FM_FD_ERR_PHYSICAL
+ /**< Rx FIFO overflow, FCS error, code error, running
+ * disparity error (SGMII and TBI modes), FIFO parity
+ * error. PHY Sequence error, PHY error control
+ * character detected.
+ */
+#define FM_PORT_FRM_ERR_SIZE FM_FD_ERR_SIZE
+ /**< Frame too long OR Frame size exceeds
+ * max_length_frame
+ */
+#define FM_PORT_FRM_ERR_CLS_DISCARD FM_FD_ERR_CLS_DISCARD
+ /**< indicates a classifier "drop" operation */
+#define FM_PORT_FRM_ERR_EXTRACTION FM_FD_ERR_EXTRACTION
+ /**< Extract Out of Frame */
+#define FM_PORT_FRM_ERR_NO_SCHEME FM_FD_ERR_NO_SCHEME
+ /**< No Scheme Selected */
+#define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW FM_FD_ERR_KEYSIZE_OVERFLOW
+ /**< Keysize Overflow */
+#define FM_PORT_FRM_ERR_COLOR_RED FM_FD_ERR_COLOR_RED
+ /**< Frame color is red */
+#define FM_PORT_FRM_ERR_COLOR_YELLOW FM_FD_ERR_COLOR_YELLOW
+ /**< Frame color is yellow */
+#define FM_PORT_FRM_ERR_ILL_PLCR FM_FD_ERR_ILL_PLCR
+ /**< Illegal Policer Profile selected */
+#define FM_PORT_FRM_ERR_PLCR_FRAME_LEN FM_FD_ERR_PLCR_FRAME_LEN
+ /**< Policer frame length error */
+#define FM_PORT_FRM_ERR_PRS_TIMEOUT FM_FD_ERR_PRS_TIMEOUT
+ /**< Parser Time out Exceed */
+#define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT FM_FD_ERR_PRS_ILL_INSTRUCT
+ /**< Invalid Soft Parser instruction */
+#define FM_PORT_FRM_ERR_PRS_HDR_ERR FM_FD_ERR_PRS_HDR_ERR
+ /**< Header error was identified during parsing */
+#define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED FM_FD_ERR_BLOCK_LIMIT_EXCEEDED
+ /**< Frame parsed beyind 256 first bytes */
+#define FM_PORT_FRM_ERR_PROCESS_TIMEOUT 0x00000001
+ /**< FPM Frame Processing Timeout Exceeded */
+/* @} */
+
+
+/*
+ * @Group FM_PORT_init_grp FM Port Initialization Unit
+ *
+ * @Description FM Port Initialization Unit
+ *
+ * @{
+ */
+
+/*
+ * @Description Exceptions user callback routine, will be called upon an
+ * exception passing the exception identification.
+ *
+ * @Param[in] h_app User's application descriptor.
+ * @Param[in] exception The exception.
+ */
+typedef void (t_fm_port_exception_callback) (t_handle h_app,
+ e_fm_port_exceptions exception);
+
+/*
+ * @Description User callback function called by driver with received data.
+ * User provides this function. Driver invokes it.
+ *
+ * @Param[in] h_app Application's handle originally specified to
+ * the API Config function
+ * @Param[in] p_data A pointer to data received
+ * @Param[in] length length of received data
+ * @Param[in] status receive status and errors
+ * @Param[in] position position of buffer in frame
+ * @Param[in] h_buf_context A handle of the user acossiated with this buffer
+ *
+ * @Retval e_RX_STORE_RESPONSE_CONTINUE
+ * order the driver to continue Rx operation for all ready data.
+ * @Retval e_RX_STORE_RESPONSE_PAUSE
+ * order the driver to stop Rx operation.
+ */
+typedef e_rx_store_response(t_fm_port_im_rx_store_callback) (t_handle h_app,
+ uint8_t *p_data,
+ uint16_t length,
+ uint16_t status,
+ uint8_t position,
+ t_handle h_buf_context);
+
+/*
+ * @Description User callback function called by driver when transmit
+ * completed.
+ * User provides this function. Driver invokes it.
+ *
+ * @Param[in] h_app Application's handle originally specified to
+ * the API Config function
+ * @Param[in] p_data A pointer to data received
+ * @Param[in] status transmit status and errors
+ * @Param[in] last_buffer is last buffer in frame
+ * @Param[in] h_buf_context A handle of the user acossiated with this buffer
+ */
+typedef void (t_fm_port_im_tx_conf_callback) (t_handle h_app,
+ uint8_t *p_data,
+ uint16_t status,
+ t_handle h_buf_context);
+
+/*
+ * @Description A structure for additional Rx port parameters
+ */
+typedef struct t_fm_port_rx_params {
+ uint32_t err_fqid; /**< Error Queue Id. */
+ uint32_t dflt_fqid; /**< Default Queue Id.*/
+ uint16_t liodn_offset; /**< Port's LIODN offset. */
+ t_fm_ext_pools ext_buf_pools;
+ /**< Which external buffer pools are used
+ * (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes
+ */
+} t_fm_port_rx_params;
+
+/*
+ * @Description A structure for additional non-Rx port parameters
+ */
+typedef struct t_fm_port_non_rx_params {
+ uint32_t err_fqid; /**< Error Queue Id. */
+ uint32_t dflt_fqid;
+ /**< For Tx - Default Confirmation queue,
+ * 0 means no Tx confirmation for processed frames.
+ * For OP port - default Rx queue.
+ */
+ uint32_t qm_channel;
+ /**< QM-channel dedicated to this port; will be used by
+ * the FM for dequeue.
+ */
+} t_fm_port_non_rx_params;
+
+/*
+ * @Description A structure for additional Rx port parameters
+ */
+typedef struct t_fm_port_im_rx_tx_params {
+ t_handle h_fm_muram;
+ /**< A handle of the FM-MURAM partition */
+ uint16_t liodn_offset;
+ /**< For Rx ports only. Port's LIODN Offset. */
+ uint8_t data_mem_id;
+ /**< Memory partition ID for data buffers */
+ uint32_t data_mem_attributes;
+ /**< Memory attributes for data buffers */
+ t_buffer_pool_info rx_pool_params;
+ /**< For Rx ports only. */
+ t_fm_port_im_rx_store_callback *f_rx_store;
+ /**< For Rx ports only. */
+ t_fm_port_im_tx_conf_callback *f_tx_conf;
+ /**< For Tx ports only. */
+} t_fm_port_im_rx_tx_params;
+
+/*
+ * @Description A union for additional parameters depending on port type
+ */
+typedef union u_fm_port_specific_params {
+ t_fm_port_im_rx_tx_params im_rx_tx_params;
+ /**< Rx/Tx Independent-Mode port parameter structure */
+ t_fm_port_rx_params rx_params;
+ /**< Rx port parameters structure */
+ t_fm_port_non_rx_params non_rx_params;
+ /**< Non-Rx port parameters structure */
+} u_fm_port_specific_params;
+
+/*
+ * @Description A structure representing FM initialization parameters
+ */
+typedef struct t_fm_port_params {
+ uintptr_t base_addr;
+ /**< Virtual Address of memory mapped FM Port registers.
+ */
+ t_handle h_fm;
+ /**< A handle to the FM object this port related to */
+ e_fm_port_type port_type; /**< Port type */
+ uint8_t port_id;
+ /**< Port Id - relative to type;
+ * NOTE: When configuring Offline Parsing port for
+ * FMANv3 devices (DPAA_VERSION 11 and higher),
+ * it is highly recommended NOT to use port_id=0 due to
+ * lack of HW resources on port_id=0.
+ */
+ bool independent_mode_enable;
+ /**< This port is Independent-Mode - Used for Rx/Tx
+ * ports only!
+ */
+ uint16_t liodn_base;
+ /**< Irrelevant for P4080 rev 1. LIODN base for this
+ * port, to be used together with LIODN offset.
+ */
+ u_fm_port_specific_params specific_params;
+ /**< Additional parameters depending on port type. */
+
+ t_fm_port_exception_callback *f_exception;
+ /**< Relevant for IM only Callback routine to be called
+ * on BUSY exception
+ */
+ t_handle h_app;
+ /**< A handle to an application layer object; This
+ * handle will be passed by the driver upon calling the
+ * above callbacks
+ */
+} t_fm_port_params;
+
+/*
+ * @Function fm_port_config
+ *
+ * @Description Creates a descriptor for the FM PORT module.
+ *
+ * The routine returns a handle(descriptor) to the FM PORT
+ * object. This descriptor must be passed as first parameter to
+ * all other FM PORT function calls.
+ *
+ * No actual initialization or configuration of FM hardware is
+ * done by this routine.
+ *
+ * @Param[in] p_fm_port_params Pointer to data structure of parameters
+ *
+ * @Retval Handle to FM object, or NULL for Failure.
+ */
+t_handle fm_port_config(t_fm_port_params *p_fm_port_params);
+
+/*
+ * @Function fm_port_init
+ *
+ * @Description Initializes the FM PORT module by defining the software
+ * structure and configuring the hardware registers.
+ *
+ * @Param[in] h_fm_port - FM PORT module descriptor
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+uint32_t fm_port_init(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_free
+ *
+ * @Description Frees all resources that were assigned to FM PORT module.
+ *
+ * Calling this routine invalidates the descriptor.
+ *
+ * @Param[in] h_fm_port - FM PORT module descriptor
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+uint32_t fm_port_free(t_handle h_fm_port);
+
+t_handle fm_port_open(t_fm_port_params *p_fm_port_params);
+void fm_port_close(t_handle h_fm_port);
+
+
+/*
+ * @Group FM_PORT_advanced_init_grp FM Port Advanced Configuration
+ * Unit
+ *
+ * @Description Configuration functions used to change default values.
+ *
+ * @{
+ */
+
+/*
+ * @Description enum for defining QM frame dequeue
+ */
+typedef enum e_fm_port_deq_type {
+ e_FM_PORT_DEQ_TYPE1,
+ /**< Dequeue from the SP channel - with priority precedence,
+ * and Intra-Class Scheduling respected.
+ */
+ e_FM_PORT_DEQ_TYPE2,
+ /**< Dequeue from the SP channel - with active FQ precedence,
+ * and Intra-Class Scheduling respected.
+ */
+ e_FM_PORT_DEQ_TYPE3
+ /**< Dequeue from the SP channel - with active FQ precedence,
+ * and override Intra-Class Scheduling
+ */
+} e_fm_port_deq_type;
+
+/*
+ * @Description enum for defining QM frame dequeue
+ */
+typedef enum e_fm_port_deq_prefetch_option {
+ e_FM_PORT_DEQ_NO_PREFETCH,
+ /**< QMI preforms a dequeue action for a single frame
+ * only when a dedicated portID Tnum is waiting.
+ */
+ e_FM_PORT_DEQ_PARTIAL_PREFETCH,
+ /**< QMI preforms a dequeue action for 3 frames
+ * when one dedicated port_id tnum is waiting.
+ */
+ e_FM_PORT_DEQ_FULL_PREFETCH
+ /**< QMI preforms a dequeue action for 3 frames when
+ * no dedicated port_id tnums are waiting.
+ */
+
+} e_fm_port_deq_prefetch_option;
+
+/*
+ * @Description enum for defining port default color
+ */
+typedef enum e_fm_port_color {
+ e_FM_PORT_COLOR_GREEN, /**< Default port color is green */
+ e_FM_PORT_COLOR_YELLOW, /**< Default port color is yellow */
+ e_FM_PORT_COLOR_RED, /**< Default port color is red */
+ e_FM_PORT_COLOR_OVERRIDE/**< Ignore color */
+} e_fm_port_color;
+
+/*
+ * @Description A structure for defining Dual Tx rate limiting scale
+ */
+typedef enum e_fm_port_dual_rate_limiter_scale_down {
+ e_FM_PORT_DUAL_RATE_LIMITER_NONE = 0,
+ /**< Use only single rate limiter*/
+ e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2,
+ /**< Divide high rate limiter by 2 */
+ e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4,
+ /**< Divide high rate limiter by 4 */
+ e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8
+ /**< Divide high rate limiter by 8 */
+} e_fm_port_dual_rate_limiter_scale_down;
+
+/*
+ * @Description A structure for defining FM port resources
+ */
+typedef struct t_fm_port_rsrc {
+ uint32_t num;
+ /**< Committed required resource */
+ uint32_t extra;
+ /**< Extra (not committed) required resource */
+} t_fm_port_rsrc;
+
+/*
+ * @Description A structure for defining observed pool depletion
+ */
+typedef struct t_fm_port_observed_buf_pool_depletion {
+ t_fm_buf_pool_depletion pool_depletion_params;
+ /**< parameters to define pool depletion */
+ t_fm_ext_pools pools_params;
+ /**< Which external buffer pools are observed
+ * (up to FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS),
+ * and their sizes.
+ */
+} t_fm_port_observed_buf_pool_depletion;
+
+/*
+ * @Description A structure for defining Tx rate limiting
+ */
+typedef struct t_fm_port_rate_limit {
+ uint16_t max_burst_size;
+ /**< in KBytes for Tx ports, in frames for OP
+ * ports. (note that for early chips burst size
+ * is rounded up to a multiply of 1000 frames).
+ */
+ uint32_t rate_limit;
+ /**< in Kb/sec for Tx ports, in frame/sec for OP
+ * ports. Rate limit refers to data rate
+ * (rather than line rate).
+ */
+ e_fm_port_dual_rate_limiter_scale_down rate_limit_divider;
+ /**< For OP ports only. Not-valid for some
+ * earlier chip revisions
+ */
+} t_fm_port_rate_limit;
+
+/*
+ * @Description A structure for defining the parameters of
+ * the Rx port performance counters
+ */
+typedef struct t_fm_port_performance_cnt {
+ uint8_t task_comp_val;
+ /**< Task compare value */
+ uint8_t queue_comp_val;
+ /**< Rx queue/Tx confirm queue compare value (unused for H/O) */
+ uint8_t dma_comp_val;
+ /**< Dma compare value */
+ uint32_t fifo_comp_val;
+ /**< Fifo compare value (in bytes) */
+} t_fm_port_performance_cnt;
+
+/*
+ * @Description A structure for defining the sizes of the Deep Sleep
+ * the Auto Response tables
+ */
+typedef struct t_fm_port_dsar_tables_sizes {
+ uint16_t max_num_of_arp_entries;
+ uint16_t max_num_of_echo_ipv_4entries;
+ uint16_t max_num_of_ndp_entries;
+ uint16_t max_num_of_echo_ipv_6entries;
+ uint16_t max_num_of_snmp_ipv4entries;
+ uint16_t max_num_of_snmp_ipv6entries;
+ uint16_t max_num_of_snmp_oid_entries;
+ uint16_t max_num_of_snmp_oid_char;
+ /* total amount of character needed for the snmp table */
+ uint16_t max_num_of_ip_prot_filtering;
+ uint16_t max_num_of_tcp_port_filtering;
+ uint16_t max_num_of_udp_port_filtering;
+} t_fm_port_dsar_tables_sizes;
+
+/*
+ * @Function fm_port_config_dsar_support
+ *
+ * @Description This function will allocate the amount of MURAM needed for
+ * this max number of entries for Deep Sleep Auto Response.
+ * it will calculate all needed MURAM for autoresponse including
+ * necessary common stuff.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] params A pointer to a structure containing the maximum
+ * sizes of the auto response tables
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_dsar_support(t_handle h_fm_port_rx,
+ t_fm_port_dsar_tables_sizes *params);
+
+/*
+ * @Function fm_port_config_num_of_open_dmas
+ *
+ * @Description Calling this routine changes the max number of open DMA's
+ * available for this port. It changes this parameter in the
+ * internal driver data base from its default configuration
+ * [OP: 1]
+ * [1G-RX, 1G-TX: 1 (+1)]
+ * [10G-RX, 10G-TX: 8 (+8)]
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_open_dmas A pointer to a structure of parameters defining
+ * the open DMA allocation.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_num_of_open_dmas(t_handle h_fm_port,
+ t_fm_port_rsrc *p_open_dmas);
+
+/*
+ * @Function fm_port_config_num_of_tasks
+ *
+ * @Description Calling this routine changes the max number of tasks available
+ * for this port. It changes this parameter in the internal
+ * driver data base from its default configuration
+ * [OP : 1]
+ * [1G - RX, 1G - TX : 3 ( + 2)]
+ * [10G - RX, 10G - TX : 16 ( + 8)]
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_num_of_tasks A pointer to a structure of parameters
+ * defining the tasks allocation.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_num_of_tasks(t_handle h_fm_port,
+ t_fm_port_rsrc *p_num_of_tasks);
+
+/*
+ * @Function fm_port_config_size_of_fifo
+ *
+ * @Description Calling this routine changes the max FIFO size configured for
+ * this port.
+ *
+ * This function changes the internal driver data base from its
+ * default configuration. Please refer to the driver's User Guide
+ * for information on default FIFO sizes in the various devices.
+ * [OP: 2KB]
+ * [1G-RX, 1G-TX: 11KB]
+ * [10G-RX, 10G-TX: 12KB]
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_size_of_fifo A pointer to a structure of parameters
+ * defining the FIFO allocation.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_size_of_fifo(t_handle h_fm_port,
+ t_fm_port_rsrc *p_size_of_fifo);
+
+/*
+ * @Function fm_port_config_deq_high_priority
+ *
+ * @Description Calling this routine changes the dequeue priority in the
+ * internal driver data base from its default configuration
+ * 1G: [DEFAULT_PORT_deqHighPriority_1G]
+ * 10G: [DEFAULT_PORT_deqHighPriority_10G]
+ *
+ * May be used for Non - Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] high_pri TRUE to select high priority, FALSE for normal
+ * operation.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_deq_high_priority(t_handle h_fm_port, bool high_pri);
+
+/*
+ * @Function fm_port_config_deq_type
+ *
+ * @Description Calling this routine changes the dequeue type parameter in the
+ * internal driver data base from its default configuration
+ * [DEFAULT_PORT_deq_type].
+ *
+ * May be used for Non - Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] deq_type According to QM definition.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_deq_type(t_handle h_fm_port,
+ e_fm_port_deq_type deq_type);
+
+/*
+ * @Function fm_port_config_deq_prefetch_option
+ *
+ * @Description Calling this routine changes the dequeue prefetch option
+ * parameter in the internal driver data base from its default
+ * configuration [DEFAULT_PORT_deq_prefetch_option]
+ * Note: Available for some chips only
+ *
+ * May be used for Non - Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] deq_prefetch_option New option
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_deq_prefetch_option(t_handle h_fm_port,
+ e_fm_port_deq_prefetch_option deq_prefetch_option);
+
+/*
+ * @Function fm_port_config_deq_byte_cnt
+ *
+ * @Description Calling this routine changes the dequeue byte count parameter
+ * in the internal driver data base from its default
+ * configuration.
+ * 1G:[DEFAULT_PORT_deq_byte_cnt_1G].
+ * 10G:[DEFAULT_PORT_deq_byte_cnt_10G].
+ *
+ * May be used for Non - Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] deq_byte_cnt New byte count
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_deq_byte_cnt(t_handle h_fm_port,
+ uint16_t deq_byte_cnt);
+
+/*
+ * @Function fm_port_config_buffer_prefix_content
+ *
+ * @Description Defines the structure, size and content of the application
+ * buffer. The prefix will In Tx ports, if 'pass_prs_result', the
+ * application should set a value to their offsets in the prefix
+ * of the FM will save the first 'priv_data_size', than,
+ * depending on 'pass_prs_result' and 'pass_time_stamp', copy
+ * parse result and timeStamp, and the packet itself (in this
+ * order), to the application buffer, and to offset.
+ * Calling this routine changes the buffer margins definitions in
+ * the internal driver data base from its default configuration:
+ * Data size: [DEFAULT_PORT_bufferPrefixContent_priv_data_size]
+ * Pass Parser result:
+ * [DEFAULT_PORT_bufferPrefixContent_pass_prs_result].
+ * Pass timestamp:
+ * [DEFAULT_PORT_bufferPrefixContent_pass_time_stamp].
+ *
+ * May be used for all ports
+ *
+ *
+ * @Param[in] h_fm_port A handle to a FM Port
+ * module.
+ * @Param[in,out] p_fm_buffer_prefix_content A structure of
+ * parameters describing
+ * the structure of the
+ * buffer.
+ * Out parameter: Start
+ * margin - offset of data
+ * from start of external
+ * buffer.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_buffer_prefix_content(t_handle h_fm_port,
+ t_fm_buffer_prefix_content *p_fm_buffer_prefix_content);
+
+/*
+ * @Function fm_port_config_cheksum_last_bytes_ignore
+ *
+ * @Description Calling this routine changes the number of checksum bytes to
+ * ignore parameter in the internal driver data base from its
+ * default configuration [DEFAULT_PORT_cheksum_last_bytes_ignore]
+ *
+ * May be used by Tx & Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] cheksum_last_bytes_ignore New value
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_cheksum_last_bytes_ignore(t_handle h_fm_port,
+ uint8_t cheksum_last_bytes_ignore);
+
+/*
+ * @Function fm_port_config_cut_bytes_from_end
+ *
+ * @Description Calling this routine changes the number of bytes to cut from a
+ * frame's end parameter in the internal driver data base
+ * from its default configuration
+ * [DEFAULT_PORT_cut_bytes_from_end]
+ * Note that if the result of (frame length before chop -
+ * cut_bytes_from_end) is less than 14 bytes, the chop operation
+ * is not executed.
+ *
+ * May be used for Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] cut_bytes_from_end New value
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_cut_bytes_from_end(t_handle h_fm_port,
+ uint8_t cut_bytes_from_end);
+
+/*
+ * @Function fm_port_config_ext_buf_pools
+ *
+ * @Description This routine should be called for OP ports that internally use
+ * BM buffer pools. In such cases, e.g. for fragmentation and
+ * re-assembly, the FM needs new BM buffers. By calling this
+ * routine the user specifies the BM buffer pools that should be
+ * used.
+ *
+ * Note: Available for some chips only
+ *
+ * May be used for OP ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_fm_ext_pools A structure of parameters for the
+ * external pools.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_ext_buf_pools(t_handle h_fm_port,
+ t_fm_ext_pools *p_fm_ext_pools);
+
+/*
+ * @Function fm_port_config_backup_pools
+ *
+ * @Description Calling this routine allows the configuration of some of the
+ * BM pools defined for this port as backup pools.
+ * A pool configured to be a backup pool will be used only if all
+ * other enabled non - backup pools are depleted.
+ *
+ * May be used for Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_fm_port_backup_bm_pools An array of pool id's. All pools
+ * specified here will be defined
+ * as backup pools.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_backup_pools(t_handle h_fm_port,
+ t_fm_backup_bm_pools *p_fm_port_backup_bm_pools);
+
+/*
+ * @Function fm_port_config_frm_discard_override
+ *
+ * @Description Calling this routine changes the error frames destination
+ * parameter in the internal driver data base from its default
+ * configuration: override =[DEFAULT_PORT_frmDiscardOverride]
+ *
+ * May be used for Rx and OP ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] override TRUE to override discarding of error frames and
+ * enqueueing them to error queue.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_frm_discard_override(t_handle h_fm_port,
+ bool override);
+
+/*
+ * @Function fm_port_config_errors_to_discard
+ *
+ * @Description Calling this routine changes the behaviour on error parameter
+ * in the internal driver data base from its default
+ * configuration: [DEFAULT_PORT_errorsToDiscard].
+ * If a requested error was previously defined as
+ * "ErrorsToEnqueue" it's definition will change and the frame
+ * will be discarded. Errors that were not defined either as
+ * "ErrorsToEnqueue" nor as "ErrorsToDiscard", will be forwarded
+ * to CPU.
+ *
+ * May be used for Rx and OP ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] errs A list of errors to discard
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_errors_to_discard(t_handle h_fm_port,
+ fm_port_frame_err_select_t errs);
+
+/*
+ * @Function fm_port_config_dma_swap_data
+ *
+ * @Description Calling this routine changes the DMA swap data aparameter in
+ * the internal driver data base from its default configuration:
+ * [DEFAULT_PORT_dmaSwapData]
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] swap_data New selection
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_dma_swap_data(t_handle h_fm_port,
+ e_fm_dma_swap_option swap_data);
+
+/*
+ * @Function fm_port_config_dma_ic_cache_attr
+ *
+ * @Description Calling this routine changes the internal context cache
+ * attribute parameter in the internal driver data base
+ * from its default configuration:
+ * [DEFAULT_PORT_dmaIntContextCacheAttr]
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] int_context_cache_attr New selection
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_dma_ic_cache_attr(t_handle h_fm_port,
+ e_fm_dma_cache_option int_context_cache_attr);
+
+/*
+ * @Function fm_port_config_dma_hdr_attr
+ *
+ * @Description Calling this routine changes the header cache attribute
+ * parameter in the internal driver data base from its default
+ * configuration[DEFAULT_PORT_dmaHeaderCacheAttr]
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] header_cache_attr New selection
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_dma_hdr_attr(t_handle h_fm_port,
+ e_fm_dma_cache_option header_cache_attr);
+
+/*
+ * @Function fm_port_config_dma_scatter_gather_attr
+ *
+ * @Description Calling this routine changes the scatter gather cache
+ * attribute parameter in the internal driver data base from its
+ * default configuration[DEFAULT_PORT_dmaScatterGatherCacheAttr]
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] scatter_gather_cache_attr New selection
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_dma_scatter_gather_attr(t_handle h_fm_port,
+ e_fm_dma_cache_option scatter_gather_cache_attr);
+
+/*
+ * @Function fm_port_config_dma_write_optimize
+ *
+ * @Description Calling this routine changes the write optimization parameter
+ * in the internal driver data base from its default
+ * configuration : By default optimize =
+ * [DEFAULT_PORT_dmaWriteOptimize].
+ * Note:
+ * 1. For head optimization, data alignment must be >= 16
+ * (supported by default).
+ *
+ * 2. For tail optimization, note that the optimization is
+ * performed by extending the write transaction of the frame
+ * payload at the tail as needed to achieve optimal bus
+ * transfers, so that the last write is extended to be on
+ * 16 / 64 bytes aligned block (chip dependent).
+ *
+ * Relevant for non - Tx port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] optimize TRUE to enable optimization, FALSE for normal
+ * operation
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_dma_write_optimize(t_handle h_fm_port,
+ bool optimize);
+
+/*
+ * @Function fm_port_config_no_scather_gather
+ *
+ * @Description Calling this routine changes the no_scather_gather parameter
+ * in internal driver data base from its default configuration.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] no_scather_gather TRUE - frame is discarded if can not be
+ * stored in single buffer,
+ * FALSE - frame can be stored in scatter
+ * gather (S / G) format.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_no_scather_gather(t_handle h_fm_port,
+ bool no_scather_gather);
+
+/*
+ * @Function fm_port_config_dflt_color
+ *
+ * @Description Calling this routine changes the internal default color
+ * parameter in the internal driver data base
+ * from its default configuration[DEFAULT_PORT_color]
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] color New selection
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_dflt_color(t_handle h_fm_port, e_fm_port_color color);
+
+/*
+ * @Function fm_port_config_sync_req
+ *
+ * @Description Calling this routine changes the synchronization attribute
+ * parameter in the internal driver data base from its default
+ * configuration: sync_req =[DEFAULT_PORT_sync_req]
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] sync_req TRUE to request synchronization, FALSE
+ * otherwise.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_sync_req(t_handle h_fm_port, bool sync_req);
+
+/*
+ * @Function fm_port_config_forward_reuse_int_context
+ *
+ * @Description This routine is relevant for Rx ports that are routed to OP
+ * port. It changes the internal context reuse option in the
+ * internal driver data base from its default configuration:
+ * reuse =[DEFAULT_PORT_forwardIntContextReuse]
+ *
+ * May be used for Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] reuse TRUE to reuse internal context on frames
+ * forwarded to OP port.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_forward_reuse_int_context(t_handle h_fm_port,
+ bool reuse);
+
+/*
+ * @Function fm_port_config_dont_release_tx_buf_to_bm
+ *
+ * @Description This routine should be called if no Tx confirmation
+ * is done, and yet buffers should not be released to the BM.
+ *
+ * Normally, buffers are returned using the Tx confirmation
+ * process. When Tx confirmation is not used (defFqid = 0),
+ * buffers are typically released to the BM. This routine
+ * may be called to avoid this behavior and not release the
+ * buffers.
+ *
+ * May be used for Tx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_dont_release_tx_buf_to_bm(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_config_immax_rx_buf_length
+ *
+ * @Description Changes the maximum receive buffer length from its default
+ * configuration: Closest rounded down power of 2 value of the
+ * data buffer size.
+ *
+ * The maximum receive buffer length directly affects the
+ * structure of received frames (single- or multi-buffered) and
+ * the performance of both the FM and the driver.
+ *
+ * The selection between single- or multi-buffered frames should
+ * be done according to the characteristics of the specific
+ * application. The recommended mode is to use a single data
+ * buffer per packet, as this mode provides the best performance.
+ * However, the user can select to use multiple data buffers per
+ * packet.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] new_val Maximum receive buffer length (in bytes).
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init(). This routine is to be used only if
+ * Independent-Mode is enabled.
+ */
+uint32_t fm_port_config_immax_rx_buf_length(t_handle h_fm_port,
+ uint16_t new_val);
+
+/*
+ * @Function fm_port_config_imrx_bd_ring_length
+ *
+ * @Description Changes the receive BD ring length from its default
+ * configuration:[DEFAULT_PORT_rxBdRingLength]
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] new_val The desired BD ring length.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init(). This routine is to be used only if
+ * Independent-Mode is enabled.
+ */
+uint32_t fm_port_config_imrx_bd_ring_length(t_handle h_fm_port,
+ uint16_t new_val);
+
+/*
+ * @Function fm_port_config_imtx_bd_ring_length
+ *
+ * @Description Changes the transmit BD ring length from its default
+ * configuration:[DEFAULT_PORT_txBdRingLength]
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] new_val The desired BD ring length.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init(). This routine is to be used only if
+ * Independent-Mode is enabled.
+ */
+uint32_t fm_port_config_imtx_bd_ring_length(t_handle h_fm_port,
+ uint16_t new_val);
+
+/*
+ * @Function fm_port_config_imfman_ctrl_external_structs_memory
+ *
+ * @Description Configures memory partition and attributes for FMan-Controller
+ * data structures (e.g. BD rings).
+ * Calling this routine changes the internal driver data base
+ * from its default configuration
+ * [DEFAULT_PORT_ImfwExtStructsMemId,
+ * DEFAULT_PORT_ImfwExtStructsMemAttr].
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] mem_id Memory partition ID.
+ * @Param[in] mem_attributes Memory attributes mask (a combination of
+ * MEMORY_ATTR_x flags).
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+uint32_t fm_port_config_imfman_ctrl_external_structs_memory(t_handle h_fm_port,
+ uint8_t mem_id,
+ uint32_t mem_attributes);
+
+/*
+ * @Function fm_port_config_impolling
+ *
+ * @Description Changes the Rx flow from interrupt driven (default) to
+ * polling.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ * This routine is to be used only if Independent-Mode is
+ * enabled.
+ */
+uint32_t fm_port_config_impolling(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_config_max_frame_length
+ *
+ * @Description Changes the definition of the max size of frame that should be
+ * transmitted/received on this port from its default value
+ * [DEFAULT_PORT_maxFrameLength].
+ * This parameter is used for confirmation of the minimum Fifo
+ * size calculations and only for Tx ports or ports working in
+ * independent mode. This should be larger than the maximum
+ * possible MTU that will be used for this port (i.e. its MAC).
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] length Max size of frame
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init(). This routine is to be used only if
+ * Independent-Mode is enabled.
+ */
+uint32_t fm_port_config_max_frame_length(t_handle h_fm_port,
+ uint16_t length);
+
+/*
+ * @Function fm_port_config_tx_fifo_min_fill_level
+ *
+ * @Description Calling this routine changes the fifo minimum fill level
+ * parameter in the internal driver data base from its default
+ * configuration[DEFAULT_PORT_txFifoMinFillLevel]
+ *
+ * May be used for Tx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] min_fill_level New value
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_tx_fifo_min_fill_level(t_handle h_fm_port,
+ uint32_t min_fill_level);
+
+/*
+ * @Function fm_port_config_fifo_deq_pipeline_depth
+ *
+ * @Description Calling this routine changes the fifo dequeue pipeline depth
+ * parameter in the internal driver data base
+ *
+ * from its default configuration :
+ * 1G ports : [DEFAULT_PORT_fifoDeqPipelineDepth_1G],
+ * 10G port : [DEFAULT_PORT_fifoDeqPipelineDepth_10G],
+ * OP port : [DEFAULT_PORT_fifoDeqPipelineDepth_OH]
+ *
+ * May be used for Tx / OP ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] deq_pipeline_depth New value
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_fifo_deq_pipeline_depth(t_handle h_fm_port,
+ uint8_t deq_pipeline_depth);
+
+/*
+ * @Function fm_port_config_tx_fifo_low_comf_level
+ *
+ * @Description Calling this routine changes the fifo low comfort level
+ * parameter in internal driver data base from its default
+ * configuration[DEFAULT_PORT_txFifoLowComfLevel]
+ *
+ * May be used for Tx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] fifo_low_comf_level New value
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_tx_fifo_low_comf_level(t_handle h_fm_port,
+ uint32_t fifo_low_comf_level);
+
+/*
+ * @Function fm_port_config_rx_fifo_threshold
+ *
+ * @Description Calling this routine changes the threshold of the FIFO fill
+ * level parameter in the internal driver data base from its
+ * default configuration[DEFAULT_PORT_rxFifoThreshold]
+ *
+ * If the total number of buffers which are currently in use and
+ * associated with the specific RX port exceed this threshold,
+ * the BMI will signal the MAC to send a pause frame over the
+ * link.
+ *
+ * May be used for Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] fifo_threshold New value
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_rx_fifo_threshold(t_handle h_fm_port,
+ uint32_t fifo_threshold);
+
+/*
+ * @Function fm_port_config_rx_fifo_pri_elevation_level
+ *
+ * @Description Calling this routine changes the priority elevation level
+ * parameter in the internal driver data base from its default
+ * configuration[DEFAULT_PORT_rxFifoPriElevationLevel]
+ *
+ * If the total number of buffers which are currently in use and
+ * associated with the specific RX port exceed the amount
+ * specified in pri_elevation_level, BMI will signal the main
+ * FM's DMA to elevate the FM priority on the system bus.
+ *
+ * May be used for Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] pri_elevation_level New value
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_rx_fifo_pri_elevation_level(t_handle h_fm_port,
+ uint32_t pri_elevation_level);
+
+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
+/*
+ * @Function fm_port_config_bcbworkaround
+ *
+ * @Description Configures BCB errata workaround.
+ *
+ * When BCB errata is applicable, the workaround is always
+ * performed by FM Controller. Thus, this functions doesn't
+ * actually enable errata workaround but rather allows driver to
+ * perform adjustments required due to errata workaround
+ * execution in FM controller.
+ *
+ * Applying BCB workaround also configures
+ * FM_PORT_FRM_ERR_PHYSICAL errors to be discarded. Thus
+ * FM_PORT_FRM_ERR_PHYSICAL can't be set by
+ * fm_port_set_errors_route() function.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_bcbworkaround(t_handle h_fm_port);
+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
+
+#if (DPAA_VERSION >= 11)
+/*
+ * @Function fm_port_config_internal_buff_offset
+ *
+ * @Description Configures internal buffer offset.
+ *
+ * May be used for Rx and OP ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] val New value
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_config_internal_buff_offset(t_handle h_fm_port, uint8_t val);
+#endif /* (DPAA_VERSION >= 11) */
+
+/** @} */ /* end of FM_PORT_advanced_init_grp group */
+/** @} */ /* end of FM_PORT_init_grp group */
+
+/*
+ * @Group FM_PORT_runtime_control_grp FM Port Runtime Control Unit
+ *
+ * @Description FM Port Runtime control unit API functions, definitions and
+ * enums.
+ *
+ * @{
+ */
+
+/*
+ * @Description enum for defining FM Port counters
+ */
+typedef enum e_fm_port_counters {
+ e_FM_PORT_COUNTERS_CYCLE, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_TASK_UTIL, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_QUEUE_UTIL, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_DMA_UTIL, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_FIFO_UTIL, /**< BMI performance counter */
+ e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION,
+ /**< BMI Rx only performance counter */
+ e_FM_PORT_COUNTERS_FRAME, /**< BMI statistics counter */
+ e_FM_PORT_COUNTERS_DISCARD_FRAME, /**< BMI statistics counter */
+ e_FM_PORT_COUNTERS_DEALLOC_BUF,
+ /**< BMI deallocate buffer statistics counter */
+ e_FM_PORT_COUNTERS_RX_BAD_FRAME,
+ /**< BMI Rx only statistics counter */
+ e_FM_PORT_COUNTERS_RX_LARGE_FRAME,
+ /**< BMI Rx only statistics counter */
+ e_FM_PORT_COUNTERS_RX_FILTER_FRAME,
+ /**< BMI Rx & OP only statistics counter */
+ e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR,
+ /**< BMI Rx, OP & HC only statistics counter */
+ e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD,
+ /**< BMI Rx, OP & HC statistics counter */
+ e_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER,
+ /**< BMI Rx, OP & HC only statistics counter */
+ e_FM_PORT_COUNTERS_WRED_DISCARD,
+ /**< BMI OP & HC only statistics counter */
+ e_FM_PORT_COUNTERS_LENGTH_ERR,
+ /**< BMI non-Rx statistics counter */
+ e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT,
+ /**< BMI non-Rx statistics counter */
+ e_FM_PORT_COUNTERS_DEQ_TOTAL, /**< QMI total QM dequeues counter */
+ e_FM_PORT_COUNTERS_ENQ_TOTAL, /**< QMI total QM enqueues counter */
+ e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT, /**< QMI counter */
+ e_FM_PORT_COUNTERS_DEQ_CONFIRM /**< QMI counter */
+} e_fm_port_counters;
+
+typedef struct t_fm_port_bmi_stats {
+ uint32_t cnt_cycle;
+ uint32_t cnt_task_util;
+ uint32_t cnt_queue_util;
+ uint32_t cnt_dma_util;
+ uint32_t cnt_fifo_util;
+ uint32_t cnt_rx_pause_activation;
+ uint32_t cnt_frame;
+ uint32_t cnt_discard_frame;
+ uint32_t cnt_dealloc_buf;
+ uint32_t cnt_rx_bad_frame;
+ uint32_t cnt_rx_large_frame;
+ uint32_t cnt_rx_filter_frame;
+ uint32_t cnt_rx_list_dma_err;
+ uint32_t cnt_rx_out_of_buffers_discard;
+ uint32_t cnt_wred_discard;
+ uint32_t cnt_length_err;
+ uint32_t cnt_unsupported_format;
+} t_fm_port_bmi_stats;
+
+/*
+ * @Description Structure for Port id parameters.
+ * Fields commented 'IN' are passed by the port module to be used
+ * by the FM module.
+ * Fields commented 'OUT' will be filled by FM before returning
+ * to port.
+ */
+typedef struct t_fm_port_congestion_grps {
+ uint16_t num_of_congestion_grps_to_consider;
+ /**< The number of required CGs to define the size of
+ * the following array
+ */
+ uint8_t congestion_grps_to_consider[FM_NUM_CONG_GRPS];
+ /**< An array of CG indexes; Note that the size of the
+ * array should be 'num_of_congestion_grps_to_consider'.
+ */
+#if (DPAA_VERSION >= 11)
+ bool pfcPrioritiesEn[FM_NUM_CONG_GRPS][FM_MAX_PFC_PRIO];
+ /**< a matrix that represents the map between the CG ids
+ * defined in 'congestion_grps_to_consider' to the
+ * priorties mapping array.
+ */
+#endif /* (DPAA_VERSION >= 11) */
+} t_fm_port_congestion_grps;
+
+/*
+ * @Description Structure for Deep Sleep Auto Response ARP Entry
+ */
+typedef struct t_fm_port_dsar_arp_entry {
+ uint32_t ip_address;
+ uint8_t mac[6];
+ bool is_vlan;
+ uint16_t vid;
+} t_fm_port_dsar_arp_entry;
+
+/*
+ * @Description Structure for Deep Sleep Auto Response ARP info
+ */
+typedef struct t_fm_port_dsar_arp_info {
+ uint8_t table_size;
+ t_fm_port_dsar_arp_entry *p_auto_res_table;
+ bool enable_conflict_detection;
+ /* when TRUE Conflict Detection will be checked and wake the
+ * host if needed
+ */
+} t_fm_port_dsar_arp_info;
+
+/*
+ * @Description Structure for Deep Sleep Auto Response NDP Entry
+ */
+typedef struct t_fm_port_dsar_ndp_entry {
+ uint32_t ip_address[4];
+ uint8_t mac[6];
+ bool is_vlan;
+ uint16_t vid;
+} t_fm_port_dsar_ndp_entry;
+
+/*
+ * @Description Structure for Deep Sleep Auto Response NDP info
+ */
+typedef struct t_fm_port_dsar_ndp_info {
+ uint32_t multicast_group;
+
+ uint8_t table_size_assigned;
+ t_fm_port_dsar_ndp_entry *p_auto_res_table_assigned;
+ /* This list refer to solicitation IP addresses.
+ * Note that all IP addresses must be from the same multicast
+ * group. This will be checked and if not operation will fail.
+ */
+ uint8_t table_size_tmp;
+ t_fm_port_dsar_ndp_entry *p_auto_res_table_tmp;
+ /* This list refer to temp IP addresses.
+ * Note that all temp IP addresses must be from the same
+ * multicast group. This will be checked and if not operation
+ * will fail.
+ */
+
+ bool enable_conflict_detection;
+ /* when TRUE Conflict Detection will be checked and wake the
+ * host if needed
+ */
+
+} t_fm_port_dsar_ndp_info;
+
+/*
+ * @Description Structure for Deep Sleep Auto Response ICMPV4 info
+ */
+typedef struct t_fm_port_dsar_echo_ipv4info {
+ uint8_t table_size;
+ t_fm_port_dsar_arp_entry *p_auto_res_table;
+} t_fm_port_dsar_echo_ipv4info;
+
+/*
+ * @Description Structure for Deep Sleep Auto Response ICMPV6 info
+ */
+typedef struct t_fm_port_dsar_echo_ipv6info {
+ uint8_t table_size;
+ t_fm_port_dsar_ndp_entry *p_auto_res_table;
+} t_fm_port_dsar_echo_ipv6info;
+
+/*
+ * @Description Deep Sleep Auto Response SNMP OIDs table entry
+ */
+typedef struct {
+ uint16_t oid_size;
+ uint8_t *oid_val; /* only the oid string */
+ uint16_t res_size;
+ uint8_t *res_val; /* res_val will be the entire reply,
+ * i.e. "Type|Length|Value"
+ */
+} t_fm_port_dsar_oids_entry;
+
+/*
+ * @Description Deep Sleep Auto Response SNMP IPv4 Addresses Table Entry
+ * Refer to the FMan Controller spec for more details.
+ */
+typedef struct {
+ uint32_t ipv_4addr; /*!< 32 bit IPv4 Address. */
+ bool is_vlan;
+ uint16_t vid; /*!< 12 bits VLAN ID. The 4 left-most bits should be
+ * cleared
+ */
+ /*!< This field should be 0x0000 for an entry with no VLAN tag or a null
+ * VLAN ID.
+ */
+} t_fm_port_dsar_snmp_ipv4addr_tbl_entry;
+
+/*
+ * @Description Deep Sleep Auto Response SNMP IPv6 Addresses Table Entry
+ * Refer to the FMan Controller spec for more details.
+ */
+typedef struct {
+ uint32_t ipv_6addr[4]; /*!< 4 * 32 bit IPv6 Address.*/
+ bool is_vlan;
+ uint16_t vid; /*!< 12 bits VLAN ID. The 4 left-most bits should be
+ * cleared
+ */
+ /*!< This field should be 0x0000 for an entry with no VLAN tag or a null
+ * VLAN ID.
+ */
+} t_fm_port_dsar_snmp_ipv6addr_tbl_entry;
+
+/*
+ * @Description Deep Sleep Auto Response SNMP Descriptor
+ */
+typedef struct {
+ uint16_t control; /**< Control bits [0-15]. */
+ uint16_t max_snmp_msg_length;
+ /**< Maximal allowed SNMP message length. */
+ uint16_t num_of_ipv_4addresses;
+ /**< Number of entries in IPv4 addresses table. */
+ uint16_t num_of_ipv_6addresses;
+ /**< Number of entries in IPv6 addresses table. */
+ t_fm_port_dsar_snmp_ipv4addr_tbl_entry *p_ipv_4addr_tbl;
+ /**< Pointer to IPv4 addresses table. */
+ t_fm_port_dsar_snmp_ipv6addr_tbl_entry *p_ipv_6addr_tbl;
+ /**< Pointer to IPv6 addresses table. */
+ uint8_t *p_rd_only_community_str;
+ /**< Pointer to the Read Only Community String. */
+ uint8_t *p_rd_wr_community_str;
+ /**< Pointer to the Read Write Community String. */
+ t_fm_port_dsar_oids_entry *p_oids_tbl;/**< Pointer to OIDs table. */
+ uint32_t oids_tbl_size; /**< Number of entries in OIDs table. */
+} t_fm_port_dsar_snmp_info;
+
+/*
+ * @Description Structure for Deep Sleep Auto Response filtering Entry
+ */
+typedef struct t_fm_port_dsar_filtering_entry {
+ uint16_t src_port;
+ uint16_t dst_port;
+ uint16_t src_port_mask;
+ uint16_t dst_port_mask;
+} t_fm_port_dsar_filtering_entry;
+
+/*
+ * @Description Structure for Deep Sleep Auto Response filtering info
+ */
+typedef struct t_fm_port_dsar_filtering_info {
+ /* IP protocol filtering parameters */
+ uint8_t ip_prot_table_size;
+ uint8_t *p_ip_prot_table_ptr;
+ bool ip_prot_pass_on_hit;
+ /* when TRUE, miss in the table will cause the packet to
+ * be dropped, hit will pass the packet to UDP/TCP
+ * filters if needed and if not to the classification
+ * tree. If the classification tree will pass the packet
+ * to a queue it will cause a wake interrupt. When FALSE
+ * it the other way around.
+ */
+ /* UDP port filtering parameters */
+ uint8_t udp_ports_table_size;
+ t_fm_port_dsar_filtering_entry *p_udp_ports_table_ptr;
+ bool udp_port_pass_on_hit;
+ /* when TRUE, miss in the table will cause the packet to
+ * be dropped, hit will pass the packet to classification
+ * tree. If the classification tree will pass the packet
+ * to a queue it will cause a wake interrupt.
+ * When FALSE it the other way around.
+ */
+ /* TCP port filtering parameters */
+ uint16_t tcp_flags_mask;
+ uint8_t tcp_ports_table_size;
+ t_fm_port_dsar_filtering_entry *p_tcp_ports_table_ptr;
+ bool tcp_port_pass_on_hit;
+ /* when TRUE, miss in the table will cause the packet to
+ * be dropped, hit will pass the packet to classification
+ * tree. If the classification tree will pass the packet
+ * to a queue it will cause a wake interrupt.
+ * When FALSE it the other way around.
+ */
+} t_fm_port_dsar_filtering_info;
+
+/*
+ * @Description Structure for Deep Sleep Auto Response parameters
+ */
+typedef struct t_fm_port_dsar_params {
+ t_handle h_fm_port_tx;
+ t_fm_port_dsar_arp_info *p_auto_res_arp_info;
+ t_fm_port_dsar_echo_ipv4info *p_auto_res_echo_ipv_4info;
+ t_fm_port_dsar_ndp_info *p_auto_res_ndp_info;
+ t_fm_port_dsar_echo_ipv6info *p_auto_res_echo_ipv_6info;
+ t_fm_port_dsar_snmp_info *p_auto_res_snmp_info;
+ t_fm_port_dsar_filtering_info *p_auto_res_filtering_info;
+} t_fm_port_dsar_params;
+
+/*
+ * @Function fm_port_enter_dsar
+ *
+ * @Description Enter Deep Sleep Auto Response mode.
+ * This function write the appropriate values to in the relevant
+ * tables in the MURAM.
+ *
+ * @Param[in] h_fm_port_rx FM PORT module descriptor
+ * @Param[in] params Auto Response parameters
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_enter_dsar(t_handle h_fm_port_rx,
+ t_fm_port_dsar_params *params);
+
+/*
+ * @Function fm_port_enter_dsar_final
+ *
+ * @Description Enter Deep Sleep Auto Response mode.
+ * This function sets the Tx port in independent mode as needed
+ * and redirect the receive flow to go through the Dsar Fman-ctrl
+ * code
+ *
+ * @Param[in] h_dsar_rx_port FM Rx PORT module descriptor
+ * @Param[in] h_dsar_tx_port FM Tx PORT module descriptor
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_enter_dsar_final(t_handle h_dsar_rx_port,
+ t_handle h_dsar_tx_port);
+
+/*
+ * @Function fm_port_exit_dsar
+ *
+ * @Description Exit Deep Sleep Auto Response mode.
+ * This function reverse the AR mode and put the ports back into
+ * their original wake mode
+ *
+ * @Param[in] h_fm_port_rx FM PORT Rx module descriptor
+ * @Param[in] h_fm_port_tx FM PORT Tx module descriptor
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_enter_dsar().
+ */
+void fm_port_exit_dsar(t_handle h_fm_port_rx, t_handle h_fm_port_tx);
+
+/*
+ * @Function fm_port_is_in_dsar
+ *
+ * @Description This function returns TRUE if the port was set as Auto
+ * Response and FALSE if not. Once Exit AR mode it will return
+ * FALSE as well until re-enabled once more.
+ *
+ * @Param[in] h_fm_port FM PORT module descriptor
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+bool fm_port_is_in_dsar(t_handle h_fm_port);
+
+typedef struct t_fm_port_dsar_stats {
+ uint32_t arp_ar_cnt;
+ uint32_t echo_icmpv_4ar_cnt;
+ uint32_t ndp_ar_cnt;
+ uint32_t echo_icmpv_6ar_cnt;
+ uint32_t snmp_get_cnt;
+ uint32_t snmp_get_next_cnt;
+} t_fm_port_dsar_stats;
+
+/*
+ * @Function fm_port_get_dsar_stats
+ *
+ * @Description Return statistics for Deep Sleep Auto Response
+ *
+ * @Param[in] h_fm_port_rx FM PORT module descriptor
+ * @Param[out] stats structure containing the statistics counters
+ *
+ * @Return E_OK on success; Error code otherwise.
+ */
+uint32_t fm_port_get_dsar_stats(t_handle h_fm_port_rx,
+ t_fm_port_dsar_stats *stats);
+
+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
+/*
+ * @Function fm_port_dump_regs
+ *
+ * @Description Dump all regs.
+ *
+ * Calling this routine invalidates the descriptor.
+ *
+ * @Param[in] h_fm_port FM PORT module descriptor
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_dump_regs(t_handle h_fm_port);
+#endif /* (defined(DEBUG_ERRORS) && ... */
+
+/*
+ * @Function fm_port_get_buffer_data_offset
+ *
+ * @Description Relevant for Rx ports. Returns the data offset from the
+ * beginning of the data buffer
+ *
+ * @Param[in] h_fm_port FM PORT module descriptor
+ *
+ * @Return data offset.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_get_buffer_data_offset(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_get_buffer_icinfo
+ *
+ * @Description Returns the Internal Context offset from the beginning of the
+ * data buffer
+ *
+ * @Param[in] h_fm_port FM PORT module descriptor
+ * @Param[in] p_data A pointer to the data buffer.
+ *
+ * @Return Internal context info pointer on success, NULL if
+ * 'allOtherInfo' was not configured for this port.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint8_t *fm_port_get_buffer_icinfo(t_handle h_fm_port, char *p_data);
+
+/*
+ * @Function fm_port_get_buffer_prs_result
+ *
+ * @Description Returns the pointer to the parse result in the data buffer.
+ * In Rx ports this is relevant after reception, if parse result
+ * is configured to be part of the data passed to the
+ * application. For non Rx ports it may be used to get the
+ * pointer of the area in the buffer where parse result should be
+ * initialized - if so configured.
+ * See fm_port_config_buffer_prefix_content for data buffer
+ * prefix configuration.
+ *
+ * @Param[in] h_fm_port FM PORT module descriptor
+ * @Param[in] p_data A pointer to the data buffer.
+ *
+ * @Return Parse result pointer on success, NULL if parse result was not
+ * configured for this port.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+t_fm_prs_result *fm_port_get_buffer_prs_result(t_handle h_fm_port,
+ char *p_data);
+
+/*
+ * @Function fm_port_get_buffer_time_stamp
+ *
+ * @Description Returns the time stamp in the data buffer.
+ * Relevant for Rx ports for getting the buffer time stamp.
+ * See fm_port_config_buffer_prefix_content for data buffer
+ * prefix configuration.
+ *
+ * @Param[in] h_fm_port FM PORT module descriptor
+ * @Param[in] p_data A pointer to the data buffer.
+ *
+ * @Return A pointer to the hash result on success, NULL otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint64_t *fm_port_get_buffer_time_stamp(t_handle h_fm_port, char *p_data);
+
+/*
+ * @Function fm_port_get_buffer_hash_result
+ *
+ * @Description Given a data buffer, on the condition that hash result was
+ * defined as a part of the buffer content(see
+ * fm_port_config_buffer_prefix_content) this routine will return
+ * the pointer to the hash result location in the buffer prefix.
+ *
+ * @Param[in] h_fm_port FM PORT module descriptor
+ * @Param[in] p_data A pointer to the data buffer.
+ *
+ * @Return A pointer to the hash result on success, NULL otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint8_t *fm_port_get_buffer_hash_result(t_handle h_fm_port, char *p_data);
+
+/*
+ * @Function fm_port_disable
+ *
+ * @Description Gracefully disable an FM port. The port will not start new
+ * tasks after all tasks associated with the port are terminated.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ * This is a blocking routine, it returns after port is
+ * gracefully stopped, i.e. the port will not except new frames,
+ * but it will finish all frames or tasks which were already
+ * began
+ */
+uint32_t fm_port_disable(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_enable
+ *
+ * @Description A runtime routine provided to allow disable/enable of port.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_enable(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_set_rate_limit
+ *
+ * @Description Calling this routine enables rate limit algorithm.
+ * By default, this functionality is disabled.
+ *
+ * Note that rate - limit mechanism uses the FM time stamp.
+ * The selected rate limit specified here would be
+ * rounded DOWN to the nearest 16M.
+ *
+ * May be used for Tx and OP ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_rate_limit A structure of rate limit parameters
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init(). If rate limit is set
+ * on a port that need to send PFC frames, it might violate the
+ * stop transmit timing.
+ */
+uint32_t fm_port_set_rate_limit(t_handle h_fm_port,
+ t_fm_port_rate_limit *p_rate_limit);
+
+/*
+ * @Function fm_port_delete_rate_limit
+ *
+ * @Description Calling this routine disables and clears rate limit
+ * initialization.
+ *
+ * May be used for Tx and OP ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_delete_rate_limit(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_set_pfc_priorities_mapping_to_qman_wq
+
+ * @Description Calling this routine maps each PFC received priority to the
+ * transmit WQ. This WQ will be blocked upon receiving a PFC
+ * frame with this priority.
+ *
+ * May be used for Tx ports only.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] prio PFC priority (0 - 7).
+ * @Param[in] wq Work Queue (0 - 7).
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_pfc_priorities_mapping_to_qman_wq(t_handle h_fm_port,
+ uint8_t prio, uint8_t wq);
+
+/*
+ * @Function fm_port_set_statistics_counters
+ *
+ * @Description Calling this routine enables/disables port's statistics
+ * counters. By default, counters are enabled.
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] enable TRUE to enable, FALSE to disable.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_statistics_counters(t_handle h_fm_port, bool enable);
+
+/*
+ * @Function fm_port_set_frame_queue_counters
+ *
+ * @Description Calling this routine enables/disables port's enqueue/dequeue
+ * counters. By default, counters are enabled.
+ *
+ * May be used for all ports
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] enable TRUE to enable, FALSE to disable.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_frame_queue_counters(t_handle h_fm_port,
+ bool enable);
+
+/*
+ * @Function fm_port_analyze_performance_params
+ *
+ * @Description User may call this routine to so the driver will analyze if
+ * the basic performance parameters are correct and also the
+ * driver may suggest of improvements; The basic parameters are
+ * FIFO sizes, number of DMAs and number of TNUMs for the port.
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_analyze_performance_params(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_set_alloc_buf_counter
+ *
+ * @Description Calling this routine enables/disables BM pool allocate
+ * buffer counters.
+ * By default, counters are enabled.
+ *
+ * May be used for Rx ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] pool_id BM pool id.
+ * @Param[in] enable TRUE to enable, FALSE to disable.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_alloc_buf_counter(t_handle h_fm_port,
+ uint8_t pool_id, bool enable);
+
+/*
+ * @Function fm_port_get_bmi_counters
+ *
+ * @Description Read port's BMI stat counters and place them into
+ * a designated structure of counters.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[out] p_bmi_stats counters structure
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_get_bmi_counters(t_handle h_fm_port,
+ t_fm_port_bmi_stats *p_bmi_stats);
+
+/*
+ * @Function fm_port_get_counter
+ *
+ * @Description Reads one of the FM PORT counters.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] fm_port_counter The requested counter.
+ *
+ * @Return Counter's current value.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ * Note that it is user's responsibility to call this routine
+ * only for enabled counters, and there will be no indication if
+ * a disabled counter is accessed.
+ */
+uint32_t fm_port_get_counter(t_handle h_fm_port,
+ e_fm_port_counters fm_port_counter);
+
+/*
+ * @Function fm_port_modify_counter
+ *
+ * @Description Sets a value to an enabled counter. Use "0" to reset the
+ * counter.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] fm_port_counter The requested counter.
+ * @Param[in] value The requested value to be written into
+ * the counter.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_modify_counter(t_handle h_fm_port,
+ e_fm_port_counters fm_port_counter, uint32_t value);
+
+/*
+ * @Function fm_port_get_alloc_buf_counter
+ *
+ * @Description Reads one of the FM PORT buffer counters.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] pool_id The requested pool.
+ *
+ * @Return Counter's current value.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ * Note that it is user's responsibility to call this routine
+ * only for enabled counters, and there will be no indication if
+ * a disabled counter is accessed.
+ */
+uint32_t fm_port_get_alloc_buf_counter(t_handle h_fm_port,
+ uint8_t pool_id);
+
+/*
+ * @Function fm_port_modify_alloc_buf_counter
+ *
+ * @Description Sets a value to an enabled counter. Use "0" to reset the
+ * counter.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] pool_id The requested pool.
+ * @Param[in] value The requested value to be written into the
+ * counter.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_modify_alloc_buf_counter(t_handle h_fm_port,
+ uint8_t pool_id, uint32_t value);
+
+/*
+ * @Function fm_port_add_congestion_grps
+ *
+ * @Description This routine effects the corresponding Tx port.
+ * It should be called in order to enable pause
+ * frame transmission in case of congestion in one or more
+ * of the congestion groups relevant to this port.
+ * Each call to this routine may add one or more congestion
+ * groups to be considered relevant to this port.
+ *
+ * May be used for Rx, or RX + OP ports only (depending on chip)
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_congestion_grps A pointer to an array of congestion
+ * groups id's to consider.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_add_congestion_grps(t_handle h_fm_port,
+ t_fm_port_congestion_grps *p_congestion_grps);
+
+/*
+ * @Function fm_port_remove_congestion_grps
+ *
+ * @Description This routine effects the corresponding Tx port. It should be
+ * called when congestion groups were defined for this port and
+ * are no longer relevant, or pause frames transmitting is not
+ * required on their behalf.
+ * Each call to this routine may remove one or more congestion
+ * groups to be considered relevant to this port.
+ *
+ * May be used for Rx, or RX + OP ports only (depending on chip)
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_congestion_grps A pointer to an array of congestion
+ * groups id's to consider.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_remove_congestion_grps(t_handle h_fm_port,
+ t_fm_port_congestion_grps *p_congestion_grps);
+
+/*
+ * @Function fm_port_is_stalled
+ *
+ * @Description A routine for checking whether the specified port is stalled.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return TRUE if port is stalled, FALSE otherwize
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+bool fm_port_is_stalled(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_release_stalled
+ *
+ * @Description This routine may be called in case the port was stalled and
+ * may now be released.
+ * Note that this routine is available only on older FMan
+ * revisions (FMan v2, DPAA v1.0 only).
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_release_stalled(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_set_rx_l4checksum_verify
+ *
+ * @Description This routine is relevant for Rx ports (1G and 10G). The
+ * routine set / clear the L3 / L4 checksum verification (on RX
+ * side). Note that this takes affect only if hw - parser is
+ * enabled !
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] l_4checksum boolean indicates whether to do L3/L4 checksum
+ * on frames or not.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_rx_l4checksum_verify(t_handle h_fm_port,
+ bool l_4checksum);
+
+/*
+ * @Function fm_port_set_errors_route
+ *
+ * @Description Errors selected for this routine will cause a frame with that
+ * error to be enqueued to error queue.
+ * Errors not selected for this routine will cause a frame with
+ * that error to be enqueued to the one of the other port queues.
+ * By default all errors are defined to be enqueued to error
+ * queue. Errors that were configured to be discarded(at
+ * initialization) may not be selected here.
+ *
+ * May be used for Rx and OP ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] errs A list of errors to enqueue to error queue
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+uint32_t fm_port_set_errors_route(t_handle h_fm_port,
+ fm_port_frame_err_select_t errs);
+
+/*
+ * @Function fm_port_set_imexceptions
+ *
+ * @Description Calling this routine enables/disables FM PORT interrupts.
+ *
+ * @Param[in] h_fm_port FM PORT module descriptor.
+ * @Param[in] exception The exception to be selected.
+ * @Param[in] enable TRUE to enable interrupt, FALSE to mask it.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ * This routine should NOT be called from guest-partition
+ * (i.e. guestId != NCSW_MASTER_ID)
+ */
+uint32_t fm_port_set_imexceptions(t_handle h_fm_port,
+ e_fm_port_exceptions exception, bool enable);
+
+/*
+ * @Function fm_port_set_performance_counters
+ *
+ * @Description Calling this routine enables/disables port's performance
+ * counters. By default, counters are enabled.
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] enable TRUE to enable, FALSE to disable.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_performance_counters(t_handle h_fm_port,
+ bool enable);
+
+/*
+ * @Function fm_port_set_performance_counters_params
+ *
+ * @Description Calling this routine defines port's performance counters
+ * parameters.
+ *
+ * May be used for all port types
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_fm_port_performance_cnt A pointer to a structure of
+ * performance counters parameters.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_performance_counters_params(t_handle h_fm_port,
+ t_fm_port_performance_cnt *p_fm_port_performance_cnt);
+
+/*
+ * @Group FM_PORT_pcd_runtime_control_grp
+ * FM Port PCD Runtime Control Unit
+ *
+ * @Description FM Port PCD Runtime control unit API functions, definitions
+ * and enums.
+ *
+ * @Function fm_port_set_pcd
+ *
+ * @Description Calling this routine defines the port's PCD configuration. It
+ * changes it from its default configuration which is PCD
+ * disabled (BMI to BMI) and configures it according to the
+ * passed parameters.
+ *
+ * May be used for Rx and OP ports only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_fm_port_pcd A Structure of parameters defining the port's
+ * PCD configuration.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_pcd(t_handle h_fm_port,
+ ioc_fm_port_pcd_params_t *p_fm_port_pcd);
+
+/*
+ * @Function fm_port_delete_pcd
+ *
+ * @Description Calling this routine releases the port's PCD configuration.
+ * The port returns to its default configuration which is PCD
+ * disabled (BMI to BMI) and all PCD configuration is removed.
+ *
+ * May be used for Rx and OP ports which are in PCD mode only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_delete_pcd(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_attach_pcd
+ *
+ * @Description This routine may be called after fm_port_detach_pcd was
+ * called, to return to the originally configured PCD support
+ * flow. The couple of routines are used to allow PCD
+ * configuration changes that demand that PCD will not be used
+ * while changes take place.
+ *
+ * May be used for Rx and OP ports which are in PCD mode only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ */
+uint32_t fm_port_attach_pcd(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_detach_pcd
+ *
+ * @Description Calling this routine detaches the port from its PCD
+ * functionality. The port returns to its default flow which is
+ * BMI to BMI.
+ *
+ * May be used for Rx and OP ports which are in PCD mode only
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_attach_pcd().
+ */
+uint32_t fm_port_detach_pcd(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_pcd_plcr_alloc_profiles
+ *
+ * @Description This routine may be called only for ports that use the Policer
+ * in order to allocate private policer profiles.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] num_of_profiles The number of required policer profiles
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init() and fm_pcd_init(), and
+ * before fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_plcr_alloc_profiles(t_handle h_fm_port,
+ uint16_t num_of_profiles);
+
+/*
+ * @Function fm_port_pcd_plcr_free_profiles
+ *
+ * @Description This routine should be called for freeing private policer
+ * profiles.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init() and fm_pcd_init(), and
+ * before fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_plcr_free_profiles(t_handle h_fm_port);
+
+/*
+ * @Function fm_port_pcd_kg_modify_initial_scheme
+ *
+ * @Description This routine may be called only for ports that use the keygen
+ * in order to change the initial scheme frame should be routed
+ * to. The change may be of a scheme id(in case of direct mode),
+ * from direct to indirect, or from indirect to direct -
+ * specifying the scheme id.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_fm_pcd_kg_scheme A structure of parameters for defining
+ * whether a scheme is direct / indirect,
+ * and if direct - scheme id.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init() and fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_kg_modify_initial_scheme(t_handle h_fm_port,
+ ioc_fm_pcd_kg_scheme_select_t *p_fm_pcd_kg_scheme);
+
+/*
+ * @Function fm_port_pcd_plcr_modify_initial_profile
+ *
+ * @Description This routine may be called for ports with flows
+ * e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or
+ * e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR only, to change the initial
+ * Policer profile frame should be routed to. The change may be
+ * of a profile and / or absolute / direct mode selection.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] h_profile Policer profile handle
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init() and fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_plcr_modify_initial_profile(t_handle h_fm_port,
+ t_handle h_profile);
+
+/*
+ * @Function fm_port_pcd_cc_modify_tree
+ *
+ * @Description This routine may be called for ports that use coarse
+ * classification tree if the user wishes to replace the tree.
+ * The routine may not be called while port receives packets
+ * using the PCD functionalities, therefor port must be first
+ * detached from the PCD, only than the routine may be called,
+ * and than port be attached to PCD again.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] h_cc_tree A CC tree that was already built. The tree id as
+ * returned from the BuildTree routine.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init(), fm_port_set_pcd() and
+ * fm_port_detach_pcd()
+ */
+uint32_t fm_port_pcd_cc_modify_tree(t_handle h_fm_port, t_handle h_cc_tree);
+
+/*
+ * @Function fm_port_pcd_kg_bind_schemes
+ *
+ * @Description These routines may be called for adding more schemes for the
+ * port to be bound to. The selected schemes are not added, just
+ * this specific port starts using them.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_port_scheme A structure defining the list of schemes
+ * to be added.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init() and fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_kg_bind_schemes(t_handle h_fm_port,
+ ioc_fm_pcd_port_schemes_params_t *p_port_scheme);
+
+/*
+ * @Function fm_port_pcd_kg_unbind_schemes
+ *
+ * @Description These routines may be called for adding more schemes for the
+ * port to be bound to. The selected schemes are not removed or
+ * invalidated, just this specific port stops using them.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_port_scheme A structure defining the list of schemes
+ * to be added.
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init() and fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_kg_unbind_schemes(t_handle h_fm_port,
+ ioc_fm_pcd_port_schemes_params_t *p_port_scheme);
+
+/*
+ * @Function fm_port_get_ipv_4options_count
+ *
+ * @Description TODO
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[out] p_ipv_4options_count will hold the counter value
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init()
+ */
+uint32_t fm_port_get_ipv_4options_count(t_handle h_fm_port,
+ uint32_t *p_ipv_4options_count);
+
+/** @} */ /* end of FM_PORT_pcd_runtime_control_grp group */
+/** @} */ /* end of FM_PORT_runtime_control_grp group */
+
+/*
+ * @Group FM_PORT_runtime_data_grp FM Port Runtime Data-path Unit
+ *
+ * @Description FM Port Runtime data unit API functions, definitions and
+ * enums. This API is valid only if working in Independent-Mode.
+ *
+ * @{
+ */
+
+/*
+ * @Function fm_port_im_tx
+ *
+ * @Description Tx function, called to transmit a data buffer on the port.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ * @Param[in] p_data A pointer to an LCP data buffer.
+ * @Param[in] length Size of data for transmission.
+ * @Param[in] last_buffer Buffer position - TRUE for the last buffer of a
+ * frame, including a single buffer frame
+ * @Param[in] h_buf_context A handle of the user acossiated with this buffer
+ *
+ * @Return E_OK on success; Error code otherwise.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ * NOTE - This routine can be used only when working in
+ * Independent-Mode mode.
+ */
+uint32_t fm_port_im_tx(t_handle h_fm_port,
+ uint8_t *p_data,
+ uint16_t length,
+ bool last_buffer,
+ t_handle h_buf_context);
+
+/*
+ * @Function fm_port_im_tx_conf
+ *
+ * @Description Tx port confirmation routine, optional, may be called to
+ * verify transmission of all frames. The procedure performed by
+ * this routine will be performed automatically on next buffer
+ * transmission, but if desired, calling this routine will invoke
+ * this action on demand.
+ *
+ * @Param[in] h_fm_port A handle to a FM Port module.
+ *
+ * @Cautions Allowed only following fm_port_init().
+ * NOTE - This routine can be used only when working in
+ * Independent-Mode mode.
+ */
+void fm_port_im_tx_conf(t_handle h_fm_port);
+
+uint32_t fm_port_im_rx(t_handle h_fm_port);
+
+/** @} */ /* end of FM_PORT_runtime_data_grp group */
+/** @} */ /* end of FM_PORT_grp group */
+/** @} */ /* end of FM_grp group */
+#endif /* __FM_PORT_EXT_H */
new file mode 100644
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __NCSW_EXT_H
+#define __NCSW_EXT_H
+
+#include <stdint.h>
+
+#define PTR_TO_UINT(_ptr) ((uintptr_t)(_ptr))
+#define UINT_TO_PTR(_val) ((void *)(uintptr_t)(_val))
+
+/* phys_address_t should be uintptr_t */
+typedef uint64_t phys_address_t;
+
+/*
+ * @Description Possible RxStore callback responses.
+ */
+typedef enum e_rx_store_response {
+ e_RX_STORE_RESPONSE_PAUSE
+ /**< Pause invoking callback with received data; in polling
+ * mode, start again invoking callback only next time user
+ * invokes the receive routine; in interrupt mode, start again
+ * invoking callback only next time a receive event triggers an
+ * interrupt; in all cases, received data that are pending are
+ * not lost, rather, their processing is temporarily deferred;
+ * in all cases, received data are processed in the order in
+ * which they were received.
+ */
+ , e_RX_STORE_RESPONSE_CONTINUE
+ /**< Continue invoking callback with received data. */
+} e_rx_store_response;
+
+
+/*
+ * @Description General Handle
+ */
+typedef void *t_handle; /**< handle, used as object's descriptor */
+
+/* @} */
+
+/*
+ * @Function t_get_buf_function
+ *
+ * @Description User callback function called by driver to get data buffer.
+ *
+ * User provides this function. Driver invokes it.
+ *
+ * @Param[in] h_buffer_pool A handle to buffer pool manager
+ * @Param[out] p_buf_context_handle Returns the user's private context that
+ * should be associated with the buffer
+ *
+ * @Return Pointer to data buffer, NULL if error
+ */
+typedef uint8_t * (t_get_buf_function)(t_handle h_buffer_pool,
+ t_handle *p_buf_context_handle);
+
+/*
+ * @Function t_put_buf_function
+ *
+ * @Description User callback function called by driver to return data buffer.
+ * User provides this function. Driver invokes it.
+ *
+ * @Param[in] h_buffer_pool A handle to buffer pool manager
+ * @Param[in] p_buffer A pointer to buffer to return
+ * @Param[in] h_buf_context The user's private context associated
+ * with the returned buffer
+ *
+ * @Return E_OK on success; Error code otherwise
+ */
+typedef uint32_t (t_put_buf_function)(t_handle h_buffer_pool,
+ uint8_t *p_buffer,
+ t_handle h_buf_context);
+
+/*
+ * @Function t_phys_to_virt
+ *
+ * @Description Translates a physical address to the matching virtual address.
+ *
+ * @Param[in] addr The physical address to translate.
+ *
+ * @Return Virtual address.
+ */
+typedef void *t_phys_to_virt(phys_address_t addr);
+
+/*
+ * @Function t_virt_to_phys
+ *
+ * @Description Translates a virtual address to the matching physical address.
+ *
+ * @Param[in] addr The virtual address to translate.
+ *
+ * @Return Physical address.
+ */
+typedef phys_address_t t_virt_to_phys(void *addr);
+
+/*
+ * @Description Buffer Pool Information Structure.
+ */
+typedef struct t_buffer_pool_info {
+ t_handle h_buffer_pool;
+ /**< A handle to the buffer pool mgr */
+ t_get_buf_function *f_get_buf;
+ /**< User callback to get a free buffer */
+ t_put_buf_function *f_put_buf;
+ /**< User callback to return a buffer */
+ uint16_t buffer_size;
+ /**< Buffer size (in bytes) */
+ t_phys_to_virt *f_phys_to_virt;
+ /**< User callback to translate pool buffers physical addresses
+ * to virtual addresses
+ */
+ t_virt_to_phys *f_virt_to_phys;
+ /**< User callback to translate pool buffers virtual addresses
+ * to physical addresses
+ */
+} t_buffer_pool_info;
+
+/*
+ * @Description User callback function called by driver with receive data.
+ * User provides this function. Driver invokes it.
+ *
+ * @Param[in] h_app Application's handle, as was provided to the
+ * driver by the user
+ * @Param[in] queue_id Receive queue ID
+ * @Param[in] p_data Pointer to the buffer with received data
+ * @Param[in] h_buf_context The user's private context associated with the
+ * given data buffer
+ * @Param[in] length Length of received data
+ * @Param[in] status Receive status and errors
+ * @Param[in] position Position of buffer in frame
+ * @Param[in] flags Driver-dependent information
+ *
+ * @Retval e_RX_STORE_RESPONSE_CONTINUE order the driver to continue Rx
+ * operation for all ready data.
+ * @Retval e_RX_STORE_RESPONSE_PAUSE order the driver to stop Rx ops.
+ */
+typedef e_rx_store_response(t_rx_store_function)(t_handle h_app,
+ uint32_t queue_id,
+ uint8_t *p_data,
+ t_handle h_buf_context,
+ uint32_t length,
+ uint16_t status,
+ uint8_t position,
+ uint32_t flags);
+
+typedef struct t_device {
+ uintptr_t id; /**< the device id */
+ int fd; /**< the device file descriptor */
+ t_handle h_user_priv;
+ uint32_t owners;
+} t_device;
+
+t_handle create_device(t_handle h_user_priv, t_handle h_dev_id);
+t_handle get_device_id(t_handle h_dev);
+
+#endif /* __NCSW_EXT_H */
new file mode 100644
@@ -0,0 +1,411 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2019 NXP
+ */
+
+#ifndef __NET_EXT_H
+#define __NET_EXT_H
+
+#include "ncsw_ext.h"
+
+/*
+ * @Description This file contains common and general netcomm headers
+ * definitions.
+ */
+
+typedef uint8_t ioc_header_field_ppp_t;
+
+#define IOC_NET_HF_PPP_PID (1)
+#define IOC_NET_HF_PPP_COMPRESSED (IOC_NET_HF_PPP_PID << 1)
+#define IOC_NET_HF_PPP_ALL_FIELDS ((IOC_NET_HF_PPP_PID << 2) - 1)
+
+typedef uint8_t ioc_header_field_pppoe_t;
+
+#define ioc_net_hf_pppo_e_ver (1)
+#define ioc_net_hf_pppo_e_type (ioc_net_hf_pppo_e_ver << 1)
+#define ioc_net_hf_pppo_e_code (ioc_net_hf_pppo_e_ver << 2)
+#define ioc_net_hf_pppo_e_sid (ioc_net_hf_pppo_e_ver << 3)
+#define ioc_net_hf_pppo_e_len (ioc_net_hf_pppo_e_ver << 4)
+#define ioc_net_hf_pppo_e_session (ioc_net_hf_pppo_e_ver << 5)
+#define ioc_net_hf_pppo_e_pid (ioc_net_hf_pppo_e_ver << 6)
+#define ioc_net_hf_pppo_e_all_fields ((ioc_net_hf_pppo_e_ver << 7) - 1)
+
+#define IOC_NET_HF_PPPMUX_PID (1)
+#define IOC_NET_HF_PPPMUX_CKSUM (IOC_NET_HF_PPPMUX_PID << 1)
+#define IOC_NET_HF_PPPMUX_COMPRESSED (IOC_NET_HF_PPPMUX_PID << 2)
+#define IOC_NET_HF_PPPMUX_ALL_FIELDS ((IOC_NET_HF_PPPMUX_PID << 3) - 1)
+
+#define IOC_NET_HF_PPPMUX_SUBFRAME_PFF (1)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_LXT (IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 1)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_LEN (IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 2)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_PID (IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 3)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_USE_PID \
+ (IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 4)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_ALL_FIELDS \
+ ((IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 5) - 1)
+
+typedef uint8_t ioc_header_field_eth_t;
+
+#define IOC_NET_HF_ETH_DA (1)
+#define IOC_NET_HF_ETH_SA (IOC_NET_HF_ETH_DA << 1)
+#define IOC_NET_HF_ETH_LENGTH (IOC_NET_HF_ETH_DA << 2)
+#define IOC_NET_HF_ETH_TYPE (IOC_NET_HF_ETH_DA << 3)
+#define IOC_NET_HF_ETH_FINAL_CKSUM (IOC_NET_HF_ETH_DA << 4)
+#define IOC_NET_HF_ETH_PADDING (IOC_NET_HF_ETH_DA << 5)
+#define IOC_NET_HF_ETH_ALL_FIELDS ((IOC_NET_HF_ETH_DA << 6) - 1)
+
+#define IOC_NET_HF_ETH_ADDR_SIZE 6
+
+typedef uint16_t ioc_header_field_ip_t;
+
+#define IOC_NET_HF_IP_VER (1)
+#define IOC_NET_HF_IP_DSCP (IOC_NET_HF_IP_VER << 2)
+#define IOC_NET_HF_IP_ECN (IOC_NET_HF_IP_VER << 3)
+#define IOC_NET_HF_IP_PROTO (IOC_NET_HF_IP_VER << 4)
+
+#define IOC_NET_HF_IP_PROTO_SIZE 1
+
+typedef uint16_t ioc_header_field_ipv4_t;
+
+#define ioc_net_hf_ipv_4_ver (1)
+#define ioc_net_hf_ipv_4_hdr_len (ioc_net_hf_ipv_4_ver << 1)
+#define ioc_net_hf_ipv_4_tos (ioc_net_hf_ipv_4_ver << 2)
+#define ioc_net_hf_ipv_4_total_len (ioc_net_hf_ipv_4_ver << 3)
+#define ioc_net_hf_ipv_4_id (ioc_net_hf_ipv_4_ver << 4)
+#define ioc_net_hf_ipv_4_flag_d (ioc_net_hf_ipv_4_ver << 5)
+#define ioc_net_hf_ipv_4_flag_m (ioc_net_hf_ipv_4_ver << 6)
+#define ioc_net_hf_ipv_4_offset (ioc_net_hf_ipv_4_ver << 7)
+#define ioc_net_hf_ipv_4_ttl (ioc_net_hf_ipv_4_ver << 8)
+#define ioc_net_hf_ipv_4_proto (ioc_net_hf_ipv_4_ver << 9)
+#define ioc_net_hf_ipv_4_cksum (ioc_net_hf_ipv_4_ver << 10)
+#define ioc_net_hf_ipv_4_src_ip (ioc_net_hf_ipv_4_ver << 11)
+#define ioc_net_hf_ipv_4_dst_ip (ioc_net_hf_ipv_4_ver << 12)
+#define ioc_net_hf_ipv_4_opts (ioc_net_hf_ipv_4_ver << 13)
+#define ioc_net_hf_ipv_4_opts_COUNT (ioc_net_hf_ipv_4_ver << 14)
+#define ioc_net_hf_ipv_4_all_fields ((ioc_net_hf_ipv_4_ver << 15) - 1)
+
+#define ioc_net_hf_ipv_4_addr_size 4
+#define ioc_net_hf_ipv_4_proto_SIZE 1
+
+typedef uint8_t ioc_header_field_ipv6_t;
+
+#define ioc_net_hf_ipv_6_ver (1)
+#define ioc_net_hf_ipv_6_tc (ioc_net_hf_ipv_6_ver << 1)
+#define ioc_net_hf_ipv_6_src_ip (ioc_net_hf_ipv_6_ver << 2)
+#define ioc_net_hf_ipv_6_dst_ip (ioc_net_hf_ipv_6_ver << 3)
+#define ioc_net_hf_ipv_6_next_hdr (ioc_net_hf_ipv_6_ver << 4)
+#define ioc_net_hf_ipv_6_fl (ioc_net_hf_ipv_6_ver << 5)
+#define ioc_net_hf_ipv_6_hop_limit (ioc_net_hf_ipv_6_ver << 6)
+#define ioc_net_hf_ipv_6_all_fields ((ioc_net_hf_ipv_6_ver << 7) - 1)
+
+#define ioc_net_hf_ipv6_addr_size 16
+#define ioc_net_hf_ipv_6_next_hdr_SIZE 1
+
+#define IOC_NET_HF_ICMP_TYPE (1)
+#define IOC_NET_HF_ICMP_CODE (IOC_NET_HF_ICMP_TYPE << 1)
+#define IOC_NET_HF_ICMP_CKSUM (IOC_NET_HF_ICMP_TYPE << 2)
+#define IOC_NET_HF_ICMP_ID (IOC_NET_HF_ICMP_TYPE << 3)
+#define IOC_NET_HF_ICMP_SQ_NUM (IOC_NET_HF_ICMP_TYPE << 4)
+#define IOC_NET_HF_ICMP_ALL_FIELDS ((IOC_NET_HF_ICMP_TYPE << 5) - 1)
+
+#define IOC_NET_HF_ICMP_CODE_SIZE 1
+#define IOC_NET_HF_ICMP_TYPE_SIZE 1
+
+#define IOC_NET_HF_IGMP_VERSION (1)
+#define IOC_NET_HF_IGMP_TYPE (IOC_NET_HF_IGMP_VERSION << 1)
+#define IOC_NET_HF_IGMP_CKSUM (IOC_NET_HF_IGMP_VERSION << 2)
+#define IOC_NET_HF_IGMP_DATA (IOC_NET_HF_IGMP_VERSION << 3)
+#define IOC_NET_HF_IGMP_ALL_FIELDS ((IOC_NET_HF_IGMP_VERSION << 4) - 1)
+
+typedef uint16_t ioc_header_field_tcp_t;
+
+#define IOC_NET_HF_TCP_PORT_SRC (1)
+#define IOC_NET_HF_TCP_PORT_DST (IOC_NET_HF_TCP_PORT_SRC << 1)
+#define IOC_NET_HF_TCP_SEQ (IOC_NET_HF_TCP_PORT_SRC << 2)
+#define IOC_NET_HF_TCP_ACK (IOC_NET_HF_TCP_PORT_SRC << 3)
+#define IOC_NET_HF_TCP_OFFSET (IOC_NET_HF_TCP_PORT_SRC << 4)
+#define IOC_NET_HF_TCP_FLAGS (IOC_NET_HF_TCP_PORT_SRC << 5)
+#define IOC_NET_HF_TCP_WINDOW (IOC_NET_HF_TCP_PORT_SRC << 6)
+#define IOC_NET_HF_TCP_CKSUM (IOC_NET_HF_TCP_PORT_SRC << 7)
+#define IOC_NET_HF_TCP_URGPTR (IOC_NET_HF_TCP_PORT_SRC << 8)
+#define IOC_NET_HF_TCP_OPTS (IOC_NET_HF_TCP_PORT_SRC << 9)
+#define IOC_NET_HF_TCP_OPTS_COUNT (IOC_NET_HF_TCP_PORT_SRC << 10)
+#define IOC_NET_HF_TCP_ALL_FIELDS ((IOC_NET_HF_TCP_PORT_SRC << 11) - 1)
+
+#define IOC_NET_HF_TCP_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_sctp_t;
+
+#define IOC_NET_HF_SCTP_PORT_SRC (1)
+#define IOC_NET_HF_SCTP_PORT_DST (IOC_NET_HF_SCTP_PORT_SRC << 1)
+#define IOC_NET_HF_SCTP_VER_TAG (IOC_NET_HF_SCTP_PORT_SRC << 2)
+#define IOC_NET_HF_SCTP_CKSUM (IOC_NET_HF_SCTP_PORT_SRC << 3)
+#define IOC_NET_HF_SCTP_ALL_FIELDS ((IOC_NET_HF_SCTP_PORT_SRC << 4) - 1)
+
+#define IOC_NET_HF_SCTP_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_dccp_t;
+
+#define IOC_NET_HF_DCCP_PORT_SRC (1)
+#define IOC_NET_HF_DCCP_PORT_DST (IOC_NET_HF_DCCP_PORT_SRC << 1)
+#define IOC_NET_HF_DCCP_ALL_FIELDS ((IOC_NET_HF_DCCP_PORT_SRC << 2) - 1)
+
+#define IOC_NET_HF_DCCP_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_udp_t;
+
+#define IOC_NET_HF_UDP_PORT_SRC (1)
+#define IOC_NET_HF_UDP_PORT_DST (IOC_NET_HF_UDP_PORT_SRC << 1)
+#define IOC_NET_HF_UDP_LEN (IOC_NET_HF_UDP_PORT_SRC << 2)
+#define IOC_NET_HF_UDP_CKSUM (IOC_NET_HF_UDP_PORT_SRC << 3)
+#define IOC_NET_HF_UDP_ALL_FIELDS ((IOC_NET_HF_UDP_PORT_SRC << 4) - 1)
+
+#define IOC_NET_HF_UDP_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_udp_lite_t;
+
+#define IOC_NET_HF_UDP_LITE_PORT_SRC (1)
+#define IOC_NET_HF_UDP_LITE_PORT_DST (IOC_NET_HF_UDP_LITE_PORT_SRC << 1)
+#define IOC_NET_HF_UDP_LITE_ALL_FIELDS \
+ ((IOC_NET_HF_UDP_LITE_PORT_SRC << 2) - 1)
+
+#define IOC_NET_HF_UDP_LITE_PORT_SIZE 2
+
+typedef uint8_t ioc_header_field_udp_encap_esp_t;
+
+#define IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC (1)
+#define IOC_NET_HF_UDP_ENCAP_ESP_PORT_DST \
+ (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 1)
+#define IOC_NET_HF_UDP_ENCAP_ESP_LEN \
+ (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 2)
+#define IOC_NET_HF_UDP_ENCAP_ESP_CKSUM \
+ (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 3)
+#define IOC_NET_HF_UDP_ENCAP_ESP_SPI \
+ (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 4)
+#define IOC_NET_HF_UDP_ENCAP_ESP_SEQUENCE_NUM \
+ (IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 5)
+#define IOC_NET_HF_UDP_ENCAP_ESP_ALL_FIELDS \
+ ((IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 6) - 1)
+
+#define IOC_NET_HF_UDP_ENCAP_ESP_PORT_SIZE 2
+#define IOC_NET_HF_UDP_ENCAP_ESP_SPI_SIZE 4
+
+#define IOC_NET_HF_IPHC_CID (1)
+#define IOC_NET_HF_IPHC_CID_TYPE (IOC_NET_HF_IPHC_CID << 1)
+#define IOC_NET_HF_IPHC_HCINDEX (IOC_NET_HF_IPHC_CID << 2)
+#define IOC_NET_HF_IPHC_GEN (IOC_NET_HF_IPHC_CID << 3)
+#define IOC_NET_HF_IPHC_D_BIT (IOC_NET_HF_IPHC_CID << 4)
+#define IOC_NET_HF_IPHC_ALL_FIELDS ((IOC_NET_HF_IPHC_CID << 5) - 1)
+
+#define IOC_NET_HF_SCTP_CHUNK_DATA_TYPE (1)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_FLAGS \
+ (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 1)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_LENGTH \
+ (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 2)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_TSN \
+ (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 3)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_STREAM_ID \
+ (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 4)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_STREAM_SQN \
+ (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 5)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_PAYLOAD_PID \
+ (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 6)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_UNORDERED \
+ (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 7)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_BEGGINING \
+ (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 8)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_END \
+ (IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 9)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_ALL_FIELDS \
+ ((IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 10) - 1)
+
+#define ioc_net_hf_l2tpv_2_type_bit (1)
+#define ioc_net_hf_l2tpv_2_length_bit (ioc_net_hf_l2tpv_2_type_bit << 1)
+#define ioc_net_hf_l2tpv_2_sequence_bit (ioc_net_hf_l2tpv_2_type_bit << 2)
+#define ioc_net_hf_l2tpv_2_offset_bit (ioc_net_hf_l2tpv_2_type_bit << 3)
+#define ioc_net_hf_l2tpv_2_priority_bit (ioc_net_hf_l2tpv_2_type_bit << 4)
+#define ioc_net_hf_l2tpv_2_version (ioc_net_hf_l2tpv_2_type_bit << 5)
+#define ioc_net_hf_l2tpv_2_len (ioc_net_hf_l2tpv_2_type_bit << 6)
+#define ioc_net_hf_l2tpv_2_tunnel_id (ioc_net_hf_l2tpv_2_type_bit << 7)
+#define ioc_net_hf_l2tpv_2_session_id (ioc_net_hf_l2tpv_2_type_bit << 8)
+#define ioc_net_hf_l2tpv_2_ns (ioc_net_hf_l2tpv_2_type_bit << 9)
+#define ioc_net_hf_l2tpv_2_nr (ioc_net_hf_l2tpv_2_type_bit << 10)
+#define ioc_net_hf_l2tpv_2_offset_size (ioc_net_hf_l2tpv_2_type_bit << 11)
+#define ioc_net_hf_l2tpv_2_first_byte (ioc_net_hf_l2tpv_2_type_bit << 12)
+#define ioc_net_hf_l2tpv_2_all_fields \
+ ((ioc_net_hf_l2tpv_2_type_bit << 13) - 1)
+
+#define ioc_net_hf_l2tpv_3_ctrl_type_bit (1)
+#define ioc_net_hf_l2tpv_3_ctrl_length_bit \
+ (ioc_net_hf_l2tpv_3_ctrl_type_bit << 1)
+#define ioc_net_hf_l2tpv_3_ctrl_sequence_bit \
+ (ioc_net_hf_l2tpv_3_ctrl_type_bit << 2)
+#define ioc_net_hf_l2tpv_3_ctrl_version (ioc_net_hf_l2tpv_3_ctrl_type_bit << 3)
+#define ioc_net_hf_l2tpv_3_ctrl_length (ioc_net_hf_l2tpv_3_ctrl_type_bit << 4)
+#define ioc_net_hf_l2tpv_3_ctrl_control (ioc_net_hf_l2tpv_3_ctrl_type_bit << 5)
+#define ioc_net_hf_l2tpv_3_ctrl_sent (ioc_net_hf_l2tpv_3_ctrl_type_bit << 6)
+#define ioc_net_hf_l2tpv_3_ctrl_recv (ioc_net_hf_l2tpv_3_ctrl_type_bit << 7)
+#define ioc_net_hf_l2tpv_3_ctrl_first_byte \
+ (ioc_net_hf_l2tpv_3_ctrl_type_bit << 8)
+#define ioc_net_hf_l2tpv_3_ctrl_all_fields \
+ ((ioc_net_hf_l2tpv_3_ctrl_type_bit << 9) - 1)
+
+#define ioc_net_hf_l2tpv_3_sess_type_bit (1)
+#define ioc_net_hf_l2tpv_3_sess_version (ioc_net_hf_l2tpv_3_sess_type_bit << 1)
+#define ioc_net_hf_l2tpv_3_sess_id (ioc_net_hf_l2tpv_3_sess_type_bit << 2)
+#define ioc_net_hf_l2tpv_3_sess_cookie (ioc_net_hf_l2tpv_3_sess_type_bit << 3)
+#define ioc_net_hf_l2tpv_3_sess_all_fields \
+ ((ioc_net_hf_l2tpv_3_sess_type_bit << 4) - 1)
+
+typedef uint8_t ioc_header_field_vlan_t;
+
+#define IOC_NET_HF_VLAN_VPRI (1)
+#define IOC_NET_HF_VLAN_CFI (IOC_NET_HF_VLAN_VPRI << 1)
+#define IOC_NET_HF_VLAN_VID (IOC_NET_HF_VLAN_VPRI << 2)
+#define IOC_NET_HF_VLAN_LENGTH (IOC_NET_HF_VLAN_VPRI << 3)
+#define IOC_NET_HF_VLAN_TYPE (IOC_NET_HF_VLAN_VPRI << 4)
+#define IOC_NET_HF_VLAN_ALL_FIELDS ((IOC_NET_HF_VLAN_VPRI << 5) - 1)
+
+#define IOC_NET_HF_VLAN_TCI (IOC_NET_HF_VLAN_VPRI | \
+ IOC_NET_HF_VLAN_CFI | \
+ IOC_NET_HF_VLAN_VID)
+
+typedef uint8_t ioc_header_field_llc_t;
+
+#define IOC_NET_HF_LLC_DSAP (1)
+#define IOC_NET_HF_LLC_SSAP (IOC_NET_HF_LLC_DSAP << 1)
+#define IOC_NET_HF_LLC_CTRL (IOC_NET_HF_LLC_DSAP << 2)
+#define IOC_NET_HF_LLC_ALL_FIELDS ((IOC_NET_HF_LLC_DSAP << 3) - 1)
+
+#define IOC_NET_HF_NLPID_NLPID (1)
+#define IOC_NET_HF_NLPID_ALL_FIELDS ((IOC_NET_HF_NLPID_NLPID << 1) - 1)
+
+typedef uint8_t ioc_header_field_snap_t;
+
+#define IOC_NET_HF_SNAP_OUI (1)
+#define IOC_NET_HF_SNAP_PID (IOC_NET_HF_SNAP_OUI << 1)
+#define IOC_NET_HF_SNAP_ALL_FIELDS ((IOC_NET_HF_SNAP_OUI << 2) - 1)
+
+typedef uint8_t ioc_header_field_llc_snap_t;
+
+#define IOC_NET_HF_LLC_SNAP_TYPE (1)
+#define IOC_NET_HF_LLC_SNAP_ALL_FIELDS ((IOC_NET_HF_LLC_SNAP_TYPE << 1) - 1)
+
+#define IOC_NET_HF_ARP_HTYPE (1)
+#define IOC_NET_HF_ARP_PTYPE (IOC_NET_HF_ARP_HTYPE << 1)
+#define IOC_NET_HF_ARP_HLEN (IOC_NET_HF_ARP_HTYPE << 2)
+#define IOC_NET_HF_ARP_PLEN (IOC_NET_HF_ARP_HTYPE << 3)
+#define IOC_NET_HF_ARP_OPER (IOC_NET_HF_ARP_HTYPE << 4)
+#define IOC_NET_HF_ARP_SHA (IOC_NET_HF_ARP_HTYPE << 5)
+#define IOC_NET_HF_ARP_SPA (IOC_NET_HF_ARP_HTYPE << 6)
+#define IOC_NET_HF_ARP_THA (IOC_NET_HF_ARP_HTYPE << 7)
+#define IOC_NET_HF_ARP_TPA (IOC_NET_HF_ARP_HTYPE << 8)
+#define IOC_NET_HF_ARP_ALL_FIELDS ((IOC_NET_HF_ARP_HTYPE << 9) - 1)
+
+#define IOC_NET_HF_RFC2684_LLC (1)
+#define IOC_NET_HF_RFC2684_NLPID (IOC_NET_HF_RFC2684_LLC << 1)
+#define IOC_NET_HF_RFC2684_OUI (IOC_NET_HF_RFC2684_LLC << 2)
+#define IOC_NET_HF_RFC2684_PID (IOC_NET_HF_RFC2684_LLC << 3)
+#define IOC_NET_HF_RFC2684_VPN_OUI (IOC_NET_HF_RFC2684_LLC << 4)
+#define IOC_NET_HF_RFC2684_VPN_IDX (IOC_NET_HF_RFC2684_LLC << 5)
+#define IOC_NET_HF_RFC2684_ALL_FIELDS ((IOC_NET_HF_RFC2684_LLC << 6) - 1)
+
+#define IOC_NET_HF_USER_DEFINED_SRCPORT (1)
+#define IOC_NET_HF_USER_DEFINED_PCDID (IOC_NET_HF_USER_DEFINED_SRCPORT << 1)
+#define IOC_NET_HF_USER_DEFINED_ALL_FIELDS \
+ ((IOC_NET_HF_USER_DEFINED_SRCPORT << 2) - 1)
+
+#define IOC_NET_HF_PAYLOAD_BUFFER (1)
+#define IOC_NET_HF_PAYLOAD_SIZE (IOC_NET_HF_PAYLOAD_BUFFER << 1)
+#define IOC_NET_HF_MAX_FRM_SIZE (IOC_NET_HF_PAYLOAD_BUFFER << 2)
+#define IOC_NET_HF_MIN_FRM_SIZE (IOC_NET_HF_PAYLOAD_BUFFER << 3)
+#define IOC_NET_HF_PAYLOAD_TYPE (IOC_NET_HF_PAYLOAD_BUFFER << 4)
+#define IOC_NET_HF_FRAME_SIZE (IOC_NET_HF_PAYLOAD_BUFFER << 5)
+#define IOC_NET_HF_PAYLOAD_ALL_FIELDS ((IOC_NET_HF_PAYLOAD_BUFFER << 6) - 1)
+
+typedef uint8_t ioc_header_field_gre_t;
+
+#define IOC_NET_HF_GRE_TYPE (1)
+#define IOC_NET_HF_GRE_ALL_FIELDS ((IOC_NET_HF_GRE_TYPE << 1) - 1)
+
+typedef uint8_t ioc_header_field_minencap_t;
+
+#define IOC_NET_HF_MINENCAP_SRC_IP (1)
+#define IOC_NET_HF_MINENCAP_DST_IP (IOC_NET_HF_MINENCAP_SRC_IP << 1)
+#define IOC_NET_HF_MINENCAP_TYPE (IOC_NET_HF_MINENCAP_SRC_IP << 2)
+#define IOC_NET_HF_MINENCAP_ALL_FIELDS ((IOC_NET_HF_MINENCAP_SRC_IP << 3) - 1)
+
+typedef uint8_t ioc_header_field_ipsec_ah_t;
+
+#define IOC_NET_HF_IPSEC_AH_SPI (1)
+#define IOC_NET_HF_IPSEC_AH_NH (IOC_NET_HF_IPSEC_AH_SPI << 1)
+#define IOC_NET_HF_IPSEC_AH_ALL_FIELDS ((IOC_NET_HF_IPSEC_AH_SPI << 2) - 1)
+
+typedef uint8_t ioc_header_field_ipsec_esp_t;
+
+#define IOC_NET_HF_IPSEC_ESP_SPI (1)
+#define IOC_NET_HF_IPSEC_ESP_SEQUENCE_NUM (IOC_NET_HF_IPSEC_ESP_SPI << 1)
+#define IOC_NET_HF_IPSEC_ESP_ALL_FIELDS ((IOC_NET_HF_IPSEC_ESP_SPI << 2) - 1)
+
+#define IOC_NET_HF_IPSEC_ESP_SPI_SIZE 4
+
+
+typedef uint8_t ioc_header_field_mpls_t;
+
+#define IOC_NET_HF_MPLS_LABEL_STACK (1)
+#define IOC_NET_HF_MPLS_LABEL_STACK_ALL_FIELDS \
+ ((IOC_NET_HF_MPLS_LABEL_STACK << 1) - 1)
+
+typedef uint8_t ioc_header_field_macsec_t;
+
+#define IOC_NET_HF_MACSEC_SECTAG (1)
+#define IOC_NET_HF_MACSEC_ALL_FIELDS ((IOC_NET_HF_MACSEC_SECTAG << 1) - 1)
+
+typedef enum {
+ HEADER_TYPE_NONE = 0,
+ HEADER_TYPE_PAYLOAD,
+ HEADER_TYPE_ETH,
+ HEADER_TYPE_VLAN,
+ HEADER_TYPE_IPV4,
+ HEADER_TYPE_IPV6,
+ HEADER_TYPE_IP,
+ HEADER_TYPE_TCP,
+ HEADER_TYPE_UDP,
+ HEADER_TYPE_UDP_LITE,
+ HEADER_TYPE_IPHC,
+ HEADER_TYPE_SCTP,
+ HEADER_TYPE_SCTP_CHUNK_DATA,
+ HEADER_TYPE_PPPOE,
+ HEADER_TYPE_PPP,
+ HEADER_TYPE_PPPMUX,
+ HEADER_TYPE_PPPMUX_SUBFRAME,
+ HEADER_TYPE_L2TPV2,
+ HEADER_TYPE_L2TPV3_CTRL,
+ HEADER_TYPE_L2TPV3_SESS,
+ HEADER_TYPE_LLC,
+ HEADER_TYPE_LLC_SNAP,
+ HEADER_TYPE_NLPID,
+ HEADER_TYPE_SNAP,
+ HEADER_TYPE_MPLS,
+ HEADER_TYPE_IPSEC_AH,
+ HEADER_TYPE_IPSEC_ESP,
+ HEADER_TYPE_UDP_ENCAP_ESP, /* RFC 3948 */
+ HEADER_TYPE_MACSEC,
+ HEADER_TYPE_GRE,
+ HEADER_TYPE_MINENCAP,
+ HEADER_TYPE_DCCP,
+ HEADER_TYPE_ICMP,
+ HEADER_TYPE_IGMP,
+ HEADER_TYPE_ARP,
+ HEADER_TYPE_CAPWAP,
+ HEADER_TYPE_CAPWAP_DTLS,
+ HEADER_TYPE_RFC2684,
+ HEADER_TYPE_USER_DEFINED_L2,
+ HEADER_TYPE_USER_DEFINED_L3,
+ HEADER_TYPE_USER_DEFINED_L4,
+ HEADER_TYPE_USER_DEFINED_SHIM1,
+ HEADER_TYPE_USER_DEFINED_SHIM2,
+ MAX_HEADER_TYPE_COUNT
+} ioc_net_header_type;
+
+#endif /* __NET_EXT_H */
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2018 NXP
+# Copyright 2018-2019 NXP
if not is_linux
build = false
@@ -8,6 +8,7 @@ endif
deps += ['mempool_dpaa']
sources = files('dpaa_ethdev.c',
+ 'fmlib/fm_lib.c',
'dpaa_rxtx.c')
if cc.has_argument('-Wno-pointer-arith')