From patchwork Mon Mar 1 23:25:05 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 388782 Delivered-To: patch@linaro.org Received: by 2002:a02:290e:0:0:0:0:0 with SMTP id p14csp3773805jap; Mon, 1 Mar 2021 15:26:56 -0800 (PST) X-Google-Smtp-Source: ABdhPJyTQ5iaI90SgGqMN8w0mb0rdiJlLfebhI0Jhn5BWVGUrm2ltC1+VBqX/OWzqkviMqAlmVQ+ X-Received: by 2002:a63:c44d:: with SMTP id m13mr15858234pgg.64.1614641216445; Mon, 01 Mar 2021 15:26:56 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1614641216; cv=none; d=google.com; s=arc-20160816; b=LlQF6P9MoXJRgSiFwJkSmD9BfPro4GHeOAurivrLU9W1OwzOZQZ/e+ijjQl8p09KFf M3zgTgX+UQitXtA0pqmLMSJq/+S/PDCS50yQnLRkRj4aGNzbnLKdJZXZTpY7IsP4qw6X CR83dYxG8TeFEoTlgg08hGznL55AwLdzob017pcu//j9kgwrt9ceqU17Wfw1AI6YpM62 /L1xfn0J0PHX0gXD3UXSDt1fh3ldBpZji6bGaIM11z9DFZ9z25qKxjp2MRketobLMvQP xFJQCAERiTphR4fDsZQ8JQAodh+S8loXs3XGsbWEqQrhYg1J4kGSjULIAe2UkeZM/9Sz 69UA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:content-transfer-encoding:cc:list-subscribe :list-help:list-post:list-archive:list-unsubscribe:list-id :precedence:mime-version:references:in-reply-to:message-id:date :subject:to:from:dkim-signature:delivered-to; bh=uNMzTIt33MJQIlR3FBSejEgcVjy5vI+AdIte6xqUltg=; b=i/0GtzK4GnHbRbL0vTctrwv/+Kq50Kl4MAbHFNnXJHHofjkficzM5z9hSIvfHaEpX3 iBYXE3CQT4b/wvihiTjjC+VeuXKfTTGdXQwg3KrynoSHEGQDBGhDPSBiI3hFy0D+c9cp DQNSrMZ1J61OBu0I8oIv3uphMUn6hwKhkMRMelbOnusJ6fFjQ7WDv1MOyn2mItuXj+Uc DyEq3O54fJpxkN6xLJVKbFtuvcf79UWjPiqgprjS5klyVqwhm9A87feInc27KVQgGbJ+ dBPbK1GokwfJv1NXFT5geHam1DrLwoyD4QXHvhxB9tZloz/Wn6qK+QmChwUwZbK0exwd fV/w== ARC-Authentication-Results: i=1; mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=YG7F2iob; spf=pass (google.com: best guess record for domain of dri-devel-bounces@lists.freedesktop.org designates 131.252.210.177 as permitted sender) smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from gabe.freedesktop.org (gabe.freedesktop.org. [131.252.210.177]) by mx.google.com with ESMTPS id q16si781991pjg.22.2021.03.01.15.26.56 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 01 Mar 2021 15:26:56 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of dri-devel-bounces@lists.freedesktop.org designates 131.252.210.177 as permitted sender) client-ip=131.252.210.177; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=YG7F2iob; spf=pass (google.com: best guess record for domain of dri-devel-bounces@lists.freedesktop.org designates 131.252.210.177 as permitted sender) smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 94B186E908; Mon, 1 Mar 2021 23:26:30 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from mail-lf1-x12e.google.com (mail-lf1-x12e.google.com [IPv6:2a00:1450:4864:20::12e]) by gabe.freedesktop.org (Postfix) with ESMTPS id 921146E8D7 for ; Mon, 1 Mar 2021 23:26:26 +0000 (UTC) Received: by mail-lf1-x12e.google.com with SMTP id d3so28282504lfg.10 for ; Mon, 01 Mar 2021 15:26:26 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=8mTFmJ9EWVLqtg/nAnyEsK4Ph69zgNCC9jsQgxyFpRY=; b=YG7F2iobrLYyvzhg7RVhXXk+arkjHU0poJp42wVUNekAwEZmfqpkEBIw+O1BZer2K0 6VDd7pwV2QM0ZySatxjyxiBHu9QVpaVZtyjwf+gnIrCcw1899k2vdIcPd+dmhEc63fiD Jw0Qg9BT/hgQmfBoCQgEpRSIstXjsImDY3T+lzWPo7vMgshkvnxv6OGnFbjosgGNJPD1 z6h81caEYgRAjlLJ1CTivCxUQZTUxZjSJA0rUAeZNyCnXtAR/DL+hO7GIKWe2CksPHC3 84ADlaTRf2GHV4B5D0d6vDrqOR4vQYBNxyXwM/Czys/HQnskZqsy73i1ihC6Jkz/K/H4 JjCg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=8mTFmJ9EWVLqtg/nAnyEsK4Ph69zgNCC9jsQgxyFpRY=; b=HKcDgXiVduA2V+NCHK66u97MjSCz+MrARrTZW28qKGvj6H6g4SRKtOe/u9vKoa1Rs0 tykBqkGkiN9H04JpLuNIoM9PiiaNevhHrRgBjdCc9MAQeXF6fXaznG8AOFlTZc8wsPs9 AJ59ZxW+/ckSY/8E60vgwdHmEDjGXkpy8KRvG5J07ZqtgOdq2ZofXI8z/O/I7KbWzqI4 y99jhoZHVO4jWDpInEzNMoA9DqIpIhSmjFZWNCU65M6gAPpmN1sqliyNUUrcAkGoPTcE jHz5GSB3mMLaDcnC9O3X86kLO4OkxCnOaYQxSG8nIAVNF7tW041mx7FSg92mOFeaheFF 62JQ== X-Gm-Message-State: AOAM531TGnLSGJ7y6u+MCx7tz4LXUS/K6zsTrUJcLSvMOVaybHQ059HK s2qoCjy6n0yeQEoFxxzfVaJTvg== X-Received: by 2002:a19:ee13:: with SMTP id g19mr10836296lfb.657.1614641184898; Mon, 01 Mar 2021 15:26:24 -0800 (PST) Received: from eriador.lan ([37.153.55.125]) by smtp.gmail.com with ESMTPSA id b20sm154749lfa.183.2021.03.01.15.26.24 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 01 Mar 2021 15:26:24 -0800 (PST) From: Dmitry Baryshkov To: Rob Clark , Sean Paul , Jonathan Marek Subject: [RFC 22/24] drm/msm/dsi: remove temp data from global pll structure Date: Tue, 2 Mar 2021 02:25:05 +0300 Message-Id: <20210301232506.3057401-23-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.30.0 In-Reply-To: <20210301232506.3057401-1-dmitry.baryshkov@linaro.org> References: <20210301232506.3057401-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Stephen Boyd , linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, David Airlie , freedreno@lists.freedesktop.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" The 7nm, 10nm and 14nm drivers would store interim data used during VCO/PLL rate setting in the global dsi_pll_Nnm structure. Move this data structures to the onstack storage. While we are at it, drop unused/static 'config' data, unused config fields, etc. Signed-off-by: Dmitry Baryshkov --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 167 ++++------ drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 342 +++++++-------------- drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 161 ++++------ 3 files changed, 221 insertions(+), 449 deletions(-) -- 2.30.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c index e5ea16e4459f..5456ba67245c 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c @@ -36,40 +36,22 @@ */ #define VCO_REF_CLK_RATE 19200000 - -struct dsi_pll_regs { - u32 pll_prop_gain_rate; - u32 pll_lockdet_rate; - u32 decimal_div_start; - u32 frac_div_start_low; - u32 frac_div_start_mid; - u32 frac_div_start_high; - u32 pll_clock_inverters; - u32 ssc_stepsize_low; - u32 ssc_stepsize_high; - u32 ssc_div_per_low; - u32 ssc_div_per_high; - u32 ssc_adjper_low; - u32 ssc_adjper_high; - u32 ssc_control; -}; +#define FRAC_BITS 18 struct dsi_pll_config { - u32 ref_freq; - bool div_override; - u32 output_div; - bool ignore_frac; - bool disable_prescaler; bool enable_ssc; bool ssc_center; - u32 dec_bits; - u32 frac_bits; - u32 lock_timer; u32 ssc_freq; u32 ssc_offset; u32 ssc_adj_per; - u32 thresh_cycles; - u32 refclk_cycles; + + /* out */ + u32 pll_prop_gain_rate; + u32 decimal_div_start; + u32 frac_div_start; + u32 pll_clock_inverters; + u32 ssc_stepsize; + u32 ssc_div_per; }; struct pll_10nm_cached_state { @@ -85,15 +67,11 @@ struct dsi_pll_10nm { struct msm_dsi_phy *phy; - u64 vco_ref_clk_rate; u64 vco_current_rate; /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */ spinlock_t postdiv_lock; - struct dsi_pll_config pll_configuration; - struct dsi_pll_regs reg_setup; - struct pll_10nm_cached_state cached_state; struct dsi_pll_10nm *slave; @@ -107,34 +85,19 @@ struct dsi_pll_10nm { */ static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX]; -static void dsi_pll_setup_config(struct dsi_pll_10nm *pll) +static void dsi_pll_setup_config(struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - - config->ref_freq = pll->vco_ref_clk_rate; - config->output_div = 1; - config->dec_bits = 8; - config->frac_bits = 18; - config->lock_timer = 64; config->ssc_freq = 31500; config->ssc_offset = 5000; config->ssc_adj_per = 2; - config->thresh_cycles = 32; - config->refclk_cycles = 256; - - config->div_override = false; - config->ignore_frac = false; - config->disable_prescaler = false; config->enable_ssc = false; - config->ssc_center = 0; + config->ssc_center = false; } -static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) +static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u64 fref = pll->vco_ref_clk_rate; + u64 fref = VCO_REF_CLK_RATE; u64 pll_freq; u64 divider; u64 dec, dec_multiple; @@ -143,40 +106,32 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) pll_freq = pll->vco_current_rate; - if (config->disable_prescaler) - divider = fref; - else - divider = fref * 2; + divider = fref * 2; - multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; dec_multiple = div_u64(pll_freq * multiplier, divider); dec = div_u64_rem(dec_multiple, multiplier, &frac); if (pll_freq <= 1900000000UL) - regs->pll_prop_gain_rate = 8; + config->pll_prop_gain_rate = 8; else if (pll_freq <= 3000000000UL) - regs->pll_prop_gain_rate = 10; + config->pll_prop_gain_rate = 10; else - regs->pll_prop_gain_rate = 12; + config->pll_prop_gain_rate = 12; if (pll_freq < 1100000000UL) - regs->pll_clock_inverters = 8; + config->pll_clock_inverters = 8; else - regs->pll_clock_inverters = 0; + config->pll_clock_inverters = 0; - regs->pll_lockdet_rate = config->lock_timer; - regs->decimal_div_start = dec; - regs->frac_div_start_low = (frac & 0xff); - regs->frac_div_start_mid = (frac & 0xff00) >> 8; - regs->frac_div_start_high = (frac & 0x30000) >> 16; + config->decimal_div_start = dec; + config->frac_div_start = frac; } #define SSC_CENTER BIT(0) #define SSC_EN BIT(1) -static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) +static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; u32 ssc_per; u32 ssc_mod; u64 ssc_step_size; @@ -187,58 +142,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) return; } - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 - 1; ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); ssc_per -= ssc_mod; - frac = regs->frac_div_start_low | - (regs->frac_div_start_mid << 8) | - (regs->frac_div_start_high << 16); - ssc_step_size = regs->decimal_div_start; - ssc_step_size *= (1 << config->frac_bits); + frac = config->frac_div_start; + ssc_step_size = config->decimal_div_start; + ssc_step_size *= (1 << FRAC_BITS); ssc_step_size += frac; ssc_step_size *= config->ssc_offset; ssc_step_size *= (config->ssc_adj_per + 1); ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); - regs->ssc_div_per_low = ssc_per & 0xFF; - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; - - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; + config->ssc_div_per = ssc_per; + config->ssc_stepsize = ssc_step_size; pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", - regs->decimal_div_start, frac, config->frac_bits); + config->decimal_div_start, frac, FRAC_BITS); pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", ssc_per, (u32)ssc_step_size, config->ssc_adj_per); } -static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll) +static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *regs = &pll->reg_setup; - if (pll->pll_configuration.enable_ssc) { + if (config->enable_ssc) { pr_debug("SSC is enabled\n"); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1, - regs->ssc_stepsize_low); + config->ssc_stepsize & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, - regs->ssc_stepsize_high); + config->ssc_stepsize >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1, - regs->ssc_div_per_low); + config->ssc_div_per & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1, - regs->ssc_div_per_high); + config->ssc_div_per >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1, - regs->ssc_adjper_low); + config->ssc_adj_per & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1, - regs->ssc_adjper_high); + config->ssc_adj_per >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL, - SSC_EN | regs->ssc_control); + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); } } @@ -268,50 +214,48 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll) dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f); } -static void dsi_pll_commit(struct dsi_pll_10nm *pll) +static void dsi_pll_commit(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *reg = &pll->reg_setup; dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1, - reg->decimal_div_start); + config->decimal_div_start); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1, - reg->frac_div_start_low); + config->frac_div_start & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1, - reg->frac_div_start_mid); + (config->frac_div_start & 0xff00) >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1, - reg->frac_div_start_high); - dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, - reg->pll_lockdet_rate); + (config->frac_div_start & 0x30000) >> 16); + dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, 64); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS, - reg->pll_clock_inverters); + config->pll_clock_inverters); } static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); + struct dsi_pll_config config; DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->phy->id, rate, parent_rate); pll_10nm->vco_current_rate = rate; - pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - dsi_pll_setup_config(pll_10nm); + dsi_pll_setup_config(&config); - dsi_pll_calc_dec_frac(pll_10nm); + dsi_pll_calc_dec_frac(pll_10nm, &config); - dsi_pll_calc_ssc(pll_10nm); + dsi_pll_calc_ssc(pll_10nm, &config); - dsi_pll_commit(pll_10nm); + dsi_pll_commit(pll_10nm, &config); dsi_pll_config_hzindep_reg(pll_10nm); - dsi_pll_ssc_commit(pll_10nm); + dsi_pll_ssc_commit(pll_10nm, &config); /* flush, ensure all register writes are done*/ wmb(); @@ -458,9 +402,8 @@ static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); - struct dsi_pll_config *config = &pll_10nm->pll_configuration; void __iomem *base = pll_10nm->phy->pll_base; - u64 ref_clk = pll_10nm->vco_ref_clk_rate; + u64 ref_clk = VCO_REF_CLK_RATE; u64 vco_rate = 0x0; u64 multiplier; u32 frac; @@ -480,7 +423,7 @@ static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, * TODO: * 1. Assumes prescaler is disabled */ - multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; pll_freq = dec * (ref_clk * 2); tmp64 = (ref_clk * 2 * frac); pll_freq += div_u64(tmp64, multiplier); @@ -562,7 +505,7 @@ static int dsi_10nm_restore_state(struct msm_dsi_phy *phy) val |= cached->pll_mux; dsi_phy_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val); - ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate); + ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, pll_10nm->vco_current_rate, VCO_REF_CLK_RATE); if (ret) { DRM_DEV_ERROR(&pll_10nm->phy->pdev->dev, "restore vco rate failed. ret=%d\n", ret); diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 36b340a99e19..88800d68b1bb 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -37,51 +37,19 @@ #define VCO_MIN_RATE 1300000000UL #define VCO_MAX_RATE 2600000000UL -#define DSI_PLL_DEFAULT_VCO_POSTDIV 1 +struct dsi_pll_config { + u64 vco_current_rate; -struct dsi_pll_input { - u32 fref; /* reference clk */ - u32 fdata; /* bit clock rate */ - u32 dsiclk_sel; /* Mux configuration (see diagram) */ u32 ssc_en; /* SSC enable/disable */ - u32 ldo_en; /* fixed params */ - u32 refclk_dbler_en; - u32 vco_measure_time; - u32 kvco_measure_time; - u32 bandgap_timer; - u32 pll_wakeup_timer; u32 plllock_cnt; - u32 plllock_rng; u32 ssc_center; u32 ssc_adj_period; u32 ssc_spread; u32 ssc_freq; - u32 pll_ie_trim; - u32 pll_ip_trim; - u32 pll_iptat_trim; - u32 pll_cpcset_cur; - u32 pll_cpmset_cur; - - u32 pll_icpmset; - u32 pll_icpcset; - - u32 pll_icpmset_p; - u32 pll_icpmset_m; - - u32 pll_icpcset_p; - u32 pll_icpcset_m; - - u32 pll_lpf_res1; - u32 pll_lpf_cap1; - u32 pll_lpf_cap2; - u32 pll_c3ctrl; - u32 pll_r3ctrl; -}; -struct dsi_pll_output { - u32 pll_txclk_en; + /* calculated */ u32 dec_start; u32 div_frac_start; u32 ssc_period; @@ -91,19 +59,6 @@ struct dsi_pll_output { u32 pll_vco_count; u32 pll_kvco_div_ref; u32 pll_kvco_count; - u32 pll_misc1; - u32 pll_lpf2_postdiv; - u32 pll_resetsm_cntrl; - u32 pll_resetsm_cntrl2; - u32 pll_resetsm_cntrl5; - u32 pll_kvco_code; - - u32 cmn_clk_cfg0; - u32 cmn_clk_cfg1; - u32 cmn_ldo_cntrl; - - u32 pll_postdiv; - u32 fcvo; }; struct pll_14nm_cached_state { @@ -117,18 +72,11 @@ struct dsi_pll_14nm { struct msm_dsi_phy *phy; - struct dsi_pll_input in; - struct dsi_pll_output out; - /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */ spinlock_t postdiv_lock; - u64 vco_current_rate; - u64 vco_ref_clk_rate; - struct pll_14nm_cached_state cached_state; - enum msm_dsi_phy_usecase uc; struct dsi_pll_14nm *slave; }; @@ -196,78 +144,50 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, return pll_locked; } -static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll) +static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf) { - pll->in.fref = pll->vco_ref_clk_rate; - pll->in.fdata = 0; - pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */ - pll->in.ldo_en = 0; /* disabled for now */ - /* fixed input */ - pll->in.refclk_dbler_en = 0; - pll->in.vco_measure_time = 5; - pll->in.kvco_measure_time = 5; - pll->in.bandgap_timer = 4; - pll->in.pll_wakeup_timer = 5; - pll->in.plllock_cnt = 1; - pll->in.plllock_rng = 0; + pconf->plllock_cnt = 1; /* * SSC is enabled by default. We might need DT props for configuring * some SSC params like PPM and center/down spread etc. */ - pll->in.ssc_en = 1; - pll->in.ssc_center = 0; /* down spread by default */ - pll->in.ssc_spread = 5; /* PPM / 1000 */ - pll->in.ssc_freq = 31500; /* default recommended */ - pll->in.ssc_adj_period = 37; - - pll->in.pll_ie_trim = 4; - pll->in.pll_ip_trim = 4; - pll->in.pll_cpcset_cur = 1; - pll->in.pll_cpmset_cur = 1; - pll->in.pll_icpmset = 4; - pll->in.pll_icpcset = 4; - pll->in.pll_icpmset_p = 0; - pll->in.pll_icpmset_m = 0; - pll->in.pll_icpcset_p = 0; - pll->in.pll_icpcset_m = 0; - pll->in.pll_lpf_res1 = 3; - pll->in.pll_lpf_cap1 = 11; - pll->in.pll_lpf_cap2 = 1; - pll->in.pll_iptat_trim = 7; - pll->in.pll_c3ctrl = 2; - pll->in.pll_r3ctrl = 1; + pconf->ssc_en = 1; + pconf->ssc_center = 0; /* down spread by default */ + pconf->ssc_spread = 5; /* PPM / 1000 */ + pconf->ssc_freq = 31500; /* default recommended */ + pconf->ssc_adj_period = 37; } #define CEIL(x, y) (((x) + ((y) - 1)) / (y)) -static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) +static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { u32 period, ssc_period; u32 ref, rem; u64 step_size; - DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate); + DBG("vco=%lld ref=%d", pconf->vco_current_rate, VCO_REF_CLK_RATE); - ssc_period = pll->in.ssc_freq / 500; - period = (u32)pll->vco_ref_clk_rate / 1000; + ssc_period = pconf->ssc_freq / 500; + period = (u32)VCO_REF_CLK_RATE / 1000; ssc_period = CEIL(period, ssc_period); ssc_period -= 1; - pll->out.ssc_period = ssc_period; + pconf->ssc_period = ssc_period; - DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq, - pll->in.ssc_spread, pll->out.ssc_period); + DBG("ssc freq=%d spread=%d period=%d", pconf->ssc_freq, + pconf->ssc_spread, pconf->ssc_period); - step_size = (u32)pll->vco_current_rate; - ref = pll->vco_ref_clk_rate; + step_size = (u32)pconf->vco_current_rate; + ref = VCO_REF_CLK_RATE; ref /= 1000; step_size = div_u64(step_size, ref); step_size <<= 20; step_size = div_u64(step_size, 1000); - step_size *= pll->in.ssc_spread; + step_size *= pconf->ssc_spread; step_size = div_u64(step_size, 1000); - step_size *= (pll->in.ssc_adj_period + 1); + step_size *= (pconf->ssc_adj_period + 1); rem = 0; step_size = div_u64_rem(step_size, ssc_period + 1, &rem); @@ -278,18 +198,16 @@ static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) step_size &= 0x0ffff; /* take lower 16 bits */ - pll->out.ssc_step_size = step_size; + pconf->ssc_step_size = step_size; } -static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) +static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; u64 multiplier = BIT(20); u64 dec_start_multiple, dec_start, pll_comp_val; u32 duration, div_frac_start; - u64 vco_clk_rate = pll->vco_current_rate; - u64 fref = pll->vco_ref_clk_rate; + u64 vco_clk_rate = pconf->vco_current_rate; + u64 fref = VCO_REF_CLK_RATE; DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref); @@ -298,14 +216,14 @@ static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) dec_start = div_u64(dec_start_multiple, multiplier); - pout->dec_start = (u32)dec_start; - pout->div_frac_start = div_frac_start; + pconf->dec_start = (u32)dec_start; + pconf->div_frac_start = div_frac_start; - if (pin->plllock_cnt == 0) + if (pconf->plllock_cnt == 0) duration = 1024; - else if (pin->plllock_cnt == 1) + else if (pconf->plllock_cnt == 1) duration = 256; - else if (pin->plllock_cnt == 2) + else if (pconf->plllock_cnt == 2) duration = 128; else duration = 32; @@ -314,10 +232,7 @@ static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) pll_comp_val = div_u64(pll_comp_val, multiplier); do_div(pll_comp_val, 10); - pout->plllock_cmp = (u32)pll_comp_val; - - pout->pll_txclk_en = 1; - pout->cmn_ldo_cntrl = 0x3c; + pconf->plllock_cmp = (u32)pll_comp_val; } static u32 pll_14nm_kvco_slop(u32 vrate) @@ -334,74 +249,66 @@ static u32 pll_14nm_kvco_slop(u32 vrate) return slop; } -static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll) +static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; - u64 vco_clk_rate = pll->vco_current_rate; - u64 fref = pll->vco_ref_clk_rate; + u64 vco_clk_rate = pconf->vco_current_rate; + u64 fref = VCO_REF_CLK_RATE; + u32 vco_measure_time = 5; + u32 kvco_measure_time = 5; u64 data; u32 cnt; - data = fref * pin->vco_measure_time; + data = fref * vco_measure_time; do_div(data, 1000000); data &= 0x03ff; /* 10 bits */ data -= 2; - pout->pll_vco_div_ref = data; + pconf->pll_vco_div_ref = data; data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */ - data *= pin->vco_measure_time; + data *= vco_measure_time; do_div(data, 10); - pout->pll_vco_count = data; + pconf->pll_vco_count = data; - data = fref * pin->kvco_measure_time; + data = fref * kvco_measure_time; do_div(data, 1000000); data &= 0x03ff; /* 10 bits */ data -= 1; - pout->pll_kvco_div_ref = data; + pconf->pll_kvco_div_ref = data; cnt = pll_14nm_kvco_slop(vco_clk_rate); cnt *= 2; cnt /= 100; - cnt *= pin->kvco_measure_time; - pout->pll_kvco_count = cnt; - - pout->pll_misc1 = 16; - pout->pll_resetsm_cntrl = 48; - pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3; - pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer; - pout->pll_kvco_code = 0; + cnt *= kvco_measure_time; + pconf->pll_kvco_count = cnt; } -static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) +static void pll_db_commit_ssc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; u8 data; - data = pin->ssc_adj_period; + data = pconf->ssc_adj_period; data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data); - data = (pin->ssc_adj_period >> 8); + data = (pconf->ssc_adj_period >> 8); data &= 0x03; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data); - data = pout->ssc_period; + data = pconf->ssc_period; data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data); - data = (pout->ssc_period >> 8); + data = (pconf->ssc_period >> 8); data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data); - data = pout->ssc_step_size; + data = pconf->ssc_step_size; data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data); - data = (pout->ssc_step_size >> 8); + data = (pconf->ssc_step_size >> 8); data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data); - data = (pin->ssc_center & 0x01); + data = (pconf->ssc_center & 0x01); data <<= 1; data |= 0x01; /* enable */ dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data); @@ -410,8 +317,7 @@ static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) } static void pll_db_commit_common(struct dsi_pll_14nm *pll, - struct dsi_pll_input *pin, - struct dsi_pll_output *pout) + struct dsi_pll_config *pconf) { void __iomem *base = pll->phy->pll_base; u8 data; @@ -420,55 +326,41 @@ static void pll_db_commit_common(struct dsi_pll_14nm *pll, data = 0; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data); - data = pout->pll_txclk_en; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, 1); - data = pout->pll_resetsm_cntrl; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data); - data = pout->pll_resetsm_cntrl2; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data); - data = pout->pll_resetsm_cntrl5; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, 48); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, 4 << 3); /* bandgap_timer */ + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, 5); /* pll_wakeup_timer */ - data = pout->pll_vco_div_ref & 0xff; + data = pconf->pll_vco_div_ref & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data); - data = (pout->pll_vco_div_ref >> 8) & 0x3; + data = (pconf->pll_vco_div_ref >> 8) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data); - data = pout->pll_kvco_div_ref & 0xff; + data = pconf->pll_kvco_div_ref & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data); - data = (pout->pll_kvco_div_ref >> 8) & 0x3; + data = (pconf->pll_kvco_div_ref >> 8) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data); - data = pout->pll_misc1; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, 16); - data = pin->pll_ie_trim; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, 4); - data = pin->pll_ip_trim; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, 4); - data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, 1 << 3 | 1); - data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, 0 << 3 | 0); - data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, 0 << 3 | 0); - data = pin->pll_icpmset << 3 | pin->pll_icpcset; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, 4 << 3 | 4); - data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, 1 << 4 | 11); - data = pin->pll_iptat_trim; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, 7); - data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, 1 << 4 | 2); } static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) @@ -489,8 +381,7 @@ static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) } static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, - struct dsi_pll_input *pin, - struct dsi_pll_output *pout) + struct dsi_pll_config *pconf) { void __iomem *base = pll->phy->pll_base; void __iomem *cmn_base = pll->phy->base; @@ -498,57 +389,64 @@ static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, DBG("DSI%d PLL", pll->phy->id); - data = pout->cmn_ldo_cntrl; - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data); + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, 0x3c); - pll_db_commit_common(pll, pin, pout); + pll_db_commit_common(pll, pconf); pll_14nm_software_reset(pll); - data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */ - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data); + /* Use the /2 path in Mux */ + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, 1); data = 0xff; /* data, clk, pll normal operation */ dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data); /* configure the frequency dependent pll registers */ - data = pout->dec_start; + data = pconf->dec_start; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data); - data = pout->div_frac_start & 0xff; + data = pconf->div_frac_start & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data); - data = (pout->div_frac_start >> 8) & 0xff; + data = (pconf->div_frac_start >> 8) & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data); - data = (pout->div_frac_start >> 16) & 0xf; + data = (pconf->div_frac_start >> 16) & 0xf; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data); - data = pout->plllock_cmp & 0xff; + data = pconf->plllock_cmp & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data); - data = (pout->plllock_cmp >> 8) & 0xff; + data = (pconf->plllock_cmp >> 8) & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data); - data = (pout->plllock_cmp >> 16) & 0x3; + data = (pconf->plllock_cmp >> 16) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data); - data = pin->plllock_cnt << 1 | pin->plllock_rng << 3; + data = pconf->plllock_cnt << 1 | 0 << 3; /* plllock_rng */ dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data); - data = pout->pll_vco_count & 0xff; + data = pconf->pll_vco_count & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data); - data = (pout->pll_vco_count >> 8) & 0xff; + data = (pconf->pll_vco_count >> 8) & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data); - data = pout->pll_kvco_count & 0xff; + data = pconf->pll_kvco_count & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data); - data = (pout->pll_kvco_count >> 8) & 0x3; + data = (pconf->pll_kvco_count >> 8) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data); - data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data); + /* + * High nibble configures the post divider internal to the VCO. It's + * fixed to divide by 1 for now. + * + * 0: divided by 1 + * 1: divided by 2 + * 2: divided by 4 + * 3: divided by 8 + */ + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, 0 << 4 | 3); - if (pin->ssc_en) - pll_db_commit_ssc(pll); + if (pconf->ssc_en) + pll_db_commit_ssc(pll, pconf); wmb(); /* make sure register committed */ } @@ -560,47 +458,32 @@ static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw); - struct dsi_pll_input *pin = &pll_14nm->in; - struct dsi_pll_output *pout = &pll_14nm->out; + struct dsi_pll_config conf; DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->phy->id, rate, parent_rate); - pll_14nm->vco_current_rate = rate; - pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - - dsi_pll_14nm_input_init(pll_14nm); - - /* - * This configures the post divider internal to the VCO. It's - * fixed to divide by 1 for now. - * - * tx_band = pll_postdiv. - * 0: divided by 1 - * 1: divided by 2 - * 2: divided by 4 - * 3: divided by 8 - */ - pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV; + dsi_pll_14nm_config_init(&conf); + conf.vco_current_rate = rate; - pll_14nm_dec_frac_calc(pll_14nm); + pll_14nm_dec_frac_calc(pll_14nm, &conf); - if (pin->ssc_en) - pll_14nm_ssc_calc(pll_14nm); + if (conf.ssc_en) + pll_14nm_ssc_calc(pll_14nm, &conf); - pll_14nm_calc_vco_count(pll_14nm); + pll_14nm_calc_vco_count(pll_14nm, &conf); /* commit the slave DSI PLL registers if we're master. Note that we * don't lock the slave PLL. We just ensure that the PLL/PHY registers * of the master and slave are identical */ - if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { + if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) { struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; - pll_db_commit_14nm(pll_14nm_slave, pin, pout); + pll_db_commit_14nm(pll_14nm_slave, &conf); } - pll_db_commit_14nm(pll_14nm, pin, pout); + pll_db_commit_14nm(pll_14nm, &conf); return 0; } @@ -777,7 +660,7 @@ static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate, /* If we're master in dual DSI mode, then the slave PLL's post-dividers * follow the master's post dividers */ - if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { + if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) { struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; void __iomem *slave_base = pll_14nm_slave->phy->base; @@ -841,7 +724,7 @@ static int dsi_14nm_restore_state(struct msm_dsi_phy *phy) dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data); /* also restore post-dividers for slave DSI PLL */ - if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { + if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) { struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; void __iomem *slave_base = pll_14nm_slave->phy->base; @@ -877,7 +760,6 @@ static int dsi_14nm_set_usecase(struct msm_dsi_phy *phy) if (bandgap) dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP, bandgap); - pll_14nm->uc = phy->usecase; return 0; } diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c index ae42c3f4ea66..98dc6c3083fc 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c @@ -36,40 +36,21 @@ */ #define VCO_REF_CLK_RATE 19200000 - -struct dsi_pll_regs { - u32 pll_prop_gain_rate; - u32 pll_lockdet_rate; - u32 decimal_div_start; - u32 frac_div_start_low; - u32 frac_div_start_mid; - u32 frac_div_start_high; - u32 pll_clock_inverters; - u32 ssc_stepsize_low; - u32 ssc_stepsize_high; - u32 ssc_div_per_low; - u32 ssc_div_per_high; - u32 ssc_adjper_low; - u32 ssc_adjper_high; - u32 ssc_control; -}; +#define FRAC_BITS 18 struct dsi_pll_config { - u32 ref_freq; - bool div_override; - u32 output_div; - bool ignore_frac; - bool disable_prescaler; bool enable_ssc; bool ssc_center; - u32 dec_bits; - u32 frac_bits; - u32 lock_timer; u32 ssc_freq; u32 ssc_offset; u32 ssc_adj_per; - u32 thresh_cycles; - u32 refclk_cycles; + + /* out */ + u32 decimal_div_start; + u32 frac_div_start; + u32 pll_clock_inverters; + u32 ssc_stepsize; + u32 ssc_div_per; }; struct pll_7nm_cached_state { @@ -85,15 +66,11 @@ struct dsi_pll_7nm { struct msm_dsi_phy *phy; - u64 vco_ref_clk_rate; u64 vco_current_rate; /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */ spinlock_t postdiv_lock; - struct dsi_pll_config pll_configuration; - struct dsi_pll_regs reg_setup; - struct pll_7nm_cached_state cached_state; struct dsi_pll_7nm *slave; @@ -107,35 +84,20 @@ struct dsi_pll_7nm { */ static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX]; -static void dsi_pll_setup_config(struct dsi_pll_7nm *pll) +static void dsi_pll_setup_config(struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - - config->ref_freq = pll->vco_ref_clk_rate; - config->output_div = 1; - config->dec_bits = 8; - config->frac_bits = 18; - config->lock_timer = 64; config->ssc_freq = 31500; config->ssc_offset = 4800; config->ssc_adj_per = 2; - config->thresh_cycles = 32; - config->refclk_cycles = 256; - - config->div_override = false; - config->ignore_frac = false; - config->disable_prescaler = false; /* TODO: ssc enable */ config->enable_ssc = false; config->ssc_center = 0; } -static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll) +static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u64 fref = pll->vco_ref_clk_rate; + u64 fref = VCO_REF_CLK_RATE; u64 pll_freq; u64 divider; u64 dec, dec_multiple; @@ -144,42 +106,34 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll) pll_freq = pll->vco_current_rate; - if (config->disable_prescaler) - divider = fref; - else - divider = fref * 2; + divider = fref * 2; - multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; dec_multiple = div_u64(pll_freq * multiplier, divider); div_u64_rem(dec_multiple, multiplier, &frac); dec = div_u64(dec_multiple, multiplier); if (pll->phy->cfg->type != MSM_DSI_PHY_7NM_V4_1) - regs->pll_clock_inverters = 0x28; + config->pll_clock_inverters = 0x28; else if (pll_freq <= 1000000000ULL) - regs->pll_clock_inverters = 0xa0; + config->pll_clock_inverters = 0xa0; else if (pll_freq <= 2500000000ULL) - regs->pll_clock_inverters = 0x20; + config->pll_clock_inverters = 0x20; else if (pll_freq <= 3020000000ULL) - regs->pll_clock_inverters = 0x00; + config->pll_clock_inverters = 0x00; else - regs->pll_clock_inverters = 0x40; + config->pll_clock_inverters = 0x40; - regs->pll_lockdet_rate = config->lock_timer; - regs->decimal_div_start = dec; - regs->frac_div_start_low = (frac & 0xff); - regs->frac_div_start_mid = (frac & 0xff00) >> 8; - regs->frac_div_start_high = (frac & 0x30000) >> 16; + config->decimal_div_start = dec; + config->frac_div_start = frac; } #define SSC_CENTER BIT(0) #define SSC_EN BIT(1) -static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) +static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; u32 ssc_per; u32 ssc_mod; u64 ssc_step_size; @@ -190,58 +144,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) return; } - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 - 1; ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); ssc_per -= ssc_mod; - frac = regs->frac_div_start_low | - (regs->frac_div_start_mid << 8) | - (regs->frac_div_start_high << 16); - ssc_step_size = regs->decimal_div_start; - ssc_step_size *= (1 << config->frac_bits); + frac = config->frac_div_start; + ssc_step_size = config->decimal_div_start; + ssc_step_size *= (1 << FRAC_BITS); ssc_step_size += frac; ssc_step_size *= config->ssc_offset; ssc_step_size *= (config->ssc_adj_per + 1); ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); - regs->ssc_div_per_low = ssc_per & 0xFF; - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; - - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; + config->ssc_div_per = ssc_per; + config->ssc_stepsize = ssc_step_size; pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", - regs->decimal_div_start, frac, config->frac_bits); + config->decimal_div_start, frac, FRAC_BITS); pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", ssc_per, (u32)ssc_step_size, config->ssc_adj_per); } -static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll) +static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *regs = &pll->reg_setup; - if (pll->pll_configuration.enable_ssc) { + if (config->enable_ssc) { pr_debug("SSC is enabled\n"); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1, - regs->ssc_stepsize_low); + config->ssc_stepsize & 0xff); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, - regs->ssc_stepsize_high); + config->ssc_stepsize >> 8); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1, - regs->ssc_div_per_low); + config->ssc_div_per & 0xff); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1, - regs->ssc_div_per_high); + config->ssc_div_per >> 8); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1, - regs->ssc_adjper_low); + config->ssc_adj_per & 0xff); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1, - regs->ssc_adjper_high); + config->ssc_adj_per >> 8); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL, - SSC_EN | regs->ssc_control); + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); } } @@ -293,44 +238,46 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll) } } -static void dsi_pll_commit(struct dsi_pll_7nm *pll) +static void dsi_pll_commit(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *reg = &pll->reg_setup; dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, reg->decimal_div_start); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, config->decimal_div_start); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, + config->frac_div_start & 0xff); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, + (config->frac_div_start & 0xff00) >> 8); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, + (config->frac_div_start & 0x30000) >> 16); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */ - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, config->pll_clock_inverters); } static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); + struct dsi_pll_config config; DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->phy->id, rate, parent_rate); pll_7nm->vco_current_rate = rate; - pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - dsi_pll_setup_config(pll_7nm); + dsi_pll_setup_config(&config); - dsi_pll_calc_dec_frac(pll_7nm); + dsi_pll_calc_dec_frac(pll_7nm, &config); - dsi_pll_calc_ssc(pll_7nm); + dsi_pll_calc_ssc(pll_7nm, &config); - dsi_pll_commit(pll_7nm); + dsi_pll_commit(pll_7nm, &config); dsi_pll_config_hzindep_reg(pll_7nm); - dsi_pll_ssc_commit(pll_7nm); + dsi_pll_ssc_commit(pll_7nm, &config); /* flush, ensure all register writes are done*/ wmb(); @@ -484,7 +431,7 @@ static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, { struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); void __iomem *base = pll_7nm->phy->pll_base; - u64 ref_clk = pll_7nm->vco_ref_clk_rate; + u64 ref_clk = VCO_REF_CLK_RATE; u64 vco_rate = 0x0; u64 multiplier; u32 frac; @@ -587,7 +534,7 @@ static int dsi_7nm_restore_state(struct msm_dsi_phy *phy) val |= cached->pll_mux; dsi_phy_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val); - ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate); + ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, pll_7nm->vco_current_rate, VCO_REF_CLK_RATE); if (ret) { DRM_DEV_ERROR(&pll_7nm->phy->pdev->dev, "restore vco rate failed. ret=%d\n", ret);