| Message ID | 168565502116.1098279.131831312990693128.stgit@djiang5-mobl3 |
|---|---|
| Headers | show |
| Series | acpi: Add CDAT parsing support to ACPI tables code | expand |
On Thu, Jun 1, 2023 at 11:31 PM Dave Jiang <dave.jiang@intel.com> wrote: > > v3: > - Move common code to lib/fw_table.c > v2: > - Split out with CONFIG_ACPI_TABLES_LIB to be independent > - Fixed 0-day issues > - Change CDAT releveant names to prefix with cdat/CDAT instead of > acpi/ACPI. (Jonathan) > - Make table_header a union with cdat table header instead of > 'acpi_table_header'. (Jonathan) > - Removed ACPI_SIG_CDAT, already defined. > > Hi Rafael, > Please consider ack these patches. Dan can take these through the CXL tree. After > attempting to rename the cxl_ prefixes of functions and non ACPICA data structures > to something more common, it seems that significant amount of ACPI code would be > touched for the rename. For this series I left it alone in order to have the minimal > changes to ACPI code. > > I've broken out the "cxl: Add support for QTG ID retrieval for CXL subsystem" [1] > series in order to make it more manageable. Here's the first part of the ACPI > changes. These changes are added to allow reuse of ACPI tables code to parse > the CDAT tables. While CDAT is not part of ACPI, the table structures are similar > to ACPI layouts that the code can be reused with some small modifications. > > However, in order to be properly utilized by CXL users, the tables code needs > to be refactored out to be independent of ACPI. For example, a PPC BE host may > have CXL and does not have ACPI support. But it will have CDAT to read from > devices and switches. I have created CONFIG_ACPI_TABLES_LIB in order to allow > the common code to be independent. 0-day seems to be happy now for all the > different configs and archs. > > 1/4: Split out the common code from drivers/acpi/tables.c to lib/fw_table.c > 2/4: Add CDAT support > 3,4/4: These two are minor patches that has ACPICA impact. Has been merged into > the ACPICA git repo [3]. > > The whole series is at [2] for convenience. > > [1]: https://lore.kernel.org/linux-cxl/168193556660.1178687.15477509915255912089.stgit@djiang5-mobl3/T/#t > [2]: https://git.kernel.org/pub/scm/linux/kernel/git/djiang/linux.git/log/?h=cxl-qtg > [3]: https://github.com/acpica/acpica/pull/874 > > --- > > Dave Jiang (4): > acpi: Move common tables helper functions to common lib > lib/firmware_table: tables: Add CDAT table parsing support > acpi: fix misnamed define for CDAT DSMAS > acpi: Add defines for CDAT SSLBIS > > > drivers/acpi/Kconfig | 1 + > drivers/acpi/tables.c | 178 +---------------------------- > include/acpi/actbl1.h | 5 +- > include/linux/acpi.h | 22 +--- > include/linux/fw_table.h | 52 +++++++++ > lib/Kconfig | 3 + > lib/Makefile | 2 + > lib/fw_table.c | 236 +++++++++++++++++++++++++++++++++++++++ > 8 files changed, 302 insertions(+), 197 deletions(-) > create mode 100644 include/linux/fw_table.h > create mode 100644 lib/fw_table.c > > -- I think that this series can go in via the CXL tree and I'm expecting ACPICA to make a new release including the counterparts of patches [3-4/4] shortly. Please feel free to add Acled-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> to the series. Thanks!
On 6/4/23 09:09, Rafael J. Wysocki wrote: > On Thu, Jun 1, 2023 at 11:31 PM Dave Jiang <dave.jiang@intel.com> wrote: >> v3: >> - Move common code to lib/fw_table.c >> v2: >> - Split out with CONFIG_ACPI_TABLES_LIB to be independent >> - Fixed 0-day issues >> - Change CDAT releveant names to prefix with cdat/CDAT instead of >> acpi/ACPI. (Jonathan) >> - Make table_header a union with cdat table header instead of >> 'acpi_table_header'. (Jonathan) >> - Removed ACPI_SIG_CDAT, already defined. >> >> Hi Rafael, >> Please consider ack these patches. Dan can take these through the CXL tree. After >> attempting to rename the cxl_ prefixes of functions and non ACPICA data structures >> to something more common, it seems that significant amount of ACPI code would be >> touched for the rename. For this series I left it alone in order to have the minimal >> changes to ACPI code. >> >> I've broken out the "cxl: Add support for QTG ID retrieval for CXL subsystem" [1] >> series in order to make it more manageable. Here's the first part of the ACPI >> changes. These changes are added to allow reuse of ACPI tables code to parse >> the CDAT tables. While CDAT is not part of ACPI, the table structures are similar >> to ACPI layouts that the code can be reused with some small modifications. >> >> However, in order to be properly utilized by CXL users, the tables code needs >> to be refactored out to be independent of ACPI. For example, a PPC BE host may >> have CXL and does not have ACPI support. But it will have CDAT to read from >> devices and switches. I have created CONFIG_ACPI_TABLES_LIB in order to allow >> the common code to be independent. 0-day seems to be happy now for all the >> different configs and archs. >> >> 1/4: Split out the common code from drivers/acpi/tables.c to lib/fw_table.c >> 2/4: Add CDAT support >> 3,4/4: These two are minor patches that has ACPICA impact. Has been merged into >> the ACPICA git repo [3]. >> >> The whole series is at [2] for convenience. >> >> [1]: https://lore.kernel.org/linux-cxl/168193556660.1178687.15477509915255912089.stgit@djiang5-mobl3/T/#t >> [2]: https://git.kernel.org/pub/scm/linux/kernel/git/djiang/linux.git/log/?h=cxl-qtg >> [3]: https://github.com/acpica/acpica/pull/874 >> >> --- >> >> Dave Jiang (4): >> acpi: Move common tables helper functions to common lib >> lib/firmware_table: tables: Add CDAT table parsing support >> acpi: fix misnamed define for CDAT DSMAS >> acpi: Add defines for CDAT SSLBIS >> >> >> drivers/acpi/Kconfig | 1 + >> drivers/acpi/tables.c | 178 +---------------------------- >> include/acpi/actbl1.h | 5 +- >> include/linux/acpi.h | 22 +--- >> include/linux/fw_table.h | 52 +++++++++ >> lib/Kconfig | 3 + >> lib/Makefile | 2 + >> lib/fw_table.c | 236 +++++++++++++++++++++++++++++++++++++++ >> 8 files changed, 302 insertions(+), 197 deletions(-) >> create mode 100644 include/linux/fw_table.h >> create mode 100644 lib/fw_table.c >> >> -- > I think that this series can go in via the CXL tree and I'm expecting > ACPICA to make a new release including the counterparts of patches > [3-4/4] shortly. > > Please feel free to add > > Acled-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > to the series. Thank you Rafael! > Thanks!
v3: - Move common code to lib/fw_table.c v2: - Split out with CONFIG_ACPI_TABLES_LIB to be independent - Fixed 0-day issues - Change CDAT releveant names to prefix with cdat/CDAT instead of acpi/ACPI. (Jonathan) - Make table_header a union with cdat table header instead of 'acpi_table_header'. (Jonathan) - Removed ACPI_SIG_CDAT, already defined. Hi Rafael, Please consider ack these patches. Dan can take these through the CXL tree. After attempting to rename the cxl_ prefixes of functions and non ACPICA data structures to something more common, it seems that significant amount of ACPI code would be touched for the rename. For this series I left it alone in order to have the minimal changes to ACPI code. I've broken out the "cxl: Add support for QTG ID retrieval for CXL subsystem" [1] series in order to make it more manageable. Here's the first part of the ACPI changes. These changes are added to allow reuse of ACPI tables code to parse the CDAT tables. While CDAT is not part of ACPI, the table structures are similar to ACPI layouts that the code can be reused with some small modifications. However, in order to be properly utilized by CXL users, the tables code needs to be refactored out to be independent of ACPI. For example, a PPC BE host may have CXL and does not have ACPI support. But it will have CDAT to read from devices and switches. I have created CONFIG_ACPI_TABLES_LIB in order to allow the common code to be independent. 0-day seems to be happy now for all the different configs and archs. 1/4: Split out the common code from drivers/acpi/tables.c to lib/fw_table.c 2/4: Add CDAT support 3,4/4: These two are minor patches that has ACPICA impact. Has been merged into the ACPICA git repo [3]. The whole series is at [2] for convenience. [1]: https://lore.kernel.org/linux-cxl/168193556660.1178687.15477509915255912089.stgit@djiang5-mobl3/T/#t [2]: https://git.kernel.org/pub/scm/linux/kernel/git/djiang/linux.git/log/?h=cxl-qtg [3]: https://github.com/acpica/acpica/pull/874 --- Dave Jiang (4): acpi: Move common tables helper functions to common lib lib/firmware_table: tables: Add CDAT table parsing support acpi: fix misnamed define for CDAT DSMAS acpi: Add defines for CDAT SSLBIS drivers/acpi/Kconfig | 1 + drivers/acpi/tables.c | 178 +---------------------------- include/acpi/actbl1.h | 5 +- include/linux/acpi.h | 22 +--- include/linux/fw_table.h | 52 +++++++++ lib/Kconfig | 3 + lib/Makefile | 2 + lib/fw_table.c | 236 +++++++++++++++++++++++++++++++++++++++ 8 files changed, 302 insertions(+), 197 deletions(-) create mode 100644 include/linux/fw_table.h create mode 100644 lib/fw_table.c --