mbox series

[v6,0/2] Read _SUB from ACPI to be able to identify firmware

Message ID 20220707151037.3901050-1-sbinding@opensource.cirrus.com
Headers show
Series Read _SUB from ACPI to be able to identify firmware | expand

Message

Stefan Binding July 7, 2022, 3:10 p.m. UTC 
CS35L41 has a DSP which is able to run firmware, as well as a tuning file.
Different systems may want to use different firmwares and tuning files, and
some firmwares/tunings may not be compatible with other systems.
To allow a system to select the correct fimware/tuning, we can read an _SUB
from the ACPI. This _SUB can then be used to uniquely identify the system
in the firmware/tuning file name.

Add a helper function which reads the _SUB, so this can be used by other
parts in the future.
Add support inside the CS35L41 ASoC driver to read this _SUB, and save it
appropriately.

Changes since v5:
- Clean up return codes
- Refactor length calculation
- Allow fallback to existing behaviour when bad ACPI is detected

Changes since v4:
- Rename function

Changes since v3:
- Fix 32 bit format string warning

Changes since v2:
- Fix error in function prototype

Changes since v1:
- Add length validation for SSID String
- Rename API
- Allocate memory inside API
- Use ACPI_HANDLE macro instead of ACPI_COMPANION
- Improve error handling

Stefan Binding (2):
  ACPI: utils: Add api to read _SUB from ACPI
  ASoC: cs35l41: Read System Name from ACPI _SUB to identify firmware

 drivers/acpi/utils.c       | 38 ++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h       |  6 ++++++
 sound/soc/codecs/cs35l41.c | 30 ++++++++++++++++++++++++++++++
 3 files changed, 74 insertions(+)