From patchwork Mon Jan 30 19:04:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 651043 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 232D5C54EAA for ; Mon, 30 Jan 2023 19:07:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238100AbjA3THe (ORCPT ); Mon, 30 Jan 2023 14:07:34 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38234 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238083AbjA3THd (ORCPT ); Mon, 30 Jan 2023 14:07:33 -0500 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9695B38666; Mon, 30 Jan 2023 11:07:31 -0800 (PST) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.1.0) id 38ad90d73f134747; Mon, 30 Jan 2023 20:07:29 +0100 Received: from kreacher.localnet (unknown [213.134.169.112]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id 016D22528287; Mon, 30 Jan 2023 20:07:28 +0100 (CET) From: "Rafael J. Wysocki" To: Linux PM Cc: Zhang Rui , Srinivas Pandruvada , Linux ACPI , LKML , David Box Subject: [PATCH v1 6/8] thermal: intel: intel_pch: Fold suspend and resume routines into their callers Date: Mon, 30 Jan 2023 20:04:05 +0100 Message-ID: <1817848.atdPhlSkOF@kreacher> In-Reply-To: <1751684.VLH7GnMWUR@kreacher> References: <1751684.VLH7GnMWUR@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.169.112 X-CLIENT-HOSTNAME: 213.134.169.112 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvhedrudefvddguddvfecutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfjqffogffrnfdpggftiffpkfenuceurghilhhouhhtmecuudehtdenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkjghfggfgtgesthfuredttddtjeenucfhrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqeenucggtffrrghtthgvrhhnpedvffeuiedtgfdvtddugeeujedtffetteegfeekffdvfedttddtuefhgeefvdejhfenucfkphepvddufedrudefgedrudeiledrudduvdenucevlhhushhtvghrufhiiigvpedtnecurfgrrhgrmhepihhnvghtpedvudefrddufeegrdduieelrdduuddvpdhhvghlohepkhhrvggrtghhvghrrdhlohgtrghlnhgvthdpmhgrihhlfhhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqpdhnsggprhgtphhtthhopeeipdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprhhuihdriihhrghnghesihhnthgvlhdrtghomhdprhgtphhtthhopehsrhhinhhivhgrshdrphgrnhgurhhuvhgruggrsehlihhnuhigrdhinhhtvghlrdgtohhmpdhrtghpthhtoheplhhinhhugidqrggtphhisehvghgvrhdrkhgvrhhnvghlrdho rhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepuggrvhhiugdrvgdrsghogieslhhinhhugidrihhnthgvlhdrtghomh X-DCC--Metrics: v370.home.net.pl 1024; Body=6 Fuz1=6 Fuz2=6 Precedence: bulk List-ID: X-Mailing-List: linux-acpi@vger.kernel.org From: Rafael J. Wysocki Fold pch_suspend() and pch_resume(), that each have only one caller, into their respective callers to make the code somewhat easier to follow. No intentional functional impact. Signed-off-by: Rafael J. Wysocki --- drivers/thermal/intel/intel_pch_thermal.c | 155 +++++++++++++----------------- 1 file changed, 71 insertions(+), 84 deletions(-) Index: linux-pm/drivers/thermal/intel/intel_pch_thermal.c =================================================================== --- linux-pm.orig/drivers/thermal/intel/intel_pch_thermal.c +++ linux-pm/drivers/thermal/intel/intel_pch_thermal.c @@ -117,88 +117,6 @@ static int pch_wpt_add_acpi_psv_trip(str } #endif -/* Cool the PCH when it's overheat in .suspend_noirq phase */ -static int pch_suspend(struct pch_thermal_device *ptd) -{ - u8 tsel; - int pch_delay_cnt = 0; - u16 pch_thr_temp, pch_cur_temp; - - /* Shutdown the thermal sensor if it is not enabled by BIOS */ - if (!ptd->bios_enabled) { - tsel = readb(ptd->hw_base + WPT_TSEL); - writeb(tsel & 0xFE, ptd->hw_base + WPT_TSEL); - return 0; - } - - /* Do not check temperature if it is not s2idle */ - if (pm_suspend_via_firmware()) - return 0; - - /* Get the PCH temperature threshold value */ - pch_thr_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TSPM)); - - /* Get the PCH current temperature value */ - pch_cur_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP)); - - /* - * If current PCH temperature is higher than configured PCH threshold - * value, run some delay loop with sleep to let the current temperature - * go down below the threshold value which helps to allow system enter - * lower power S0ix suspend state. Even after delay loop if PCH current - * temperature stays above threshold, notify the warning message - * which helps to indentify the reason why S0ix entry was rejected. - */ - while (pch_delay_cnt < delay_cnt) { - if (pch_cur_temp < pch_thr_temp) - break; - - if (pm_wakeup_pending()) { - dev_warn(&ptd->pdev->dev, "Wakeup event detected, abort cooling\n"); - return 0; - } - - pch_delay_cnt++; - dev_dbg(&ptd->pdev->dev, - "CPU-PCH current temp [%dC] higher than the threshold temp [%dC], sleep %d times for %d ms duration\n", - pch_cur_temp, pch_thr_temp, pch_delay_cnt, delay_timeout); - msleep(delay_timeout); - /* Read the PCH current temperature for next cycle. */ - pch_cur_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP)); - } - - if (pch_cur_temp >= pch_thr_temp) - dev_warn(&ptd->pdev->dev, - "CPU-PCH is hot [%dC] after %d ms delay. S0ix might fail\n", - pch_cur_temp, pch_delay_cnt * delay_timeout); - else { - if (pch_delay_cnt) - dev_info(&ptd->pdev->dev, - "CPU-PCH is cool [%dC] after %d ms delay\n", - pch_cur_temp, pch_delay_cnt * delay_timeout); - else - dev_info(&ptd->pdev->dev, - "CPU-PCH is cool [%dC]\n", - pch_cur_temp); - } - - return 0; -} - -static int pch_resume(struct pch_thermal_device *ptd) -{ - u8 tsel; - - if (ptd->bios_enabled) - return 0; - - tsel = readb(ptd->hw_base + WPT_TSEL); - - writeb(tsel | WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL); - - return 0; -} - static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp) { struct pch_thermal_device *ptd = tzd->devdata; @@ -372,15 +290,84 @@ static void intel_pch_thermal_remove(str static int intel_pch_thermal_suspend_noirq(struct device *device) { struct pch_thermal_device *ptd = dev_get_drvdata(device); + u16 pch_thr_temp, pch_cur_temp; + int pch_delay_cnt = 0; + u8 tsel; + + /* Shutdown the thermal sensor if it is not enabled by BIOS */ + if (!ptd->bios_enabled) { + tsel = readb(ptd->hw_base + WPT_TSEL); + writeb(tsel & 0xFE, ptd->hw_base + WPT_TSEL); + return 0; + } + + /* Do not check temperature if it is not s2idle */ + if (pm_suspend_via_firmware()) + return 0; + + /* Get the PCH temperature threshold value */ + pch_thr_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TSPM)); + + /* Get the PCH current temperature value */ + pch_cur_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP)); - return pch_suspend(ptd); + /* + * If current PCH temperature is higher than configured PCH threshold + * value, run some delay loop with sleep to let the current temperature + * go down below the threshold value which helps to allow system enter + * lower power S0ix suspend state. Even after delay loop if PCH current + * temperature stays above threshold, notify the warning message + * which helps to indentify the reason why S0ix entry was rejected. + */ + while (pch_delay_cnt < delay_cnt) { + if (pch_cur_temp < pch_thr_temp) + break; + + if (pm_wakeup_pending()) { + dev_warn(&ptd->pdev->dev, "Wakeup event detected, abort cooling\n"); + return 0; + } + + pch_delay_cnt++; + dev_dbg(&ptd->pdev->dev, + "CPU-PCH current temp [%dC] higher than the threshold temp [%dC], sleep %d times for %d ms duration\n", + pch_cur_temp, pch_thr_temp, pch_delay_cnt, delay_timeout); + msleep(delay_timeout); + /* Read the PCH current temperature for next cycle. */ + pch_cur_temp = GET_PCH_TEMP(WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP)); + } + + if (pch_cur_temp >= pch_thr_temp) + dev_warn(&ptd->pdev->dev, + "CPU-PCH is hot [%dC] after %d ms delay. S0ix might fail\n", + pch_cur_temp, pch_delay_cnt * delay_timeout); + else { + if (pch_delay_cnt) + dev_info(&ptd->pdev->dev, + "CPU-PCH is cool [%dC] after %d ms delay\n", + pch_cur_temp, pch_delay_cnt * delay_timeout); + else + dev_info(&ptd->pdev->dev, + "CPU-PCH is cool [%dC]\n", + pch_cur_temp); + } + + return 0; } static int intel_pch_thermal_resume(struct device *device) { struct pch_thermal_device *ptd = dev_get_drvdata(device); + u8 tsel; - return pch_resume(ptd); + if (ptd->bios_enabled) + return 0; + + tsel = readb(ptd->hw_base + WPT_TSEL); + + writeb(tsel | WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL); + + return 0; } static const struct pci_device_id intel_pch_thermal_id[] = {