diff mbox series

[v4,3/9] spi: Support selection of the index of the ACPI Spi Resource before alloc

Message ID 20220120134326.5295-4-sbinding@opensource.cirrus.com
State Superseded
Headers show
Series Support Spi in i2c-multi-instantiate driver | expand

Commit Message

Stefan Binding Jan. 20, 2022, 1:43 p.m. UTC
If a node contains more than one Spi Resources, it may be necessary to
use an index to select which one you want to allocate a spi device for.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
 drivers/spi/spi.c       | 56 +++++++++++++++++++++++++++++++++++------
 include/linux/spi/spi.h |  6 +++--
 2 files changed, 52 insertions(+), 10 deletions(-)

Comments

Hans de Goede Jan. 20, 2022, 3:03 p.m. UTC | #1
Hi Stefan,

On 1/20/22 14:43, Stefan Binding wrote:
> If a node contains more than one Spi Resources, it may be necessary to
> use an index to select which one you want to allocate a spi device for.
> 
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> ---
>  drivers/spi/spi.c       | 56 +++++++++++++++++++++++++++++++++++------
>  include/linux/spi/spi.h |  6 +++--
>  2 files changed, 52 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index 13f4701f0694..898cc9931490 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -2320,6 +2320,9 @@ struct acpi_spi_lookup {
>  	int			irq;
>  	u8			bits_per_word;
>  	u8			chip_select;
> +	int			n;
> +	int			index;
> +	int			irq_index;
>  };
>  
>  static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
> @@ -2351,6 +2354,8 @@ static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
>  		lookup->mode |= SPI_CPHA;
>  }
>  
> +static struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev);
> +
>  static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
>  {
>  	struct acpi_spi_lookup *lookup = data;
> @@ -2364,14 +2369,35 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
>  		sb = &ares->data.spi_serial_bus;
>  		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
>  
> +			if (lookup->index != -1 && lookup->n++ != lookup->index)
> +				return 1;
> +
> +			if (lookup->index == -1 && !ctlr)
> +				return -ENODEV;
> +
>  			status = acpi_get_handle(NULL,
>  						 sb->resource_source.string_ptr,
>  						 &parent_handle);
>  
> -			if (ACPI_FAILURE(status) ||
> -			    ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
> +			if (ACPI_FAILURE(status))
>  				return -ENODEV;
>  
> +			if (ctlr) {
> +				if (ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
> +					return -ENODEV;
> +			} else {
> +				struct acpi_device *adev;
> +
> +				if (acpi_bus_get_device(parent_handle, &adev))
> +					return -ENODEV;
> +
> +				ctlr = acpi_spi_find_controller_by_adev(adev);
> +				if (!ctlr)
> +					return -ENODEV;
> +
> +				lookup->ctlr = ctlr;
> +			}
> +
>  			/*
>  			 * ACPI DeviceSelection numbering is handled by the
>  			 * host controller driver in Windows and can vary

All of the above looks good to me.

> @@ -2402,7 +2428,7 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
>  	} else if (lookup->irq < 0) {
>  		struct resource r;
>  
> -		if (acpi_dev_resource_interrupt(ares, 0, &r))
> +		if (acpi_dev_resource_interrupt(ares, lookup->irq_index, &r))
>  			lookup->irq = r.start;
>  	}
>  

I think that this does not do what you want it to do. Quoting drivers/acpi/resource.c:

bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
                                 struct resource *res)
{
        struct acpi_resource_irq *irq;
        struct acpi_resource_extended_irq *ext_irq;

        switch (ares->type) {
        case ACPI_RESOURCE_TYPE_IRQ:
                /*
                 * Per spec, only one interrupt per descriptor is allowed in
                 * _CRS, but some firmware violates this, so parse them all.
                 */
                irq = &ares->data.irq;
                if (index >= irq->interrupt_count) {
                        irqresource_disabled(res, 0);
                        return false;
                }

So now you are actually adding an index into a single:

                    Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
                    {
                        0x00000008,
                    }

ACPI Resource, which typically (as shown here) only has 1 interrupt, I guess
what you want is the nth resource of type ACPI_RESOURCE_TYPE_IRQ or
ACPI_RESOURCE_TYPE_EXTENDED_IRQ.

So to make this work you should combine this with a separate irq_n
for irq_index, increment that on acpi_dev_resource_interrupt() success
and then only set lookup->irq = r.start; when irq_n == irq_index.

But since the bus-multi-inst code already has its own irq getting code
this is not really necessary, I would just drop the new irq_index field;
and then also drop the "if (spi_dev->irq < 0)" condition for calling
bmi_get_irq() in "[PATCH v4 7/9] platform/x86: bus-multi-instantiate:
Add SPI support"

Note that for the CS35L41 that if is always true already since
that is using a GpioInt resource and acpi_dev_resource_interrupt()
does not support those.

TL;DR: please drop the new irq_index fiels and just leave the
related bits as is.


> @@ -2414,14 +2440,22 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
>   * acpi_spi_device_alloc - Allocate a spi device, and fill it in with ACPI information
>   * @ctlr: controller to which the spi device belongs
>   * @adev: ACPI Device for the spi device
> + * @index: Index of the spi resource inside the ACPI Node
> + * @irq_index: Index of the GPIO resource for the IRQ inside the ACPI Node
>   *
>   * This should be used to allocate a new spi device from and ACPI Node.
>   * The caller is responsible for calling spi_add_device to register the spi device.
>   *
> + * If ctlr is set to NULL, the Controller for the spi device will be looked up
> + * using the resource.
> + * If index is set to -1, index is not used.
> + * Note: If index is -1, ctlr must be set.
> + *
>   * Return: a pointer to the new device, or ERR_PTR on error.
>   */
>  struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
> -					 struct acpi_device *adev)
> +					 struct acpi_device *adev,
> +					 int index, int irq_index)
>  {
>  	acpi_handle parent_handle = NULL;
>  	struct list_head resource_list;
> @@ -2429,8 +2463,14 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
>  	struct spi_device *spi;
>  	int ret;
>  
> +	if (!ctlr && index == -1)
> +		return ERR_PTR(-EINVAL);
> +
>  	lookup.ctlr		= ctlr;
>  	lookup.irq		= -1;
> +	lookup.index		= index;
> +	lookup.n		= 0;
> +	lookup.irq_index	= irq_index;
>  
>  	INIT_LIST_HEAD(&resource_list);
>  	ret = acpi_dev_get_resources(adev, &resource_list,
> @@ -2443,7 +2483,7 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
>  
>  	if (!lookup.max_speed_hz &&
>  	    ACPI_SUCCESS(acpi_get_parent(adev->handle, &parent_handle)) &&
> -	    ACPI_HANDLE(ctlr->dev.parent) == parent_handle) {
> +	    ACPI_HANDLE(lookup.ctlr->dev.parent) == parent_handle) {
>  		/* Apple does not use _CRS but nested devices for SPI slaves */
>  		acpi_spi_parse_apple_properties(adev, &lookup);
>  	}
> @@ -2451,9 +2491,9 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
>  	if (!lookup.max_speed_hz)
>  		return ERR_PTR(-ENODEV);
>  
> -	spi = spi_alloc_device(ctlr);
> +	spi = spi_alloc_device(lookup.ctlr);
>  	if (!spi) {
> -		dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
> +		dev_err(&lookup.ctlr->dev, "failed to allocate SPI device for %s\n",
>  			dev_name(&adev->dev));
>  		return ERR_PTR(-ENOMEM);
>  	}
> @@ -2478,7 +2518,7 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
>  	    acpi_device_enumerated(adev))
>  		return AE_OK;
>  
> -	spi = acpi_spi_device_alloc(ctlr, adev);
> +	spi = acpi_spi_device_alloc(ctlr, adev, -1, 0);
>  	if (IS_ERR(spi)) {
>  		if (PTR_ERR(spi) == -ENOMEM)
>  			return AE_NO_MEMORY;
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index 200725692b93..1a34fd0f6ca2 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -762,10 +762,12 @@ extern void spi_unregister_controller(struct spi_controller *ctlr);
>  
>  #if IS_ENABLED(CONFIG_ACPI)
>  extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
> -						struct acpi_device *adev);
> +						struct acpi_device *adev,
> +						int index, int irq_index);
>  #else
>  static inline struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
> -						       struct acpi_device *adev);
> +						       struct acpi_device *adev,
> +						       int index, int irq_index);
>  {
>  	return ERR_PTR(-EOPNOTSUPP);
>  }
> 


Like with my review of patch 2/9, I don't think we need stubs here.

Regards,

Hans
diff mbox series

Patch

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 13f4701f0694..898cc9931490 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2320,6 +2320,9 @@  struct acpi_spi_lookup {
 	int			irq;
 	u8			bits_per_word;
 	u8			chip_select;
+	int			n;
+	int			index;
+	int			irq_index;
 };
 
 static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
@@ -2351,6 +2354,8 @@  static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
 		lookup->mode |= SPI_CPHA;
 }
 
+static struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev);
+
 static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 {
 	struct acpi_spi_lookup *lookup = data;
@@ -2364,14 +2369,35 @@  static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 		sb = &ares->data.spi_serial_bus;
 		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
 
+			if (lookup->index != -1 && lookup->n++ != lookup->index)
+				return 1;
+
+			if (lookup->index == -1 && !ctlr)
+				return -ENODEV;
+
 			status = acpi_get_handle(NULL,
 						 sb->resource_source.string_ptr,
 						 &parent_handle);
 
-			if (ACPI_FAILURE(status) ||
-			    ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
+			if (ACPI_FAILURE(status))
 				return -ENODEV;
 
+			if (ctlr) {
+				if (ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
+					return -ENODEV;
+			} else {
+				struct acpi_device *adev;
+
+				if (acpi_bus_get_device(parent_handle, &adev))
+					return -ENODEV;
+
+				ctlr = acpi_spi_find_controller_by_adev(adev);
+				if (!ctlr)
+					return -ENODEV;
+
+				lookup->ctlr = ctlr;
+			}
+
 			/*
 			 * ACPI DeviceSelection numbering is handled by the
 			 * host controller driver in Windows and can vary
@@ -2402,7 +2428,7 @@  static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 	} else if (lookup->irq < 0) {
 		struct resource r;
 
-		if (acpi_dev_resource_interrupt(ares, 0, &r))
+		if (acpi_dev_resource_interrupt(ares, lookup->irq_index, &r))
 			lookup->irq = r.start;
 	}
 
@@ -2414,14 +2440,22 @@  static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
  * acpi_spi_device_alloc - Allocate a spi device, and fill it in with ACPI information
  * @ctlr: controller to which the spi device belongs
  * @adev: ACPI Device for the spi device
+ * @index: Index of the spi resource inside the ACPI Node
+ * @irq_index: Index of the GPIO resource for the IRQ inside the ACPI Node
  *
  * This should be used to allocate a new spi device from and ACPI Node.
  * The caller is responsible for calling spi_add_device to register the spi device.
  *
+ * If ctlr is set to NULL, the Controller for the spi device will be looked up
+ * using the resource.
+ * If index is set to -1, index is not used.
+ * Note: If index is -1, ctlr must be set.
+ *
  * Return: a pointer to the new device, or ERR_PTR on error.
  */
 struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
-					 struct acpi_device *adev)
+					 struct acpi_device *adev,
+					 int index, int irq_index)
 {
 	acpi_handle parent_handle = NULL;
 	struct list_head resource_list;
@@ -2429,8 +2463,14 @@  struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 	struct spi_device *spi;
 	int ret;
 
+	if (!ctlr && index == -1)
+		return ERR_PTR(-EINVAL);
+
 	lookup.ctlr		= ctlr;
 	lookup.irq		= -1;
+	lookup.index		= index;
+	lookup.n		= 0;
+	lookup.irq_index	= irq_index;
 
 	INIT_LIST_HEAD(&resource_list);
 	ret = acpi_dev_get_resources(adev, &resource_list,
@@ -2443,7 +2483,7 @@  struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 
 	if (!lookup.max_speed_hz &&
 	    ACPI_SUCCESS(acpi_get_parent(adev->handle, &parent_handle)) &&
-	    ACPI_HANDLE(ctlr->dev.parent) == parent_handle) {
+	    ACPI_HANDLE(lookup.ctlr->dev.parent) == parent_handle) {
 		/* Apple does not use _CRS but nested devices for SPI slaves */
 		acpi_spi_parse_apple_properties(adev, &lookup);
 	}
@@ -2451,9 +2491,9 @@  struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 	if (!lookup.max_speed_hz)
 		return ERR_PTR(-ENODEV);
 
-	spi = spi_alloc_device(ctlr);
+	spi = spi_alloc_device(lookup.ctlr);
 	if (!spi) {
-		dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
+		dev_err(&lookup.ctlr->dev, "failed to allocate SPI device for %s\n",
 			dev_name(&adev->dev));
 		return ERR_PTR(-ENOMEM);
 	}
@@ -2478,7 +2518,7 @@  static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
 	    acpi_device_enumerated(adev))
 		return AE_OK;
 
-	spi = acpi_spi_device_alloc(ctlr, adev);
+	spi = acpi_spi_device_alloc(ctlr, adev, -1, 0);
 	if (IS_ERR(spi)) {
 		if (PTR_ERR(spi) == -ENOMEM)
 			return AE_NO_MEMORY;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 200725692b93..1a34fd0f6ca2 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -762,10 +762,12 @@  extern void spi_unregister_controller(struct spi_controller *ctlr);
 
 #if IS_ENABLED(CONFIG_ACPI)
 extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
-						struct acpi_device *adev);
+						struct acpi_device *adev,
+						int index, int irq_index);
 #else
 static inline struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
-						       struct acpi_device *adev);
+						       struct acpi_device *adev,
+						       int index, int irq_index);
 {
 	return ERR_PTR(-EOPNOTSUPP);
 }