diff mbox series

[RFC,v1,05/21] arm64: PCI: Migrate ACPI related functions to pci-acpi.c

Message ID 20230803175916.3174453-6-sunilvl@ventanamicro.com
State Superseded
Headers show
Series RISC-V: ACPI: Add external interrupt controller support | expand

Commit Message

Sunil V L Aug. 3, 2023, 5:59 p.m. UTC
The functions defined in arm64 for ACPI support are required
for RISC-V also. To avoid duplication, copy these functions
to common location.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
---
 arch/arm64/kernel/pci.c | 193 ----------------------------------------
 drivers/pci/pci-acpi.c  | 182 +++++++++++++++++++++++++++++++++++++
 2 files changed, 182 insertions(+), 193 deletions(-)

Comments

Andy Shevchenko Aug. 4, 2023, 5:53 a.m. UTC | #1
On Thu, Aug 03, 2023 at 11:29:00PM +0530, Sunil V L wrote:
> The functions defined in arm64 for ACPI support are required
> for RISC-V also. To avoid duplication, copy these functions
> to common location.

...

>  }
> +

Stray change.

>  arch_initcall(acpi_pci_init);
> +
> +#if defined(CONFIG_ARM64)

...

> +	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
> +	if (IS_ERR(cfg)) {
> +		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
> +			PTR_ERR(cfg));
> +		return NULL;
> +	}
> +
> +	return cfg;

Can be

	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
	ret = PTR_ERR_OR_ZERO(cfg);
	if (ret) {
		dev_err(dev, "%04x:%pR error %d mapping ECAM\n", seg, bus_res, ret);

but as far as I understand this is in the original code like this, so consider
as a suggestion for further cleanups.
Sunil V L Aug. 4, 2023, 8:23 a.m. UTC | #2
On Fri, Aug 04, 2023 at 08:53:14AM +0300, Andy Shevchenko wrote:
> On Thu, Aug 03, 2023 at 11:29:00PM +0530, Sunil V L wrote:
> > The functions defined in arm64 for ACPI support are required
> > for RISC-V also. To avoid duplication, copy these functions
> > to common location.
> 
> ...
> 
> >  }
> > +
> 
> Stray change.
> 
Let me remove this in next version.

> >  arch_initcall(acpi_pci_init);
> > +
> > +#if defined(CONFIG_ARM64)
> 
> ...
> 
> > +	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
> > +	if (IS_ERR(cfg)) {
> > +		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
> > +			PTR_ERR(cfg));
> > +		return NULL;
> > +	}
> > +
> > +	return cfg;
> 
> Can be
> 
> 	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
> 	ret = PTR_ERR_OR_ZERO(cfg);
> 	if (ret) {
> 		dev_err(dev, "%04x:%pR error %d mapping ECAM\n", seg, bus_res, ret);
> 
> but as far as I understand this is in the original code like this, so consider
> as a suggestion for further cleanups.
>

Good suggestion!. Sure, we can cleanup as a follow on patch.

Thanks,
Sunil
Bjorn Helgaas Aug. 7, 2023, 10:41 p.m. UTC | #3
On Thu, Aug 03, 2023 at 11:29:00PM +0530, Sunil V L wrote:
> The functions defined in arm64 for ACPI support are required
> for RISC-V also. To avoid duplication, copy these functions
> to common location.

I assume this is a "move" (not a copy) and the code being moved isn't
being changed.

If so,

  Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> ---
>  arch/arm64/kernel/pci.c | 193 ----------------------------------------
>  drivers/pci/pci-acpi.c  | 182 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 182 insertions(+), 193 deletions(-)
> 
> diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
> index 2276689b5411..fd9a7bed83ce 100644
> --- a/arch/arm64/kernel/pci.c
> +++ b/arch/arm64/kernel/pci.c
> @@ -6,30 +6,7 @@
>   * Copyright (C) 2014 ARM Ltd.
>   */
>  
> -#include <linux/acpi.h>
> -#include <linux/init.h>
> -#include <linux/io.h>
> -#include <linux/kernel.h>
> -#include <linux/mm.h>
> -#include <linux/of_pci.h>
> -#include <linux/of_platform.h>
>  #include <linux/pci.h>
> -#include <linux/pci-acpi.h>
> -#include <linux/pci-ecam.h>
> -#include <linux/slab.h>
> -
> -#ifdef CONFIG_ACPI
> -/*
> - * Try to assign the IRQ number when probing a new device
> - */
> -int pcibios_alloc_irq(struct pci_dev *dev)
> -{
> -	if (!acpi_disabled)
> -		acpi_pci_irq_enable(dev);
> -
> -	return 0;
> -}
> -#endif
>  
>  /*
>   * raw_pci_read/write - Platform-specific PCI config space access.
> @@ -63,173 +40,3 @@ int pcibus_to_node(struct pci_bus *bus)
>  EXPORT_SYMBOL(pcibus_to_node);
>  
>  #endif
> -
> -#ifdef CONFIG_ACPI
> -
> -struct acpi_pci_generic_root_info {
> -	struct acpi_pci_root_info	common;
> -	struct pci_config_window	*cfg;	/* config space mapping */
> -};
> -
> -int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> -{
> -	struct pci_config_window *cfg = bus->sysdata;
> -	struct acpi_device *adev = to_acpi_device(cfg->parent);
> -	struct acpi_pci_root *root = acpi_driver_data(adev);
> -
> -	return root->segment;
> -}
> -
> -int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> -{
> -	struct pci_config_window *cfg;
> -	struct acpi_device *adev;
> -	struct device *bus_dev;
> -
> -	if (acpi_disabled)
> -		return 0;
> -
> -	cfg = bridge->bus->sysdata;
> -
> -	/*
> -	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
> -	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
> -	 * NULL in this case because there is no proper ACPI device.
> -	 */
> -	if (!cfg->parent)
> -		adev = NULL;
> -	else
> -		adev = to_acpi_device(cfg->parent);
> -
> -	bus_dev = &bridge->bus->dev;
> -
> -	ACPI_COMPANION_SET(&bridge->dev, adev);
> -	set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
> -
> -	return 0;
> -}
> -
> -static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
> -{
> -	struct resource_entry *entry, *tmp;
> -	int status;
> -
> -	status = acpi_pci_probe_root_resources(ci);
> -	resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
> -		if (!(entry->res->flags & IORESOURCE_WINDOW))
> -			resource_list_destroy_entry(entry);
> -	}
> -	return status;
> -}
> -
> -/*
> - * Lookup the bus range for the domain in MCFG, and set up config space
> - * mapping.
> - */
> -static struct pci_config_window *
> -pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
> -{
> -	struct device *dev = &root->device->dev;
> -	struct resource *bus_res = &root->secondary;
> -	u16 seg = root->segment;
> -	const struct pci_ecam_ops *ecam_ops;
> -	struct resource cfgres;
> -	struct acpi_device *adev;
> -	struct pci_config_window *cfg;
> -	int ret;
> -
> -	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
> -	if (ret) {
> -		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
> -		return NULL;
> -	}
> -
> -	adev = acpi_resource_consumer(&cfgres);
> -	if (adev)
> -		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
> -			 dev_name(&adev->dev));
> -	else
> -		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
> -			 &cfgres);
> -
> -	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
> -	if (IS_ERR(cfg)) {
> -		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
> -			PTR_ERR(cfg));
> -		return NULL;
> -	}
> -
> -	return cfg;
> -}
> -
> -/* release_info: free resources allocated by init_info */
> -static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
> -{
> -	struct acpi_pci_generic_root_info *ri;
> -
> -	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
> -	pci_ecam_free(ri->cfg);
> -	kfree(ci->ops);
> -	kfree(ri);
> -}
> -
> -/* Interface called from ACPI code to setup PCI host controller */
> -struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> -{
> -	struct acpi_pci_generic_root_info *ri;
> -	struct pci_bus *bus, *child;
> -	struct acpi_pci_root_ops *root_ops;
> -	struct pci_host_bridge *host;
> -
> -	ri = kzalloc(sizeof(*ri), GFP_KERNEL);
> -	if (!ri)
> -		return NULL;
> -
> -	root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
> -	if (!root_ops) {
> -		kfree(ri);
> -		return NULL;
> -	}
> -
> -	ri->cfg = pci_acpi_setup_ecam_mapping(root);
> -	if (!ri->cfg) {
> -		kfree(ri);
> -		kfree(root_ops);
> -		return NULL;
> -	}
> -
> -	root_ops->release_info = pci_acpi_generic_release_info;
> -	root_ops->prepare_resources = pci_acpi_root_prepare_resources;
> -	root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
> -	bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
> -	if (!bus)
> -		return NULL;
> -
> -	/* If we must preserve the resource configuration, claim now */
> -	host = pci_find_host_bridge(bus);
> -	if (host->preserve_config)
> -		pci_bus_claim_resources(bus);
> -
> -	/*
> -	 * Assign whatever was left unassigned. If we didn't claim above,
> -	 * this will reassign everything.
> -	 */
> -	pci_assign_unassigned_root_bus_resources(bus);
> -
> -	list_for_each_entry(child, &bus->children, node)
> -		pcie_bus_configure_settings(child);
> -
> -	return bus;
> -}
> -
> -void pcibios_add_bus(struct pci_bus *bus)
> -{
> -	acpi_pci_add_bus(bus);
> -}
> -
> -void pcibios_remove_bus(struct pci_bus *bus)
> -{
> -	acpi_pci_remove_bus(bus);
> -}
> -
> -#endif
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index a05350a4e49c..d6b2d64b8237 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -15,6 +15,7 @@
>  #include <linux/pci_hotplug.h>
>  #include <linux/module.h>
>  #include <linux/pci-acpi.h>
> +#include <linux/pci-ecam.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/pm_qos.h>
>  #include <linux/rwsem.h>
> @@ -1517,4 +1518,185 @@ static int __init acpi_pci_init(void)
>  
>  	return 0;
>  }
> +
>  arch_initcall(acpi_pci_init);
> +
> +#if defined(CONFIG_ARM64)
> +/*
> + * Try to assign the IRQ number when probing a new device
> + */
> +int pcibios_alloc_irq(struct pci_dev *dev)
> +{
> +	if (!acpi_disabled)
> +		acpi_pci_irq_enable(dev);
> +
> +	return 0;
> +}
> +
> +struct acpi_pci_generic_root_info {
> +	struct acpi_pci_root_info	common;
> +	struct pci_config_window	*cfg;	/* config space mapping */
> +};
> +
> +int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> +{
> +	struct pci_config_window *cfg = bus->sysdata;
> +	struct acpi_device *adev = to_acpi_device(cfg->parent);
> +	struct acpi_pci_root *root = acpi_driver_data(adev);
> +
> +	return root->segment;
> +}
> +
> +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> +{
> +	struct pci_config_window *cfg;
> +	struct acpi_device *adev;
> +	struct device *bus_dev;
> +
> +	if (acpi_disabled)
> +		return 0;
> +
> +	cfg = bridge->bus->sysdata;
> +
> +	/*
> +	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
> +	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
> +	 * NULL in this case because there is no proper ACPI device.
> +	 */
> +	if (!cfg->parent)
> +		adev = NULL;
> +	else
> +		adev = to_acpi_device(cfg->parent);
> +
> +	bus_dev = &bridge->bus->dev;
> +
> +	ACPI_COMPANION_SET(&bridge->dev, adev);
> +	set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
> +
> +	return 0;
> +}
> +
> +static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
> +{
> +	struct resource_entry *entry, *tmp;
> +	int status;
> +
> +	status = acpi_pci_probe_root_resources(ci);
> +	resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
> +		if (!(entry->res->flags & IORESOURCE_WINDOW))
> +			resource_list_destroy_entry(entry);
> +	}
> +	return status;
> +}
> +
> +/*
> + * Lookup the bus range for the domain in MCFG, and set up config space
> + * mapping.
> + */
> +static struct pci_config_window *
> +pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
> +{
> +	struct device *dev = &root->device->dev;
> +	struct resource *bus_res = &root->secondary;
> +	u16 seg = root->segment;
> +	const struct pci_ecam_ops *ecam_ops;
> +	struct resource cfgres;
> +	struct acpi_device *adev;
> +	struct pci_config_window *cfg;
> +	int ret;
> +
> +	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
> +	if (ret) {
> +		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
> +		return NULL;
> +	}
> +
> +	adev = acpi_resource_consumer(&cfgres);
> +	if (adev)
> +		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
> +			 dev_name(&adev->dev));
> +	else
> +		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
> +			 &cfgres);
> +
> +	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
> +	if (IS_ERR(cfg)) {
> +		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
> +			PTR_ERR(cfg));
> +		return NULL;
> +	}
> +
> +	return cfg;
> +}
> +
> +/* release_info: free resources allocated by init_info */
> +static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
> +{
> +	struct acpi_pci_generic_root_info *ri;
> +
> +	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
> +	pci_ecam_free(ri->cfg);
> +	kfree(ci->ops);
> +	kfree(ri);
> +}
> +
> +/* Interface called from ACPI code to setup PCI host controller */
> +struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> +{
> +	struct acpi_pci_generic_root_info *ri;
> +	struct pci_bus *bus, *child;
> +	struct acpi_pci_root_ops *root_ops;
> +	struct pci_host_bridge *host;
> +
> +	ri = kzalloc(sizeof(*ri), GFP_KERNEL);
> +	if (!ri)
> +		return NULL;
> +
> +	root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
> +	if (!root_ops) {
> +		kfree(ri);
> +		return NULL;
> +	}
> +
> +	ri->cfg = pci_acpi_setup_ecam_mapping(root);
> +	if (!ri->cfg) {
> +		kfree(ri);
> +		kfree(root_ops);
> +		return NULL;
> +	}
> +
> +	root_ops->release_info = pci_acpi_generic_release_info;
> +	root_ops->prepare_resources = pci_acpi_root_prepare_resources;
> +	root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
> +	bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
> +	if (!bus)
> +		return NULL;
> +
> +	/* If we must preserve the resource configuration, claim now */
> +	host = pci_find_host_bridge(bus);
> +	if (host->preserve_config)
> +		pci_bus_claim_resources(bus);
> +
> +	/*
> +	 * Assign whatever was left unassigned. If we didn't claim above,
> +	 * this will reassign everything.
> +	 */
> +	pci_assign_unassigned_root_bus_resources(bus);
> +
> +	list_for_each_entry(child, &bus->children, node)
> +		pcie_bus_configure_settings(child);
> +
> +	return bus;
> +}
> +
> +void pcibios_add_bus(struct pci_bus *bus)
> +{
> +	acpi_pci_add_bus(bus);
> +}
> +
> +void pcibios_remove_bus(struct pci_bus *bus)
> +{
> +	acpi_pci_remove_bus(bus);
> +}
> +
> +#endif
> -- 
> 2.39.2
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Sunil V L Aug. 8, 2023, 4:52 a.m. UTC | #4
On Mon, Aug 07, 2023 at 05:41:52PM -0500, Bjorn Helgaas wrote:
> On Thu, Aug 03, 2023 at 11:29:00PM +0530, Sunil V L wrote:
> > The functions defined in arm64 for ACPI support are required
> > for RISC-V also. To avoid duplication, copy these functions
> > to common location.
> 
> I assume this is a "move" (not a copy) and the code being moved isn't
> being changed.
> 
Hi Bjorn,

Thank you very much for the review!. Yes, it is a move as is. Let me
update the commit message in next version.

Thanks!
Sunil
> If so,
> 
>   Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> 
> > Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> > ---
> >  arch/arm64/kernel/pci.c | 193 ----------------------------------------
> >  drivers/pci/pci-acpi.c  | 182 +++++++++++++++++++++++++++++++++++++
> >  2 files changed, 182 insertions(+), 193 deletions(-)
> > 
> > diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
> > index 2276689b5411..fd9a7bed83ce 100644
> > --- a/arch/arm64/kernel/pci.c
> > +++ b/arch/arm64/kernel/pci.c
> > @@ -6,30 +6,7 @@
> >   * Copyright (C) 2014 ARM Ltd.
> >   */
> >  
> > -#include <linux/acpi.h>
> > -#include <linux/init.h>
> > -#include <linux/io.h>
> > -#include <linux/kernel.h>
> > -#include <linux/mm.h>
> > -#include <linux/of_pci.h>
> > -#include <linux/of_platform.h>
> >  #include <linux/pci.h>
> > -#include <linux/pci-acpi.h>
> > -#include <linux/pci-ecam.h>
> > -#include <linux/slab.h>
> > -
> > -#ifdef CONFIG_ACPI
> > -/*
> > - * Try to assign the IRQ number when probing a new device
> > - */
> > -int pcibios_alloc_irq(struct pci_dev *dev)
> > -{
> > -	if (!acpi_disabled)
> > -		acpi_pci_irq_enable(dev);
> > -
> > -	return 0;
> > -}
> > -#endif
> >  
> >  /*
> >   * raw_pci_read/write - Platform-specific PCI config space access.
> > @@ -63,173 +40,3 @@ int pcibus_to_node(struct pci_bus *bus)
> >  EXPORT_SYMBOL(pcibus_to_node);
> >  
> >  #endif
> > -
> > -#ifdef CONFIG_ACPI
> > -
> > -struct acpi_pci_generic_root_info {
> > -	struct acpi_pci_root_info	common;
> > -	struct pci_config_window	*cfg;	/* config space mapping */
> > -};
> > -
> > -int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> > -{
> > -	struct pci_config_window *cfg = bus->sysdata;
> > -	struct acpi_device *adev = to_acpi_device(cfg->parent);
> > -	struct acpi_pci_root *root = acpi_driver_data(adev);
> > -
> > -	return root->segment;
> > -}
> > -
> > -int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> > -{
> > -	struct pci_config_window *cfg;
> > -	struct acpi_device *adev;
> > -	struct device *bus_dev;
> > -
> > -	if (acpi_disabled)
> > -		return 0;
> > -
> > -	cfg = bridge->bus->sysdata;
> > -
> > -	/*
> > -	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
> > -	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
> > -	 * NULL in this case because there is no proper ACPI device.
> > -	 */
> > -	if (!cfg->parent)
> > -		adev = NULL;
> > -	else
> > -		adev = to_acpi_device(cfg->parent);
> > -
> > -	bus_dev = &bridge->bus->dev;
> > -
> > -	ACPI_COMPANION_SET(&bridge->dev, adev);
> > -	set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
> > -
> > -	return 0;
> > -}
> > -
> > -static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
> > -{
> > -	struct resource_entry *entry, *tmp;
> > -	int status;
> > -
> > -	status = acpi_pci_probe_root_resources(ci);
> > -	resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
> > -		if (!(entry->res->flags & IORESOURCE_WINDOW))
> > -			resource_list_destroy_entry(entry);
> > -	}
> > -	return status;
> > -}
> > -
> > -/*
> > - * Lookup the bus range for the domain in MCFG, and set up config space
> > - * mapping.
> > - */
> > -static struct pci_config_window *
> > -pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
> > -{
> > -	struct device *dev = &root->device->dev;
> > -	struct resource *bus_res = &root->secondary;
> > -	u16 seg = root->segment;
> > -	const struct pci_ecam_ops *ecam_ops;
> > -	struct resource cfgres;
> > -	struct acpi_device *adev;
> > -	struct pci_config_window *cfg;
> > -	int ret;
> > -
> > -	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
> > -	if (ret) {
> > -		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
> > -		return NULL;
> > -	}
> > -
> > -	adev = acpi_resource_consumer(&cfgres);
> > -	if (adev)
> > -		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
> > -			 dev_name(&adev->dev));
> > -	else
> > -		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
> > -			 &cfgres);
> > -
> > -	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
> > -	if (IS_ERR(cfg)) {
> > -		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
> > -			PTR_ERR(cfg));
> > -		return NULL;
> > -	}
> > -
> > -	return cfg;
> > -}
> > -
> > -/* release_info: free resources allocated by init_info */
> > -static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
> > -{
> > -	struct acpi_pci_generic_root_info *ri;
> > -
> > -	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
> > -	pci_ecam_free(ri->cfg);
> > -	kfree(ci->ops);
> > -	kfree(ri);
> > -}
> > -
> > -/* Interface called from ACPI code to setup PCI host controller */
> > -struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> > -{
> > -	struct acpi_pci_generic_root_info *ri;
> > -	struct pci_bus *bus, *child;
> > -	struct acpi_pci_root_ops *root_ops;
> > -	struct pci_host_bridge *host;
> > -
> > -	ri = kzalloc(sizeof(*ri), GFP_KERNEL);
> > -	if (!ri)
> > -		return NULL;
> > -
> > -	root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
> > -	if (!root_ops) {
> > -		kfree(ri);
> > -		return NULL;
> > -	}
> > -
> > -	ri->cfg = pci_acpi_setup_ecam_mapping(root);
> > -	if (!ri->cfg) {
> > -		kfree(ri);
> > -		kfree(root_ops);
> > -		return NULL;
> > -	}
> > -
> > -	root_ops->release_info = pci_acpi_generic_release_info;
> > -	root_ops->prepare_resources = pci_acpi_root_prepare_resources;
> > -	root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
> > -	bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
> > -	if (!bus)
> > -		return NULL;
> > -
> > -	/* If we must preserve the resource configuration, claim now */
> > -	host = pci_find_host_bridge(bus);
> > -	if (host->preserve_config)
> > -		pci_bus_claim_resources(bus);
> > -
> > -	/*
> > -	 * Assign whatever was left unassigned. If we didn't claim above,
> > -	 * this will reassign everything.
> > -	 */
> > -	pci_assign_unassigned_root_bus_resources(bus);
> > -
> > -	list_for_each_entry(child, &bus->children, node)
> > -		pcie_bus_configure_settings(child);
> > -
> > -	return bus;
> > -}
> > -
> > -void pcibios_add_bus(struct pci_bus *bus)
> > -{
> > -	acpi_pci_add_bus(bus);
> > -}
> > -
> > -void pcibios_remove_bus(struct pci_bus *bus)
> > -{
> > -	acpi_pci_remove_bus(bus);
> > -}
> > -
> > -#endif
> > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> > index a05350a4e49c..d6b2d64b8237 100644
> > --- a/drivers/pci/pci-acpi.c
> > +++ b/drivers/pci/pci-acpi.c
> > @@ -15,6 +15,7 @@
> >  #include <linux/pci_hotplug.h>
> >  #include <linux/module.h>
> >  #include <linux/pci-acpi.h>
> > +#include <linux/pci-ecam.h>
> >  #include <linux/pm_runtime.h>
> >  #include <linux/pm_qos.h>
> >  #include <linux/rwsem.h>
> > @@ -1517,4 +1518,185 @@ static int __init acpi_pci_init(void)
> >  
> >  	return 0;
> >  }
> > +
> >  arch_initcall(acpi_pci_init);
> > +
> > +#if defined(CONFIG_ARM64)
> > +/*
> > + * Try to assign the IRQ number when probing a new device
> > + */
> > +int pcibios_alloc_irq(struct pci_dev *dev)
> > +{
> > +	if (!acpi_disabled)
> > +		acpi_pci_irq_enable(dev);
> > +
> > +	return 0;
> > +}
> > +
> > +struct acpi_pci_generic_root_info {
> > +	struct acpi_pci_root_info	common;
> > +	struct pci_config_window	*cfg;	/* config space mapping */
> > +};
> > +
> > +int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> > +{
> > +	struct pci_config_window *cfg = bus->sysdata;
> > +	struct acpi_device *adev = to_acpi_device(cfg->parent);
> > +	struct acpi_pci_root *root = acpi_driver_data(adev);
> > +
> > +	return root->segment;
> > +}
> > +
> > +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> > +{
> > +	struct pci_config_window *cfg;
> > +	struct acpi_device *adev;
> > +	struct device *bus_dev;
> > +
> > +	if (acpi_disabled)
> > +		return 0;
> > +
> > +	cfg = bridge->bus->sysdata;
> > +
> > +	/*
> > +	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
> > +	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
> > +	 * NULL in this case because there is no proper ACPI device.
> > +	 */
> > +	if (!cfg->parent)
> > +		adev = NULL;
> > +	else
> > +		adev = to_acpi_device(cfg->parent);
> > +
> > +	bus_dev = &bridge->bus->dev;
> > +
> > +	ACPI_COMPANION_SET(&bridge->dev, adev);
> > +	set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
> > +
> > +	return 0;
> > +}
> > +
> > +static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
> > +{
> > +	struct resource_entry *entry, *tmp;
> > +	int status;
> > +
> > +	status = acpi_pci_probe_root_resources(ci);
> > +	resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
> > +		if (!(entry->res->flags & IORESOURCE_WINDOW))
> > +			resource_list_destroy_entry(entry);
> > +	}
> > +	return status;
> > +}
> > +
> > +/*
> > + * Lookup the bus range for the domain in MCFG, and set up config space
> > + * mapping.
> > + */
> > +static struct pci_config_window *
> > +pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
> > +{
> > +	struct device *dev = &root->device->dev;
> > +	struct resource *bus_res = &root->secondary;
> > +	u16 seg = root->segment;
> > +	const struct pci_ecam_ops *ecam_ops;
> > +	struct resource cfgres;
> > +	struct acpi_device *adev;
> > +	struct pci_config_window *cfg;
> > +	int ret;
> > +
> > +	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
> > +	if (ret) {
> > +		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
> > +		return NULL;
> > +	}
> > +
> > +	adev = acpi_resource_consumer(&cfgres);
> > +	if (adev)
> > +		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
> > +			 dev_name(&adev->dev));
> > +	else
> > +		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
> > +			 &cfgres);
> > +
> > +	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
> > +	if (IS_ERR(cfg)) {
> > +		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
> > +			PTR_ERR(cfg));
> > +		return NULL;
> > +	}
> > +
> > +	return cfg;
> > +}
> > +
> > +/* release_info: free resources allocated by init_info */
> > +static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
> > +{
> > +	struct acpi_pci_generic_root_info *ri;
> > +
> > +	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
> > +	pci_ecam_free(ri->cfg);
> > +	kfree(ci->ops);
> > +	kfree(ri);
> > +}
> > +
> > +/* Interface called from ACPI code to setup PCI host controller */
> > +struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> > +{
> > +	struct acpi_pci_generic_root_info *ri;
> > +	struct pci_bus *bus, *child;
> > +	struct acpi_pci_root_ops *root_ops;
> > +	struct pci_host_bridge *host;
> > +
> > +	ri = kzalloc(sizeof(*ri), GFP_KERNEL);
> > +	if (!ri)
> > +		return NULL;
> > +
> > +	root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
> > +	if (!root_ops) {
> > +		kfree(ri);
> > +		return NULL;
> > +	}
> > +
> > +	ri->cfg = pci_acpi_setup_ecam_mapping(root);
> > +	if (!ri->cfg) {
> > +		kfree(ri);
> > +		kfree(root_ops);
> > +		return NULL;
> > +	}
> > +
> > +	root_ops->release_info = pci_acpi_generic_release_info;
> > +	root_ops->prepare_resources = pci_acpi_root_prepare_resources;
> > +	root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
> > +	bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
> > +	if (!bus)
> > +		return NULL;
> > +
> > +	/* If we must preserve the resource configuration, claim now */
> > +	host = pci_find_host_bridge(bus);
> > +	if (host->preserve_config)
> > +		pci_bus_claim_resources(bus);
> > +
> > +	/*
> > +	 * Assign whatever was left unassigned. If we didn't claim above,
> > +	 * this will reassign everything.
> > +	 */
> > +	pci_assign_unassigned_root_bus_resources(bus);
> > +
> > +	list_for_each_entry(child, &bus->children, node)
> > +		pcie_bus_configure_settings(child);
> > +
> > +	return bus;
> > +}
> > +
> > +void pcibios_add_bus(struct pci_bus *bus)
> > +{
> > +	acpi_pci_add_bus(bus);
> > +}
> > +
> > +void pcibios_remove_bus(struct pci_bus *bus)
> > +{
> > +	acpi_pci_remove_bus(bus);
> > +}
> > +
> > +#endif
> > -- 
> > 2.39.2
> > 
> > 
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Andy Shevchenko Aug. 8, 2023, 1:11 p.m. UTC | #5
On Tue, Aug 08, 2023 at 10:22:10AM +0530, Sunil V L wrote:
> On Mon, Aug 07, 2023 at 05:41:52PM -0500, Bjorn Helgaas wrote:
> > On Thu, Aug 03, 2023 at 11:29:00PM +0530, Sunil V L wrote:
> > > The functions defined in arm64 for ACPI support are required
> > > for RISC-V also. To avoid duplication, copy these functions
> > > to common location.
> > 
> > I assume this is a "move" (not a copy) and the code being moved isn't
> > being changed.
> 
> Thank you very much for the review!. Yes, it is a move as is. Let me
> update the commit message in next version.

Try to play with -M -C
diff mbox series

Patch

diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index 2276689b5411..fd9a7bed83ce 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -6,30 +6,7 @@ 
  * Copyright (C) 2014 ARM Ltd.
  */
 
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/of_pci.h>
-#include <linux/of_platform.h>
 #include <linux/pci.h>
-#include <linux/pci-acpi.h>
-#include <linux/pci-ecam.h>
-#include <linux/slab.h>
-
-#ifdef CONFIG_ACPI
-/*
- * Try to assign the IRQ number when probing a new device
- */
-int pcibios_alloc_irq(struct pci_dev *dev)
-{
-	if (!acpi_disabled)
-		acpi_pci_irq_enable(dev);
-
-	return 0;
-}
-#endif
 
 /*
  * raw_pci_read/write - Platform-specific PCI config space access.
@@ -63,173 +40,3 @@  int pcibus_to_node(struct pci_bus *bus)
 EXPORT_SYMBOL(pcibus_to_node);
 
 #endif
-
-#ifdef CONFIG_ACPI
-
-struct acpi_pci_generic_root_info {
-	struct acpi_pci_root_info	common;
-	struct pci_config_window	*cfg;	/* config space mapping */
-};
-
-int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
-{
-	struct pci_config_window *cfg = bus->sysdata;
-	struct acpi_device *adev = to_acpi_device(cfg->parent);
-	struct acpi_pci_root *root = acpi_driver_data(adev);
-
-	return root->segment;
-}
-
-int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
-{
-	struct pci_config_window *cfg;
-	struct acpi_device *adev;
-	struct device *bus_dev;
-
-	if (acpi_disabled)
-		return 0;
-
-	cfg = bridge->bus->sysdata;
-
-	/*
-	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
-	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
-	 * NULL in this case because there is no proper ACPI device.
-	 */
-	if (!cfg->parent)
-		adev = NULL;
-	else
-		adev = to_acpi_device(cfg->parent);
-
-	bus_dev = &bridge->bus->dev;
-
-	ACPI_COMPANION_SET(&bridge->dev, adev);
-	set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
-
-	return 0;
-}
-
-static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
-{
-	struct resource_entry *entry, *tmp;
-	int status;
-
-	status = acpi_pci_probe_root_resources(ci);
-	resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
-		if (!(entry->res->flags & IORESOURCE_WINDOW))
-			resource_list_destroy_entry(entry);
-	}
-	return status;
-}
-
-/*
- * Lookup the bus range for the domain in MCFG, and set up config space
- * mapping.
- */
-static struct pci_config_window *
-pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
-{
-	struct device *dev = &root->device->dev;
-	struct resource *bus_res = &root->secondary;
-	u16 seg = root->segment;
-	const struct pci_ecam_ops *ecam_ops;
-	struct resource cfgres;
-	struct acpi_device *adev;
-	struct pci_config_window *cfg;
-	int ret;
-
-	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
-	if (ret) {
-		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
-		return NULL;
-	}
-
-	adev = acpi_resource_consumer(&cfgres);
-	if (adev)
-		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
-			 dev_name(&adev->dev));
-	else
-		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
-			 &cfgres);
-
-	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
-	if (IS_ERR(cfg)) {
-		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
-			PTR_ERR(cfg));
-		return NULL;
-	}
-
-	return cfg;
-}
-
-/* release_info: free resources allocated by init_info */
-static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
-{
-	struct acpi_pci_generic_root_info *ri;
-
-	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
-	pci_ecam_free(ri->cfg);
-	kfree(ci->ops);
-	kfree(ri);
-}
-
-/* Interface called from ACPI code to setup PCI host controller */
-struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
-{
-	struct acpi_pci_generic_root_info *ri;
-	struct pci_bus *bus, *child;
-	struct acpi_pci_root_ops *root_ops;
-	struct pci_host_bridge *host;
-
-	ri = kzalloc(sizeof(*ri), GFP_KERNEL);
-	if (!ri)
-		return NULL;
-
-	root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
-	if (!root_ops) {
-		kfree(ri);
-		return NULL;
-	}
-
-	ri->cfg = pci_acpi_setup_ecam_mapping(root);
-	if (!ri->cfg) {
-		kfree(ri);
-		kfree(root_ops);
-		return NULL;
-	}
-
-	root_ops->release_info = pci_acpi_generic_release_info;
-	root_ops->prepare_resources = pci_acpi_root_prepare_resources;
-	root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
-	bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
-	if (!bus)
-		return NULL;
-
-	/* If we must preserve the resource configuration, claim now */
-	host = pci_find_host_bridge(bus);
-	if (host->preserve_config)
-		pci_bus_claim_resources(bus);
-
-	/*
-	 * Assign whatever was left unassigned. If we didn't claim above,
-	 * this will reassign everything.
-	 */
-	pci_assign_unassigned_root_bus_resources(bus);
-
-	list_for_each_entry(child, &bus->children, node)
-		pcie_bus_configure_settings(child);
-
-	return bus;
-}
-
-void pcibios_add_bus(struct pci_bus *bus)
-{
-	acpi_pci_add_bus(bus);
-}
-
-void pcibios_remove_bus(struct pci_bus *bus)
-{
-	acpi_pci_remove_bus(bus);
-}
-
-#endif
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index a05350a4e49c..d6b2d64b8237 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -15,6 +15,7 @@ 
 #include <linux/pci_hotplug.h>
 #include <linux/module.h>
 #include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 #include <linux/pm_runtime.h>
 #include <linux/pm_qos.h>
 #include <linux/rwsem.h>
@@ -1517,4 +1518,185 @@  static int __init acpi_pci_init(void)
 
 	return 0;
 }
+
 arch_initcall(acpi_pci_init);
+
+#if defined(CONFIG_ARM64)
+/*
+ * Try to assign the IRQ number when probing a new device
+ */
+int pcibios_alloc_irq(struct pci_dev *dev)
+{
+	if (!acpi_disabled)
+		acpi_pci_irq_enable(dev);
+
+	return 0;
+}
+
+struct acpi_pci_generic_root_info {
+	struct acpi_pci_root_info	common;
+	struct pci_config_window	*cfg;	/* config space mapping */
+};
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	struct acpi_device *adev = to_acpi_device(cfg->parent);
+	struct acpi_pci_root *root = acpi_driver_data(adev);
+
+	return root->segment;
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	struct pci_config_window *cfg;
+	struct acpi_device *adev;
+	struct device *bus_dev;
+
+	if (acpi_disabled)
+		return 0;
+
+	cfg = bridge->bus->sysdata;
+
+	/*
+	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
+	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
+	 * NULL in this case because there is no proper ACPI device.
+	 */
+	if (!cfg->parent)
+		adev = NULL;
+	else
+		adev = to_acpi_device(cfg->parent);
+
+	bus_dev = &bridge->bus->dev;
+
+	ACPI_COMPANION_SET(&bridge->dev, adev);
+	set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
+
+	return 0;
+}
+
+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
+{
+	struct resource_entry *entry, *tmp;
+	int status;
+
+	status = acpi_pci_probe_root_resources(ci);
+	resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
+		if (!(entry->res->flags & IORESOURCE_WINDOW))
+			resource_list_destroy_entry(entry);
+	}
+	return status;
+}
+
+/*
+ * Lookup the bus range for the domain in MCFG, and set up config space
+ * mapping.
+ */
+static struct pci_config_window *
+pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
+{
+	struct device *dev = &root->device->dev;
+	struct resource *bus_res = &root->secondary;
+	u16 seg = root->segment;
+	const struct pci_ecam_ops *ecam_ops;
+	struct resource cfgres;
+	struct acpi_device *adev;
+	struct pci_config_window *cfg;
+	int ret;
+
+	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
+	if (ret) {
+		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
+		return NULL;
+	}
+
+	adev = acpi_resource_consumer(&cfgres);
+	if (adev)
+		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
+			 dev_name(&adev->dev));
+	else
+		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
+			 &cfgres);
+
+	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
+	if (IS_ERR(cfg)) {
+		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
+			PTR_ERR(cfg));
+		return NULL;
+	}
+
+	return cfg;
+}
+
+/* release_info: free resources allocated by init_info */
+static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
+{
+	struct acpi_pci_generic_root_info *ri;
+
+	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
+	pci_ecam_free(ri->cfg);
+	kfree(ci->ops);
+	kfree(ri);
+}
+
+/* Interface called from ACPI code to setup PCI host controller */
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+{
+	struct acpi_pci_generic_root_info *ri;
+	struct pci_bus *bus, *child;
+	struct acpi_pci_root_ops *root_ops;
+	struct pci_host_bridge *host;
+
+	ri = kzalloc(sizeof(*ri), GFP_KERNEL);
+	if (!ri)
+		return NULL;
+
+	root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
+	if (!root_ops) {
+		kfree(ri);
+		return NULL;
+	}
+
+	ri->cfg = pci_acpi_setup_ecam_mapping(root);
+	if (!ri->cfg) {
+		kfree(ri);
+		kfree(root_ops);
+		return NULL;
+	}
+
+	root_ops->release_info = pci_acpi_generic_release_info;
+	root_ops->prepare_resources = pci_acpi_root_prepare_resources;
+	root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
+	bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
+	if (!bus)
+		return NULL;
+
+	/* If we must preserve the resource configuration, claim now */
+	host = pci_find_host_bridge(bus);
+	if (host->preserve_config)
+		pci_bus_claim_resources(bus);
+
+	/*
+	 * Assign whatever was left unassigned. If we didn't claim above,
+	 * this will reassign everything.
+	 */
+	pci_assign_unassigned_root_bus_resources(bus);
+
+	list_for_each_entry(child, &bus->children, node)
+		pcie_bus_configure_settings(child);
+
+	return bus;
+}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+	acpi_pci_remove_bus(bus);
+}
+
+#endif