| Message ID | 20240215111455.1462-10-shiju.jose@huawei.com |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Thu, 15 Feb 2024 19:14:51 +0800 <shiju.jose@huawei.com> wrote: > From: A Somasundaram <somasundaram.a@hpe.com> > > The code contains PCC interfaces for RASF and RAS2 table, functions to send > RASF commands as per ACPI 5.1 and RAS2 commands as per ACPI 6.5 & upwards > revision. > > References for this implementation, > ACPI specification 6.5, section 5.2.20 for RASF table, section 5.2.21 for RAS2 > table and chapter 14 for PCC (Platform Communication Channel). > > Driver uses PCC interfaces to communicate to the ACPI HW. > This code implements PCC interfaces and the functions to send the RASF/RAS2 > commands to be used by OSPM. > > Signed-off-by: A Somasundaram <somasundaram.a@hpe.com> > Co-developed-by: Shiju Jose <shiju.jose@huawei.com> > Signed-off-by: Shiju Jose <shiju.jose@huawei.com> I looked at this in depth a while back so this time a quicker review. Just some trivial stuff inline. > diff --git a/drivers/acpi/rasf_acpi_common.c b/drivers/acpi/rasf_acpi_common.c > new file mode 100755 > index 000000000000..3ee34f5d12d3 > --- /dev/null > +++ b/drivers/acpi/rasf_acpi_common.c > @@ -0,0 +1,272 @@ ... > + > +#include <linux/export.h> > +#include <linux/delay.h> > +#include <linux/ktime.h> > +#include <linux/platform_device.h> > +#include <acpi/rasf_acpi.h> > +#include <acpi/acpixf.h> > + > +static int rasf_check_pcc_chan(struct rasf_context *rasf_ctx) > +{ > + int ret = -EIO; > + struct acpi_rasf_shared_memory __iomem *generic_comm_base = rasf_ctx->pcc_comm_addr; > + ktime_t next_deadline = ktime_add(ktime_get(), rasf_ctx->deadline); > + > + while (!ktime_after(ktime_get(), next_deadline)) { > + /* > + * As per ACPI spec, the PCC space wil be initialized by > + * platform and should have set the command completion bit when > + * PCC can be used by OSPM > + */ > + if (readw_relaxed(&generic_comm_base->status) & RASF_PCC_CMD_COMPLETE) { > + ret = 0; return 0; > + break; > + } > + /* > + * Reducing the bus traffic in case this loop takes longer than > + * a few retries. > + */ > + udelay(10); > + } > + > + return ret; return -EIO; > +} > + > +/** > + * rasf_send_pcc_cmd() - Send RASF command via PCC channel > + * @rasf_ctx: pointer to the rasf context structure > + * @cmd: command to send > + * > + * Returns: 0 on success, an error otherwise > + */ > +int rasf_send_pcc_cmd(struct rasf_context *rasf_ctx, u16 cmd) > +{ > + int ret = -EIO; Looks like it's overwritten in all paths where ret is used. > + struct acpi_rasf_shared_memory *generic_comm_base = > + (struct acpi_rasf_shared_memory *)rasf_ctx->pcc_comm_addr; > + static ktime_t last_cmd_cmpl_time, last_mpar_reset; > + static int mpar_count; > + unsigned int time_delta; > + > + if (cmd == RASF_PCC_CMD_EXEC) { > + ret = rasf_check_pcc_chan(rasf_ctx); > + if (ret) > + return ret; > + } > + > + /* > + * Handle the Minimum Request Turnaround Time(MRTT) > + * "The minimum amount of time that OSPM must wait after the completion > + * of a command before issuing the next command, in microseconds" > + */ > + if (rasf_ctx->pcc_mrtt) { > + time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time); > + if (rasf_ctx->pcc_mrtt > time_delta) > + udelay(rasf_ctx->pcc_mrtt - time_delta); > + } > + > + /* > + * Handle the non-zero Maximum Periodic Access Rate(MPAR) > + * "The maximum number of periodic requests that the subspace channel can > + * support, reported in commands per minute. 0 indicates no limitation." > + * > + * This parameter should be ideally zero or large enough so that it can > + * handle maximum number of requests that all the cores in the system can > + * collectively generate. If it is not, we will follow the spec and just > + * not send the request to the platform after hitting the MPAR limit in > + * any 60s window > + */ > + if (rasf_ctx->pcc_mpar) { > + if (mpar_count == 0) { > + time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset); > + if (time_delta < 60 * MSEC_PER_SEC) { > + pr_debug("PCC cmd not sent due to MPAR limit"); > + return -EIO; > + } > + last_mpar_reset = ktime_get(); > + mpar_count = rasf_ctx->pcc_mpar; > + } > + mpar_count--; > + } > + > + /* Write to the shared comm region. */ > + writew_relaxed(cmd, &generic_comm_base->command); > + > + /* Flip CMD COMPLETE bit */ > + writew_relaxed(0, &generic_comm_base->status); > + > + /* Ring doorbell */ > + ret = mbox_send_message(rasf_ctx->pcc_channel, &cmd); > + if (ret < 0) { > + pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n", > + cmd, ret); > + return ret; > + } > + > + /* > + * For READs we need to ensure the cmd completed to ensure > + * the ensuing read()s can proceed. For WRITEs we dont care > + * because the actual write()s are done before coming here > + * and the next READ or WRITE will check if the channel > + * is busy/free at the entry of this call. > + * > + * If Minimum Request Turnaround Time is non-zero, we need > + * to record the completion time of both READ and WRITE > + * command for proper handling of MRTT, so we need to check > + * for pcc_mrtt in addition to CMD_READ > + */ > + if (cmd == RASF_PCC_CMD_EXEC || rasf_ctx->pcc_mrtt) { > + ret = rasf_check_pcc_chan(rasf_ctx); > + if (rasf_ctx->pcc_mrtt) > + last_cmd_cmpl_time = ktime_get(); > + } > + > + if (rasf_ctx->pcc_channel->mbox->txdone_irq) > + mbox_chan_txdone(rasf_ctx->pcc_channel, ret); > + else > + mbox_client_txdone(rasf_ctx->pcc_channel, ret); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(rasf_send_pcc_cmd); > + > +/** > + * rasf_register_pcc_channel() - Register PCC channel > + * @rasf_ctx: pointer to the rasf context structure > + * > + * Returns: 0 on success, an error otherwise > + */ > +int rasf_register_pcc_channel(struct rasf_context *rasf_ctx) > +{ > + u64 usecs_lat; > + unsigned int len; > + struct pcc_mbox_chan *pcc_chan; > + struct mbox_client *rasf_mbox_cl; > + struct acpi_pcct_hw_reduced *rasf_ss; > + > + rasf_mbox_cl = &rasf_ctx->mbox_client; > + if (!rasf_mbox_cl || rasf_ctx->pcc_subspace_idx < 0) > + return -EINVAL; > + > + pcc_chan = pcc_mbox_request_channel(rasf_mbox_cl, > + rasf_ctx->pcc_subspace_idx); > + > + if (IS_ERR(pcc_chan)) { > + pr_err("Failed to find PCC channel for subspace %d\n", > + rasf_ctx->pcc_subspace_idx); > + return -ENODEV; > + } > + rasf_ctx->pcc_chan = pcc_chan; If you are storing the chan, why do we need to sparately store mchan? > + rasf_ctx->pcc_channel = pcc_chan->mchan; > + /* > + * The PCC mailbox controller driver should > + * have parsed the PCCT (global table of all > + * PCC channels) and stored pointers to the > + * subspace communication region in con_priv. > + */ > + rasf_ss = rasf_ctx->pcc_channel->con_priv; > + > + if (!rasf_ss) { > + pr_err("No PCC subspace found for RASF\n"); > + pcc_mbox_free_channel(rasf_ctx->pcc_chan); > + return -ENODEV; > + } > + > + /* > + * This is the shared communication region > + * for the OS and Platform to communicate over. > + */ > + rasf_ctx->comm_base_addr = rasf_ss->base_address; > + len = rasf_ss->length; > + pr_debug("PCC subspace for RASF=0x%llx len=%d\n", > + rasf_ctx->comm_base_addr, len); dev_dbg(rasf_ctx->dev ... throughout probably better. > + > + /* > + * rasf_ss->latency is just a Nominal value. In reality > + * the remote processor could be much slower to reply. > + * So add an arbitrary amount of wait on top of Nominal. > + */ > + usecs_lat = RASF_NUM_RETRIES * rasf_ss->latency; > + rasf_ctx->deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC); > + rasf_ctx->pcc_mrtt = rasf_ss->min_turnaround_time; > + rasf_ctx->pcc_mpar = rasf_ss->max_access_rate; > + rasf_ctx->pcc_comm_addr = acpi_os_ioremap(rasf_ctx->comm_base_addr, len); > + pr_debug("pcc_comm_addr=%p\n", rasf_ctx->pcc_comm_addr); > + > + /* Set flag so that we dont come here for each CPU. */ > + rasf_ctx->pcc_channel_acquired = true; > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rasf_register_pcc_channel); > +/** > + * rasf_add_platform_device() - Add a platform device for RASF > + * @name: name of the device we're adding > + * @data: platform specific data for this platform device > + * @size: size of platform specific data > + * > + * Returns: pointer to platform device on success, an error otherwise I wonder if we should just rename this to ras2 and ignore the fact it came form rasf? > + */ > +struct platform_device *rasf_add_platform_device(char *name, const void *data, > + size_t size) > +{ > + int ret; > + struct platform_device *pdev; > + > + pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO); > + if (!pdev) > + return NULL; > + > + ret = platform_device_add_data(pdev, data, size); > + if (ret) > + goto dev_put; > + > + ret = platform_device_add(pdev); > + if (ret) > + goto dev_put; > + > + return pdev; > + > +dev_put: > + platform_device_put(pdev); > + > + return NULL; Could return an error pointer to provide more info from ret? > +} > diff --git a/include/acpi/rasf_acpi.h b/include/acpi/rasf_acpi.h > new file mode 100644 > index 000000000000..aa4f935b28cf > --- /dev/null > +++ b/include/acpi/rasf_acpi.h > @@ -0,0 +1,58 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * RASF driver header file > + * > + * (C) Copyright 2014, 2015 Hewlett-Packard Enterprises > + * > + * Copyright (c) 2023 HiSilicon Limited > + */ > + > +#ifndef _RASF_ACPI_H > +#define _RASF_ACPI_H > + > +#include <linux/acpi.h> > +#include <linux/mailbox_client.h> > +#include <linux/mailbox_controller.h> > +#include <linux/types.h> > +#include <acpi/pcc.h> > + > +#define RASF_PCC_CMD_COMPLETE 1 > + > +/* RASF specific PCC commands */ > +#define RASF_PCC_CMD_EXEC 0x01 > + > +#define RASF_FAILURE 0 > +#define RASF_SUCCESS 1 > + > +/* > + * Arbitrary Retries for PCC commands. Perhaps a comment on why PCC retry might be needed? > + */ > +#define RASF_NUM_RETRIES 600 > + > +/* > + * Data structures for PCC communication and RASF table > + */ > +struct rasf_context { > + struct device *dev; > + int id; > + struct mbox_client mbox_client; > + struct mbox_chan *pcc_channel; > + struct pcc_mbox_chan *pcc_chan; > + void __iomem *pcc_comm_addr; > + u64 comm_base_addr; > + int pcc_subspace_idx; > + bool pcc_channel_acquired; > + ktime_t deadline; Perhaps move all the pcc channel specific stuff to a named struct struct { unsigned int mpar; unsigned int mrtt; } pcc; > + unsigned int pcc_mpar; > + unsigned int pcc_mrtt; > + spinlock_t spinlock; /* Lock to provide mutually exclusive access to PCC channel */ Move comment to line above. Saves on long line without loss of readability. > + struct device *scrub_dev; > + const struct rasf_hw_scrub_ops *ops; > +};
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 3c3f8037ebed..4b7ebfede625 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -284,6 +284,21 @@ config ACPI_CPPC_LIB If your platform does not support CPPC in firmware, leave this option disabled. +config ACPI_RASF + bool "ACPI RASF driver" + depends on ACPI_PROCESSOR + select MAILBOX + select PCC + help + The driver adds support for PCC (platform communication + channel) interfaces to communicate with the ACPI complaint + hardware platform supports RASF(RAS Feature table) or + and RAS2(RAS2 Feature table). + The driver adds support for RASF/RAS2(extraction of RASF/RAS2 + tables from OS system table), PCC interfaces and OSPM interfaces + to send RASF & RAS2 commands. Driver adds platform device which + binds to the RASF/RAS2 memory driver. + config ACPI_PROCESSOR tristate "Processor" depends on X86 || ARM64 || LOONGARCH diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 12ef8180d272..5c984c13de78 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -105,6 +105,7 @@ obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o obj-$(CONFIG_ACPI_BGRT) += bgrt.o obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o +obj-$(CONFIG_ACPI_RASF) += rasf_acpi_common.o obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o obj-$(CONFIG_ACPI_PPTT) += pptt.o obj-$(CONFIG_ACPI_PFRUT) += pfr_update.o pfr_telemetry.o diff --git a/drivers/acpi/rasf_acpi_common.c b/drivers/acpi/rasf_acpi_common.c new file mode 100755 index 000000000000..3ee34f5d12d3 --- /dev/null +++ b/drivers/acpi/rasf_acpi_common.c @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * rasf_acpi_common.c - ACPI RASF table processing common functions + * + * (C) Copyright 2014, 2015 Hewlett-Packard Enterprises. + * + * Copyright (c) 2023 HiSilicon Limited. + * + * Support for + * RASF - ACPI 6.5 Specification, section 5.2.20 + * RAS2 - ACPI 6.5 Specification, section 5.2.21 + * PCC(Platform Communications Channel) - ACPI 6.5 Specification, + * chapter 14. + * + * Code contains common functions for RASF. + * PCC(Platform communication channel) interfaces for the RASF & RAS2 + * and the functions for sending RASF & RAS2 commands to the ACPI HW. + */ + +#define pr_fmt(fmt) "ACPI RASF COMMON: " fmt + +#include <linux/export.h> +#include <linux/delay.h> +#include <linux/ktime.h> +#include <linux/platform_device.h> +#include <acpi/rasf_acpi.h> +#include <acpi/acpixf.h> + +static int rasf_check_pcc_chan(struct rasf_context *rasf_ctx) +{ + int ret = -EIO; + struct acpi_rasf_shared_memory __iomem *generic_comm_base = rasf_ctx->pcc_comm_addr; + ktime_t next_deadline = ktime_add(ktime_get(), rasf_ctx->deadline); + + while (!ktime_after(ktime_get(), next_deadline)) { + /* + * As per ACPI spec, the PCC space wil be initialized by + * platform and should have set the command completion bit when + * PCC can be used by OSPM + */ + if (readw_relaxed(&generic_comm_base->status) & RASF_PCC_CMD_COMPLETE) { + ret = 0; + break; + } + /* + * Reducing the bus traffic in case this loop takes longer than + * a few retries. + */ + udelay(10); + } + + return ret; +} + +/** + * rasf_send_pcc_cmd() - Send RASF command via PCC channel + * @rasf_ctx: pointer to the rasf context structure + * @cmd: command to send + * + * Returns: 0 on success, an error otherwise + */ +int rasf_send_pcc_cmd(struct rasf_context *rasf_ctx, u16 cmd) +{ + int ret = -EIO; + struct acpi_rasf_shared_memory *generic_comm_base = + (struct acpi_rasf_shared_memory *)rasf_ctx->pcc_comm_addr; + static ktime_t last_cmd_cmpl_time, last_mpar_reset; + static int mpar_count; + unsigned int time_delta; + + if (cmd == RASF_PCC_CMD_EXEC) { + ret = rasf_check_pcc_chan(rasf_ctx); + if (ret) + return ret; + } + + /* + * Handle the Minimum Request Turnaround Time(MRTT) + * "The minimum amount of time that OSPM must wait after the completion + * of a command before issuing the next command, in microseconds" + */ + if (rasf_ctx->pcc_mrtt) { + time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time); + if (rasf_ctx->pcc_mrtt > time_delta) + udelay(rasf_ctx->pcc_mrtt - time_delta); + } + + /* + * Handle the non-zero Maximum Periodic Access Rate(MPAR) + * "The maximum number of periodic requests that the subspace channel can + * support, reported in commands per minute. 0 indicates no limitation." + * + * This parameter should be ideally zero or large enough so that it can + * handle maximum number of requests that all the cores in the system can + * collectively generate. If it is not, we will follow the spec and just + * not send the request to the platform after hitting the MPAR limit in + * any 60s window + */ + if (rasf_ctx->pcc_mpar) { + if (mpar_count == 0) { + time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset); + if (time_delta < 60 * MSEC_PER_SEC) { + pr_debug("PCC cmd not sent due to MPAR limit"); + return -EIO; + } + last_mpar_reset = ktime_get(); + mpar_count = rasf_ctx->pcc_mpar; + } + mpar_count--; + } + + /* Write to the shared comm region. */ + writew_relaxed(cmd, &generic_comm_base->command); + + /* Flip CMD COMPLETE bit */ + writew_relaxed(0, &generic_comm_base->status); + + /* Ring doorbell */ + ret = mbox_send_message(rasf_ctx->pcc_channel, &cmd); + if (ret < 0) { + pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n", + cmd, ret); + return ret; + } + + /* + * For READs we need to ensure the cmd completed to ensure + * the ensuing read()s can proceed. For WRITEs we dont care + * because the actual write()s are done before coming here + * and the next READ or WRITE will check if the channel + * is busy/free at the entry of this call. + * + * If Minimum Request Turnaround Time is non-zero, we need + * to record the completion time of both READ and WRITE + * command for proper handling of MRTT, so we need to check + * for pcc_mrtt in addition to CMD_READ + */ + if (cmd == RASF_PCC_CMD_EXEC || rasf_ctx->pcc_mrtt) { + ret = rasf_check_pcc_chan(rasf_ctx); + if (rasf_ctx->pcc_mrtt) + last_cmd_cmpl_time = ktime_get(); + } + + if (rasf_ctx->pcc_channel->mbox->txdone_irq) + mbox_chan_txdone(rasf_ctx->pcc_channel, ret); + else + mbox_client_txdone(rasf_ctx->pcc_channel, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(rasf_send_pcc_cmd); + +/** + * rasf_register_pcc_channel() - Register PCC channel + * @rasf_ctx: pointer to the rasf context structure + * + * Returns: 0 on success, an error otherwise + */ +int rasf_register_pcc_channel(struct rasf_context *rasf_ctx) +{ + u64 usecs_lat; + unsigned int len; + struct pcc_mbox_chan *pcc_chan; + struct mbox_client *rasf_mbox_cl; + struct acpi_pcct_hw_reduced *rasf_ss; + + rasf_mbox_cl = &rasf_ctx->mbox_client; + if (!rasf_mbox_cl || rasf_ctx->pcc_subspace_idx < 0) + return -EINVAL; + + pcc_chan = pcc_mbox_request_channel(rasf_mbox_cl, + rasf_ctx->pcc_subspace_idx); + + if (IS_ERR(pcc_chan)) { + pr_err("Failed to find PCC channel for subspace %d\n", + rasf_ctx->pcc_subspace_idx); + return -ENODEV; + } + rasf_ctx->pcc_chan = pcc_chan; + rasf_ctx->pcc_channel = pcc_chan->mchan; + /* + * The PCC mailbox controller driver should + * have parsed the PCCT (global table of all + * PCC channels) and stored pointers to the + * subspace communication region in con_priv. + */ + rasf_ss = rasf_ctx->pcc_channel->con_priv; + + if (!rasf_ss) { + pr_err("No PCC subspace found for RASF\n"); + pcc_mbox_free_channel(rasf_ctx->pcc_chan); + return -ENODEV; + } + + /* + * This is the shared communication region + * for the OS and Platform to communicate over. + */ + rasf_ctx->comm_base_addr = rasf_ss->base_address; + len = rasf_ss->length; + pr_debug("PCC subspace for RASF=0x%llx len=%d\n", + rasf_ctx->comm_base_addr, len); + + /* + * rasf_ss->latency is just a Nominal value. In reality + * the remote processor could be much slower to reply. + * So add an arbitrary amount of wait on top of Nominal. + */ + usecs_lat = RASF_NUM_RETRIES * rasf_ss->latency; + rasf_ctx->deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC); + rasf_ctx->pcc_mrtt = rasf_ss->min_turnaround_time; + rasf_ctx->pcc_mpar = rasf_ss->max_access_rate; + rasf_ctx->pcc_comm_addr = acpi_os_ioremap(rasf_ctx->comm_base_addr, len); + pr_debug("pcc_comm_addr=%p\n", rasf_ctx->pcc_comm_addr); + + /* Set flag so that we dont come here for each CPU. */ + rasf_ctx->pcc_channel_acquired = true; + + return 0; +} +EXPORT_SYMBOL_GPL(rasf_register_pcc_channel); + +/** + * rasf_unregister_pcc_channel() - Unregister PCC channel + * @rasf_ctx: pointer to the rasf context structure + * + * Returns: 0 on success, an error otherwise + */ +int rasf_unregister_pcc_channel(struct rasf_context *rasf_ctx) +{ + if (!rasf_ctx->pcc_chan) + return -EINVAL; + + pcc_mbox_free_channel(rasf_ctx->pcc_chan); + + return 0; +} +EXPORT_SYMBOL_GPL(rasf_unregister_pcc_channel); + +/** + * rasf_add_platform_device() - Add a platform device for RASF + * @name: name of the device we're adding + * @data: platform specific data for this platform device + * @size: size of platform specific data + * + * Returns: pointer to platform device on success, an error otherwise + */ +struct platform_device *rasf_add_platform_device(char *name, const void *data, + size_t size) +{ + int ret; + struct platform_device *pdev; + + pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO); + if (!pdev) + return NULL; + + ret = platform_device_add_data(pdev, data, size); + if (ret) + goto dev_put; + + ret = platform_device_add(pdev); + if (ret) + goto dev_put; + + return pdev; + +dev_put: + platform_device_put(pdev); + + return NULL; +} diff --git a/include/acpi/rasf_acpi.h b/include/acpi/rasf_acpi.h new file mode 100644 index 000000000000..aa4f935b28cf --- /dev/null +++ b/include/acpi/rasf_acpi.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * RASF driver header file + * + * (C) Copyright 2014, 2015 Hewlett-Packard Enterprises + * + * Copyright (c) 2023 HiSilicon Limited + */ + +#ifndef _RASF_ACPI_H +#define _RASF_ACPI_H + +#include <linux/acpi.h> +#include <linux/mailbox_client.h> +#include <linux/mailbox_controller.h> +#include <linux/types.h> +#include <acpi/pcc.h> + +#define RASF_PCC_CMD_COMPLETE 1 + +/* RASF specific PCC commands */ +#define RASF_PCC_CMD_EXEC 0x01 + +#define RASF_FAILURE 0 +#define RASF_SUCCESS 1 + +/* + * Arbitrary Retries for PCC commands. + */ +#define RASF_NUM_RETRIES 600 + +/* + * Data structures for PCC communication and RASF table + */ +struct rasf_context { + struct device *dev; + int id; + struct mbox_client mbox_client; + struct mbox_chan *pcc_channel; + struct pcc_mbox_chan *pcc_chan; + void __iomem *pcc_comm_addr; + u64 comm_base_addr; + int pcc_subspace_idx; + bool pcc_channel_acquired; + ktime_t deadline; + unsigned int pcc_mpar; + unsigned int pcc_mrtt; + spinlock_t spinlock; /* Lock to provide mutually exclusive access to PCC channel */ + struct device *scrub_dev; + const struct rasf_hw_scrub_ops *ops; +}; + +struct platform_device *rasf_add_platform_device(char *name, const void *data, + size_t size); +int rasf_send_pcc_cmd(struct rasf_context *rasf_ctx, u16 cmd); +int rasf_register_pcc_channel(struct rasf_context *rasf_ctx); +int rasf_unregister_pcc_channel(struct rasf_context *rasf_ctx); +#endif /* _RASF_ACPI_H */