From patchwork Wed Jun 27 04:51:55 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rob X-Patchwork-Id: 9644 Return-Path: X-Original-To: patchwork@peony.canonical.com Delivered-To: patchwork@peony.canonical.com Received: from fiordland.canonical.com (fiordland.canonical.com [91.189.94.145]) by peony.canonical.com (Postfix) with ESMTP id A431923EE3 for ; Wed, 27 Jun 2012 04:52:17 +0000 (UTC) Received: from mail-gh0-f180.google.com (mail-gh0-f180.google.com [209.85.160.180]) by fiordland.canonical.com (Postfix) with ESMTP id 57CDFA18737 for ; Wed, 27 Jun 2012 04:52:17 +0000 (UTC) Received: by ghbz12 with SMTP id z12so691920ghb.11 for ; Tue, 26 Jun 2012 21:52:16 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-forwarded-to:x-forwarded-for:delivered-to:received-spf:from:to:cc :subject:date:message-id:x-mailer:in-reply-to:references :x-gm-message-state; bh=hFVUD5YoUQ+7qdcmPoyNT85MuQv7D0NX8A0agW6Q7sM=; b=nu7fmfB7wWTNTrrF+a0XKml/FqYw0rsnSAIvhFy9WCNvIAg99TYjz1U0QUZ/WCuWcL qBfGCDRIvdccmk1eUP/y8XnqepAYt4rLab/jsxA7BwBV3hLEz1kGF9pI6IoMfztxY2Sc o9TYyhsChSP1Rkt0cq+XYezxv8/BYlACx8ITYOB9DrGchGGpQveO+neK/GGOT4M+eswK yq5Yp5yuocG0UxkCrKKDlK4zZIFPwLq2VV4sTv9AUSTniInNqjKELwQvD/TlRa/ExOQH HyI+vA3mkmV9CQHz4C0dQbfFjODNx1uzqUhRXoSgUk+CGt7izwZAjG7xl72Id9EcsiCU 1jUw== Received: by 10.50.40.193 with SMTP id z1mr379122igk.0.1340772736281; Tue, 26 Jun 2012 21:52:16 -0700 (PDT) X-Forwarded-To: linaro-patchwork@canonical.com X-Forwarded-For: patch@linaro.org linaro-patchwork@canonical.com Delivered-To: patches@linaro.org Received: by 10.231.24.148 with SMTP id v20csp2060ibb; Tue, 26 Jun 2012 21:52:15 -0700 (PDT) Received: by 10.236.177.1 with SMTP id c1mr16186167yhm.41.1340772735169; Tue, 26 Jun 2012 21:52:15 -0700 (PDT) Received: from mail-yw0-f44.google.com (mail-yw0-f44.google.com [209.85.213.44]) by mx.google.com with ESMTPS id y13si600238anl.97.2012.06.26.21.52.15 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 26 Jun 2012 21:52:15 -0700 (PDT) Received-SPF: neutral (google.com: 209.85.213.44 is neither permitted nor denied by best guess record for domain of rob.lee@linaro.org) client-ip=209.85.213.44; Authentication-Results: mx.google.com; spf=neutral (google.com: 209.85.213.44 is neither permitted nor denied by best guess record for domain of rob.lee@linaro.org) smtp.mail=rob.lee@linaro.org Received: by yhq56 with SMTP id 56so708821yhq.17 for ; Tue, 26 Jun 2012 21:52:14 -0700 (PDT) Received: by 10.50.189.228 with SMTP id gl4mr331898igc.43.1340772734644; Tue, 26 Jun 2012 21:52:14 -0700 (PDT) Received: from localhost.localdomain ([67.23.168.69]) by mx.google.com with ESMTPS id g5sm4224044ign.4.2012.06.26.21.52.09 (version=SSLv3 cipher=OTHER); Tue, 26 Jun 2012 21:52:13 -0700 (PDT) From: Robert Lee To: kernel@pengutronix.de, shawn.guo@linaro.org Cc: linux@arm.linux.org.uk, richard.zhao@freescale.com, dirk.behme@de.bosch.com, amit.kachhap@linaro.org, amit.kucheria@linaro.org, lenb@kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linaro-dev@lists.linaro.org, patches@linaro.org Subject: [PATCH v6] ARM: imx: Add basic imx6q thermal driver Date: Tue, 26 Jun 2012 23:51:55 -0500 Message-Id: <1340772715-22117-2-git-send-email-rob.lee@linaro.org> X-Mailer: git-send-email 1.7.10 In-Reply-To: <1340772715-22117-1-git-send-email-rob.lee@linaro.org> References: <1340772715-22117-1-git-send-email-rob.lee@linaro.org> X-Gm-Message-State: ALoCoQlUSMfTdKPKVFG2uJ6Xf1QKaAjuDoa+aMfqKTNCT7se1i51liP42OHA9HiJI+whl93X1Cvi Add imx anatop peripheral thermal driver and use it for imx6q builds. This driver hooks into the linux thermal framework which provides a sysfs interface for temperature readings and other information and a mechanism to shutdown the system upon crossing a critical temperature trip point. Only the sysfs interface and a critcial trip are supported by this patch and not any active trip points or cooling devices. The thermal driver is defaulted to be enabled which required the anatopmfd driver to be defaulted to enabled. Signed-off-by: Robert Lee --- arch/arm/boot/dts/imx6q.dtsi | 5 + drivers/mfd/Kconfig | 1 + drivers/thermal/Kconfig | 9 + drivers/thermal/Makefile | 1 + drivers/thermal/imx_anatop_thermal.c | 465 ++++++++++++++++++++++++++++++++++ 5 files changed, 481 insertions(+) create mode 100644 drivers/thermal/imx_anatop_thermal.c diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index d026f30..b53a16a 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -449,6 +449,10 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + thermal { + compatible ="fsl,anatop-thermal"; + }; }; usbphy@020c9000 { /* USBPHY1 */ @@ -666,6 +670,7 @@ }; ocotp@021bc000 { + compatible = "fsl,imx6q-ocotp"; reg = <0x021bc000 0x4000>; }; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index e129c82..552fae3 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -915,6 +915,7 @@ config MFD_STA2X11 config MFD_ANATOP bool "Support for Freescale i.MX on-chip ANATOP controller" depends on SOC_IMX6Q + default y help Select this option to enable Freescale i.MX on-chip ANATOP MFD controller. This controller embeds regulator and diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 04c6796..a35a35e 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -30,6 +30,15 @@ config CPU_THERMAL and not the ACPI interface. If you want this support, you should say Y or M here. +config IMX_ANATOP_THERMAL + bool "imx anatop soc thermal driver" + depends on MFD_ANATOP && CPU_THERMAL + default y + help + Enable the on-chip temperature sensor and register the linux thermal + framework to provide SoC temperature data to sysfs and a basic + shutdown mechanism to prevent the SoC from overheating. + config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on THERMAL diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 4636e35..4dd4570 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_THERMAL) += thermal_sys.o obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o +obj-$(CONFIG_IMX_ANATOP_THERMAL) += imx_anatop_thermal.o diff --git a/drivers/thermal/imx_anatop_thermal.c b/drivers/thermal/imx_anatop_thermal.c new file mode 100644 index 0000000..a932fe8 --- /dev/null +++ b/drivers/thermal/imx_anatop_thermal.c @@ -0,0 +1,465 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * Thermal driver for i.MX anatop systems. Implented by hooking in to the + * linux thermal framework. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* register define of anatop */ +#define HW_ANADIG_ANA_MISC0 0x00000150 +#define HW_ANADIG_ANA_MISC0_SET 0x00000154 +#define HW_ANADIG_ANA_MISC0_CLR 0x00000158 +#define HW_ANADIG_ANA_MISC0_TOG 0x0000015c +#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008 + +#define HW_ANADIG_TEMPSENSE0 0x00000180 +#define HW_ANADIG_TEMPSENSE0_SET 0x00000184 +#define HW_ANADIG_TEMPSENSE0_CLR 0x00000188 +#define HW_ANADIG_TEMPSENSE0_TOG 0x0000018c + +#define BP_ANADIG_TEMPSENSE0_TEMP_VALUE 8 +#define BM_ANADIG_TEMPSENSE0_TEMP_VALUE 0x000FFF00 +#define BM_ANADIG_TEMPSENSE0_FINISHED 0x00000004 +#define BM_ANADIG_TEMPSENSE0_MEASURE_TEMP 0x00000002 +#define BM_ANADIG_TEMPSENSE0_POWER_DOWN 0x00000001 + +#define HW_ANADIG_TEMPSENSE1 0x00000190 +#define HW_ANADIG_TEMPSENSE1_SET 0x00000194 +#define HW_ANADIG_TEMPSENSE1_CLR 0x00000198 +#define BP_ANADIG_TEMPSENSE1_MEASURE_FREQ 0 +#define BM_ANADIG_TEMPSENSE1_MEASURE_FREQ 0x0000FFFF + +#define HW_OCOTP_ANA1 0x000004E0 + +#define IMX_THERMAL_POLLING_FREQUENCY_MS 1000 + +#define IMX_ANATOP_TS_NOISE_MARGIN 3000 /* in millicelsius */ +#define IMX_ANATOP_TS_NOISE_COUNT 3 + +/* anatop temperature sensor data */ +struct imx_anatop_tsdata { + int c1, c2; + u32 noise_margin; /* in millicelsius */ + int last_temp; /* in millicelsius */ + /* + * When filtering noise, if consecutive measurements are each higher + * up to consec_high_limit times, assume changing temperature readings + * to be valid and not noise. + */ + u32 consec_high_limit; + bool handle_suspend; + struct anatop *anatopmfd; + +}; + +struct imx_anatop_thdata { + struct thermal_zone_device *tzdev; + struct imx_anatop_tsdata sensor_data; + struct thermal_zone_device_ops dev_ops; + unsigned int crit_temp_level; + void __iomem *ocotp_base; +}; + +static inline int anatop_get_temp(int *temp, struct thermal_zone_device *tzdev) +{ + unsigned int n_meas; + unsigned int reg; + struct imx_anatop_tsdata *sd; + + sd = &((struct imx_anatop_thdata *)tzdev->devdata)->sensor_data; + + + do { + /* + * Every time we measure the temperature, we will power on the + * temperature sensor, enable measurements, take a reading, + * disable measurements, power off the temperature sensor. + */ + sd->handle_suspend = false; + + anatop_write_reg(sd->anatopmfd, HW_ANADIG_TEMPSENSE0, 0, + BM_ANADIG_TEMPSENSE0_POWER_DOWN); + anatop_write_reg(sd->anatopmfd, HW_ANADIG_TEMPSENSE0, + BM_ANADIG_TEMPSENSE0_MEASURE_TEMP, + BM_ANADIG_TEMPSENSE0_MEASURE_TEMP); + /* + * According to the anatop temp sensor designers, it may require + * up to ~17us to complete a measurement (imx6q). + * But this timing isn't checked on every part nor is it + * specified in the datasheet, so sleeping at least 1ms should + * provide plenty of time. Sleeping longer than 1ms is ok so no + * need for usleep_range */ + msleep(1); + + reg = anatop_read_reg(sd->anatopmfd, HW_ANADIG_TEMPSENSE0); + + anatop_write_reg(sd->anatopmfd, HW_ANADIG_TEMPSENSE0, 0, + BM_ANADIG_TEMPSENSE0_MEASURE_TEMP); + anatop_write_reg(sd->anatopmfd, HW_ANADIG_TEMPSENSE0, + BM_ANADIG_TEMPSENSE0_POWER_DOWN, + BM_ANADIG_TEMPSENSE0_POWER_DOWN); + + /* if we had a suspend and resume event, we will re-take the reading */ + } while (sd->handle_suspend); + + if (!(reg & BM_ANADIG_TEMPSENSE0_FINISHED) && + (reg & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)) { + dev_dbg(&tzdev->device, + "Temp sensor error: reading never finished"); + return -EAGAIN; + } + + n_meas = (reg & BM_ANADIG_TEMPSENSE0_TEMP_VALUE) + >> BP_ANADIG_TEMPSENSE0_TEMP_VALUE; + + /* See anatop_process_ts_fuse_data() for forumla derivation. */ + *temp = sd->c2 + (sd->c1 * n_meas); + + dev_dbg(&tzdev->device, "Temperature: %d\n", *temp / 1000); + return 0; +} + +static int th_sys_get_temp(struct thermal_zone_device *tzdev, + unsigned long *temp) +{ + int i, total = 0, tmp = 0; + const u8 loop = 5; + u32 consec_high = 0; + + struct imx_anatop_tsdata *sd; + + sd = &((struct imx_anatop_thdata *)tzdev->devdata)->sensor_data; + + /* + * Measure temperature and handle noise + * + * While the anatop temperature sensor is designed to minimize being + * affected by system noise, it's safest to run sanity checks and + * perform any necessary filtering, if a noise_margin has been defined. + */ + for (i = 0; (sd->noise_margin) && (i < loop); i++) { + /* + * We expect the sensor reading to be successful, but if for + * unknow reason it is not, use the data from the last + * successful reading + */ + if (anatop_get_temp(&tmp, tzdev)) { + tmp = sd->last_temp; + continue; + } + + if ((abs(tmp - sd->last_temp) <= sd->noise_margin) || + (consec_high >= sd->consec_high_limit)) { + sd->last_temp = tmp; + i = 0; + break; + } + if (tmp > sd->last_temp) + consec_high++; + + /* + * ignore first measurement as the previous measurement was + * a long time ago. + */ + if (i) + total += tmp; + + sd->last_temp = tmp; + } + + if (sd->noise_margin && i) + tmp = total / (loop - 1); + + /* + * The thermal framework code stores temperature in unsigned long. Also, + * it has references to "millicelsius" which limits the lowest + * temperature possible (compared to Kelvin). + */ + if (tmp > 0) + *temp = tmp; + else + *temp = 0; + return 0; +} + +static int th_sys_get_mode(struct thermal_zone_device *tzdev, + enum thermal_device_mode *mode) +{ + *mode = THERMAL_DEVICE_ENABLED; + return 0; +} + +static int th_sys_get_trip_type(struct thermal_zone_device *tzdev, int trip, + enum thermal_trip_type *type) +{ + *type = THERMAL_TRIP_CRITICAL; + return 0; +} + +static int th_sys_get_crit_temp(struct thermal_zone_device *tzdev, + unsigned long *temp) +{ + struct imx_anatop_thdata *p; + + p = (struct imx_anatop_thdata *)tzdev->devdata; + *temp = p->crit_temp_level; + return 0; +} + +static int th_sys_get_trip_temp(struct thermal_zone_device *tzdev, int trip, + unsigned long *temp) +{ + /* only a critical trip point is supported, for now. */ + return th_sys_get_crit_temp(tzdev, temp); +} + +static int __devinit anatop_process_ts_fuse_data(unsigned int fuse_data, + struct imx_anatop_thdata *thermal_data) +{ + int t1, t2, n1, n2; + struct imx_anatop_tsdata *sd = &thermal_data->sensor_data; + struct thermal_zone_device *tzdev = thermal_data->tzdev; + + + if (fuse_data == 0 || fuse_data == 0xffffffff) { + dev_warn(&tzdev->device, "WARNING: Disabling CPU thermal " + "protection (invalid calibration value of %x detected\n" + , fuse_data); + return -EINVAL; + } + + /* + * Fuse data layout: + * [31:20] sensor value @ 25C + * [19:8] sensor value of hot + * [7:0] hot temperature value + */ + n1 = fuse_data >> 20; + n2 = (fuse_data & 0xfff00) >> 8; + t2 = fuse_data & 0xff; + t1 = 25; /* t1 always 25C */ + + dev_dbg(&tzdev->device, " -- temperature sensor calibration data --\n"); + dev_dbg(&tzdev->device, "HW_OCOTP_ANA1: %x\n", fuse_data); + dev_dbg(&tzdev->device, "n1: %d\nn2: %d\nt1: %d\nt2: %d\n", n1, n2, t1, + t2); + + /* + * Derived from linear interpolation, + * Tmeas = T2 + (Nmeas - N2) * (T1 - T2) / (N1 - N2) + * We want to reduce this down to the minimum computation necessary + * for each temperature read. Also, we want Tmeas in millicelsius + * and we don't want to lose precision from integer division. So... + * milli_Tmeas = 1000 * T2 + 1000 * (Nmeas - N2) * (T1 - T2) / (N1 - N2) + * Let constant c1 = 1000 * (T1 - T2) / (N1 - N2) + * milli_Tmeas = (1000 * T2) + c1 * (Nmeas - N2) + * milli_Tmeas = (1000 * T2) + (c1 * Nmeas) - (c1 * N2) + * Let constant c2 = (1000 * T2) - (c1 * N2) + * milli_Tmeas = c2 + (c1 * Nmeas) + */ + sd->c1 = (1000 * (t1 - t2)) / (n1 - n2); + sd->c2 = (1000 * t2) - (sd->c1 * n2); + + dev_dbg(&tzdev->device, "c1: %i\n", sd->c1); + dev_dbg(&tzdev->device, "c2: %i\n", sd->c2); + return 0; +} + +static int anatop_thermal_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct imx_anatop_thdata *dd = platform_get_drvdata(pdev); + struct imx_anatop_tsdata *sd = &dd->sensor_data; + + /* power off the sensor during suspend */ + anatop_write_reg(sd->anatopmfd, HW_ANADIG_TEMPSENSE0, 0, + BM_ANADIG_TEMPSENSE0_MEASURE_TEMP); + + anatop_write_reg(sd->anatopmfd, HW_ANADIG_TEMPSENSE0, + BM_ANADIG_TEMPSENSE0_POWER_DOWN, + BM_ANADIG_TEMPSENSE0_POWER_DOWN); + return 0; +} + +static int anatop_thermal_resume(struct platform_device *pdev) +{ + struct imx_anatop_thdata *dd = platform_get_drvdata(pdev); + struct imx_anatop_tsdata *sd = &dd->sensor_data; + + sd->handle_suspend = true; + return 0; +} + +static int __devexit anatop_thermal_remove(struct platform_device *pdev) +{ + struct imx_anatop_thdata *dd = platform_get_drvdata(pdev); + + if (dd && dd->tzdev) + thermal_zone_device_unregister(dd->tzdev); + + if (dd->ocotp_base) + iounmap(dd->ocotp_base); + + dev_info(&pdev->dev, "imx thermal management unregistered\n"); + return 0; +} + +static int __devinit anatop_thermal_probe(struct platform_device *pdev) +{ + unsigned int fuse_data; + void __iomem *ocotp_base; + struct device_node *np_ocotp, *np_thermal; + static struct imx_anatop_thdata *therm_data; + struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent); + + struct imx_anatop_tsdata *sd; + int ret; + + np_ocotp = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp"); + np_thermal = pdev->dev.of_node; + + if (!(np_ocotp && np_thermal && anatopmfd)) + return 0; + + ocotp_base = of_iomap(np_ocotp, 0); + + if (!ocotp_base) { + dev_err(&pdev->dev, "Could not retrieve ocotp-base\n"); + ret = -ENXIO; + goto err_unregister; + } + + fuse_data = readl_relaxed(ocotp_base + HW_OCOTP_ANA1); + + therm_data = devm_kzalloc(&pdev->dev, sizeof(struct imx_anatop_thdata), + GFP_KERNEL); + + + if (!therm_data) { + ret = -ENOMEM; + goto err_unregister; + } + + therm_data->dev_ops.get_temp = th_sys_get_temp; + therm_data->dev_ops.get_mode = th_sys_get_mode; + therm_data->dev_ops.get_trip_type = th_sys_get_trip_type; + therm_data->dev_ops.get_trip_temp = th_sys_get_trip_temp; + therm_data->dev_ops.get_crit_temp = th_sys_get_crit_temp; + + /* + * max die temp on imx parts using anatop is 105C, let's give some + * cushion for noise and possible temperature rise between measurements. + */ + therm_data->crit_temp_level = 100000; /* in millicelsius */ + + sd = &therm_data->sensor_data; + sd->noise_margin = IMX_ANATOP_TS_NOISE_MARGIN; + sd->consec_high_limit = IMX_ANATOP_TS_NOISE_COUNT; + sd->anatopmfd = anatopmfd; + + platform_set_drvdata(pdev, therm_data); + + ret = anatop_process_ts_fuse_data(fuse_data, therm_data); + + if (ret) { + dev_err(&pdev->dev, "Invalid temperature calibration data.\n"); + goto err_unregister; + } + + /* Make sure sensor is in known good state for measurements */ + anatop_write_reg(anatopmfd, HW_ANADIG_TEMPSENSE0, 0, + BM_ANADIG_TEMPSENSE0_POWER_DOWN); + + anatop_write_reg(anatopmfd, HW_ANADIG_TEMPSENSE0, 0, + BM_ANADIG_TEMPSENSE0_MEASURE_TEMP); + + anatop_write_reg(anatopmfd, HW_ANADIG_TEMPSENSE1, 0, + BM_ANADIG_TEMPSENSE1_MEASURE_FREQ); + + anatop_write_reg(anatopmfd, HW_ANADIG_ANA_MISC0_SET, + BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, + BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF); + + anatop_write_reg(anatopmfd, HW_ANADIG_TEMPSENSE0, + BM_ANADIG_TEMPSENSE0_POWER_DOWN, + BM_ANADIG_TEMPSENSE0_POWER_DOWN); + + therm_data->tzdev = thermal_zone_device_register( + "Processor", 1, therm_data, &therm_data->dev_ops, 0, 0, 0, + IMX_THERMAL_POLLING_FREQUENCY_MS); + + if (IS_ERR(therm_data->tzdev)) { + dev_err(&pdev->dev, + "Failed to register thermal zone device\n"); + ret = -EINVAL; + goto err_unregister; + } + + dev_info(&pdev->dev, "imx thermal management registered\n"); + return 0; + +err_unregister: + anatop_thermal_remove(pdev); + return ret; +} + +static struct of_device_id __devinitdata of_anatop_thermal_match_tbl[] = { + { .compatible = "fsl,anatop-thermal", }, + { /* end */ } +}; + +static struct platform_driver anatop_thermal = { + .driver = { + .name = "anatop_thermal", + .owner = THIS_MODULE, + .of_match_table = of_anatop_thermal_match_tbl, + }, + .probe = anatop_thermal_probe, + .remove = anatop_thermal_remove, + .suspend = anatop_thermal_suspend, + .resume = anatop_thermal_resume, +}; + +static int __devinit anatop_thermal_init(void) +{ + return platform_driver_register(&anatop_thermal); +} +device_initcall(anatop_thermal_init); + +static void __exit anatop_thermal_exit(void) +{ + platform_driver_unregister(&anatop_thermal); +} +module_exit(anatop_thermal_exit); + +MODULE_AUTHOR("Freescale Semiconductor"); +MODULE_DESCRIPTION("i.MX anatop thermal driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-anatop-thermal");