[v5,0/3] ADD interconnect support for Qualcomm DWC3 driver

This path series aims to add interconnect support in
dwc3-qcom driver on SDM845 SoCs.

Changes from v4 -> v5
  > [PATCH 1/3] Added the interconnect properties in yaml. This patch depends
    on series https://patchwork.kernel.org/cover/11372641/.
  > [PATCH 2/3] Fixed review comments from Matthias in DWC3 driver.
  > [PATCH 3/3] Modified as per the new interconnect nodes in sdm845. Depends
    on series https://patchwork.kernel.org/cover/11372211/. 


Changes from v3 -> v4
  > Fixed review comments from Matthias
  > [PATCH 1/3] and [PATCH 3/3] remains unchanged

Changes from v2 -> v3
  > Fixed review comments from Matthias and Manu
  > changed the functions prefix from usb_* to dwc3_qcom_*

Changes since V1:
  > Comments by Georgi Djakov on "[PATCH 2/3]" addressed
  > [PATCH 1/3] and [PATCH 3/3] remains unchanged

Sandeep Maheswaram (3):
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for
    Qualcomm DWC3 driver
  usb: dwc3: qcom: Add interconnect support in dwc3 driver
  arm64: dts: sdm845: Add interconnect properties for USB

 .../devicetree/bindings/usb/qcom,dwc3.yaml         |  16 +++
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |  12 ++
 drivers/usb/dwc3/dwc3-qcom.c                       | 135 ++++++++++++++++++++-
 3 files changed, 161 insertions(+), 2 deletions(-)

On Fri, Feb 14, 2020 at 01:54:42PM +0530, Sandeep Maheswaram wrote:
> Add documentation for the interconnects and interconnect-names
> properties for USB.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> index 4a36ab5..236877e 100644
> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> @@ -68,6 +68,22 @@ properties:
>    resets:
>      maxItems: 1
>  
> +  interconnects:
> +    description:
> +      Pairs of phandles and interconnect provider specifiers
> +      to denote the edge source and destination ports of
> +      the interconnect path. Please refer to
> +      Documentation/devicetree/bindings/interconnect/
> +      for more details.

No need to redefine a common property, but you do need to define how 
many entries (maxItems).

> +
> +  interconnect-names:
> +    description:
> +      List of interconnect path name strings sorted in the same
> +      order as the interconnects property. Consumer drivers will use
> +      interconnect-names to match interconnect paths with interconnect
> +      specifiers. Please refer to Documentation/devicetree/bindings/
> +      interconnect/ for more details.

Need to define what the names are.

Rob