| Message ID | 1652934489-23386-1-git-send-email-quic_kriskura@quicinc.com |
|---|---|
| Headers | show |
| Series | Add QCOM SNPS PHY overriding params support | expand |
On 19/05/2022 06:28, Krishna Kurapati wrote: > From: Sandeep Maheswaram <quic_c_sanm@quicinc.com> > > Add device tree bindings for SNPS phy tuning parameters. > > Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
changes in v6: Fixed errors in dt-bindings. Fixed nitpick in driver code. changes in v5: Fixed nitpicks in code. Added minimum and maximum for each parameter added in dt-bindings. Added proper suffixes to each parameter as per dtschema. changes in v4: Fixed nitpicks in code. Initial compliance test results showed overshoot in the middle of eye diagram. The current dt values were put in place to correct it and fix overshoot issue. changes in v3: Added support for phy tuning parameters to be represented in bps and corresponding register values to be written are obtained by traversing through data map declared in the driver. changes in v2: Reading the individual fields in each overriding register from device tree. Krishna Kurapati (2): phy: qcom-snps: Add support for overriding phy tuning parameters arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device Sandeep Maheswaram (1): dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings .../bindings/phy/qcom,usb-snps-femto-v2.yaml | 96 ++++++++ arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 + drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 268 ++++++++++++++++++++- 3 files changed, 368 insertions(+), 2 deletions(-)