| Message ID | 1653049124-24713-1-git-send-email-quic_srivasam@quicinc.com |
|---|---|
| Headers | show |
| Series | Add soundcard support for sc7280 based platforms. | expand |
On Fri, 20 May 2022 17:48:32 +0530, Srinivasa Rao Mandadapu wrote: > This patch set is to add bolero digital macros, WCD and maxim codecs nodes > for audio on sc7280 based platforms. > > This patch set depends on: > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776 > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=634597 > -- https://patchwork.kernel.org/project/linux-clk/list/?series=637999 > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002 > > [...] Applied, thanks! [01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs commit: 12ef689f09abb50f0862c8e08138dd45cbf27233 [02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards commit: d3219de8bcebe4057696a2f99ce90c8812114c78 [03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 commit: d5a959f96be1b27c81d6197d66624cd6cc146fe6 [04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards commit: f8b4eb64f2003e0a1fa5011009955d46f90af285 [05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 commit: 0a3a56a93fd96cb3e3d42778f275e91750c242a7 [06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards commit: d6c006f510d9f29ff78761bb3ef50f14ebc05b7b [07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node commit: 14afeaf917375967bb84b4347cd8e4156b84c470 [08/12] arm64: dts: qcom: sc7280: Add lpass cpu node commit: aee6873edb93a3919706f70884e55880d8c727a5 [09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards. commit: 8cf4133bc1fbb6fbc695e4398b940caf3ec59ba5 [10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 commit: f10c73ac6e90ca2343fc4f06b61ce8c1824c9bfd [11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards commit: ece7d81f2447f4fd4f5d5345e921036871babf2b [12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 commit: 29e0b604f040ef794cd36d43b97bd9c040ed99e6 Best regards,
This patch set is to add bolero digital macros, WCD and maxim codecs nodes for audio on sc7280 based platforms. This patch set depends on: -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776 -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=634597 -- https://patchwork.kernel.org/project/linux-clk/list/?series=637999 -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002 Changes Since V11: -- Remove output-low pinconf setting in wcd-reset-n-sleep node. -- Update dependency list. Changes Since V10: -- Modify digital macro codecs pin control labels. -- Updated dependency list. Changes Since V9: -- Move wcd codec and digital codec nodes to sc7280-qcard file. -- Modify the reg property as per link number in sound node. -- Fix the us-euro pin control usage in wcd codec node. -- Move wcd pin control nodes to specific crd board files. -- Sort max98360a codec node in alphabetical order. -- Modify the commit messages. Changes Since V8: -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards. -- Add corresponding dt nodes for herobrine crd boards. -- Update dai-link node names as per dt-bindings in sound node. -- Add reg property in sound node as per dt-bindings which was removed in previous series. -- Fix typo errors. -- Update wcd codec pin control properties in board specific files. Changes Since V7: -- Remove redundant interrupt names in soundwire node. -- Fix typo errors. -- Remove redundant reg property in sound node. -- Rebased on top of latest kernel tip. Changes Since V6: -- Modify link-names and audio routing in a sound node. -- Move amp_en pin control node to appropriate consumer patch. -- Split patches as per digital macro codecs and board specific codecs and sort it. -- Modify label and node names to lpass specific. Changes Since V5: -- Move soc specific bolero digital codec nodes to soc specific file. -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series. -- Change node name and remove redundant status property in sound node. Changes Since V4: -- Update nodes in sorting order. -- Update DTS node names as per dt-bindings. -- Update Node properties in proper order. -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control. -- Remove redundant labels. -- Remove unused size cells and address cells in tx macro node. -- Keep all same nodes at one place, which are defined in same file. -- Add max98360a codec node to herobrine board specific targets. Changes Since V3: -- Move digital codec macro nodes to board specific dtsi file. -- Update pin controls in lpass cpu node. -- Update dependency patch list. -- Create patches on latest kernel. Changes Since V2: -- Add power domains to digital codec macro nodes. -- Change clock node usage in lpass cpu node. -- Add codec mem clock to lpass cpu node. -- Modify the node names to be generic. -- Move sound and codec nodes to root node. -- sort dai links as per reg. -- Fix typo errors. Changes Since V1: -- Update the commit message of cpu node patch. -- Add gpio control property to support Euro headset in wcd938x node. -- Fix clock properties in lpass cpu and digital codec macro node. Srinivasa Rao Mandadapu (12): arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node arm64: dts: qcom: sc7280: Add lpass cpu node arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards. arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++ arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 150 +++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 + arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 217 ++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 74 ++++++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 +++++++++++++++++++ 6 files changed, 676 insertions(+)