mbox series

[RESEND,v2,0/5] SCM: Add support for wait-queue aware firmware

Message ID 1661898311-30126-1-git-send-email-quic_gurus@quicinc.com
Headers show
Series SCM: Add support for wait-queue aware firmware | expand

Message

Guru Das Srinagesh Aug. 30, 2022, 10:25 p.m. UTC 
This patch series enables the QCOM SCM driver to support firmware (FW) versions
that expect the high-level OS (HLOS) to be tolerant of SCM call requests not
being processed right away and, instead, being placed on a wait-queue in FW and
processed accordingly.

The problem this feature is fixing is as follows. In a scenario where there is
a VM in addition to HLOS (and an underlying hypervisor):

1. HLOS makes an SMC call on core 5
2. The hypervisor scheduling interrupt interrupts this SMC call.
3. The hypervisor schedules the VM on core 5.
4. The VM makes an SMC call on core 5.
5. The SMC call is non-interruptibly stuck on FW spinlock on core 5.
6. HLOS cannot reschedule since core 5 is not responding to Reschedule IPIs.
7. Watchdog timer expires waiting for core 5.

This problem is solved by FW returning a new return code SCM_WAITQ_SLEEP to
HLOS right away when it is overwhelmed by the VM's SMC call. HLOS then places
the call on a wait-queue and wakes it up when it receives an interrupt that
signifies "all-clear".

Additionally, this new design also supports scenarios involving only HLOS (and
no other VMs).  Such scenarios make use of a second new return code
SCM_WAITQ_WAKE.

There are three new SMC calls also being defined in this design that, together
with the two new return codes, form the handshake protocol between Linux and
FW.

This design is also backwards-compatible with existing firmware versions that
do not support this feature.

---
v2:
- Changes made to patches 4 and 5 are listed therein.
- Rebased dt-bindings on top of the YAML conversion patch [1].

[1] https://lore.kernel.org/lkml/20220708090431.30437-1-david@ixit.cz/
---

Guru Das Srinagesh (5):
  dt-bindings: firmware: qcom-scm: Add "allow-multi-call" property
  firmware: qcom: scm: Optionally remove SCM call serialization
  dt-bindings: firmware: qcom-scm: Add optional interrupt
  firmware: qcom: scm: Add wait-queue helper functions
  firmware: qcom: scm: Add wait-queue handling logic

 .../devicetree/bindings/firmware/qcom,scm.yaml     |  10 ++
 drivers/firmware/qcom_scm-smc.c                    | 140 +++++++++++++++++++--
 drivers/firmware/qcom_scm.c                        | 125 +++++++++++++++++-
 drivers/firmware/qcom_scm.h                        |  14 +++
 4 files changed, 279 insertions(+), 10 deletions(-)