mbox series

[v2,0/3] Add support for SM8150 and SM8250 DSI.

Message ID 20200911151001.13156-1-jonathan@marek.ca
Headers show
Series Add support for SM8150 and SM8250 DSI. | expand

Message

Jonathan Marek Sept. 11, 2020, 3:09 p.m. UTC
Note I haven't tested SM8150 recently, but DSI is almost identical to SM8250.

v2:
 - added workaround for 5GHz max_rate overflowing in 32-bit builds
   (based on robclark's suggestion)
 - Updated Kconfig option to mention SM8250 and not just SM8150

Jonathan Marek (3):
  drm/msm/dsi: remove unused clk_pre/clk_post in msm_dsi_dphy_timing
  drm/msm/dsi: add DSI config for sm8150 and sm8250
  drm/msm/dsi: add support for 7nm DSI PHY/PLL

 .../devicetree/bindings/display/msm/dsi.txt   |   6 +-
 drivers/gpu/drm/msm/Kconfig                   |   8 +
 drivers/gpu/drm/msm/Makefile                  |   2 +
 drivers/gpu/drm/msm/dsi/dsi.h                 |   2 +
 drivers/gpu/drm/msm/dsi/dsi.xml.h             | 423 ++++++++
 drivers/gpu/drm/msm/dsi/dsi_cfg.c             |   5 +-
 drivers/gpu/drm/msm/dsi/dsi_cfg.h             |   2 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c         | 102 ++
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h         |   6 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c     | 255 +++++
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.c         |   4 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.h         |  10 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c     | 904 ++++++++++++++++++
 13 files changed, 1724 insertions(+), 5 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
 create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c