mbox series

[0/3] Add 'qcom,pon-reboot-not-used' support in PON driver

Message ID 20210705025032.12804-1-shawn.guo@linaro.org
Headers show
Series Add 'qcom,pon-reboot-not-used' support in PON driver | expand

Message

Shawn Guo July 5, 2021, 2:50 a.m. UTC
It's not always the case that reboot mode value gets stored in PON
register.  For example, Sony Xperia M4 Aqua phone (MSM8939) uses a
different set of mode values and stores them in IMEM.  The series adds
an optional DT property 'qcom,pon-reboot-not-used', and have PON driver
skip reboot-mode setup if the property is present.

Shawn Guo (3):
  dt-bindings: power: reset: Convert qcom,pon to DT schema
  dt-bindings: qcom,pon: Add 'qcom,pon-reboot-not-used' property
  power: reset: qcom-pon: Add support for 'qcom,pon-reboot-not-used'

 .../bindings/power/reset/qcom,pon.txt         | 49 -----------------
 .../bindings/power/reset/qcom,pon.yaml        | 53 +++++++++++++++++++
 drivers/power/reset/qcom-pon.c                |  9 ++++
 3 files changed, 62 insertions(+), 49 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
 create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml