mbox series

[v1,0/9] Enable Display for SM8350

Message ID 20221028120812.339100-1-robert.foss@linaro.org
Headers show
Series Enable Display for SM8350 | expand

Message

Robert Foss Oct. 28, 2022, 12:08 p.m. UTC
This series implements display support for SM8350 and
enables HDMI output for the SM8350-HDK platform.

Robert Foss (9):
  drm/msm: Add compatibles for SM8350 display
  drm/msm/dpu: Refactor sc7280_pp location
  drm/msm/dpu: Add SM8350 to hw catalog
  arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names
  arm64: dts: qcom: sm8350: Remove mmxc power-domain-name
  arm64: dts: qcom: sm8350: Use 2 interconnect cells
  arm64: dts: qcom: sm8350: Add display system nodes
  arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
  arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge

 arch/arm64/boot/dts/qcom/sm8350-hdk.dts       | 333 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8350.dtsi          | 217 +++++++++++-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 227 +++++++++++-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 drivers/gpu/drm/msm/msm_mdss.c                |   1 +
 6 files changed, 760 insertions(+), 20 deletions(-)