mbox series

[0/3] arm64: dts: qcom: sc8280xp: add audio support

Message ID 20221115170242.150246-1-srinivas.kandagatla@linaro.org
Headers show
Series arm64: dts: qcom: sc8280xp: add audio support | expand

Message

Srinivas Kandagatla Nov. 15, 2022, 5:02 p.m. UTC 
This patchset adds audio support for sc8280xp Lenovo x13s.
Support for Headset Playback/Capture, Speaker Playback and DMIC is
tested.

A prebuit ASoC topology file available at
https://git.linaro.org/people/srinivas.kandagatla/audioreach-topology.git/tree/prebuilt/SC8280XP-LENOVO-X13S-tplg.bin

Thanks,
Srini


Srinivas Kandagatla (3):
  arm64: dts: qcom: sc8280xp/sa8540p: add gpr node
  arm64: dts: qcom: sc8280xp/sa8540p: add SoundWire and LPASS
  arm64: dts: qcom: sc8280xp: Add soundcard support

 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 213 ++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 364 ++++++++++++++++++
 2 files changed, 577 insertions(+)

Comments

Krzysztof Kozlowski Nov. 16, 2022, 8:06 a.m. UTC | #1 
On 15/11/2022 18:02, Srinivas Kandagatla wrote:
> Add GPR node along with APM(Audio Process Manager) and PRM(Proxy
> resource Manager) audio services.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 ++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index c32bcded2aef..e3cdd8bccb0c 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -12,6 +12,7 @@
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/soc/qcom,gpr.h>
>  
>  / {
>  	interrupt-parent = <&intc>;
> @@ -1152,6 +1153,45 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
>  
>  				label = "lpass";
>  				qcom,remote-pid = <2>;
> +
> +				gpr {
> +					compatible = "qcom,gpr";
> +					qcom,glink-channels = "adsp_apps";
> +					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					qcom,intents = <512 20>;
> +
> +					q6apm: q6apm {
> +						reg = <GPR_APM_MODULE_IID>;
> +						compatible = "qcom,q6apm";
> +						#sound-dai-cells = <0>;
> +						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +						q6apmdai: dais {
> +							compatible = "qcom,q6apm-dais";
> +							#sound-dai-cells = <1>;

DAI cells are not allowed by binding, so either drop it or update binding.

> +							iommus = <&apps_smmu 0x0c01 0x0>;
> +						};
> +
> +						q6apmbedai: bedais {
> +							compatible = "qcom,q6apm-lpass-dais";
> +							#sound-dai-cells = <1>;
> +						};
> +					};
> +
> +					q6prm: q6prm {
> +						reg = <GPR_PRM_MODULE_IID>;
> +						compatible = "qcom,q6prm";
> +						#clock-cells = <2>;

Not allowed by binding.

> +						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +						q6prmcc: cc {

This should be "clock-controller".

> +							compatible = "qcom,q6prm-lpass-clocks";
> +							#clock-cells = <2>;
> +						};
> +					};
> +

Drop empty line

> +				};
> +

Ditto

>  			};
>  		};
>  

Best regards,
Krzysztof
Krzysztof Kozlowski Nov. 16, 2022, 8:10 a.m. UTC | #2 
On 15/11/2022 18:02, Srinivas Kandagatla wrote:
> Add LPASS Codecs along with SoundWire controller for TX, RX, WSA and VA macros
> along with LPASS LPI pinctrl node.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 324 +++++++++++++++++++++++++
>  1 file changed, 324 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index e3cdd8bccb0c..a87d58bee1e0 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -11,6 +11,7 @@
>  #include <dt-bindings/mailbox/qcom-ipcc.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/sound/qcom,q6afe.h>
>  #include <dt-bindings/thermal/thermal.h>
>  #include <dt-bindings/soc/qcom,gpr.h>
>  
> @@ -1115,6 +1116,9 @@ usb_2_ssphy1: phy@88f1e00 {
>  			};
>  		};
>  
> +		sound: sound {
> +		};

sound node is not part of SoC.

> +
>  		remoteproc_adsp: remoteproc@3000000 {
>  			compatible = "qcom,sc8280xp-adsp-pas";
>  			reg = <0 0x03000000 0 0x100>;
> @@ -1195,6 +1199,326 @@ q6prmcc: cc {
>  			};
>  		};
>  
> +		rxmacro: rxmacro@3200000 {
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&rx_swr_active>;
> +			compatible = "qcom,sc8280xp-lpass-rx-macro";
> +			reg = <0 0x3200000 0 0x1000>;
> +			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&vamacro>;
> +
> +			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
> +
> +			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				 <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +			assigned-clock-rates = <19200000>, <19200000>;
> +
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +			clock-output-names = "mclk";
> +			#sound-dai-cells = <1>;
> +		};
> +
> +		/* RX */
> +		swr1: soundwire-controller@3210000 {
> +			reg = <0 0x3210000 0 0x2000>;
> +			compatible = "qcom,soundwire-v1.6.0";
> +			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rxmacro>;
> +			clock-names = "iface";
> +			label = "RX";
> +			qcom,din-ports = <0>;
> +			qcom,dout-ports = <5>;
> +
> +			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>;
> +			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
> +			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
> +			qcom,ports-hstart =		/bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>;
> +			qcom,ports-hstop =		/bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>;
> +			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>;
> +			qcom,ports-block-pack-mode =	/bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>;
> +			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
> +			qcom,ports-block-group-count =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>;
> +			#sound-dai-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +		};
> +
> +		txmacro: txmacro@3220000 {
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&tx_swr_active>;
> +			compatible = "qcom,sc8280xp-lpass-tx-macro";
> +			reg = <0 0x3220000 0 0x1000>;
> +			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,

Align the opening <

> +				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				 <&vamacro>;
> +
> +			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
> +			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +			assigned-clock-rates = <19200000>, <19200000>;
> +
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +			clock-output-names = "mclk";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			#sound-dai-cells = <1>;
> +		};
> +
> +		/* TX */
> +		swr2: soundwire-controller@3330000 {
> +			reg = <0 0x3330000 0 0x2000>;
> +			compatible = "qcom,soundwire-v1.6.0";
> +			interrupts-extended = <&intc GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
> +						<&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "core", "wake";
> +
> +			clocks = <&vamacro>;
> +			clock-names = "iface";
> +			label = "TX";
> +
> +			qcom,din-ports = <4>;
> +			qcom,dout-ports = <0>;
> +			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03 0x03>;
> +			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x01>;
> +			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
> +			qcom,ports-block-pack-mode =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF>;
> +			qcom,ports-hstart =		/bits/ 8 <0xFF 0xFF 0xFF 0xFF>;
> +			qcom,ports-hstop =		/bits/ 8 <0xFF 0xFF 0xFF 0xFF>;
> +			qcom,ports-word-length =	/bits/ 8 <0xFF 0x00 0xFF 0xFF>;
> +			qcom,ports-block-group-count =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF>;
> +			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x00>;
> +			qcom,port-offset = <1>;
> +			#sound-dai-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +		};
> +
> +		wsamacro: codec@3240000 {

Order nodes by unit address.

> +			compatible = "qcom,sc8280xp-lpass-wsa-macro";
> +			reg = <0 0x03240000 0 0x1000>;
> +			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&vamacro>;
> +			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
> +
> +			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +					 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +			assigned-clock-rates = <19200000>, <19200000>;
> +
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +			clock-output-names = "mclk";
> +			#sound-dai-cells = <1>;
> +
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&wsa_swr_active>;
> +		};
> +
> +		/* WSA */
> +		swr0: soundwire-controller@3250000 {
> +			reg = <0 0x03250000 0 0x2000>;
> +			compatible = "qcom,soundwire-v1.6.0";
> +			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&wsamacro>;
> +			clock-names = "iface";
> +
> +			qcom,din-ports = <2>;
> +			qcom,dout-ports = <6>;
> +
> +			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
> +			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
> +			qcom,ports-offset2 =		/bits/ 8 <0xFF 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
> +			qcom,ports-hstart =		/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF>;
> +			qcom,ports-hstop =		/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF>;
> +			qcom,ports-word-length =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF>;
> +			qcom,ports-block-pack-mode =	/bits/ 8 <0xFF 0xFF 0x01 0xFF 0xFF 0x01 0xFF 0xFF>;
> +			qcom,ports-block-group-count =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF>;
> +			qcom,ports-lane-control =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF>;
> +			qcom,port-offset = <1>;
> +			#sound-dai-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +		};
> +
> +		vamacro: codec@3370000 {
> +			compatible = "qcom,sc8280xp-lpass-va-macro";
> +			reg = <0 0x03370000 0 0x1000>;
> +			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +
> +			clock-names = "mclk", "npl", "macro", "dcodec";
> +			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +			assigned-clock-rates = <19200000>;
> +
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +			clock-output-names = "fsgen";
> +			#sound-dai-cells = <1>;
> +		};
> +
> +		lpass_tlmm: pinctrl@33c0000 {
> +			compatible = "qcom,sc8280xp-lpass-lpi-pinctrl";
> +			reg = <0 0x33c0000 0x0 0x20000>,
> +			      <0 0x3550000 0x0 0x10000>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&lpass_tlmm 0 0 18>;
> +
> +			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +				<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +			clock-names = "core", "audio";
> +
> +			wsa_swr_active: wsa-swr-active-pins {

There is no way this passes bindings test. state suffix.

> +				clk {

pins suffix

> +					pins = "gpio10";
> +					function = "wsa_swr_clk";
> +					drive-strength = <2>;
> +					slew-rate = <1>;
> +					bias-disable;
> +				};
> +
> +				data {
> +					pins = "gpio11";
> +					function = "wsa_swr_data";
> +					drive-strength = <2>;
> +					slew-rate = <1>;
> +					bias-bus-hold;
> +
> +				};
> +			};
> +
> +			tx_swr_active: tx_swr-active-pins {
> +				clk {
> +					pins = "gpio0";
> +					function = "swr_tx_clk";
> +					drive-strength = <2>;
> +					slew-rate = <1>;
> +					bias-disable;
> +				};
> +
> +				data {
> +					pins = "gpio1", "gpio2";
> +					function = "swr_tx_data";
> +					drive-strength = <2>;
> +					slew-rate = <1>;
> +					bias-bus-hold;
> +				};
> +			};
> +
> +			rx_swr_active: rx_swr-active-pins {
> +				clk {
> +					pins = "gpio3";
> +					function = "swr_rx_clk";
> +					drive-strength = <2>;
> +					slew-rate = <1>;
> +					bias-disable;
> +				};
> +
> +				data {
> +					pins = "gpio4", "gpio5";
> +					function = "swr_rx_data";
> +					drive-strength = <2>;
> +					slew-rate = <1>;
> +					bias-bus-hold;
> +				};
> +			};
> +
> +			wsa2_swr_active: wsa2-swr-active-pins {
> +				clk {
> +					pins = "gpio15";
> +					function = "wsa2_swr_clk";
> +					drive-strength = <2>;
> +					slew-rate = <1>;
> +					bias-disable;
> +				};
> +
> +				data {
> +					pins = "gpio16";
> +					function = "wsa2_swr_data";
> +					drive-strength = <2>;
> +					slew-rate = <1>;
> +					bias-bus-hold;
> +				};
> +			};
> +
> +			dmic01_active: dmic01-active-pins {
> +				clk {
> +					pins = "gpio6";
> +					function = "dmic1_clk";
> +					drive-strength = <8>;
> +					output-high;
> +				};

Blank line

> +				data {
> +					pins = "gpio7";
> +					function = "dmic1_data";
> +					drive-strength = <8>;
> +					input-enable;
> +				};
> +			};
> +
> +			dmic01_sleep: dmic01-sleep-pins {
> +				clk {
> +					pins = "gpio6";
> +					function = "dmic1_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +					output-low;
> +				};
> +
> +				data {
> +					pins = "gpio7";
> +					function = "dmic1_data";
> +					drive-strength = <2>;
> +					pull-down;
> +					input-enable;
> +				};
> +			};
> +
> +			dmic02_active: dmic02-active-pins {
> +				clk {
> +					pins = "gpio8";
> +					function = "dmic2_clk";
> +					drive-strength = <8>;
> +					output-high;
> +				};

Blank line

> +				data {
> +					pins = "gpio9";
> +					function = "dmic2_data";
> +					drive-strength = <8>;
> +					input-enable;
> +				};
> +			};
> +

Best regards,
Krzysztof
Krzysztof Kozlowski Nov. 16, 2022, 10:40 a.m. UTC | #3 
On 16/11/2022 09:10, Krzysztof Kozlowski wrote:
> On 15/11/2022 18:02, Srinivas Kandagatla wrote:
>> Add LPASS Codecs along with SoundWire controller for TX, RX, WSA and VA macros
>> along with LPASS LPI pinctrl node.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 324 +++++++++++++++++++++++++
>>  1 file changed, 324 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> index e3cdd8bccb0c..a87d58bee1e0 100644
>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> @@ -11,6 +11,7 @@
>>  #include <dt-bindings/mailbox/qcom-ipcc.h>
>>  #include <dt-bindings/power/qcom-rpmpd.h>
>>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +#include <dt-bindings/sound/qcom,q6afe.h>
>>  #include <dt-bindings/thermal/thermal.h>
>>  #include <dt-bindings/soc/qcom,gpr.h>
>>  
>> @@ -1115,6 +1116,9 @@ usb_2_ssphy1: phy@88f1e00 {
>>  			};
>>  		};
>>  
>> +		sound: sound {
>> +		};
> 
> sound node is not part of SoC.
> 

To clarify - I meant to put it outside of soc node.

Best regards,
Krzysztof
Johan Hovold Nov. 16, 2022, 11:03 a.m. UTC | #4 
On Tue, Nov 15, 2022 at 05:02:40PM +0000, Srinivas Kandagatla wrote:
> Add GPR node along with APM(Audio Process Manager) and PRM(Proxy

Perhaps spell out GPR as well.

> resource Manager) audio services.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 ++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index c32bcded2aef..e3cdd8bccb0c 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -12,6 +12,7 @@
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/soc/qcom,gpr.h>

Please keep the include directives sorted.

>  
>  / {
>  	interrupt-parent = <&intc>;
> @@ -1152,6 +1153,45 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
>  
>  				label = "lpass";
>  				qcom,remote-pid = <2>;
> +
> +				gpr {
> +					compatible = "qcom,gpr";
> +					qcom,glink-channels = "adsp_apps";
> +					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;

I'd move the address and size cells properties above the vendor ones.

> +					qcom,intents = <512 20>;
> +
> +					q6apm: q6apm {
> +						reg = <GPR_APM_MODULE_IID>;
> +						compatible = "qcom,q6apm";

Please move compatible before reg throughout.

> +						#sound-dai-cells = <0>;
> +						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +						q6apmdai: dais {
> +							compatible = "qcom,q6apm-dais";
> +							#sound-dai-cells = <1>;
> +							iommus = <&apps_smmu 0x0c01 0x0>;
> +						};
> +
> +						q6apmbedai: bedais {
> +							compatible = "qcom,q6apm-lpass-dais";
> +							#sound-dai-cells = <1>;
> +						};
> +					};
> +
> +					q6prm: q6prm {
> +						reg = <GPR_PRM_MODULE_IID>;
> +						compatible = "qcom,q6prm";
> +						#clock-cells = <2>;
> +						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +						q6prmcc: cc {
> +							compatible = "qcom,q6prm-lpass-clocks";
> +							#clock-cells = <2>;
> +						};
> +					};
> +

Stray new line.

> +				};
> +

Same here.

>  			};
>  		};

Johan
Srinivas Kandagatla Nov. 19, 2022, 4:36 p.m. UTC | #5 
On 16/11/2022 08:06, Krzysztof Kozlowski wrote:
> On 15/11/2022 18:02, Srinivas Kandagatla wrote:
>> Add GPR node along with APM(Audio Process Manager) and PRM(Proxy
>> resource Manager) audio services.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 ++++++++++++++++++++++++++
>>   1 file changed, 40 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> index c32bcded2aef..e3cdd8bccb0c 100644
>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> @@ -12,6 +12,7 @@
>>   #include <dt-bindings/power/qcom-rpmpd.h>
>>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>   #include <dt-bindings/thermal/thermal.h>
>> +#include <dt-bindings/soc/qcom,gpr.h>
>>   
>>   / {
>>   	interrupt-parent = <&intc>;
>> @@ -1152,6 +1153,45 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
>>   
>>   				label = "lpass";
>>   				qcom,remote-pid = <2>;
>> +
>> +				gpr {
>> +					compatible = "qcom,gpr";
>> +					qcom,glink-channels = "adsp_apps";
>> +					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
>> +					#address-cells = <1>;
>> +					#size-cells = <0>;
>> +					qcom,intents = <512 20>;
>> +
>> +					q6apm: q6apm {
>> +						reg = <GPR_APM_MODULE_IID>;
>> +						compatible = "qcom,q6apm";
>> +						#sound-dai-cells = <0>;
>> +						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
>> +						q6apmdai: dais {
>> +							compatible = "qcom,q6apm-dais";
>> +							#sound-dai-cells = <1>;
> 
> DAI cells are not allowed by binding, so either drop it or update binding.

Thanks Krzystof, Konrad and Johan for reviewing.

I agree with all of the comments and they are fixed now.
it will be part of v2.

--srini

> 
>> +							iommus = <&apps_smmu 0x0c01 0x0>;
>> +						};
>> +
>> +						q6apmbedai: bedais {
>> +							compatible = "qcom,q6apm-lpass-dais";
>> +							#sound-dai-cells = <1>;
>> +						};
>> +					};
>> +
>> +					q6prm: q6prm {
>> +						reg = <GPR_PRM_MODULE_IID>;
>> +						compatible = "qcom,q6prm";
>> +						#clock-cells = <2>;
> 
> Not allowed by binding.
> 
>> +						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
>> +						q6prmcc: cc {
> 
> This should be "clock-controller".
> 
>> +							compatible = "qcom,q6prm-lpass-clocks";
>> +							#clock-cells = <2>;
>> +						};
>> +					};
>> +
> 
> Drop empty line
> 
>> +				};
>> +
> 
> Ditto
> 
>>   			};
>>   		};
>>   
> 
> Best regards,
> Krzysztof
>