mbox series

[0/2] Add initial support for RDP453 of IPQ9574 family

Message ID 20230526153152.777-1-quic_devipriy@quicinc.com
Headers show
Series Add initial support for RDP453 of IPQ9574 family | expand

Message

Devi Priya May 26, 2023, 3:31 p.m. UTC 
Add the initial device tree support for the Reference Design
Platform(RDP) 453 based on IPQ9574 family of SoCs. This patch series adds
support for Console UART, SPI NOR and SMPA1 regulator node.

The series depends on the below patch sets which adds support for
SPI NOR and SMPA1 regulator nodes.
https://lore.kernel.org/linux-arm-msm/20230329053726.14860-3-quic_kathirav@quicinc.com/
https://lore.kernel.org/linux-arm-msm/20230407155727.20615-1-quic_devipriy@quicinc.com/

Devi Priya (2):
  dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family
  arm64: dts: qcom: ipq9574: add support for RDP453 variant

 .../devicetree/bindings/arm/qcom.yaml         |  2 +
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts   | 80 +++++++++++++++++++
 3 files changed, 83 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts

Comments

Conor Dooley May 26, 2023, 6:50 p.m. UTC | #1 
On Fri, May 26, 2023 at 09:01:51PM +0530, Devi Priya wrote:
> Document AL02-C8 (Reference Design Platform 453) board based on IPQ9574
> family of SoCs.
> 
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.