| Message ID | 20230622135955.941-1-quic_ptalari@quicinc.com |
|---|---|
| Headers | show |
| Series | spi-geni-qcom: Add SPI device mode support for GENI based QuPv3 | expand |
On 22/06/2023 15:59, Praveen Talari wrote: > Add a property to configure QUPv3 SE as SPI Device mode. > > Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com> > --- > v2 -> v3: > - modified commit message to use device mode instead of slave mode > --- > Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml > index 2e20ca313ec1..5c7d0293bbf7 100644 > --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml > +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml > @@ -66,6 +66,10 @@ properties: > reg: > maxItems: 1 > > + qcom,slv-ctrl: > + description: configure QUPv3 SE as Device mode There is already property for this. Look at spi-controller.yaml. If it is not enough, explain WHY. Best regards, Krzysztof
This series adds spi device mode functionality to geni based Qupv3. The common header file contains spi slave related registers and masks. Praveen Talari (3): soc: qcom: geni-se: Add SPI Device mode support for GENI based QuPv3 spi: dt-bindings: qcom,spi-geni-qcom: Add SPI device mode support for GENI based QuPv3 spi: spi-geni-qcom: Add SPI Device mode support for GENI based QuPv3 --- v2 -> v3: - Modified commit message - Addressed comment on dt-binding v1 -> v2: - Added dt-binding change for spi slave - Modified commit message - Addressed review comments in driver .../bindings/spi/qcom,spi-geni-qcom.yaml | 4 ++ drivers/spi/spi-geni-qcom.c | 57 +++++++++++++++++-- include/linux/soc/qcom/geni-se.h | 9 +++ 3 files changed, 64 insertions(+), 6 deletions(-)