mbox series

[0/9] arm64: dts: qcom: enable EMAC1 on sa8775p

Message ID 20230807193507.6488-1-brgl@bgdev.pl
Headers show
Series arm64: dts: qcom: enable EMAC1 on sa8775p | expand

Message

Bartosz Golaszewski Aug. 7, 2023, 7:34 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This series contains changes required to enable EMAC1 on sa8775p-ride.

Bartosz Golaszewski (9):
  arm64: dts: qcom: sa8775p: add a node for the second serdes PHY
  arm64: dts: qcom: sa8775p: add a node for EMAC1
  arm64: dts: qcom: sa8775p-ride: enable the second SerDes PHY
  arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet1
  arm64: dts: qcom: sa8775p-ride: move the reset-gpios property of the
    PHY
  arm64: dts: qcom: sa8775p-ride: index the first SGMII PHY
  arm64: dts: qcom: sa8775p-ride: add the second SGMII PHY
  arm64: dts: qcom: sa8775p-ride: label the mdio node
  arm64: dts: qcom: sa8775p-ride: enable EMAC1

 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 116 ++++++++++++++++++++--
 arch/arm64/boot/dts/qcom/sa8775p.dtsi     |  43 ++++++++
 2 files changed, 152 insertions(+), 7 deletions(-)