mbox series

[v14,0/9] Add multiport support for DWC3 controllers

Message ID 20240206051825.1038685-1-quic_kriskura@quicinc.com
Headers show
Series Add multiport support for DWC3 controllers | expand

Message

Krishna Kurapati Feb. 6, 2024, 5:18 a.m. UTC
Currently the DWC3 driver supports only single port controller which
requires at most two PHYs ie HS and SS PHYs. There are SoCs that has
DWC3 controller with multiple ports that can operate in host mode.
Some of the port supports both SS+HS and other port supports only HS
mode.

This change primarily refactors the Phy logic in core driver to allow
multiport support with Generic Phy's.

Changes have been tested on  QCOM SoC SA8295P which has 4 ports (2
are HS+SS capable and 2 are HS only capable).

Changes in v14:
Moved wrapper binding update to 5th patch in the series as it deals
with only wakeup and not enumeration. The first part of the series
deals with enumeration and the next part deals with wakeup.
Updated commit text for wrapper driver patches.
Added error checks in get_port_index and setup_irq call which were
missing in v13.
Added SOB and CDB tags appropriately for the patches.
Rebased code on top of latest usb next.
DT changes have been removed and will be sent as a seperate series.

Changes in v13:
This series is a subset of patches in v11 as the first 3 patches in v11
have been mereged into usb-next.
Moved dr_mode property from platform specific files to common sc8280xp DT.
Fixed function call wrapping, added comments and replaced #defines with
enum in dwc3-qcom for identifying IRQ index appropriately.
Fixed nitpicks pointed out in v11 for suspend-resume handling.
Added reported-by tag for phy refactoring patch as a compile error was
found by kernel test bot [1].
Removed reviewed-by tag of maintainer for phy refactoring patch as a minor
change of increasing phy-names array size by 2-bytes was done to fix
compilation issue mentioned in [1].

Changes in v12:
Pushed as a subset of acked but no-yet-merged patches of v11 with intent
of making rebase of other patches easy. Active reviewers from community
suggested that it would be better to push the whole series in one go as it
would give good clarity and context for all the patches in the series.
So pushed v13 for the same addressing comments received in v11.

Changes in v11:
Implemented port_count calculation by reading interrupt-names from DT.
Refactored IRQ handling in dwc3-qcom.
Moving of macros to xhci-ext-caps.h made as a separate patch.
Names of interrupts to be displayed on /proc/interrupts set to the ones
present in DT.

Changes in v10:
Refactored phy init/exit/power-on/off functions in dwc3 core
Refactored dwc3-qcom irq registration and handling
Implemented wakeup for multiport irq's
Moved few macros from xhci.h to xhci-ext-caps.h
Fixed nits pointed out in v9
Fixed Co-developed by and SOB tags in patches 5 and 11

Changes in v9:
Added IRQ support for DP/DM/SS MP Irq's of SC8280
Refactored code to read port count by accessing xhci registers

Changes in v8:
Reorganised code in patch-5
Fixed nitpicks in code according to comments received on v7
Fixed indentation in DT patches
Added drive strength for pinctrl nodes in SA8295 DT

Changes in v7:
Added power event irq's for Multiport controller.
Udpated commit text for patch-9 (adding DT changes for enabling first
port of multiport controller on sa8540-ride).
Fixed check-patch warnings for driver code.
Fixed DT binding errors for changes in snps,dwc3.yaml
Reabsed code on top of usb-next

Changes in v6:
Updated comments in code after.
Updated variables names appropriately as per review comments.
Updated commit text in patch-2 and added additional info as per review
comments.
The patch header in v5 doesn't have "PATHCH v5" notation present. Corrected
it in this version.

Changes in v5:
Added DT support for first port of Teritiary USB controller on SA8540-Ride
Added support for reading port info from XHCI Extended Params registers.

Changes in RFC v4:
Added DT support for SA8295p.

Changes in RFC v3:
Incase any PHY init fails, then clear/exit the PHYs that
are already initialized.

Changes in RFC v2:
Changed dwc3_count_phys to return the number of PHY Phandles in the node.
This will be used now in dwc3_extract_num_phys to increment num_usb2_phy 
and num_usb3_phy.
Added new parameter "ss_idx" in dwc3_core_get_phy_ny_node and changed its
structure such that the first half is for HS-PHY and second half is for
SS-PHY.
In dwc3_core_get_phy, for multiport controller, only if SS-PHY phandle is
present, pass proper SS_IDX else pass -1.

Tested enumeration and wakeup on all ports:

/ # lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 018: ID 0781:5567
Bus 001 Device 020: ID 03f0:134a
Bus 002 Device 002: ID 18d1:4ee1
Bus 002 Device 001: ID 1d6b:0003
/ #
/ # dmesg | grep ports
[    0.224450] hub 1-0:1.0: 4 ports detected
[    0.230479] hub 2-0:1.0: 2 ports detecte/ #
/ #
/ # cat /proc/interrupts  |grep phy
158:          1          0          0          0          0          0          0          0       PDC 127 Edge      dp_hs_phy_1
159:          2          0          0          0          0          0          0          0       PDC 126 Edge      dm_hs_phy_1
160:          6          0          0          0          0          0          0          0       PDC 129 Edge      dp_hs_phy_2
161:          3          0          0          0          0          0          0          0       PDC 128 Edge      dm_hs_phy_2
162:          1          0          0          0          0          0          0          0       PDC 131 Edge      dp_hs_phy_3
163:          2          0          0          0          0          0          0          0       PDC 130 Edge      dm_hs_phy_3
164:          2          0          0          0          0          0          0          0       PDC 133 Edge      dp_hs_phy_4
165:          3          0          0          0          0          0          0          0       PDC 132 Edge      dm_hs_phy_4
166:          0          0          0          0          0          0          0          0       PDC  16 Level     ss_phy_1
167:          0          0          0          0          0          0          0          0       PDC  17 Level     ss_phy_2

Links to previous versions:
Link to v13: https://lore.kernel.org/all/20231007154806.605-1-quic_kriskura@quicinc.com/
Link to v12: https://lore.kernel.org/all/20231004165922.25642-1-quic_kriskura@quicinc.com/
Link to v11: https://lore.kernel.org/all/20230828133033.11988-1-quic_kriskura@quicinc.com/
Link to v10: https://lore.kernel.org/all/20230727223307.8096-1-quic_kriskura@quicinc.com/
Link to v9: https://lore.kernel.org/all/20230621043628.21485-1-quic_kriskura@quicinc.com/
Link to v8: https://lore.kernel.org/all/20230514054917.21318-1-quic_kriskura@quicinc.com/
Link to v7: https://lore.kernel.org/all/20230501143445.3851-1-quic_kriskura@quicinc.com/
Link to v6: https://lore.kernel.org/all/20230405125759.4201-1-quic_kriskura@quicinc.com/
Link to v5: https://lore.kernel.org/all/20230310163420.7582-1-quic_kriskura@quicinc.com/
Link to RFC v4: https://lore.kernel.org/all/20230115114146.12628-1-quic_kriskura@quicinc.com/
Link to RFC v3: https://lore.kernel.org/all/1654709787-23686-1-git-send-email-quic_harshq@quicinc.com/#r
Link to RFC v2: https://lore.kernel.org/all/1653560029-6937-1-git-send-email-quic_harshq@quicinc.com/#r

Harsh Agarwal (1):
  usb: dwc3: core: Refactor PHY logic to support Multiport Controller

Krishna Kurapati (8):
  dt-bindings: usb: Add bindings for multiport properties on DWC3
    controller
  usb: dwc3: core: Access XHCI address space temporarily to read port
    info
  usb: dwc3: core: Skip setting event buffers for host only controllers
  dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  usb: dwc3: qcom: Add helper function to request wakeup interrupts
  usb: dwc3: qcom: Refactor IRQ handling in glue driver
  usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
  usb: dwc3: qcom: Add multiport suspend/resume support for wrapper

 .../devicetree/bindings/usb/qcom,dwc3.yaml    |  33 ++
 .../devicetree/bindings/usb/snps,dwc3.yaml    |  13 +-
 drivers/usb/dwc3/core.c                       | 326 +++++++++++++----
 drivers/usb/dwc3/core.h                       |  19 +-
 drivers/usb/dwc3/drd.c                        |  15 +-
 drivers/usb/dwc3/dwc3-qcom.c                  | 329 ++++++++++++------
 6 files changed, 534 insertions(+), 201 deletions(-)

Comments

Bjorn Andersson Feb. 9, 2024, 2:46 a.m. UTC | #1
On Tue, Feb 06, 2024 at 10:48:19AM +0530, Krishna Kurapati wrote:
> On some SoC's like SA8295P where the tertiary controller is host-only
> capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible.
> Trying to access them leads to a crash.
> 
> For DRD/Peripheral supported controllers, event buffer setup is done
> again in gadget_pullup. Skip setup or cleanup of event buffers if
> controller is host-only capable.
> 
> Suggested-by: Johan Hovold <johan@kernel.org>
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Regards,
Bjorn

> ---
>  drivers/usb/dwc3/core.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 965eaad195fb..c47fec10b231 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -486,6 +486,13 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
>  static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned int length)
>  {
>  	struct dwc3_event_buffer *evt;
> +	unsigned int hw_mode;
> +
> +	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
> +	if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
> +		dwc->ev_buf = NULL;
> +		return 0;
> +	}
>  
>  	evt = dwc3_alloc_one_event_buffer(dwc, length);
>  	if (IS_ERR(evt)) {
> @@ -507,6 +514,9 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc)
>  {
>  	struct dwc3_event_buffer	*evt;
>  
> +	if (!dwc->ev_buf)
> +		return 0;
> +
>  	evt = dwc->ev_buf;
>  	evt->lpos = 0;
>  	dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
> @@ -524,6 +534,9 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
>  {
>  	struct dwc3_event_buffer	*evt;
>  
> +	if (!dwc->ev_buf)
> +		return;
> +
>  	evt = dwc->ev_buf;
>  
>  	evt->lpos = 0;
> -- 
> 2.34.1
>
Bjorn Andersson Feb. 9, 2024, 2:54 a.m. UTC | #2
On Tue, Feb 06, 2024 at 10:48:21AM +0530, Krishna Kurapati wrote:
> Add the compatible string for SC8280 Multiport USB controller from
> Qualcomm.
> 
> There are 4 power event irq interrupts supported by this controller
> (one for each port of multiport). Added all the 4 as non-optional
> interrupts for SC8280XP-MP
> 
> Also each port of multiport has one DP and oen DM IRQ. Add all DP/DM
> IRQ's related to 4 ports of SC8280XP Teritiary controller.
> 
> Also added ss phy irq for both SS Ports.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Regards,
Bjorn

> ---
>  .../devicetree/bindings/usb/qcom,dwc3.yaml    | 33 +++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> index 63d150b216c5..cc7cf592c029 100644
> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> @@ -30,6 +30,7 @@ properties:
>            - qcom,sc7180-dwc3
>            - qcom,sc7280-dwc3
>            - qcom,sc8280xp-dwc3
> +          - qcom,sc8280xp-dwc3-mp
>            - qcom,sdm660-dwc3
>            - qcom,sdm670-dwc3
>            - qcom,sdm845-dwc3
> @@ -282,6 +283,7 @@ allOf:
>            contains:
>              enum:
>                - qcom,sc8280xp-dwc3
> +              - qcom,sc8280xp-dwc3-mp
>                - qcom,x1e80100-dwc3
>      then:
>        properties:
> @@ -470,6 +472,37 @@ allOf:
>              - const: dm_hs_phy_irq
>              - const: ss_phy_irq
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sc8280xp-dwc3-mp
> +    then:
> +      properties:
> +        interrupts:
> +          maxItems: 18
> +        interrupt-names:
> +          items:
> +            - const: pwr_event_1
> +            - const: pwr_event_2
> +            - const: pwr_event_3
> +            - const: pwr_event_4
> +            - const: hs_phy_1
> +            - const: hs_phy_2
> +            - const: hs_phy_3
> +            - const: hs_phy_4
> +            - const: dp_hs_phy_1
> +            - const: dm_hs_phy_1
> +            - const: dp_hs_phy_2
> +            - const: dm_hs_phy_2
> +            - const: dp_hs_phy_3
> +            - const: dm_hs_phy_3
> +            - const: dp_hs_phy_4
> +            - const: dm_hs_phy_4
> +            - const: ss_phy_1
> +            - const: ss_phy_2
> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.34.1
>
Bjorn Andersson Feb. 9, 2024, 2:57 a.m. UTC | #3
On Tue, Feb 06, 2024 at 10:48:23AM +0530, Krishna Kurapati wrote:
> On multiport supported controllers, each port has its own DP/DM
> and SS (if super speed capable) interrupts. As per the bindings,
> their interrupt names differ from standard ones having "_x" added
> as suffix (x indicates port number). Refactor dwc3_qcom_setup_irq()
> call to parse multiport interrupts along with non-multiport ones.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Regards,
Bjorn

> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 222 +++++++++++++++++++++++++----------
>  1 file changed, 161 insertions(+), 61 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 08df29584366..a20d63a791bd 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -53,17 +53,33 @@
>  #define APPS_USB_AVG_BW 0
>  #define APPS_USB_PEAK_BW MBps_to_icc(40)
>  
> +#define NUM_PHY_IRQ		4
> +
> +enum dwc3_qcom_phy_index {
> +	DP_HS_PHY_IRQ_INDEX,
> +	DM_HS_PHY_IRQ_INDEX,
> +	SS_PHY_IRQ_INDEX,
> +	QUSB2_PHY_IRQ_INDEX,
> +};
> +
>  struct dwc3_acpi_pdata {
>  	u32			qscratch_base_offset;
>  	u32			qscratch_base_size;
>  	u32			dwc3_core_base_size;
> -	int			qusb2_phy_irq_index;
> -	int			dp_hs_phy_irq_index;
> -	int			dm_hs_phy_irq_index;
> -	int			ss_phy_irq_index;
> +	/*
> +	 * The phy_irq_index corresponds to ACPI indexes of (in order)
> +	 * DP/DM/SS/QUSB2 IRQ's respectively.
> +	 */
> +	int			phy_irq_index[NUM_PHY_IRQ];
>  	bool			is_urs;
>  };
>  
> +struct dwc3_qcom_port {
> +	int			dp_hs_phy_irq;
> +	int			dm_hs_phy_irq;
> +	int			ss_phy_irq;
> +};
> +
>  struct dwc3_qcom {
>  	struct device		*dev;
>  	void __iomem		*qscratch_base;
> @@ -74,9 +90,7 @@ struct dwc3_qcom {
>  	struct reset_control	*resets;
>  
>  	int			qusb2_phy_irq;
> -	int			dp_hs_phy_irq;
> -	int			dm_hs_phy_irq;
> -	int			ss_phy_irq;
> +	struct dwc3_qcom_port	port_info[DWC3_MAX_PORTS];
>  	enum usb_device_speed	usb2_speed;
>  
>  	struct extcon_dev	*edev;
> @@ -91,6 +105,7 @@ struct dwc3_qcom {
>  	bool			pm_suspended;
>  	struct icc_path		*icc_path_ddr;
>  	struct icc_path		*icc_path_apps;
> +	u8			num_ports;
>  };
>  
>  static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
> @@ -375,16 +390,16 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
>  	dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
>  
>  	if (qcom->usb2_speed == USB_SPEED_LOW) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq);
>  	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
>  			(qcom->usb2_speed == USB_SPEED_FULL)) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq);
>  	} else {
> -		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> -		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq);
>  	}
>  
> -	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
> +	dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].ss_phy_irq);
>  }
>  
>  static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> @@ -401,20 +416,20 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
>  	 */
>  
>  	if (qcom->usb2_speed == USB_SPEED_LOW) {
> -		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
> -						IRQ_TYPE_EDGE_FALLING);
> +		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq,
> +					    IRQ_TYPE_EDGE_FALLING);
>  	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
>  			(qcom->usb2_speed == USB_SPEED_FULL)) {
> -		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
> -						IRQ_TYPE_EDGE_FALLING);
> +		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq,
> +					    IRQ_TYPE_EDGE_FALLING);
>  	} else {
> -		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
> -						IRQ_TYPE_EDGE_RISING);
> -		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
> -						IRQ_TYPE_EDGE_RISING);
> +		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq,
> +					    IRQ_TYPE_EDGE_RISING);
> +		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq,
> +					    IRQ_TYPE_EDGE_RISING);
>  	}
>  
> -	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0);
> +	dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].ss_phy_irq, 0);
>  }
>  
>  static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> @@ -535,6 +550,74 @@ static int dwc3_qcom_get_irq(struct platform_device *pdev,
>  	return ret;
>  }
>  
> +static int dwc3_qcom_get_irq_index(const char *irq_name)
> +{
> +	/*
> +	 * Parse IRQ index based on prefixes from interrupt name.
> +	 * Return -1 incase of an invalid interrupt name.
> +	 */
> +	int irq_index = -1;
> +
> +	if (strncmp(irq_name, "dp_hs_phy", strlen("dp_hs_phy")) == 0)
> +		irq_index = DP_HS_PHY_IRQ_INDEX;
> +	else if (strncmp(irq_name, "dm_hs_phy", strlen("dm_hs_phy")) == 0)
> +		irq_index = DM_HS_PHY_IRQ_INDEX;
> +	else if (strncmp(irq_name, "ss_phy", strlen("ss_phy")) == 0)
> +		irq_index = SS_PHY_IRQ_INDEX;
> +	else if (strncmp(irq_name, "qusb2_phy", strlen("qusb2_phy")) == 0)
> +		irq_index = QUSB2_PHY_IRQ_INDEX;
> +	return irq_index;
> +}
> +
> +static int dwc3_qcom_get_port_index(const char *irq_name, int irq_index)
> +{
> +	int port_index = -1;
> +
> +	switch (irq_index) {
> +	case DP_HS_PHY_IRQ_INDEX:
> +		if (strcmp(irq_name, "dp_hs_phy_irq") == 0)
> +			port_index = 1;
> +		else
> +			sscanf(irq_name, "dp_hs_phy_%d", &port_index);
> +		break;
> +	case DM_HS_PHY_IRQ_INDEX:
> +		if (strcmp(irq_name, "dm_hs_phy_irq") == 0)
> +			port_index = 1;
> +		else
> +			sscanf(irq_name, "dm_hs_phy_%d", &port_index);
> +		break;
> +	case SS_PHY_IRQ_INDEX:
> +		if (strcmp(irq_name, "ss_phy_irq") == 0)
> +			port_index = 1;
> +		else
> +			sscanf(irq_name, "ss_phy_%d", &port_index);
> +		break;
> +	case QUSB2_PHY_IRQ_INDEX:
> +		port_index = 1;
> +		break;
> +	}
> +
> +	if (port_index <= 0 || port_index > DWC3_MAX_PORTS)
> +		port_index = -1;
> +
> +	return port_index;
> +}
> +
> +static int dwc3_qcom_get_acpi_index(struct dwc3_qcom *qcom, int irq_index,
> +				    int port_index)
> +{
> +	const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
> +
> +	/*
> +	 * Currently multiport supported targets don't have an ACPI variant.
> +	 * So return -1 if we are not dealing with first port of the controller.
> +	 */
> +	if (!pdata || port_index != 1)
> +		return -1;
> +
> +	return pdata->phy_irq_index[irq_index];
> +}
> +
>  static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
>  				 const char *name)
>  {
> @@ -554,44 +637,67 @@ static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
>  static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>  {
>  	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> -	const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
> +	struct device_node *np = pdev->dev.of_node;
> +	const char **irq_names;
> +	int port_index;
> +	int acpi_index;
> +	int irq_count;
> +	int irq_index;
>  	int irq;
>  	int ret;
> +	int i;
>  
> -	irq = dwc3_qcom_get_irq(pdev, "qusb2_phy",
> -				pdata ? pdata->qusb2_phy_irq_index : -1);
> -	if (irq > 0) {
> -		ret = dwc3_qcom_request_irq(qcom, irq, "hs_phy_irq");
> -		if (ret)
> -			return ret;
> -		qcom->qusb2_phy_irq = irq;
> -	}
> +	irq_count = of_property_count_strings(np, "interrupt-names");
> +	if (irq_count < 0)
> +		return -EINVAL;
>  
> -	irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
> -				pdata ? pdata->dp_hs_phy_irq_index : -1);
> -	if (irq > 0) {
> -		ret = dwc3_qcom_request_irq(qcom, irq, "dp_hs_phy_irq");
> -		if (ret)
> -			return ret;
> -		qcom->dp_hs_phy_irq = irq;
> -	}
> +	irq_names = devm_kcalloc(&pdev->dev, irq_count, sizeof(*irq_names), GFP_KERNEL);
> +	if (!irq_names)
> +		return -ENOMEM;
>  
> -	irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
> -				pdata ? pdata->dm_hs_phy_irq_index : -1);
> -	if (irq > 0) {
> -		ret = dwc3_qcom_request_irq(qcom, irq, "dm_hs_phy_irq");
> -		if (ret)
> -			return ret;
> -		qcom->dm_hs_phy_irq = irq;
> -	}
> +	ret = of_property_read_string_array(np, "interrupt-names",
> +					    irq_names, irq_count);
> +	if (!ret)
> +		return ret;
>  
> -	irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
> -				pdata ? pdata->ss_phy_irq_index : -1);
> -	if (irq > 0) {
> -		ret = dwc3_qcom_request_irq(qcom, irq, "ss_phy_irq");
> -		if (ret)
> -			return ret;
> -		qcom->ss_phy_irq = irq;
> +	for (i = 0; i < irq_count; i++) {
> +		irq_index = dwc3_qcom_get_irq_index(irq_names[i]);
> +		if (irq_index == -1) {
> +			dev_err(&pdev->dev, "Unknown interrupt-name \"%s\" found\n", irq_names[i]);
> +			continue;
> +		}
> +		port_index = dwc3_qcom_get_port_index(irq_names[i], irq_index);
> +		if (port_index == -1) {
> +			dev_err(&pdev->dev, "Invalid interrupt-name suffix \"%s\"\n", irq_names[i]);
> +			continue;
> +		}
> +
> +		acpi_index = dwc3_qcom_get_acpi_index(qcom, irq_index, port_index);
> +
> +		irq = dwc3_qcom_get_irq(pdev, irq_names[i], acpi_index);
> +		if (irq > 0) {
> +			ret = dwc3_qcom_request_irq(qcom, irq, irq_names[i]);
> +			if (ret)
> +				return ret;
> +
> +			switch (irq_index) {
> +			case DP_HS_PHY_IRQ_INDEX:
> +				qcom->port_info[port_index - 1].dp_hs_phy_irq = irq;
> +				break;
> +			case DM_HS_PHY_IRQ_INDEX:
> +				qcom->port_info[port_index - 1].dm_hs_phy_irq = irq;
> +				break;
> +			case SS_PHY_IRQ_INDEX:
> +				qcom->port_info[port_index - 1].ss_phy_irq = irq;
> +				break;
> +			case QUSB2_PHY_IRQ_INDEX:
> +				qcom->qusb2_phy_irq = irq;
> +				break;
> +			}
> +
> +			if (qcom->num_ports < port_index)
> +				qcom->num_ports = port_index;
> +		}
>  	}
>  
>  	return 0;
> @@ -1053,20 +1159,14 @@ static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
>  	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
>  	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
>  	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
> -	.qusb2_phy_irq_index = 1,
> -	.dp_hs_phy_irq_index = 4,
> -	.dm_hs_phy_irq_index = 3,
> -	.ss_phy_irq_index = 2
> +	.phy_irq_index = {4, 3, 2, 1},
>  };
>  
>  static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
>  	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
>  	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
>  	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
> -	.qusb2_phy_irq_index = 1,
> -	.dp_hs_phy_irq_index = 4,
> -	.dm_hs_phy_irq_index = 3,
> -	.ss_phy_irq_index = 2,
> +	.phy_irq_index = {4, 3, 2, 1},
>  	.is_urs = true,
>  };
>  
> -- 
> 2.34.1
>
Bjorn Andersson Feb. 9, 2024, 2:59 a.m. UTC | #4
On Tue, Feb 06, 2024 at 10:48:25AM +0530, Krishna Kurapati wrote:
> Power event IRQ stat registers are present for each port
> connected to controller. Add support for modifying all power event
> irq stat registers present in wrapper.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Regards,
Bjorn

> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 30 +++++++++++++++++++++++-------
>  1 file changed, 23 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 572dc3fdae12..e789745a9468 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -37,7 +37,11 @@
>  #define PIPE3_PHYSTATUS_SW			BIT(3)
>  #define PIPE_UTMI_CLK_DIS			BIT(8)
>  
> -#define PWR_EVNT_IRQ_STAT_REG			0x58
> +#define PWR_EVNT_IRQ1_STAT_REG			0x58
> +#define PWR_EVNT_IRQ2_STAT_REG			0x1dc
> +#define PWR_EVNT_IRQ3_STAT_REG			0x228
> +#define PWR_EVNT_IRQ4_STAT_REG			0x238
> +
>  #define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
>  #define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
>  
> @@ -109,6 +113,13 @@ struct dwc3_qcom {
>  	u8			num_ports;
>  };
>  
> +static const u32 pwr_evnt_irq_stat_reg_offset[DWC3_MAX_PORTS] = {
> +	PWR_EVNT_IRQ1_STAT_REG,
> +	PWR_EVNT_IRQ2_STAT_REG,
> +	PWR_EVNT_IRQ3_STAT_REG,
> +	PWR_EVNT_IRQ4_STAT_REG,
> +};
> +
>  static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
>  {
>  	u32 reg;
> @@ -444,9 +455,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
>  	if (qcom->is_suspended)
>  		return 0;
>  
> -	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
> -	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> -		dev_err(qcom->dev, "HS-PHY not in L2\n");
> +	for (i = 0; i < qcom->num_ports; i++) {
> +		val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg_offset[i]);
> +		if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> +			dev_err(qcom->dev, "Port-%d HS-PHY not in L2\n", i + 1);
> +	}
>  
>  	for (i = qcom->num_clocks - 1; i >= 0; i--)
>  		clk_disable_unprepare(qcom->clks[i]);
> @@ -491,9 +504,12 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
>  	if (ret)
>  		dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
>  
> -	/* Clear existing events from PHY related to L2 in/out */
> -	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
> -			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
> +	for (i = 0; i < qcom->num_ports; i++) {
> +		/* Clear existing events from PHY related to L2 in/out */
> +		dwc3_qcom_setbits(qcom->qscratch_base,
> +				  pwr_evnt_irq_stat_reg_offset[i],
> +				  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
> +	}
>  
>  	qcom->is_suspended = false;
>  
> -- 
> 2.34.1
>
Bjorn Andersson Feb. 9, 2024, 3 a.m. UTC | #5
On Tue, Feb 06, 2024 at 10:48:17AM +0530, Krishna Kurapati wrote:
> Add bindings to indicate properties required to support multiport
> on Synopsys DWC3 controller.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Regards,
Bjorn

> ---
>  .../devicetree/bindings/usb/snps,dwc3.yaml          | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> index 8f5d250070c7..9227e200bcab 100644
> --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> @@ -85,15 +85,16 @@ properties:
>  
>    phys:
>      minItems: 1
> -    maxItems: 2
> +    maxItems: 8
>  
>    phy-names:
>      minItems: 1
> -    maxItems: 2
> -    items:
> -      enum:
> -        - usb2-phy
> -        - usb3-phy
> +    maxItems: 8
> +    oneOf:
> +      - items:
> +          enum: [ usb2-phy, usb3-phy ]
> +      - items:
> +          pattern: "^usb[23]-[0-3]$"
>  
>    power-domains:
>      description:
> -- 
> 2.34.1
>
Rob Herring Feb. 13, 2024, 3:29 p.m. UTC | #6
On Tue, 06 Feb 2024 10:48:17 +0530, Krishna Kurapati wrote:
> Add bindings to indicate properties required to support multiport
> on Synopsys DWC3 controller.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
>  .../devicetree/bindings/usb/snps,dwc3.yaml          | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Thinh Nguyen Feb. 15, 2024, 11:48 p.m. UTC | #7
On Tue, Feb 06, 2024, Krishna Kurapati wrote:
> On multiport supported controllers, each port has its own DP/DM
> and SS (if super speed capable) interrupts. As per the bindings,
> their interrupt names differ from standard ones having "_x" added
> as suffix (x indicates port number). Refactor dwc3_qcom_setup_irq()
> call to parse multiport interrupts along with non-multiport ones.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 222 +++++++++++++++++++++++++----------
>  1 file changed, 161 insertions(+), 61 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 08df29584366..a20d63a791bd 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -53,17 +53,33 @@
>  #define APPS_USB_AVG_BW 0
>  #define APPS_USB_PEAK_BW MBps_to_icc(40)
>  
> +#define NUM_PHY_IRQ		4
> +
> +enum dwc3_qcom_phy_index {
> +	DP_HS_PHY_IRQ_INDEX,
> +	DM_HS_PHY_IRQ_INDEX,
> +	SS_PHY_IRQ_INDEX,
> +	QUSB2_PHY_IRQ_INDEX,
> +};
> +
>  struct dwc3_acpi_pdata {
>  	u32			qscratch_base_offset;
>  	u32			qscratch_base_size;
>  	u32			dwc3_core_base_size;
> -	int			qusb2_phy_irq_index;
> -	int			dp_hs_phy_irq_index;
> -	int			dm_hs_phy_irq_index;
> -	int			ss_phy_irq_index;
> +	/*
> +	 * The phy_irq_index corresponds to ACPI indexes of (in order)
> +	 * DP/DM/SS/QUSB2 IRQ's respectively.
> +	 */
> +	int			phy_irq_index[NUM_PHY_IRQ];
>  	bool			is_urs;
>  };
>  
> +struct dwc3_qcom_port {
> +	int			dp_hs_phy_irq;
> +	int			dm_hs_phy_irq;
> +	int			ss_phy_irq;
> +};
> +
>  struct dwc3_qcom {
>  	struct device		*dev;
>  	void __iomem		*qscratch_base;
> @@ -74,9 +90,7 @@ struct dwc3_qcom {
>  	struct reset_control	*resets;
>  
>  	int			qusb2_phy_irq;
> -	int			dp_hs_phy_irq;
> -	int			dm_hs_phy_irq;
> -	int			ss_phy_irq;
> +	struct dwc3_qcom_port	port_info[DWC3_MAX_PORTS];
>  	enum usb_device_speed	usb2_speed;
>  
>  	struct extcon_dev	*edev;
> @@ -91,6 +105,7 @@ struct dwc3_qcom {
>  	bool			pm_suspended;
>  	struct icc_path		*icc_path_ddr;
>  	struct icc_path		*icc_path_apps;
> +	u8			num_ports;
>  };
>  
>  static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
> @@ -375,16 +390,16 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
>  	dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
>  
>  	if (qcom->usb2_speed == USB_SPEED_LOW) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq);
>  	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
>  			(qcom->usb2_speed == USB_SPEED_FULL)) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq);
>  	} else {
> -		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> -		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq);
>  	}
>  
> -	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
> +	dwc3_qcom_disable_wakeup_irq(qcom->port_info[0].ss_phy_irq);
>  }
>  
>  static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> @@ -401,20 +416,20 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
>  	 */
>  
>  	if (qcom->usb2_speed == USB_SPEED_LOW) {
> -		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
> -						IRQ_TYPE_EDGE_FALLING);
> +		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq,
> +					    IRQ_TYPE_EDGE_FALLING);
>  	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
>  			(qcom->usb2_speed == USB_SPEED_FULL)) {
> -		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
> -						IRQ_TYPE_EDGE_FALLING);
> +		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq,
> +					    IRQ_TYPE_EDGE_FALLING);
>  	} else {
> -		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
> -						IRQ_TYPE_EDGE_RISING);
> -		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
> -						IRQ_TYPE_EDGE_RISING);
> +		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dp_hs_phy_irq,
> +					    IRQ_TYPE_EDGE_RISING);
> +		dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].dm_hs_phy_irq,
> +					    IRQ_TYPE_EDGE_RISING);
>  	}
>  
> -	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0);
> +	dwc3_qcom_enable_wakeup_irq(qcom->port_info[0].ss_phy_irq, 0);
>  }
>  
>  static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> @@ -535,6 +550,74 @@ static int dwc3_qcom_get_irq(struct platform_device *pdev,
>  	return ret;
>  }
>  
> +static int dwc3_qcom_get_irq_index(const char *irq_name)
> +{
> +	/*
> +	 * Parse IRQ index based on prefixes from interrupt name.
> +	 * Return -1 incase of an invalid interrupt name.
> +	 */
> +	int irq_index = -1;
> +
> +	if (strncmp(irq_name, "dp_hs_phy", strlen("dp_hs_phy")) == 0)
> +		irq_index = DP_HS_PHY_IRQ_INDEX;
> +	else if (strncmp(irq_name, "dm_hs_phy", strlen("dm_hs_phy")) == 0)
> +		irq_index = DM_HS_PHY_IRQ_INDEX;
> +	else if (strncmp(irq_name, "ss_phy", strlen("ss_phy")) == 0)
> +		irq_index = SS_PHY_IRQ_INDEX;
> +	else if (strncmp(irq_name, "qusb2_phy", strlen("qusb2_phy")) == 0)
> +		irq_index = QUSB2_PHY_IRQ_INDEX;
> +	return irq_index;
> +}
> +
> +static int dwc3_qcom_get_port_index(const char *irq_name, int irq_index)
> +{
> +	int port_index = -1;
> +
> +	switch (irq_index) {
> +	case DP_HS_PHY_IRQ_INDEX:
> +		if (strcmp(irq_name, "dp_hs_phy_irq") == 0)
> +			port_index = 1;
> +		else
> +			sscanf(irq_name, "dp_hs_phy_%d", &port_index);
> +		break;
> +	case DM_HS_PHY_IRQ_INDEX:
> +		if (strcmp(irq_name, "dm_hs_phy_irq") == 0)
> +			port_index = 1;
> +		else
> +			sscanf(irq_name, "dm_hs_phy_%d", &port_index);
> +		break;
> +	case SS_PHY_IRQ_INDEX:
> +		if (strcmp(irq_name, "ss_phy_irq") == 0)
> +			port_index = 1;
> +		else
> +			sscanf(irq_name, "ss_phy_%d", &port_index);
> +		break;
> +	case QUSB2_PHY_IRQ_INDEX:
> +		port_index = 1;
> +		break;
> +	}
> +
> +	if (port_index <= 0 || port_index > DWC3_MAX_PORTS)
> +		port_index = -1;
> +
> +	return port_index;
> +}
> +
> +static int dwc3_qcom_get_acpi_index(struct dwc3_qcom *qcom, int irq_index,
> +				    int port_index)
> +{
> +	const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
> +
> +	/*
> +	 * Currently multiport supported targets don't have an ACPI variant.
> +	 * So return -1 if we are not dealing with first port of the controller.
> +	 */
> +	if (!pdata || port_index != 1)
> +		return -1;
> +
> +	return pdata->phy_irq_index[irq_index];
> +}
> +
>  static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
>  				 const char *name)
>  {
> @@ -554,44 +637,67 @@ static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
>  static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>  {
>  	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> -	const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
> +	struct device_node *np = pdev->dev.of_node;
> +	const char **irq_names;
> +	int port_index;
> +	int acpi_index;
> +	int irq_count;
> +	int irq_index;
>  	int irq;
>  	int ret;
> +	int i;
>  
> -	irq = dwc3_qcom_get_irq(pdev, "qusb2_phy",
> -				pdata ? pdata->qusb2_phy_irq_index : -1);
> -	if (irq > 0) {
> -		ret = dwc3_qcom_request_irq(qcom, irq, "hs_phy_irq");
> -		if (ret)
> -			return ret;
> -		qcom->qusb2_phy_irq = irq;
> -	}
> +	irq_count = of_property_count_strings(np, "interrupt-names");
> +	if (irq_count < 0)
> +		return -EINVAL;
>  
> -	irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
> -				pdata ? pdata->dp_hs_phy_irq_index : -1);
> -	if (irq > 0) {
> -		ret = dwc3_qcom_request_irq(qcom, irq, "dp_hs_phy_irq");
> -		if (ret)
> -			return ret;
> -		qcom->dp_hs_phy_irq = irq;
> -	}
> +	irq_names = devm_kcalloc(&pdev->dev, irq_count, sizeof(*irq_names), GFP_KERNEL);
> +	if (!irq_names)
> +		return -ENOMEM;
>  
> -	irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
> -				pdata ? pdata->dm_hs_phy_irq_index : -1);
> -	if (irq > 0) {
> -		ret = dwc3_qcom_request_irq(qcom, irq, "dm_hs_phy_irq");
> -		if (ret)
> -			return ret;
> -		qcom->dm_hs_phy_irq = irq;
> -	}
> +	ret = of_property_read_string_array(np, "interrupt-names",
> +					    irq_names, irq_count);
> +	if (!ret)
> +		return ret;
>  
> -	irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
> -				pdata ? pdata->ss_phy_irq_index : -1);
> -	if (irq > 0) {
> -		ret = dwc3_qcom_request_irq(qcom, irq, "ss_phy_irq");
> -		if (ret)
> -			return ret;
> -		qcom->ss_phy_irq = irq;
> +	for (i = 0; i < irq_count; i++) {
> +		irq_index = dwc3_qcom_get_irq_index(irq_names[i]);
> +		if (irq_index == -1) {
> +			dev_err(&pdev->dev, "Unknown interrupt-name \"%s\" found\n", irq_names[i]);
> +			continue;
> +		}
> +		port_index = dwc3_qcom_get_port_index(irq_names[i], irq_index);
> +		if (port_index == -1) {
> +			dev_err(&pdev->dev, "Invalid interrupt-name suffix \"%s\"\n", irq_names[i]);
> +			continue;
> +		}
> +
> +		acpi_index = dwc3_qcom_get_acpi_index(qcom, irq_index, port_index);
> +
> +		irq = dwc3_qcom_get_irq(pdev, irq_names[i], acpi_index);
> +		if (irq > 0) {
> +			ret = dwc3_qcom_request_irq(qcom, irq, irq_names[i]);
> +			if (ret)
> +				return ret;
> +
> +			switch (irq_index) {
> +			case DP_HS_PHY_IRQ_INDEX:
> +				qcom->port_info[port_index - 1].dp_hs_phy_irq = irq;
> +				break;
> +			case DM_HS_PHY_IRQ_INDEX:
> +				qcom->port_info[port_index - 1].dm_hs_phy_irq = irq;
> +				break;
> +			case SS_PHY_IRQ_INDEX:
> +				qcom->port_info[port_index - 1].ss_phy_irq = irq;
> +				break;
> +			case QUSB2_PHY_IRQ_INDEX:
> +				qcom->qusb2_phy_irq = irq;
> +				break;
> +			}
> +
> +			if (qcom->num_ports < port_index)
> +				qcom->num_ports = port_index;
> +		}
>  	}
>  
>  	return 0;
> @@ -1053,20 +1159,14 @@ static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
>  	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
>  	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
>  	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
> -	.qusb2_phy_irq_index = 1,
> -	.dp_hs_phy_irq_index = 4,
> -	.dm_hs_phy_irq_index = 3,
> -	.ss_phy_irq_index = 2
> +	.phy_irq_index = {4, 3, 2, 1},
>  };
>  
>  static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
>  	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
>  	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
>  	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
> -	.qusb2_phy_irq_index = 1,
> -	.dp_hs_phy_irq_index = 4,
> -	.dm_hs_phy_irq_index = 3,
> -	.ss_phy_irq_index = 2,
> +	.phy_irq_index = {4, 3, 2, 1},
>  	.is_urs = true,
>  };
>  
> -- 
> 2.34.1
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

BR,
Thinh
Thinh Nguyen Feb. 15, 2024, 11:49 p.m. UTC | #8
On Tue, Feb 06, 2024, Krishna Kurapati wrote:
> Power event IRQ stat registers are present for each port
> connected to controller. Add support for modifying all power event
> irq stat registers present in wrapper.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 30 +++++++++++++++++++++++-------
>  1 file changed, 23 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 572dc3fdae12..e789745a9468 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -37,7 +37,11 @@
>  #define PIPE3_PHYSTATUS_SW			BIT(3)
>  #define PIPE_UTMI_CLK_DIS			BIT(8)
>  
> -#define PWR_EVNT_IRQ_STAT_REG			0x58
> +#define PWR_EVNT_IRQ1_STAT_REG			0x58
> +#define PWR_EVNT_IRQ2_STAT_REG			0x1dc
> +#define PWR_EVNT_IRQ3_STAT_REG			0x228
> +#define PWR_EVNT_IRQ4_STAT_REG			0x238
> +
>  #define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
>  #define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
>  
> @@ -109,6 +113,13 @@ struct dwc3_qcom {
>  	u8			num_ports;
>  };
>  
> +static const u32 pwr_evnt_irq_stat_reg_offset[DWC3_MAX_PORTS] = {
> +	PWR_EVNT_IRQ1_STAT_REG,
> +	PWR_EVNT_IRQ2_STAT_REG,
> +	PWR_EVNT_IRQ3_STAT_REG,
> +	PWR_EVNT_IRQ4_STAT_REG,
> +};
> +
>  static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
>  {
>  	u32 reg;
> @@ -444,9 +455,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
>  	if (qcom->is_suspended)
>  		return 0;
>  
> -	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
> -	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> -		dev_err(qcom->dev, "HS-PHY not in L2\n");
> +	for (i = 0; i < qcom->num_ports; i++) {
> +		val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg_offset[i]);
> +		if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> +			dev_err(qcom->dev, "Port-%d HS-PHY not in L2\n", i + 1);
> +	}
>  
>  	for (i = qcom->num_clocks - 1; i >= 0; i--)
>  		clk_disable_unprepare(qcom->clks[i]);
> @@ -491,9 +504,12 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
>  	if (ret)
>  		dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
>  
> -	/* Clear existing events from PHY related to L2 in/out */
> -	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
> -			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
> +	for (i = 0; i < qcom->num_ports; i++) {
> +		/* Clear existing events from PHY related to L2 in/out */
> +		dwc3_qcom_setbits(qcom->qscratch_base,
> +				  pwr_evnt_irq_stat_reg_offset[i],
> +				  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
> +	}
>  
>  	qcom->is_suspended = false;
>  
> -- 
> 2.34.1
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

BR,
Thinh