mbox series

[v2,0/3] arm64: qcom: add support for QCS8550 RB5gen2 board

Message ID 20240304055333.15952-1-quic_wasimn@quicinc.com
Headers show
Series arm64: qcom: add support for QCS8550 RB5gen2 board | expand

Message

Wasim Nazir March 4, 2024, 5:53 a.m. UTC 
RB5gen2 is Thundercomm's development platform used for IOT solutions.
It is based on Rb5gen2-SOM which is using QCOM's QCS8550 SoC.

On-board components:
- Qualcomm QCS8550 SoC
- LPDDR5, 12 GiB
- UFS3.1, 128 GiB
- USB3.1

On-board PMICs:
- PM8550VS
- PM8550VE
- PM8550
- PM8550BH
- PMK8550
- PMR735D
- PM8010

v1 -> v2:
 - Update board name from qcs8550-rb5gen2-hdk to qcs8550-rb5gen2.
 - Update SOM name to qcs8550-rb5gen2-som.
 - Remove qcm8550 from board definition.
 - Update DT files wrt board/som name changes.
 - Link to v1 [2].

This series depends on [1].

[1]: https://lore.kernel.org/all/20240301134113.14423-1-quic_tengfan@quicinc.com/
[2]: https://lore.kernel.org/all/20240202133638.4720-1-quic_wasimn@quicinc.com/

Wasim Nazir (3):
  dt-bindings: arm: qcom: Document rb5gen2 board
  arm64: dts: qcom: Add initial support for rb5gen2 SOM
  arm64: dts: qcom: Add initial support for rb5gen2 board

 .../devicetree/bindings/arm/qcom.yaml         |   7 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/qcs8550-rb5gen2-som.dtsi    | 438 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts  | 136 ++++++
 4 files changed, 582 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-som.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts

--
2.43.2