mbox series

[v5,0/6] soc: qcom: add in-kernel pd-mapper implementation

Message ID 20240419-qcom-pd-mapper-v5-0-e35b6f847e99@linaro.org
Headers show
Series soc: qcom: add in-kernel pd-mapper implementation | expand

Message

Dmitry Baryshkov April 19, 2024, 2 p.m. UTC
Protection domain mapper is a QMI service providing mapping between
'protection domains' and services supported / allowed in these domains.
For example such mapping is required for loading of the WiFi firmware or
for properly starting up the UCSI / altmode / battery manager support.

The existing userspace implementation has several issue. It doesn't play
well with CONFIG_EXTRA_FIRMWARE, it doesn't reread the JSON files if the
firmware location is changed (or if the firmware was not available at
the time pd-mapper was started but the corresponding directory is
mounted later), etc.

However this configuration is largely static and common between
different platforms. Provide in-kernel service implementing static
per-platform data.

Unlike previous revisions of the patchset, this iteration uses static
configuration per platform, rather than building it dynamically from the
list of DSPs being started.

--
2.39.2

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Sibi Sankar <quic_sibis@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Xilin Wu <wuxilin123@gmail.com>

Changes in v5:
- pdr: drop lock in pdr_register_listener, list_lock is already held (Chris Lew)
- pd_mapper: reworked to provide static configuration per platform
  (Bjorn)
- Link to v4: https://lore.kernel.org/r/20240311-qcom-pd-mapper-v4-0-24679cca5c24@linaro.org

Changes in v4:
- Fixed missing chunk, reenabled kfree in qmi_del_server (Konrad)
- Added configuration for sm6350 (Thanks to Luca)
- Removed RFC tag (Konrad)
- Link to v3: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-0-6858fa1ac1c8@linaro.org

Changes in RFC v3:
- Send start / stop notifications when PD-mapper domain list is changed
- Reworked the way PD-mapper treats protection domains, register all of
  them in a single batch
- Added SC7180 domains configuration based on TCL Book 14 GO
- Link to v2: https://lore.kernel.org/r/20240301-qcom-pd-mapper-v2-0-5d12a081d9d1@linaro.org

Changes in RFC v2:
- Swapped num_domains / domains (Konrad)
- Fixed an issue with battery not working on sc8280xp
- Added missing configuration for QCS404

---
Dmitry Baryshkov (6):
      soc: qcom: pdr: protect locator_addr with the main mutex
      soc: qcom: pdr: fix parsing of domains lists
      soc: qcom: pdr: extract PDR message marshalling data
      soc: qcom: qmi: add a way to remove running service
      soc: qcom: add pd-mapper implementation
      remoteproc: qcom: enable in-kernel PD mapper

 drivers/remoteproc/qcom_q6v5_adsp.c |  11 +-
 drivers/remoteproc/qcom_q6v5_mss.c  |  10 +-
 drivers/remoteproc/qcom_q6v5_pas.c  |  12 +-
 drivers/remoteproc/qcom_q6v5_wcss.c |  11 +-
 drivers/soc/qcom/Kconfig            |  15 +
 drivers/soc/qcom/Makefile           |   2 +
 drivers/soc/qcom/pdr_interface.c    |   6 +-
 drivers/soc/qcom/pdr_internal.h     | 318 ++----------------
 drivers/soc/qcom/qcom_pd_mapper.c   | 632 ++++++++++++++++++++++++++++++++++++
 drivers/soc/qcom/qcom_pdr_msg.c     | 349 ++++++++++++++++++++
 drivers/soc/qcom/qmi_interface.c    |  67 ++++
 include/linux/soc/qcom/pd_mapper.h  |  28 ++
 include/linux/soc/qcom/qmi.h        |   2 +
 13 files changed, 1161 insertions(+), 302 deletions(-)
---
base-commit: 7b4f2bc91c15fdcf948bb2d9741a9d7d54303f8d
change-id: 20240301-qcom-pd-mapper-e12d622d4ad0

Best regards,