Message ID | 20240626204033.255813-1-robdclark@gmail.com |
---|---|
Headers | show |
Series | io-pgtable-arm + drm/msm: Extend iova fault debugging | expand |
Hi Rob, On Wed, Jun 26, 2024 at 01:40:26PM -0700, Rob Clark wrote: > From: Rob Clark <robdclark@chromium.org> > > Add an io-pgtable method to walk the pgtable returning the raw PTEs that > would be traversed for a given iova access. > > Signed-off-by: Rob Clark <robdclark@chromium.org> > --- > drivers/iommu/io-pgtable-arm.c | 34 +++++++++++++++++++++++++--------- > include/linux/io-pgtable.h | 16 ++++++++++++++++ > 2 files changed, 41 insertions(+), 9 deletions(-) Non-technical question, but with patch 2/2 being drm-specific, how do you plan to get this merged this once it's finalised? I can take this part via the IOMMU tree? > +static phys_addr_t arm_lpae_iova_to_phys(struct io_pgtable_ops *ops, > + unsigned long iova) > +{ > + struct arm_lpae_io_pgtable *data = io_pgtable_ops_to_data(ops); > + struct io_pgtable_walk_data wd = {}; > + int ret, lvl; > + > + ret = arm_lpae_pgtable_walk(ops, iova, &wd); > + if (ret) > + return 0; > + > + lvl = wd.level + data->start_level; nit, but the level is architectural so I think we should initialise wd.level to data->start_level instead. > > -found_translation: > iova &= (ARM_LPAE_BLOCK_SIZE(lvl, data) - 1); > - return iopte_to_paddr(pte, data) | iova; > + return iopte_to_paddr(wd.ptes[wd.level - 1], data) | iova; > } > > static void arm_lpae_restrict_pgsizes(struct io_pgtable_cfg *cfg) > @@ -804,6 +819,7 @@ arm_lpae_alloc_pgtable(struct io_pgtable_cfg *cfg) > .map_pages = arm_lpae_map_pages, > .unmap_pages = arm_lpae_unmap_pages, > .iova_to_phys = arm_lpae_iova_to_phys, > + .pgtable_walk = arm_lpae_pgtable_walk, > }; > > return data; > diff --git a/include/linux/io-pgtable.h b/include/linux/io-pgtable.h > index 86cf1f7ae389..4d696724c7da 100644 > --- a/include/linux/io-pgtable.h > +++ b/include/linux/io-pgtable.h > @@ -171,12 +171,26 @@ struct io_pgtable_cfg { > }; > }; > > +/** > + * struct io_pgtable_walk_data - information from a pgtable walk > + * > + * @ptes: The recorded PTE values from the walk > + * @level: The level of the last PTE > + * > + * @level also specifies the last valid index in @ptes > + */ > +struct io_pgtable_walk_data { > + u64 ptes[4]; > + int level; > +}; I wonder if we can do better than hardcoding the '4' here? I wouldn't be surprised if this doesn't work, but could we do something along the lines of: struct io_pgtable_walk_data { int level; int num_levels; u64 ptes[] __counted_by(num_levels); }; and then have the Arm (LPAE)-specific code wrap that in a private structure: struct arm_lpae_io_pgtable_walk_data { struct io_pgtable_walk_data data; u64 ptes[ARM_LPAE_MAX_LEVELS]; }; which is used by the walker? Will
On Wed, Jul 3, 2024 at 8:02 AM Will Deacon <will@kernel.org> wrote: > > Hi Rob, > > On Wed, Jun 26, 2024 at 01:40:26PM -0700, Rob Clark wrote: > > From: Rob Clark <robdclark@chromium.org> > > > > Add an io-pgtable method to walk the pgtable returning the raw PTEs that > > would be traversed for a given iova access. > > > > Signed-off-by: Rob Clark <robdclark@chromium.org> > > --- > > drivers/iommu/io-pgtable-arm.c | 34 +++++++++++++++++++++++++--------- > > include/linux/io-pgtable.h | 16 ++++++++++++++++ > > 2 files changed, 41 insertions(+), 9 deletions(-) > > Non-technical question, but with patch 2/2 being drm-specific, how do > you plan to get this merged this once it's finalised? I can take this > part via the IOMMU tree? I guess if need be, I could merge the drm part only after the iommu part lands. We've lived with an earlier iteration of these series as downstream patches in the CrOS kernel for this long, it isn't the end of the world if it takes a bit longer > > +static phys_addr_t arm_lpae_iova_to_phys(struct io_pgtable_ops *ops, > > + unsigned long iova) > > +{ > > + struct arm_lpae_io_pgtable *data = io_pgtable_ops_to_data(ops); > > + struct io_pgtable_walk_data wd = {}; > > + int ret, lvl; > > + > > + ret = arm_lpae_pgtable_walk(ops, iova, &wd); > > + if (ret) > > + return 0; > > + > > + lvl = wd.level + data->start_level; > > nit, but the level is architectural so I think we should initialise > wd.level to data->start_level instead. Hmm, I wanted to use wd.level to get the index of the last entry in wd.ptes. Perhaps I should just call it something other than 'level' instead? > > > > -found_translation: > > iova &= (ARM_LPAE_BLOCK_SIZE(lvl, data) - 1); > > - return iopte_to_paddr(pte, data) | iova; > > + return iopte_to_paddr(wd.ptes[wd.level - 1], data) | iova; > > } > > > > static void arm_lpae_restrict_pgsizes(struct io_pgtable_cfg *cfg) > > @@ -804,6 +819,7 @@ arm_lpae_alloc_pgtable(struct io_pgtable_cfg *cfg) > > .map_pages = arm_lpae_map_pages, > > .unmap_pages = arm_lpae_unmap_pages, > > .iova_to_phys = arm_lpae_iova_to_phys, > > + .pgtable_walk = arm_lpae_pgtable_walk, > > }; > > > > return data; > > diff --git a/include/linux/io-pgtable.h b/include/linux/io-pgtable.h > > index 86cf1f7ae389..4d696724c7da 100644 > > --- a/include/linux/io-pgtable.h > > +++ b/include/linux/io-pgtable.h > > @@ -171,12 +171,26 @@ struct io_pgtable_cfg { > > }; > > }; > > > > +/** > > + * struct io_pgtable_walk_data - information from a pgtable walk > > + * > > + * @ptes: The recorded PTE values from the walk > > + * @level: The level of the last PTE > > + * > > + * @level also specifies the last valid index in @ptes > > + */ > > +struct io_pgtable_walk_data { > > + u64 ptes[4]; > > + int level; > > +}; > > I wonder if we can do better than hardcoding the '4' here? I wouldn't be > surprised if this doesn't work, but could we do something along the > lines of: > > struct io_pgtable_walk_data { > int level; > int num_levels; > u64 ptes[] __counted_by(num_levels); > }; > > and then have the Arm (LPAE)-specific code wrap that in a private > structure: > > struct arm_lpae_io_pgtable_walk_data { > struct io_pgtable_walk_data data; > u64 ptes[ARM_LPAE_MAX_LEVELS]; > }; > > which is used by the walker? I guess we could just make the walk_data fxn ptr arg a void* and rename io_pgtable_walk_data -> io_lpae_pgtable_walk_data? I'm not sure how hard to try to make this interface generic when I think it is probably only going to be used by code that knows what pgtable format is used. It's kinda the same question about what type to use for the pte. Maybe the answer is just "it's pgtable format dependent"? BR, -R
On Wed, Jul 03, 2024 at 09:18:43AM -0700, Rob Clark wrote: > On Wed, Jul 3, 2024 at 8:02 AM Will Deacon <will@kernel.org> wrote: > > > > Hi Rob, > > > > On Wed, Jun 26, 2024 at 01:40:26PM -0700, Rob Clark wrote: > > > From: Rob Clark <robdclark@chromium.org> > > > > > > Add an io-pgtable method to walk the pgtable returning the raw PTEs that > > > would be traversed for a given iova access. > > > > > > Signed-off-by: Rob Clark <robdclark@chromium.org> > > > --- > > > drivers/iommu/io-pgtable-arm.c | 34 +++++++++++++++++++++++++--------- > > > include/linux/io-pgtable.h | 16 ++++++++++++++++ > > > 2 files changed, 41 insertions(+), 9 deletions(-) > > > > Non-technical question, but with patch 2/2 being drm-specific, how do > > you plan to get this merged this once it's finalised? I can take this > > part via the IOMMU tree? > > I guess if need be, I could merge the drm part only after the iommu > part lands. We've lived with an earlier iteration of these series as > downstream patches in the CrOS kernel for this long, it isn't the end > of the world if it takes a bit longer We should try not to split series up, there are too many cases where the other parts don't make it and we end up with some cruft. This is only two patches, get iommu or DRM to ack their parts and send it through one tree. Jason
From: Rob Clark <robdclark@chromium.org> This series extends io-pgtable-arm with a method to retrieve the page table entries traversed in the process of address translation, and then beefs up drm/msm gpu devcore dump to include this (and additional info) in the devcore dump. This is a respin of https://patchwork.freedesktop.org/series/94968/ (minus a patch that was already merged) v2: Fix an armv7/32b build error in the last patch v3: Incorperate Will Deacon's suggestion to make the interface callback based. v4: Actually wire up the callback v5: Drop the callback approach Rob Clark (2): iommu/io-pgtable-arm: Add way to debug pgtable walk drm/msm: Extend gpu devcore dumps with pgtbl info drivers/gpu/drm/msm/adreno/adreno_gpu.c | 10 ++++++++ drivers/gpu/drm/msm/msm_gpu.c | 9 +++++++ drivers/gpu/drm/msm/msm_gpu.h | 8 ++++++ drivers/gpu/drm/msm/msm_iommu.c | 25 ++++++++++++++++++ drivers/gpu/drm/msm/msm_mmu.h | 3 ++- drivers/iommu/io-pgtable-arm.c | 34 ++++++++++++++++++------- include/linux/io-pgtable.h | 16 ++++++++++++ 7 files changed, 95 insertions(+), 10 deletions(-)