mbox series

[v3,0/4] Add CMN PLL clock controller driver for IPQ9574

Message ID 20240827-qcom_ipq_cmnpll-v3-0-8e009cece8b2@quicinc.com
Headers show
Series Add CMN PLL clock controller driver for IPQ9574 | expand

Message

Luo Jie Aug. 27, 2024, 12:45 p.m. UTC 
The CMN PLL clock controller in Qualcomm IPQ chipsets provides
the clocks to the networking hardware blocks that are internal or
external to the SoC. This driver configures the CMN PLL clock
controller to enable the output clocks to such networking hardware
blocks. These networking blocks include the internal PPE (Packet
Process Engine), external connected Ethernet PHY, or external switch.
 
The controller expects the input reference clock from the internal
Wi-Fi block acting as the clock source. The output clocks supplied
by the controller are fixed rate clocks.

The CMN PLL hardware block does not include any other function other
than enabling the clocks to the networking hardware blocks.

The driver is being enabled to support IPQ9574 SoC initially, and
will be extended for other SoCs.

Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
Changes in v3:
- Update description of dt-binding to explain scope of 'CMN' in CMN PLL.
- Collect Reviewed-by tags for dtbindings and defconfig patches.
- Enable PLL_LOCKED check for the stability of output clocks.
- Link to v2: https://lore.kernel.org/r/20240820-qcom_ipq_cmnpll-v2-0-b000dd335280@quicinc.com

Changes in v2:
- Rename the dt-binding file with the compatible.
- Remove property 'clock-output-names' from dt-bindings and define
  names in the driver. Add qcom,ipq-cmn-pll.h to export the output
  clock specifier.
- Alphanumeric ordering of 'cmn_pll_ref_clk' node in DTS.
- Fix allmodconfig error reported by test robot.
- Replace usage of "common" to "CMN" to match the name with the
  hardware specification.
- Clarify in commit message on scope of CMN PLL function.
- Link to v1: https://lore.kernel.org/r/20240808-qcom_ipq_cmnpll-v1-0-b0631dcbf785@quicinc.com

---
Luo Jie (4):
      dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC
      clk: qcom: Add CMN PLL clock controller driver for IPQ SoC
      arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller
      arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC

 .../bindings/clock/qcom,ipq9574-cmn-pll.yaml       |  72 ++++++
 arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi   |   6 +-
 arch/arm64/boot/dts/qcom/ipq9574.dtsi              |  17 +-
 arch/arm64/configs/defconfig                       |   1 +
 drivers/clk/qcom/Kconfig                           |  10 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/clk-ipq-cmn-pll.c                 | 241 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,ipq-cmn-pll.h       |  15 ++
 8 files changed, 361 insertions(+), 2 deletions(-)
---
base-commit: 222a3380f92b8791d4eeedf7cd750513ff428adf
change-id: 20240808-qcom_ipq_cmnpll-7c1119b25037

Best regards,