mbox series

[v4,0/4] Enable Bluetooth on qcs6490-rb3gen2 board

Message ID 20241204131706.20791-1-quic_janathot@quicinc.com
Headers show
Series Enable Bluetooth on qcs6490-rb3gen2 board | expand

Message

Janaki Ramaiah Thota Dec. 4, 2024, 1:17 p.m. UTC 
- Patch 1/4 Add description of the PMU of the WCN6750 module.
- Patch 2/4 add and enable BT node for qcs6490-rb3gen board.
- Patch 3/4 use the power sequencer for wcn6750.
- Patch 4/4 add support for the WCN6750 PMU.

----
Changes from v3:
* Defined the PMU node and used the its output to power up BT
* Used power sequencer for wcn wcn6750 module
* Split the patch to multiple as per subtree
* Add description of the PMU of the WCN6750 module
* Include separate UART state node for sleep pin configuarion
* Link to v3: https://lore.kernel.org/linux-arm-msm/20241022104600.3228-1-quic_janathot@quicinc.com/
Changes from v2:
* Sorted nodes alphabetically
* Link to v2: https://lore.kernel.org/linux-arm-msm/20241010105107.30118-1-quic_janathot@quicinc.com/
Changes from v1:
* Corrected the board name in subject
* Link to v1: https://lore.kernel.org/linux-arm-msm/20241009111436.23473-1-quic_janathot@quicinc.com/
Janaki Ramaiah Thota (4):
  regulator:·dt-bindings:·qcom,qca6390-pmu:·document wcn6750-pmu
  arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node
  Bluetooth: hci_qca: use the power sequencer for wcn6750
  power: sequencing: qcom-wcn: add support for the WCN6750 PMU

 .../bindings/regulator/qcom,qca6390-pmu.yaml  |  27 +++
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts  | 165 +++++++++++++++++-
 drivers/bluetooth/hci_qca.c                   |   2 +-
 drivers/power/sequencing/pwrseq-qcom-wcn.c    |  22 +++
 4 files changed, 214 insertions(+), 2 deletions(-)