mbox series

[v2,0/3] arm64: dts: qcom: Introduce Huawei Matebook E Go

Message ID 20241220160530.444864-1-mitltlatltl@gmail.com
Headers show
Series arm64: dts: qcom: Introduce Huawei Matebook E Go | expand

Message

Pengyu Luo Dec. 20, 2024, 4:05 p.m. UTC
Add support for the SC8280XP-based Huawei Matebook E Go (sc8280xp)

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
Changes in v2:
- use Co-developed-by: tag (Konrad)
- follow this order (property-n property-names) (Konrad)
- add a label for tablet mode switch (Konrad)
- handle line breaks properly (Konrad)
- remove the wlan calibration variant (Konrad)
- drop the venus node, as upstream has not supported it now
- Link to v1: https://lore.kernel.org/linux-arm-msm/20241211153754.356476-1-mitltlatltl@gmail.com

---
Pengyu Luo (3):
  dt-bindings: arm: qcom: Document Huawei Matebook E Go (sc8280xp)
  firmware: qcom: scm: Allow QSEECOM on Huawei Matebook E Go (sc8280xp)
  arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp)

 .../devicetree/bindings/arm/qcom.yaml         |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 .../boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 1318 +++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c              |    1 +
 4 files changed, 1321 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts