mbox series

[v3,0/6] Add dt-bindings and dtsi changes for CAMSS on x1e80100 silicon

Message ID 20250102-b4-linux-next-24-11-18-dtsi-x1e80100-camss-v3-0-cb66d55d20cc@linaro.org
Headers show
Series Add dt-bindings and dtsi changes for CAMSS on x1e80100 silicon | expand

Message

Bryan O'Donoghue Jan. 2, 2025, 4:32 p.m. UTC 
v3:
- Fixes ordering of headers in dtsi - Vlad
- Changes camcc to always on - Vlad
- Applies RB as indicated - Krzysztof, Konrad
- Link to v2: https://lore.kernel.org/r/20241227-b4-linux-next-24-11-18-dtsi-x1e80100-camss-v2-0-06fdd5a7d5bb@linaro.org

v2:

I've gone through each comment and implemented each suggestion since IMO
they were all good/correct comments.

Detail:

- Moves x1e80100 camcc to its own yaml - Krzysztof
- csid_wrapper comes first because it is the most relevant
  register set - configuring all CSID blocks subordinate to it - bod, Krzysztof
- Fixes missing commit log - Krz
- Updates to latest format established @ sc7280 - bod
- Includes CSID lite which I forgot to add @ v1 - Konrad, bod
- Replaces static ICC parameters with defines - Konrad
- Drops newlines between x and x-name - Konrad
- Drops redundant iommu extents - Konrad
- Leaves CAMERA_AHB_CLK as-is - Kronrad, Dmitry
  Link: https://lore.kernel.org/r/3f1a960f-062e-4c29-ae7d-126192f35a8b@oss.qualcomm.com
- Interrupt EDGE_RISING - Vladimir
- Implements suggested regulator names pending refactor to PHY API - Vladimir
- Drop slow_ahb_src clock - Vladimir

Link to v1:
https://lore.kernel.org/r/20241119-b4-linux-next-24-11-18-dtsi-x1e80100-camss-v1-0-54075d75f654@linaro.org

Working tree:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/arm-laptop/wip/x1e80100-6.13-rc3

v1:

This series adds dt-bindings and dtsi for CAMSS on x1e80100.

The primary difference between x1e80100 and other platforms is a new VFE
and CSID pair at version 680.

Some minor driver churn will be required to support outside of the new VFE
and CSID blocks but nothing too major.

The CAMCC in this silicon requires two, not one power-domain requiring
either this fix I've proposed here or something similar:

https://lore.kernel.org/linux-arm-msm/bad60452-41b3-42fb-acba-5b7226226d2d@linaro.org/T/#t

That doesn't gate adoption of the binding description though.

A working tree in progress can be found here:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/x1e80100-6.12-rc7+camss?ref_type=heads

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
Bryan O'Donoghue (6):
      dt-bindings: i2c: qcom-cci: Document x1e80100 compatible
      dt-bindings: clock: move qcom,x1e80100-camcc to its own file
      dt-bindings: media: Add qcom,x1e80100-camss
      arm64: dts: qcom: x1e80100: Add CAMCC block definition
      arm64: dts: qcom: x1e80100: Add CCI definitions
      arm64: dts: qcom: x1e80100: Add CAMSS block definition

 .../bindings/clock/qcom,sm8450-camcc.yaml          |   2 -
 .../bindings/clock/qcom,x1e80100-camcc.yaml        |  74 +++++
 .../devicetree/bindings/i2c/qcom,i2c-cci.yaml      |   2 +
 .../bindings/media/qcom,x1e80100-camss.yaml        | 367 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100.dtsi             | 351 ++++++++++++++++++++
 5 files changed, 794 insertions(+), 2 deletions(-)
---
base-commit: e25c8d66f6786300b680866c0e0139981273feba
change-id: 20241119-b4-linux-next-24-11-18-dtsi-x1e80100-camss-82a63736d072

Best regards,