mbox series

[0/5] arm64: dts: qcom: x1e80100-hp-x14: add usb-1-ss1-sbu-mux

Message ID 20250410-hp-x14-v1-0-b4e5ca253ec9@oldschoolsolutions.biz
Headers show
Series arm64: dts: qcom: x1e80100-hp-x14: add usb-1-ss1-sbu-mux | expand

Message

Jens Glathe via B4 Relay April 10, 2025, 9:13 a.m. UTC
The usb_1_1 port doesn't have the PS8830 repeater, but apparently some
MUX for DP altmode control. After a suggestion from sgerhold on
'#aarch64-laptops' I added gpio-sbu-mux nodes from the x1e80100-QCP
tree, and this appears to work well. It is still guesswork, but
working guesswork.

Added and rewired for usb_1_1

Also, did some more changes as tested here:

- remove unused retimer, regulators, pinctrls 
- remove unused i2c buses
- amend order of nodes
- explicitly activate smb2360 eUSB2 repeaters for the type-c connectors.

Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
Jens Glathe (5):
      arm64: dts: qcom: x1e80100-hp-x14: add usb-1-ss1-sbu-mux
      arm64: dts: qcom: x1e80100-hp-x14: remove PS8830 retimer 1 definitions
      arm64: dts: qcom: x1e80100-hp-x14: remove unused i2c buses
      arm64: dts: qcom: x1e80100-hp-x14: amend order of nodes
      arm64: dts: qcom: x1e80100-hp-x14: explicitly enable smb2360 eUSB2 repeaters

 .../boot/dts/qcom/x1e80100-hp-omnibook-x14.dts     | 236 ++++++---------------
 1 file changed, 66 insertions(+), 170 deletions(-)
---
base-commit: 46086739de22d72319e37c37a134d32db52e1c5c
change-id: 20250409-hp-x14-0f1d86bcb699

Best regards,