mbox series

[v3,0/3] HP EliteBook Ultra G1q support

Message ID 20250416094236.312079-1-juerg.haefliger@canonical.com
Headers show
Series HP EliteBook Ultra G1q support | expand

Message

Juerg Haefliger April 16, 2025, 9:42 a.m. UTC 
Add support for the HP EliteBook Ultra G1q 14" AI laptop.

Based on HWINFO64 and APCI tables, it seems to be the same HW as the
HP OmniBook X 14.

v2->v3:
  - Drop status properties from nodes in patch 3/3
  - Add acked-by-krzk to patch 2/3
v1->v2:
  - Don't rename the X14 dts to dtsi and directly include the dts
  - Add a label to the sound node and use that to override the model
  - Reorder the dt doc patch before the dt usage


Juerg Haefliger (3):
  arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull
    out the model
  dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q
  arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook
    Ultra G1q

 .../devicetree/bindings/arm/qcom.yaml         |  1 +
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts  | 30 +++++++++++++++++++
 .../dts/qcom/x1e80100-hp-omnibook-x14.dts     |  7 +++--
 drivers/firmware/qcom/qcom_scm.c              |  1 +
 5 files changed, 38 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts

Comments

Rob Herring April 16, 2025, 12:43 p.m. UTC | #1 
On Wed, 16 Apr 2025 11:42:33 +0200, Juerg Haefliger wrote:
> Add support for the HP EliteBook Ultra G1q 14" AI laptop.
> 
> Based on HWINFO64 and APCI tables, it seems to be the same HW as the
> HP OmniBook X 14.
> 
> v2->v3:
>   - Drop status properties from nodes in patch 3/3
>   - Add acked-by-krzk to patch 2/3
> v1->v2:
>   - Don't rename the X14 dts to dtsi and directly include the dts
>   - Add a label to the sound node and use that to override the model
>   - Reorder the dt doc patch before the dt usage
> 
> 
> Juerg Haefliger (3):
>   arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull
>     out the model
>   dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q
>   arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook
>     Ultra G1q
> 
>  .../devicetree/bindings/arm/qcom.yaml         |  1 +
>  arch/arm64/boot/dts/qcom/Makefile             |  1 +
>  .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts  | 30 +++++++++++++++++++
>  .../dts/qcom/x1e80100-hp-omnibook-x14.dts     |  7 +++--
>  drivers/firmware/qcom/qcom_scm.c              |  1 +
>  5 files changed, 38 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts
> 
> --
> 2.43.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/next-20250416 (best guess, 1/4 blobs matched)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250416094236.312079-1-juerg.haefliger@canonical.com:

arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dtb: pinctrl@f100000 (qcom,x1e80100-tlmm): Unevaluated properties are not allowed ('bt-en-sleep' was unexpected)
	from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml#