| Message ID | a2cb1290-9e01-4136-9592-ce439b1096b6@freebox.fr |
|---|---|
| Headers | show |
| Series | HDMI TX support in msm8998 | expand |
On Tue, Jun 04, 2024 at 03:47:57PM +0200, Marc Gonzalez wrote: > MSM8998 GPIO pin controller reference design defines: > > - CEC: pin 31 > - DDC: pin 32,33 > - HPD: pin 34 > > Downstream vendor code for reference: > > https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi#L2324-2400 > > mdss_hdmi_{cec,ddc,hpd}_{active,suspend} > > Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> > --- > arch/arm64/boot/dts/qcom/msm8998.dtsi | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On Tue, 04 Jun 2024 15:46:03 +0200, Marc Gonzalez wrote: > HDMI PHY block embedded in the APQ8098. > > Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> > --- > Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml | 1 + > 1 file changed, 1 insertion(+) > Acked-by: Rob Herring (Arm) <robh@kernel.org>
DT bits required for HDMI TX support in APQ8098 (msm8998 cousin) $ make -j20 dtbs_check DTC_CHK arch/arm64/boot/dts/qcom/msm8998-mtp.dtb /home/mgonzalez/linux/arch/arm64/boot/dts/qcom/msm8998-mtp.dtb: pcie@1c00000: False schema does not allow {'compatible': ['qcom,pcie-msm8998', 'qcom,pcie-msm8996'], 'reg': [[29360128, 8192], [452984832, 3869], [452988704, 168], [454033408, 1048576]], 'reg-names': ['parf', 'dbi', 'elbi', 'config'], 'device_type': ['pci'], 'linux,pci-domain': [[0]], 'bus-range': [[0, 255]], '#address-cells': [[3]], '#size-cells': [[2]], 'num-lanes': [[1]], 'phys': [[36]], 'phy-names': ['pciephy'], 'status': ['okay'], 'ranges': [[16777216, 0, 0, 455081984, 0, 1048576], [33554432, 0, 456130560, 456130560, 0, 13631488]], '#interrupt-cells': [[1]], 'interrupts': [[0, 405, 4]], 'interrupt-names': ['msi'], 'interrupt-map-mask': [[0, 0, 0, 7]], 'interrupt-map': [[0, 0, 0, 1, 1, 0, 0, 135, 4], [0, 0, 0, 2, 1, 0, 0, 136, 4], [0, 0, 0, 3, 1, 0, 0, 138, 4], [0, 0, 0, 4, 1, 0, 0, 139, 4]], 'clocks': [[37, 94], [37, 91], [37, 92], [37, 93], [37, 95]], 'clock-names': ['pipe', 'aux', 'cfg', 'bus_master', 'bus_slave'], 'power-domains': [[37, 0]], 'iommu-map': [[256, 38, 5248, 1]], 'perst-gpios': [[39, 35, 1]], 'pcie@0': {'device_type': ['pci'], 'reg': [[0, 0, 0, 0, 0]], 'bus-range': [[1, 255]], '#address-cells': [[3]], '#size-cells': [[2]], 'ranges': True}, '$nodename': ['pcie@1c00000']} from schema $id: http://devicetree.org/schemas/pci/qcom,pcie.yaml# /home/mgonzalez/linux/arch/arm64/boot/dts/qcom/msm8998-mtp.dtb: pcie@1c00000: Unevaluated properties are not allowed ('#address-cells', '#interrupt-cells', '#size-cells', 'bus-range', 'device_type', 'interrupt-map', 'interrupt-map-mask', 'linux,pci-domain', 'num-lanes', 'pcie@0', 'ranges' were unexpected) from schema $id: http://devicetree.org/schemas/pci/qcom,pcie.yaml# /home/mgonzalez/linux/arch/arm64/boot/dts/qcom/msm8998-mtp.dtb: phy@c012000: 'vdd-supply' is a required property from schema $id: http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml# /home/mgonzalez/linux/arch/arm64/boot/dts/qcom/msm8998-mtp.dtb: clock-controller@c8c0000: clocks: [[34, 0], [37, 178], [150, 1], [150, 0], [151, 1], [151, 0], [152], [0], [0], [0], [37, 184]] is too long from schema $id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml# Arnaud Vrac (1): arm64: dts: qcom: add HDMI nodes for msm8998 Marc Gonzalez (3): dt-bindings: display/msm: hdmi: add qcom,hdmi-phy-8998 dt-bindings: display/msm: hdmi: add qcom,hdmi-tx-8998 arm64: dts: qcom: msm8998: add HDMI GPIOs Documentation/devicetree/bindings/display/msm/hdmi.yaml | 26 ++++++++++- Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml | 1 + arch/arm64/boot/dts/qcom/msm8998.dtsi | 128 ++++++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 152 insertions(+), 3 deletions(-)